Orthostatic tremor: a cerebellar pathology?

SEE MUTHURAMAN ET AL DOI101093/AWW164 FOR A SCIENTIFIC COMMENTARY ON THIS ARTICLE: Primary orthostatic tremor is characterized by high frequency tremor affecting the legs and trunk during the standing position. Cerebellar defects were suggested in orthostatic tremor without direct evidence. We aimed to characterize the anatomo-functional defects of the cerebellar motor pathways in orthostatic tremor. We used multimodal neuroimaging to compare 17 patients with orthostatic tremor and 17 age- and gender-matched healthy volunteers. Nine of the patients with orthostatic tremor underwent repetitive transcranial stimulation applied over the cerebellum during five consecutive days. We quantified the duration of standing position and tremor severity through electromyographic recordings. Compared to healthy volunteers, grey matter volume in patients with orthostatic tremor was (i) increased in the cerebellar vermis and correlated positively with the duration of the standing position; and (ii) increased in the supplementary motor area and decreased in the lateral cerebellum, which both correlated with the disease duration. Functional connectivity between the lateral cerebellum and the supplementary motor area was abnormally increased in patients with orthostatic tremor, and correlated positively with tremor severity. After repetitive transcranial stimulation, tremor severity and functional connectivity between the lateral cerebellum and the supplementary motor area were reduced. We provide an explanation for orthostatic tremor pathophysiology, and demonstrate the functional relevance of cerebello-thalamo-cortical connections in tremor related to cerebellar defects.

A randomized, controlled, double-blind, crossover trial of zonisamide in myoclonus-dystonia

OBJECTIVE

To evaluate the efficacy and safety of zonisamide in patients with myoclonus-dystonia.

METHODS

We conducted a randomized, double-blind, placebo-controlled crossover trial of zonisamide (300 mg/d) in 24 patients with myoclonus-dystonia. Each treatment period consisted of a 6-week titration phase followed by a 3-week fixed-dose phase. The periods were separated by a 5-week washout period. The co-primary outcomes were action myoclonus severity (section 4 of the Unified Myoclonus Rating Scale [UMRS 4]) and myoclonus-related functional disability (UMRS 5). Secondary outcomes included dystonia severity, assessed with the movement and disability subscales of the Burke-Fahn-Marsden-Dystonia Rating Scale (BFM), the Clinical Global Impression-Improvement scale (CGI), and safety measures. Wilcoxon signed-rank tests for paired data were used to analyze treatment effects.

RESULTS

Twenty-three patients (11 men, 12 women) were analyzed in the intention-to-treat analysis. Zonisamide significantly improved both action myoclonus (median improvement [95% confidence limits] -5 [-9.25 to -1.44], p = 0.003) and myoclonus-related functional disability (median improvement [95% confidence limits] -2 [-2.58 to -2.46], p = 0.007) compared to placebo. Zonisamide also significantly improved dystonia (BFM movement) compared to placebo (median improvement [95% confidence limits] -3 [-8.46 to 0.03], p = 0.009). No difference was found between zonisamide and placebo with respect to the CGI (median improvement [95% confidence limits] -1 [-1.31 to 0.09], p = 0.1). Zonisamide was well-tolerated.

CONCLUSIONS

Zonisamide is well-tolerated and effective on the motor symptoms of myoclonus-dystonia.

CLASSIFICATION OF EVIDENCE

This study provides Class I evidence that zonisamide improves myoclonus and related disability in patients with myoclonus-dystonia.

Intrinsic signature of essential tremor in the cerebello-frontal network

Essential tremor is a movement disorder characterized by tremor during voluntary movements, mainly affecting the upper limbs. The cerebellum and its connections to the cortex are known to be involved in essential tremor, but no task-free intrinsic signatures of tremor related to structural cerebellar defects have so far been found in the cortical motor network. Here we used voxel-based morphometry, tractography and resting-state functional MRI at 3 T to compare structural and functional features in 19 patients with essential tremor and homogeneous symptoms in the upper limbs, and 19 age- and gender-matched healthy volunteers. Both structural and functional abnormalities were found in the patients' cerebellum and supplementary motor area. Relative to the healthy controls, the essential tremor patients' cerebellum exhibited less grey matter in lobule VIII and less effective connectivity between each cerebellar cortex and the ipsilateral dentate nucleus. The patient's supplementary motor area exhibited (i) more grey matter; (ii) a lower amplitude of low-frequency fluctuation of the blood oxygenation level-dependent signal; (iii) less effective connectivity between each supplementary motor area and the ipsilateral primary motor hand area, and (iv) a higher probability of connection between supplementary motor area fibres and the spinal cord. Structural and functional changes in the supplementary motor area, but not in the cerebellum, correlated with clinical severity. In addition, changes in the cerebellum and supplementary motor area were interrelated, as shown by a correlation between the lower amplitude of low-frequency fluctuation in the supplementary motor area and grey matter loss in the cerebellum. The structural and functional changes observed in the supplementary motor area might thus be a direct consequence of cerebellar defects: the supplementary motor area would attempt to reduce tremor in the motor output by reducing its communication with M1 hand areas and by directly modulating motor output via its corticospinal projections.See Raethjen and Muthuraman (doi:10.1093/brain/awv238) for a scientific commentary on this article.

FXTAS: new insights and the need for revised diagnostic criteria

OBJECTIVE

Fragile X-associated tremor ataxia syndrome (FXTAS) is defined by FMR1 premutation, cerebellar ataxia, intentional tremor, and middle cerebellar peduncle (MCP) hyperintensities. We delineate the clinical, neurophysiologic, and morphologic characteristics of FXTAS.

METHODS

Clinical, morphologic (brain MRI, (123)I-ioflupane SPECT), and neurophysiologic (tremor recording, nerve conduction studies) study in 22 patients with FXTAS, including 4 women.

RESULTS

A total of 43% of patients had no family history of fragile X syndrome (FXS), which contrasts with previous FXTAS series. A total of 86% of patients had tremor and 81% peripheral neuropathy. We identified 3 electroclinical tremor patterns: essential-like (35%), cerebellar (29%), and parkinsonian (12%). Two electrophysiologic patterns evocative of non-length-dependent (56%) and length-dependent sensory neuropathy (25%) were identified. Corpus callosum splenium (CCS) hyperintensity was as frequent (68%) as MCP hyperintensities (64%). Sixty percent of patients had parkinsonism and 47% abnormal (123)I-ioflupane SPECT. Unified Parkinson's Disease Rating Scale motor score was correlated to abnormal (123)I-ioflupane SPECT (p = 0.02) and to CGG repeat number (p = 0.0004). Scale for the assessment and rating of ataxia correlated with dentate nuclei hyperintensities (p = 0.03) and CCS hyperintensity was a marker of severe disease progression (p = 0.04).

CONCLUSIONS

We recommend to include in the FXTAS testing guidelines both CCS hyperintensity and peripheral neuropathy and to consider them as new major radiologic and minor clinical criterion, respectively, for the diagnosis of FXTAS. FXTAS should also be considered in women or when tremor, MCP hyperintensities, or family history of FXS are lacking. Our study broadens the spectrum of tremor, peripheral neuropathy, and MRI abnormalities in FXTAS, hence revealing the need for revised criteria.

Analysis of sixty-two explanted Liotta bioprostheses: biocompatibility, biofunctionality, and biodurability issues

Sixty-two explanted Liotta porcine bioprostheses were examined to review the issues related to their biocompatibility, biofunctionality, and biodurability. These bioprostheses were harvested from 56 patients with implantation times ranging from only a few hours to more than nine years of implantation. There were 10 acute and short-term (< 1 year), 20 midterm (1 < t < 5 years), and 32 long-term (> 5 years) cases. The indications for the reoperations were: hemodynamic (59), thrombosis (10), and endocarditis (3). The major indications varied according to the duration of implantation: blood infiltration, fibrin buildup, thrombosis in the short-term; endocarditis and hemodynamic insufficiency in the midterm; and mineralization and tears causing hemodynamic incompetence in the long term. Mineralization proved to be the main threat to long-term durability for porcine valves. Besides a few short-term failures, these explanted devices slowly degenerated over time and were replaced to prevent congestive heart failure. Documentation of the failure modes of these porcine valves is important since the demand for bioprostheses will increase in the future, in particular for percutaneous devices. Such bioprostheses emphasize a critical biocompatibility issue following implantation because they have the capacity to remain free of thrombus in the absence of anticoagulation. The biofunctionality appears to be adequate in the absence of subsequent pathology with restoration of normal valve function. However, the documentation of such significant long-term biodurability issues raises questions that have been addressed but not fully answered yet with the new generations of bioprostheses.

Can Magnetic Resonance Imaging Be the Key Technique to Visualize and Investigate Endovascular Biomaterials?

OBJECTIVE

Magnetic resonance imaging (MRI) is an established modality in clinical use but may be potentially underutilized to visualize and investigate biomaterials. As its use is totally contraindicated only for ferromagnetic devices, it was employed to visualize deployment, biofonctionality, healing, and biodurability of a commercially available endovascular device, namely the Medtronic-AVE AneuRx. The quality of the observations coupled with the absence of ionizing radiations are likely to make this technique an attractive imaging modality in the future.

METHOD

The potential benefits of the MRI technique were investigated in a GE Vectra-MR 0.5T MRI for the Medtronic-AVE AneuRx endovascular prosthesis, under different conditions: undeployed i.e., inserted in the delivery cartridge as received from the manufacturer (step 1), deployed in a mock glass-aneurysm tube (step 2), and as a pathological explant harvested at the autopsy of a patient (step 3). The device was submitted to X-rays for examination in addition to MRI. At step 3, the device was further investigated with light microscopy and scanning electron microscopy (SEM) together with X-ray diffraction.

RESULTS

The device which was inserted and pleated in the delivery cartridge did not demonstrate any significant observation either in MRI or in X-rays. When it was deployed in the mock aneurysmal glass tube, light artefacts were associated with the T2 weighed FSE images around the Nitinol whereas X-rays gave images of indisputable interest. Similar results were noted using the explanted device. Very high contrasts were obtained with T1 whereas T2 images were almost defect free. The X-rays allowed to accurate imaging of the Nitinol skeleton but were poor to discriminate between the different tissues. Pathology observations using light microscopy were not really challenged, as the magnetic resonance imaging was performed using a 0.5T machine.

DISCUSSION

The benefits of magnetic resonance imaging as a quality control technique to examine an endovascular device within its cartridge remains ill defined. Similarly, the role of conventional X-rays is unknown. The observation of devices fully deployed in a mock aneurysmal glass-tube under MRI are potentially useful but X-rays images allowed better definition. The MRI examination of the explanted device does permit observations related to the healing of the device that might be obtained in vivo and, thus offers new avenues for the follow-up of implanted devices. The pathological investigations brought additional informations about the tissues and the corrosion of the Nitinol. However, it is unlikely that MRI will permit detailed analysis of the biomaterials and in particular the corrosion process of the stents.

CONCLUSION

These early observations of the follow-up of devices using MRI warrant further investigation. The absence of ionizing radiation with MRI makes this technique particularly attractive. As there is no emission of ionizing radiation associated with magnetic resonance, it is recommended that further investigation using this environment friendly technique for the follow-up of devices made of biomaterials that are MRI compatible.

Characterization of an endovascular prosthesis using the 3Bs rule (biocompatibility, biofunctionality and biodurability): a recommended protocol to investigate a device harvested at necropsy

Numerous endovascular stent grafts to treat intrarenal aortic aneurysms are now commercially available, and many new concepts are currently in development worldwide. In order to objectively quantify their outcomes, we propose a detailed protocol to examine a reference device that was harvested from a patient who died a few hours after endovascular stent-graft deployment for an abdominal aortic aneurysm according to the 3Bs rule (biocompatibility, biofunctionality, and biodurability). Relevant patient history of this 63-year-old man included radiotherapy treatment for lung cancer. Following the patient's death, the device was harvested en bloc together with the aneurysmal sac. The analysis of the device was conducted using nondestructive testing (X-rays, CT scan, magnetic resonance imaging [MRI], and endoscopy) and destructive testing (dissection, histology, and fabric and wire component analyses). Results from the gross examination demonstrated that the outer layer of the aneurysm sac was white, stiff, and continuous without any disruption. The Xray analysis, CT scan, and MRI confirmed that the device together with its modular segments was properly deployed at implantation. Endoscopy showed that the device was deployed securely immediately distal to the renal arteries. As anticipated, thin scattered mural thrombi at the blood/foreign material interface were observed on the blood tight flow surface. There were no tears in the fabric, and the dimensions and textile structure were well preserved. The metallic wires were intact. This fatality had no association with the stent graft as the patient's death was caused by the rupture of the pulmonary artery following intensive radiotherapy. In conclusion, autopsy, nondestructive testing, and destructive testing are therefore the necessary steps to validate any explanted endovascular stent graft in terms of biocompatibility, biofunctionality, and biodurability. In this specific case, the endovascular device fulfills the 3Bs rule. The authors recommend this protocol to investigate explanted endovascular devices.

Myoclonus or tremor in orthostatism: an under-recognized cause of unsteadiness in Parkinson's disease

Patients with Parkinson's disease (PD) often complain of unsteadiness. This can occur as the result of various neurological dysfunctions, including changes in postural adjustments, loss of postural reflexes, axial akinesia and rigidity, freezing and/or postural hypotension. In some cases these symptoms remain unexplained, and rare cases of unsteadiness have been attributed to tremor on standing. To delineate this condition, we investigated 11 consecutive PD patients with unexplained unsteadiness because of tremor on standing, seen in our department over a 6-year period. All the patients had detailed clinical and electrophysiological investigations based on surface polygraphic electromyographic recordings. Four patients had fast orthostatic tremor (13-18 Hz), one had intermediate orthostatic tremor (8-9 Hz), and three had slow orthostatic tremor (4-6 Hz). The remaining 3 patients had orthostatic myoclonus, a condition that has not previously been reported in PD. Patients with fast tremor improved on clonazepam. Patients with slow tremor and myoclonus improved on levodopa and sometimes benefited further when clonazepam was added. These observations show the usefulness of neurophysiological investigations for diagnosing and treating unexplained unsteadiness in Parkinson's disease.

Newly developed hybrid suture without lubricant: noninvasive in vivo assessment of biocompatibility with multiparametric MR imaging

Magnetic resonance imaging (MRI) and magnetic resonance (MR) relaxometry were used to assess noninvasively the tissue response of a new uncoated hybrid braided suture made from a combination of ultra-high-molecular-weight polyethylene (UHMWPE) and polyester (polyethylene terephthalate) (PET) yarns in comparison to a silicone impregnated braided 100% polyester (PET) control suture (Ticron). Both biomaterials were monitored for a period of 30 days following implantation in both incised and nonincised paravertebral rabbit muscles. In all cases, MR images and relaxometry demonstrated that the hybrid suture elicited either a milder or a similar tissue and cellular response compared to the control suture. These findings were confirmed by conventional histological analysis of the surrounding tissues. They also demonstrated that the hybrid suture promoted faster healing in terms of collagen infiltration between the yarns and individual filaments. This milder inflammatory reaction and improved biocompatibility represent a real advantage in the healing performance of sutures for cardiac and vascular surgery, and support the need for continued research and development of hybrid structures. This study also demonstrated the ability of MRI techniques to noninvasively evaluate the biocompatibility of biomaterials. By extending the capacity of MR diagnostic tools from patients to experimental animals, it is now possible to validate the healing performance of foreign materials with statistical reliability and fewer animals.

Polymethylmethacrylate (PMMA) as an embedding medium preserving tissues and foreign materials encroaching in endovascular devices

Problems of displacement, poor healing, degradation of the polymers and corrosion of the metallic frame in endovascular devices still require in-depth investigations. As the tissues and the foreign materials are in close contact, it is of paramount importance to efficiently investigate the interfaces between them. Inclusion in polymethymethacrylate (PMMA) permits us to obtain thin slides and preserve the capacity to perform the appropriate stainings. An AneuRx prosthesis was harvested in bloc with the surrounding tissues at the autopsy of a patient 25 months post deployment in a 5.7 cm diameter AAA and sectioned in the direction of the blood flow in two halves. A cross-section of the encapsulated distal segment together with the surrounding aneuryshmal sac was embedded in polymethylmethacrylate (PMMA). Further to complete polymerization, slices of the specimen were cut on a precision banding saw under coolant. They were affixed onto methacrylate slides with a UV cured adhesive. Binding and polishing were done on a numeric grinder and slices 25 to 30 microm in thickness were stained with toluidine blue prior to observation in light microscopy. Additional slices were prepared for scanning electron microscopy and X-ray energy dispersive spectrometry for determination of the elemental composition of the Nitinol stent. The aortic wall did not demonstrate complete integrity along with its circumference. Some areas of rupture were noted. The content of the sac was heavily shrunk and was mostly acellular. The walls of the device were very well encapsulated. The PMMA embedding permitted the polyester wall, the Nitinol wire and the collagen to keep in close contact. Scanning electron microscopy involved backscattered electrons and confirmed the corrosion the Nitinol wire at the boundary with living tissues. Based upon the results obtained, we believe that PMMA embedding is the most appropriate method to process endovascular devices for histological and material investigation. Needless to say, that paraffin embedding would have not been feasible for such a big size specimen involving different materials.

MRI virtual biopsies: analysis of an explanted endovascular device and perspectives for the future

Information that can be obtained by magnetic resonance imaging (MRI) of explanted endovascular devices must be validated as this method is non-destructive. Histology of such a device together with its encroached tissues can be elegantly performed after polymethymethacrylate (PMMA) embedding, but this approach requires destruction of the specimen. The issue is therefore to determine if the MRI is sufficient to fully validate an explanted device based upon the characterization of an explanted specimen. An AneuRx device deployed percutaneously 25 months earlier in a 75-year-old patient was removed en bloc at autopsy together with the surrounding aneurysmal sac and segments of the upstream and downstream arteries. Macroscopic pictures were taken and a slice of the cross-section was processed for histology after polymethylmethacrylate (PMMA) embedding. For the magnetic resonance imaging investigation, the device was inserted in a Biospec 4.7 T MRI system with a 20 mm diameter birdcage resonator used for both emission and reception. A Spin-Echo (SE) was used to acquire both T1 proton density (PD) and T2 weighted images. A gradient-echo (GE) sampling of a free induction decay (GESFID) was used to generate multiple GE images using a single excitation pulse so that four images at different TE were obtained in the same acquisition. The selected explanted device was outstandingly well-healed compared to most devices harvested from humans. No inflammatory process was observed in contact or at distance of the materials. In MRI T1 images display no specific contrast and were homogeneous in the different tissues. The contrast was improved on proton density weighed images. On the T2 weighed images, the different areas were well identified. The diffusion images displayed in the surrounding B region had the greatest diffusion coefficient and the greatest anisotropy. The MRI analysis of the explanted AneuRx device illustrates the possibilities of this technique to characterize the interaction of the endovascular graft with the surrounding tissues. MRI is a breakthrough to investigate explanted medical devices but it also can be advantageously used in vivo to obtain virtual biopsies, because real biopsies to determine the 3 Bs (biocompatibility, biofunctionality and bioresilience) cannot be carried out as they could obviously initiate infection and degradation of the foreign materials.

The adhesive properties of endothelial cells on endovascular stent coated by substrates of poly-l-lysine and fibronectin

Optimizing endothelial cell growth and adhesion on the surface of metallic stents implanted in the vascular system is a fundamental issue in understanding and improving their long-term biocompatibility. The ability of the endothelial cell to attach and adhere to the luminal stent surface as well as the capacity to withstand the significant shear stress associated with blood flow are important determinants. The adhesive characteristics of human umbilical vein endothelial cellsectin (HUVEC) on stent surfaces coated with either Poly-L-Lysine (PLL) or fibron (FN) were compared with uncoated controls. Increasing concentrations of PLL and FN were measured using a micropipette aspiration system. The adhesivenamic properties of HUVECs under static flow conditions were compared to a dy environment on endovascular stents using a parallel-plate-flow chamber. A scanning electron microscope picture was used to measure the number and the adhesive cell ratio as well as the percentage of surface coverage of stent by endothelial cells. The adhesive forces of HUVECs on foreign surfaces coated with PLL and FN were higher compared to uncoated surfaces, and were dependent on incr ing concentrations. These coatings resulted in significant increase of the adhesive force of HUVECs. The influence of substrates on the adhesion of the endothelial cell monolayer under static or dynamic flow conditions was highly significant compared with controls (p<0.01). No significant differences were observed between PLL and FN substrates. Both PLL and FN coated surfaces can significantly increase the adhesion and growth of HUVECs on metallic stent surfaces.

Biocompatibility Studies of the Anaconda Stent-Graft and Observations of Nitinol Corrosion Resistance

PURPOSE

To validate the deployment, in vivo performance, biostability, and healing capacity of the Anaconda self-expanding endoprosthesis in a canine aortic aneurysm model.

METHODS

Aneurysms were surgically created in 12 dogs by sewing a woven polyester patch onto the anterior side of the thoracic or abdominal aorta. Anaconda prostheses were implanted transfemorally for prescheduled periods (1 or 3 months). Aneurysm exclusion and stent-graft patency were monitored angiographically. Healing was assessed with histological analysis and scanning electron microscopy (SEM). Textile analysis determined the physical and chemical stability of the woven polyester material, while the biostability of the nitinol wires was evaluated with SEM and spectroscopy.

RESULTS

All prostheses were intact at explantation. After 1 month, endothelial-like cells were migrating in a discontinuous manner both proximally and distally over the internal collagenous pannus at the device-host boundary. After 3 months, endothelialization had reached the midsections of the devices, with a thicker collagenous internal capsule. Patches of endothelial-like cells were sharing the luminal surface with thrombotic deposits. However, the wall of the device at the level of the aneurysm was generally poorly healed, with multiple thrombi scattered irregularly over the luminal surface. The polyester fabric was intact except for some filaments that were ruptured adjacent to the sutures and some abrasion caused by the nitinol wires. No evidence of corrosion was found on the nitinol stents.

CONCLUSIONS

This Anaconda stent-graft has demonstrated its ability to exclude arterial aneurysms. The device used in this study was an experimental prototype, and the manufacturer has incorporated new immobilization features into the model for clinical use. The constituent materials appear to be suitable in terms of biocompatibility, biofunctionality, and short-term durability.

Solid-state 1H and 27Al NMR studies of amorphous aluminum hydroxides

Two kinds of amorphous aluminum hydroxides, a sample precipitated from admixing AlCl3 and NaOH aqueous solutions and the commercial product, were measured by 27Al and 1H solid-state NMR spectroscopy. Pentahedral and tetrahedral coordinations, as well as octahedral coordination of oxygen atoms for aluminum, are observed in 27Al magic angle spinning (MAS) spectra of both amorphous samples. In contrast, octahedral coordination is only observed in gibbsite, bayerite, and boehmite. According to 1H MAS-NMR spectra under conditions of high spinning rate (35 kHz) and high field (14.09 T), free waters and OH groups coupled with aluminum for amorphous samples are observed at approximately 5 and approximately 4.5 ppm, respectively, the latter peak being broader. This is consistent with the differential spectra between spin echo and transfer of populations in double resonance. We conclude that the subunits of AlO4, AlO5, and AlO6 in amorphous aluminum hydroxides are bound through hydrogen bonds with a wide distribution of bonding strength.

Nuclear magnetic resonance spectroscopy of bone substitutes

Calcium phosphate bone replacement biomaterials are widely used in different applications. Structure, composition, and organization are, before implantation, analyzed with different methods. Among them, X-ray diffraction is a recognized test. As bioresorption produces more amorphous material, the process is observed and quantified via scanning electron microscopy. Comparatively high-resolution 31P solid-state nuclear magnetic resonance spectroscopy is able to analyze raw ceramics composition and to estimate osteoformation.

A New Straightforward Approach to Generate Si-H Groups on Silica

In this paper it is demonstrated unequivocally by solid-state nuclear magnetic resonance and diffuse reflectance infrared Fourier transform spectroscopies that, at high temperature, hydrogen reacts directly with pyrogenic silica to form stable hydride Si-H groups. Such modified silicas should exhibit specific properties far from those of silicas having only surface silanol groups. The interest for hydride-modified silicas arises from the possibility of using their Si-H groups as reducing agents or as active sites for the synthesis of new chromatographic phases. Copyright 1999 Academic Press.

Molecular Conformation and Mobility of Polyamines Adsorbed on Silica Studied by Spin Labeling

Poly(ethyleneimine) and poly(4-vinylpyridine) chains adsorbed on Nucleosil silica have been randomly labeled with nitroxide free radicals. The EPR signal is very sensitive to the molecular Brownian motion of the segments and shows generally at least two different environments: trains adsorbed on the surface with a restricted mobility, and loops and tails protruding into the solution with a fast motion. The rotational correlation times and the relative fraction of each population are given as functions of the coverage achieved and of the specific surface area of the silica for the samples in contact with methanol and sometimes water. The overall picture is consistent with a diffuse layer for the PEI and a more compact one with some heterogeneities for the P4VP. Copyright 1999 Academic Press.

Water Adsorption on Pyrogenic Silica Followed by 1H MAS NMR

On the surface of two commercial pyrogenic silicas (Degussa and Cabot), five resonances were identified on the basis of the chemical shift, homonuclear coupling (T2), and spin-lattice relaxation behavior (T1). In accordance with previous studies we observed three different types of silanol groups: (i) weakly coupled (long T2), water inaccessible, isolated "internal" silanols at 1.8 ppm; (ii) weakly coupled, external "free" silanols revealed upon dehydration at 2.5 ppm; and (iii) strongly coupled external hydrogen bound silanols with an unresolved broad resonance between 3 and 7 ppm. The resonance of water, whose position between 2.6 and 4.6 ppm depended on water content, corresponded to two unresolved species of slightly different T1. By equating this resonance to the weighted average of two distinct populations of water, we were able to distinguish the first layer of strongly hydrogen bound water at 2.7 ppm from liquid-like water at 5 ppm. The first layer is complete for water relative humidity as low as 3.6% and corresponds to a surface coverage of 4.75 H2O/nm2. If we assumed a cristobalite-based surface structure, this meant a 1:1 ratio between surface hydroxyls and the first layer of physisorbed water. This ratio was the same for the two silicas regardless of surface area. Copyright 1997 Academic Press. Copyright 1997Academic Press

High-resolution 29Si solid-state NMR study of silicon functionality distribution on the surface of silicas

29Si solid-state NMR allows us to distinguish silicon atoms involved in siloxane bridges (Q4), single silanol (Q3) and geminal silanol groups (Q2) on the surface of silica. The relative proportions of each species can be obtained by Magic Angle Spinning (MAS) associated with 1H-->29Si crosspolarization (CP/MAS). This preliminary study deals with the silicon functionality of MCM-41, a purely siliceous, amorphous and mesoporous silica. From the 29Si spectra the relative proportions are estimated to be 3.7% Q2 27.3% Q3 and 69.0% Q4, while the ratio Q2/Q2 + Q3) is 0.12. These results are found to be in perfect agreement with a binomial probability distribution of sites.

Hydroxyl groups in bone mineral

The question of whether the apatite crystals of bone contain hydroxyl groups was explored using magic angle spinning, proton nuclear magnetic resonance spectroscopy, and resolution enhanced Fourier transform infrared spectroscopy. The powdered bone samples were heated at 300 degrees C in air, in CO2 at 4 bar atmosphere, and at 300 degrees C in air and subsequently at 300 degrees C in CO2, to eliminate the effects of water tightly bound to the crystals and to prevent the degradation of carbonate groups and the elimination of potentially present OH groups. Results confirm earlier findings that bone apatite crystals do not contain detectable amounts of hydroxyl ions.

Solid-state 31P NMR spectroscopy of bone and bone substitutes

Using magic angle sample spinning 31P NMR spectroscopy, we studied NMR parameters of hydroxyapatite, calcium-deficient hydroxyapatite, and beta-tricalcium phosphate. These data were compared to rabbit bone parameters. Rabbit bone spectrum is similar to deficient hydroxyapatite spectrum but high-power proton decoupling did not modify its linewidth. Moreover, both bone T1 and deficient hydroxyapatite T1 were much longer than pure hydroxyapatite T1 and beta-tricalcium phosphate T1. We used these results to develop quantitative analysis of newly deposited bone inside beta-tricalcium phosphate implants in rabbit. This method made it possible to demonstrate the effect of porosity on osteoinduction of biomaterials.