Nanosecond time-dependent Stokes shift at the tunnel mouth of haloalkane dehalogenases

The tunnel mouths are evolutionally the most variable regions in the structures of haloalkane dehalogenases originating from different bacterial species, suggesting their importance for adaptation of enzymes to various substrates. We decided to monitor the dynamics of this particular region by means of time-resolved fluorescence spectroscopy and molecular dynamic simulations. To label the enzyme specifically, we adapted a novel procedure that utilizes a coumarin dye containing a halide-hydrocarbon linker, which serves as a substrate for enzymatic reaction. The procedure leads to a coumarin dye covalently attached and specifically located in the tunnel mouth of the enzyme. In this manner, we stained two haloalkane dehalogenase mutants, DbjA-H280F and DhaA-H272F. The measurements of time-resolved fluorescence anisotropy, acrylamide quenching, and time-resolved emission spectra reveal differences in the polarity, accessibility and mobility of the dye and its microenvironment for both of the mutants. The obtained experimental data are consistent with the results obtained by molecular dynamics calculations and correlate with the anatomy of the tunnel mouths, which were proposed to have a strong impact on the catalytic activity and specificity of the examined mutants. Interestingly, the kinetics of the recorded time-dependent Stokes shift is unusual slow; it occurs on the nanosecond time-scale, suggesting that the protein dynamics is extremely slowed down at the region involved in the exchange of ligands between the active-site cavity and bulk solvent.

The identification of catalytic pentad in the haloalkane dehalogenase DhmA from Mycobacterium avium N85: Reaction mechanism and molecular evolution

Haloalkane dehalogenase DhmA from Mycobacterium avium N85 showed poor expression and low stability when produced in Escherichia coli. Here, we present expression DhmA in newly constructed pK4RP rhodococcal expression system in a soluble and stable form. Site-directed mutagenesis was used for the identification of a catalytic pentad, which makes up the reaction machinery of all currently known haloalkane dehalogenases. The putative catalytic triad Asp123, His279, Asp250 and the first halide-stabilizing residue Trp124 were deduced from sequence comparisons. The second stabilizing residue Trp164 was predicted from a homology model. Five point mutants in the catalytic pentad were constructed, tested for activity and were found inactive. A two-step reaction mechanism was proposed for DhmA. Evolution of different types of catalytic pentads and molecular adaptation towards the synthetic substrate 1,2-dichloroethane within the protein family is discussed.

Cloning, biochemical properties, and distribution of mycobacterial haloalkane dehalogenases

Haloalkane dehalogenases are enzymes that catalyze the cleavage of the carbon-halogen bond by a hydrolytic mechanism. Genomes of Mycobacterium tuberculosis and M. bovis contain at least two open reading frames coding for the polypeptides showing a high sequence similarity with biochemically characterized haloalkane dehalogenases. We describe here the cloning of the haloalkane dehalogenase genes dmbA and dmbB from M. bovis 5033/66 and demonstrate the dehalogenase activity of their translation products. Both of these genes are widely distributed among species of the M. tuberculosis complex, including M. bovis, M. bovis BCG, M. africanum, M. caprae, M. microti, and M. pinnipedii, as shown by the PCR screening of 48 isolates from various hosts. DmbA and DmbB proteins were heterologously expressed in Escherichia coli and purified to homogeneity. The DmbB protein had to be expressed in a fusion with thioredoxin to obtain a soluble protein sample. The temperature optimum of DmbA and DmbB proteins determined with 1,2-dibromoethane is 45 degrees C. The melting temperature assessed by circular dichroism spectroscopy of DmbA is 47 degrees C and DmbB is 57 degrees C. The pH optimum of DmbA depends on composition of a buffer with maximal activity at 9.0. DmbB had a single pH optimum at pH 6.5. Mycobacteria are currently the only genus known to carry more than one haloalkane dehalogenase gene, although putative haloalkane dehalogenases can be inferred in more then 20 different bacterial species by comparative genomics. The evolution and distribution of haloalkane dehalogenases among mycobacteria is discussed.

Modification of activity and specificity of haloalkane dehalogenase from Sphingomonas paucimobilis UT26 by engineering of its entrance tunnel

Structural comparison of three different haloalkane dehalogenases suggested that substrate specificity of these bacterial enzymes could be significantly influenced by the size and shape of their entrance tunnels. The surface residue leucine 177 positioned at the tunnel opening of the haloalkane dehalogenase from Sphingomonas paucimobilis UT26 was selected for modification based on structural and phylogenetic analysis; the residue partially blocks the entrance tunnel, and it is the most variable pocket residue in haloalkane dehalogenase-like proteins with nine substitutions in 14 proteins. Mutant genes coding for proteins carrying all possible substitutions in position 177 were constructed by site-directed mutagenesis and heterologously expressed in Escherichia coli. In total, 15 active protein variants were obtained, suggesting a relatively high tolerance of the site for the introduction of mutations. Purified protein variants were kinetically characterized by determination of specific activities with 12 halogenated substrates and steady-state kinetic parameters with two substrates. The effect of mutation on the enzyme activities varied dramatically with the structure of the substrates, suggesting that extrapolation of one substrate to another may be misleading and that a systematic characterization of the protein variants with a number of substrates is essential. Multivariate analysis of activity data revealed that catalytic activity of mutant enzymes generally increased with the introduction of small and nonpolar amino acid in position 177. This result is consistent with the phylogenetic analysis showing that glycine and alanine are the most commonly occurring amino acids in this position among haloalkane dehalogenases. The study demonstrates the advantages of using rational engineering to develop enzymes with modified catalytic properties and substrate specificities. The strategy of using site-directed mutagenesis to modify a specific entrance tunnel residue identified by structural and phylogenetic analyses, rather than combinatorial screening, generated a high percentage of viable mutants.

Cloning and expression of the haloalkane dehalogenase gene dhmA from Mycobacterium avium N85 and preliminary characterization of DhmA

Haloalkane dehalogenases are microbial enzymes that catalyze cleavage of the carbon-halogen bond by a hydrolytic mechanism. Until recently, these enzymes have been isolated only from bacteria living in contaminated environments. In this report we describe cloning of the dehalogenase gene dhmA from Mycobacterium avium subsp. avium N85 isolated from swine mesenteric lymph nodes. The dhmA gene has a G+C content of 68.21% and codes for a polypeptide that is 301 amino acids long and has a calculated molecular mass of 34.7 kDa. The molecular masses of DhmA determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by gel permeation chromatography are 34.0 and 35.4 kDa, respectively. Many residues essential for the dehalogenation reaction are conserved in DhmA; the putative catalytic triad consists of Asp123, His279, and Asp250, and the putative oxyanion hole consists of Glu55 and Trp124. Trp124 should be involved in substrate binding and product (halide) stabilization, while the second halide-stabilizing residue cannot be identified from a comparison of the DhmA sequence with the sequences of three dehalogenases with known tertiary structures. The haloalkane dehalogenase DhmA shows broad substrate specificity and good activity with the priority pollutant 1,2-dichloroethane. DhmA is significantly less stable than other currently known haloalkane dehalogenases. This study confirms that a hydrolytic dehalogenase is present in the facultative pathogen M. avium. The presence of dehalogenase-like genes in the genomes of other mycobacteria, including the obligate pathogens Mycobacterium tuberculosis and Mycobacterium bovis, as well as in other bacterial species, including Mesorhizobium loti, Xylella fastidiosa, Photobacterium profundum, and Caulobacter crescentus, led us to speculate that haloalkane dehalogenases have some other function besides catalysis of hydrolytic dehalogenation of halogenated substances.

Structure-specificity relationships for haloalkane dehalogenases

A structural analysis of the substrate specificity of hydrolytic dehalogenases originating from three different bacterial isolates has been performed using the multiple computer-automated structure evaluation methodology. This methodology identifies structural fragments in substrate molecules that either activate or deactivate biological processes. The analysis presented in this contribution is based on newly measured dehalogenation data combined with data from the literature (91 substrates). The enzymes under study represent different specificity classes of haloalkane dehalogenases (haloalkane dehalogenase from Xanthobacter autotrophicus GJ10, Rhodococcus erythropolis Y2, and Sphingomonas paucimobilis UT26). Three sets of structural rules have been identified to explain their substrate specificity and to predict activity for untested substrates. Predictions of activity and inactivity based on the structural rules from this analysis were provided for those compounds that were not yet tested experimentally. Predictions were also made for the compounds with available experimental data not used for the model construction (i.e., the external validation set). Correct predictions were obtained for 28 of 30 compounds in the validation set. Incorrect predictions were noted for two substrates outside the chemical domain of the set of compounds for which the structural rules were generated. A mechanistic interpretation of the structural rules generated provided a fundamental understanding of the structure-specificity relationships for the family of haloalkane dehalogenases.

Dehalogenation of haloalkanes by Mycobacterium tuberculosis H37Rv and other mycobacteria

Haloalkane dehalogenases convert haloalkanes to their corresponding alcohols by a hydrolytic mechanism. To date, various haloalkane dehalogenases have been isolated from bacteria colonizing environments that are contaminated with halogenated compounds. A search of current databases with the sequences of these known haloalkane dehalogenases revealed the presence of three different genes encoding putative haloalkane dehalogenases in the genome of the human parasite Mycobacterium tuberculosis H37Rv. The ability of M. tuberculosis and several other mycobacterial strains to dehalogenate haloaliphatic compounds was therefore studied. Intact cells of M. tuberculosis H37Rv were found to dehalogenate 1-chlorobutane, 1-chlorodecane, 1-bromobutane, and 1,2-dibromoethane. Nine isolates of mycobacteria from clinical material and four strains from a collection of microorganisms were found to be capable of dehalogenating 1,2-dibromoethane. Crude extracts prepared from two of these strains, Mycobacterium avium MU1 and Mycobacterium smegmatis CCM 4622, showed broad substrate specificity toward a number of halogenated substrates. Dehalogenase activity in the absence of oxygen and the identification of primary alcohols as the products of the reaction suggest a hydrolytic dehalogenation mechanism. The presence of dehalogenases in bacterial isolates from clinical material, including the species colonizing both animal tissues and free environment, indicates a possible role of parasitic microorganisms in the distribution of degradation genes in the environment.

Effect of the carbon source on assessment of degrading bacteria with the spread-plating technique during in situ bioremediation

Spread-plating belongs to traditional microbiological methods employed for quantification of subsurface microflora during bioremediation projects in the Czechia. Concentration of degrading organisms is estimated from the number of colonies grown on agar plates supplied with contaminant as the sole carbon source. The data obtained during in situ bioremediation of the Dacice site contaminated by cutting oil suggests that changes in the composition of the carbon source in the subsurface may cause a discrepancy between laboratory data and situation in subsurface.