Personalized alignment techniques better restore the native trochlear groove compared to systematic alignment techniques in total knee arthroplasty

PURPOSE

The relationship between constitutional coronal alignment and implant positioning on trochlear groove restoration in total knee arthroplasty (TKA) is poorly understood. This study aimed to determine whether the choice of alignment philosophy significantly affects the restoration of the trochlea groove.

METHODS

Sixty-one imageless robotic TKAs performed by a single orthopaedic surgeon were retrospectively reviewed. In each case, the entire native trochlea was digitized to generate the native femoral anatomy, and implants were planned according to a functional alignment (FA) technique. Final implant position was recorded using the validated bone resection planes from the navigation system. Simulated femoral component positions were generated according to previously described alignment techniques: mechanical alignment (MA), gap balancing (GB), kinematic alignment (KA), restricted kinematic alignment (rKA) and restricted inverse kinematic alignment (riKA). Trochlear angle (TA), trochlear under/overstuffing and mediolateral sulcus offset were compared between the six simulated alignment techniques, as well as the final implanted technique. Further analyses investigated the effect of preoperative coronal alignment on trochlear position. Comparisons were assessed with an analysis of variance and Welch's t-tests or Wilcoxon's rank-sum tests with Bonferroni corrections.

RESULTS

The implanted and simulated techniques all resulted in greater TA valgus compared to the native groove (p < 0.001). The implanted technique, KA and rKA were closer to the native TA than GB, MA and riKA (p > 0.001). All alignment philosophies understuffed the native trochlea groove. KA and rKA understuffed less than all other techniques (p < 0.001), and GB understuffed more than all other techniques (p < 0.001). In extension, all techniques shifted the trochlear sulcus laterally, while in flexion, they medialized it. These effects were most prominent in GB and MA.

CONCLUSION

Personalized alignment techniques such as KA and rKA, which consider variations in individual anatomy, best restore the native patellar groove compared to systematic alignment techniques when using a standardized femoral component.

LEVEL OF EVIDENCE

Level III, retrospective review.

Imageless robotic total knee arthroplasty determines similar coronal plane alignment of the knee (CPAK) parameters to long leg radiographs

BACKGROUND

The coronal plane alignment of the knee (CPAK) classification was first developed using long leg radiographs (LLR) and has since been reported using image-based and imageless robotic total knee arthroplasty (TKA) systems. However, the correspondence between imageless robotics and LLR-derived CPAK parameters has yet to be investigated. This study therefore examined the differences in CPAK parameters determined with LLR and imageless robotic navigation using either generic or optimized cartilage wear assumptions.

METHODS

Medial proximal tibial angle (MPTA) and lateral distal femoral angle (LDFA) were determined from the intraoperative registration data of 61 imageless robotic TKAs using either a generic 2 mm literature-based wear assumption (Navlit) or an optimized wear assumption (Navopt) found using an error minimization algorithm. MPTA and LDFA were also measured from preoperative LLR by two observers and intraclass correlation coefficients (ICCs) were calculated. MPTA, LDFA, joint line obliquity (JLO), and arithmetic hip-knee-ankle angle (aHKA) were compared between the robotic and the average LLR measurements over the two observers.

RESULTS

ICCs between observers for LLR were over 0.95 for MPTA, LDFA, JLO, and aHKA, indicating excellent agreement. Mean CPAK differences were not significant between LLR and Navlit (all differences within 0.6°, P > 0.1) or Navopt (all within 0.1°, P > 0.83). Mean absolute errors (MAE) between LLR and Navlit were: LDFA = 1.4°, MPTA = 2.0°, JLO = 2.1°, and aHKA = 2.7°. Compared to LLR, the generic wear classified 88% and the optimized wear classified 94% of knees within one CPAK group. Bland-Altman comparisons reported good agreement for LLR vs. Navlit and Navopt, with > 95% and > 91.8% of measurements within the limits of agreement across all CPAK parameters, respectively.

CONCLUSIONS

Imageless robotic navigation data can be used to calculate CPAK parameters for arthritic knees undergoing TKA with good agreement to LLR. Generic wear assumptions determined MPTA and LDFA with MAE within 2° and optimizing wear assumptions showed negligible improvement.

Restricted Inverse Kinematic Alignment Better Restores the Native Joint Line Orientation While Achieving Similar Balance, Laxity, and Arithmetic Hip-Knee-Ankle Angle to Gap Balancing Total Knee Arthroplasty

Background

Both restricted inverse kinematic alignment (iKA) and gap balancing aim for a balanced total knee arthroplasty by adjusting femoral component position based on ligamentous gaps. However, iKA targets a native tibial joint line vs resecting perpendicular to the mechanical axis. This study compares how these 2 techniques impact the balance and laxity throughout flexion and joint line obliquity (JLO), arithmetic hip-knee-ankle angle (aHKA), and the coronal plane alignment of the knee (CPAK).

Methods

Two surgeons performed 75 robot-assisted iKA total knee arthroplasties. A digital joint tensioner collected laxity data throughout flexion before femoral resection. The femoral component position was determined using predictive gap-planning to optimize the balance throughout flexion. Planned gap balancing (pGB) simulations were performed for each case using neutral tibial resections. Mediolateral balance, laxity, and CPAK were compared among pGB, planned iKA (piKA), and final iKA.

Results

Both piKA and pGB had similar mediolateral balance and laxity, with mean differences <0.4 mm. piKA had a lower mean absolute difference from native JLO than pGB (3 ± 2° vs 7 ± 4°, P < .001). aHKA was similar (P > .05) between pGB and piKA. piKA recreated a more native CPAK distribution, with types I-V being the most common ones, while most pGB knees were of type V, VII, and III. Final iKA and piKA had similar mediolateral balance and laxity, with a root-mean-square error <1.4 mm.

Conclusions

Although balance, laxity, and aHKA were similar between piKA and pGB, piKA better restored native JLO and CPAK phenotypes. The neutral tibial resection moved most pGB knees into types V, VII, and III. Surgeons should appreciate how the alignment strategy affects knee phenotypes.

Restricted kinematic alignment achieves similar relative lateral laxity and greater joint line obliquity compared to gap balancing TKA

PURPOSE

The purpose of this study was to compare ligament balance and laxity profiles achieved throughout flexion in restricted kinematic alignment (rKA) and gap balancing (GB). rKA and GB both aim to improve soft tissue balance and reduce ligament releases in total knee arthroplasty (TKA).

METHODS

One surgeon performed 68 rKA, another performed 73 GB TKAs using the same CR implant and robotic system. rKA limited femoral valgus and tibial varus to 6°, with tibial recuts performed to achieve balance. GB limited tibial varus and femoral valgus to 2°, with femoral resections adjusted to achieve mediolateral balance throughout flexion using predictive-gap planning software. Final joint laxity was measured using a robotic ligament tensioner. Statistical analyses were performed to compare differences in mediolateral balance and joint laxity throughout flexion. Further analyses compared alignment, joint line elevation and orientation (JLO), and frequency of ligament releases and bone recuts.

RESULTS

Both techniques reported greater lateral laxity throughout flexion, with GB reporting improved mediolateral balance from 10° to 45° flexion. GB resected 1.7 mm more distal femur (p ≤ 0.001) and had greater overall laxity than rKA throughout flexion (p ≤ 0.01). rKA increased JLO by 2.5° and 3° on the femur and tibia (p ≤ 0.001). Pre-operative and post-operative coronal alignment were similar across both techniques. rKA had a higher tibial recut rate: 26.5% vs 1.4%, p < 0.001.

CONCLUSIONS

rKA and GB both report lateral laxity but with different JLO and elevation. Use of a predictive-gap GB workflow resulted in greater mediolateral gap symmetry with fewer recuts.

LEVEL OF EVIDENCE

III, retrospective cohort study.

Predictive Gap-balancing Reduces the Extent of Soft-tissue Adjustment Required After Bony Resection in Robot-assisted Total Knee Arthroplasty-A Comparison With Simulated Measured Resection

Background

To understand the extent and frequency of soft-tissue adjustment required to achieve mediolateral (ML) balance in measured resection (MR) vs gap-balancing (GB) total knee arthroplasty, this study compared ML balance and joint laxity throughout flexion between the 2 techniques. The precision of predictive GB in achieving ML balance and laxity was also assessed.

Methods

Two surgeons performed 95 robot-assisted GB total knee arthroplasties with predictive balancing, limiting tibial varus to 3° and adjusting femoral positioning to optimize balance. A robotic ligament tensioner measured joint laxity. Planned MR (pMR) was simulated by applying neutral tibial and femoral coronal resections and 3° of external femoral rotation. ML balance, laxity, component alignment, and resection depths were compared between planned GB (pGB) and pMR. ML balance and laxity were compared between pGB and final GB (fGB).

Results

The proportion of knees with >2 mm of ML imbalance in flexion or extension ranged from 3% to 18% for pGB vs 50% to 53% for pMR (P < .001). Rates of ML imbalance >3 mm ranged from 0% to 9% for pGB and 30% to 38% for MR (P < .001). The mean pMR laxity was 1.9 mm tighter medially and 1.1 mm tighter laterally than pGB throughout flexion. The mean fGB laxity was greater than the mean pGB laxity by 0.5 mm medially and 1.2 mm laterally (P < .001).

Conclusion

MR led to tighter joints than GB, with ML gap imbalances >3 mm in 30% of knees. GB planning improved ML balance throughout flexion but increased femoral posterior rotation variability and bone resection compared to MR. fGB laxity was likely not clinically significantly different than pGB.

The effects of graft size and insertion site location during anterior cruciate ligament reconstruction on intercondylar notch impingement

BACKGROUND

Intercondylar notch impingement is detrimental to the anterior cruciate ligament (ACL). Notchplasty is a preventative remodeling procedure performed on the intercondylar notch during ACL reconstruction (ACLR). This study investigates how ACL graft geometry and both tibial and femoral insertion site location may affect ACL-intercondylar notch interactions post ACLR. A range of ACL graft sizes are reported during ACLR, from six millimeters to 11mm in diameter. Variability of three millimeters in ACL insertion site location is reported during ACLR. This study aims to determine the post-operative effects of minor variations in graft size and insertion location on intercondylar notch impingement.

METHODS

Several 3D finite element knee joint models were constructed using three ACL graft sizes and polar arrays of tibial and femoral insertion locations. Each model was subjected to flexion, tibial external rotation, and valgus motion. Impingement force and contact area between the ACL and intercondylar notch compared well with experimental cadaver data from literature.

RESULTS

A three millimeter anterior-lateral tibial insertion site shift of the maximum size ACL increased impingement force by 242.9%. A three millimeter anterior-proximal femoral insertion site shift of the maximum size ACL increased impingement by 346.2%. Simulated notchplasty of five millimeters eliminated all impingement for the simulation with the greatest impingement. For the kinematics applied, small differences in graft size and insertion site location led to large increases in impingement force and contact area.

CONCLUSIONS

Minor surgical variations may increase ACL impingement. The results indicate that notchplasty reduces impingement during ACLR. Notchplasty may help to improve ACLR success rates.

The effects of knee joint kinematics on anterior cruciate ligament injury and articular cartilage damage

This study determined which knee joint motions lead to anterior cruciate ligament (ACL) rupture with the knee at 25° of flexion. The knee was subjected to internal and external rotations, as well as varus and valgus motions. A failure locus representing the relationship between these motions and ACL rupture was established using finite element simulations. This study also considered possible concomitant injuries to the tibial articular cartilage prior to ACL injury. The posterolateral bundle of the ACL demonstrated higher rupture susceptibility than the anteromedial bundle. The average varus angular displacement required for ACL failure was 46.6% lower compared to the average valgus angular displacement. Femoral external rotation decreased the frontal plane angle required for ACL failure by 27.5% compared to internal rotation. Tibial articular cartilage damage initiated prior to ACL failure in all valgus simulations. The results from this investigation agreed well with other experimental and analytical investigations. This study provides a greater understanding of the various knee joint motion combinations leading to ACL injury and articular cartilage damage.