Influence of the design of 3D-printed indirect bonding trays and experience of the clinician on the accuracy of bracket placement

PURPOSE

The aim was to investigate the influence of three different three-dimensional (3D)-printed bonding tray designs and professional experience on accuracy of indirect bracket placement.

METHODS

Virtual bracket placement was performed on a scanned dental model using OnyxCeph software (Image Instruments, Chemnitz, Germany). Three different designs for indirect bonding trays (open, semi-open, and closed design) were created and produced using a 3D printer. To analyze the influence of professional experience, one of the three tray designs was produced twice. In this case, bracket placement was performed by an inexperienced dentist. Bracket positions were scanned after the indirect bonding procedure. Linear and angular transfer errors were measured. Significant differences between the target and actual situation were analyzed using the Kruskal-Wallis and χ2 test.

RESULTS

All bonding tray designs resulted in comparable results. The results of the unexperienced dentist showed significantly higher deviations than those for the experienced orthodontist in the torque direction. However, the mean values were comparable. The open tray design exceeded the clinically acceptable limits of 0.25 mm and 1° more often. The inexperienced dentist exceeded these limits significantly more often than the experienced orthodontist in the vertical and torque direction. The immediate bracket loss rate showed no significant differences between the different tray designs. Significantly more bracket losses were observed for the inexperienced dentist during the procedure compared to the experienced orthodontist.

CONCLUSIONS

The bonding tray design and professional experience had an influence on the exceedance of clinically relevant limits of positioning accuracy and on the bracket loss rate.

Retrospective clinical study on the performance and aesthetic outcome of pressed lithium disilicate restorations in posterior teeth up to 8.3 years

OBJECTIVES

Evaluation of cumulative survival and complication rate of monolithic lithium disilicate inlays and partial crowns performed by supervised undergraduate students up to 8.3 years of clinical service.

MATERIALS AND METHODS

In this retrospective clinical study 143 lithium disilicate posterior restorations (IPS e.max Press) were examined according to the FDI criteria. A standardised questionnaire was used to determine patient satisfaction. The aesthetic outcome was evaluated by dentists and dental technicians using intraoral photographs. Data were descriptively analysed. Cumulative survival and success rates were calculated using Kaplan-Meier estimation.

RESULTS

The cumulative survival rate of lithium disilicate restorations was 97.5% after a mean service time of 5.9 years and 95.0% after 8.3 years. The cumulative success rate decreased from 94.4% after 5.9 years to 30.7% after 8.3 years. Repairs were required for 7 restorations (4.9%), and 5 (3.5%) were classified as failures. The results of the questionnaire indicate a high level of patient satisfaction. The subjective aesthetics were assessed more critically by dental technicians compared to dentists.

CONCLUSION

Lithium disilicate posterior restorations survived successfully up to 8.3 years when carried out by undergraduate students.

CLINICAL RELEVANCE

Pressed lithium disilicate glass ceramic inlays and partial crowns are reliable treatment options in posterior teeth.

Cytotoxicity of 3D printed resin materials for temporary restorations on human periodontal ligament (PDL-hTERT) cells

OBJECTIVES

Various dental resin materials are available for the fabrication of temporary restorations using modern additive printing methods. Albeit these materials are placed for several months in intimate contact with dental hard and soft tissues, including the gingival crevice, there exists only insufficient evidence on the biocompatibility of these materials. This in vitro study aimed to delineate the biocompatibility of 3D printable materials on periodontal ligament cells (PDL-hTERTs).

METHODS

Samples of four dental resin materials for additive fabrication of temporary restorations using 3D printing (MFH, Nextdent; GC Temp, GC; Freeprint temp, Detax; 3Delta temp, Deltamed), one material for subtractive fabrication (Grandio disc, Voco) and one conventional temporary material (Luxatemp, DMG) were prepared with a standardized size according to the manufacturer's instructions. Human PDL-hTERTs were exposed to resin specimens or eluates of the material for 1, 2, 3, 6 and 9 days. For determination of cell viability, XTT assays were performed. In addition, the expression of the proinflammatory cytokines interleukin 6 and 8 (IL-6 and 8) was assessed in the supernatants with ELISA. Cell viability and the expression of IL-6 and 8 in presence of the resin material or their eluates was compared with untreated controls. Immunofluorescence staining for IL-6 and IL-8, as well as scanning electron microscopy of the discs after culturing, were performed. Differences between groups were analyzed with Student´s t-test for unpaired samples.

RESULTS

Compared to untreated control samples, the exposure against the resin specimen induced strong reduction of cell viability in case of the conventional material Luxatemp (p < 0.001) and the additive material 3Delta temp (p < 0.001) irrespective of the observation period. On the contrary, the presence of eluates of the various materials induced only minor changes in cell viability. Considering IL-6 (day 2: p = 0.001; day 6 and 9: p < 0.001) and IL-8 (day 1: p = 0.001; day 2, 3, 6, 9: p < 0.001) their expression was strongly reduced in presence of the eluate of Luxatemp. Except for IL-6 at day 1 and 6 also the material 3Delta temp caused significant reduction of both proinflammatory mediators at any time point.

SIGNIFICANCE

The conventional material Luxatemp and the additive material 3Delta temp appear to severely affect cell viability when in direct contact with PDL-hTERTs. The other tested materials of this new category of additive materials and the subtractive material Grandio seem to induce only minor changes in direct contact with these cells. Therefore, they could serve as a viable alternative in the fabrication of temporary restorations.

The Dentist's Ability to Detect Different Restorative Procedures on Periapical Radiographs-Results from a Reliability Study

(1) Background: This in vitro reliability study aimed to determine the inter- and intra-examiner reliability for the detection of direct fillings, indirect crown restorations, root canal fillings and implants on periapical radiographs. (2) Methods: Fourteen dentists (<2 years of clinical experience = 11; >2 years of clinical experience = 3) participated in this diagnostic reliability study in which included a theoretical and practical educational training prior to data collection. The image set of periapical radiographs (N = 150) was examined in two evaluation rounds by all the dentists. Cohen's Kappa (CK) and a binary logistic regression model were computed. (3) Results: The inter- and intra-examiner reliability were found to be in almost perfect agreement: direct fillings (1st round 0.859/2nd round 0.844/intra 0.910), indirect crown restorations (0.932/0.926/0.955), root canal fillings (0.920/0.886/0.941) and dental implants (0.994/0.988/0.987). The binary logistic regression model revealed that the "evaluation round" and "dentist's clinical experience" had no significant influence, but for the "diagnostic category"; small, but statistically significant differences were documented. (4) Conclusions: The reliability for detecting direct and indirect restorations, root canal fillings or implants on periapical radiographs was found to be high in the present reliability study on periapical radiographs.

P11.15.B First multicentric real-life experience with the combination of lomustine and temozolomide in newly diagnosedMGMT promoter methylatedIDH wildtype glioblastoma

Background

The CeTeG/NOA-09 trial assessed in a randomized phase 3 setting, whether combined treatment of lomustine together with temozolomide was superior to temozolomide treatment alone in newly diagnosed MGMT (O(6)-methylguanine-DNA-methyltransferase) promoter methylated glioblastoma patients. Survival was significantly improved from 31.4 months with temozolomide alone to 48.1 months with the combination of lomustine plus temozolomide. In view of this encouraging data - suggesting this combination could have a significant impact on the survival of newly diagnosed glioblastoma patients - we were curious to assess safety and efficacy of this regimen under real-life conditions.

Material and Methods

We collected clinical and radiographic data from adult newly diagnosed MGMT promoter methylated IDH (isocitrate dehydrogenase) wildtype glioblastoma patients treated at five neuro-oncology centers in Germany. As a requirement for inclusion, first-line treatment with lomustine plus temozolomide had to be performed for at least six weeks (one course). The available radiographic data was independently reviewed by an experienced board-certified neuro-radiologist.

Results

In total, 70 patients were included. Median progression-free survival of the full cohort was 14.4 months and median overall survival was 36.0 months. Patients who received TTFields (Tumor Treating Fields) treatment for eight weeks or longer together with the combination of lomustine plus temozolomide (n=22, 31%) had a prolonged progression-free survival compared to those patients who received TTFields treatment less than eight weeks or did not receive treatment with TTFields (n=48, 69%) (21.5 months versus 11.2 months; HR: 2.118, 95% CI: 1.245-3.605; p=0.0105). In a multivariable Cox regression analysis the use of TTFields for eight weeks or longer together with the combination of lomustine plus temozolomide as well as the application of at least five courses of CeTeG therapy emerged as independent prognostic factors for progression-free survival and overall survival. Pseudoprogression occurred in n=16 (33%) of the patients. We observed no treatment related deaths and high-grade hematotoxicity in n=31 (44%) of the patients.

Conclusion

The results from this multicentric trial that investigated newly diagnosed MGMT promoter methylated IDH wildtype glioblastoma under real-life conditions indicate toxicity and survival estimates comparable to the CeTeG/NOA-09 trial. The use of TTFields for at least eight weeks in combination with this regimen was independently associated with extended progression-free and overall survival.

Oncology clinical trial disruption during the COVID-19 pandemic: a COVID-19 and cancer outcomes study

Background

COVID-19 disproportionately impacted patients with cancer as a result of direct infection, and delays in diagnosis and therapy. Oncological clinical trials are resource-intensive endeavors that could be particularly susceptible to disruption by the pandemic, but few studies have evaluated the impact of the pandemic on clinical trial conduct.

Patients and methods

This prospective, multicenter study assesses the impact of the pandemic on therapeutic clinical trials at two large academic centers in the Northeastern United States between December 2019 and June 2021. The primary objective was to assess the enrollment on, accrual to, and activation of oncology therapeutic clinical trials during the pandemic using an institution-wide cohort of (i) new patient accruals to oncological trials, (ii) a manually curated cohort of patients with cancer, and (ii) a dataset of new trial activations.

Results

The institution-wide cohort included 4756 new patients enrolled to clinical trials from December 2019 to June 2021. A major decrease in the numbers of new patient accruals (−46%) was seen early in the pandemic, followed by a progressive recovery and return to higher-than-normal levels (+2.6%). A similar pattern (from −23.6% to +30.4%) was observed among 467 newly activated trials from June 2019 to June 2021. A more pronounced decline in new accruals was seen among academically sponsored trials (versus industry sponsored trials) (P < 0.05). In the manually curated cohort, which included 2361 patients with cancer, non-white patients tended to be more likely taken off trial in the early pandemic period (adjusted odds ratio: 2.60; 95% confidence interval 1.00-6.63), and substantial pandemic-related deviations were recorded.

Conclusions

Substantial disruptions in clinical trial activities were observed early during the pandemic, with a gradual recovery during ensuing time periods, both from an enrollment and an activation standpoint. The observed decline was more prominent among academically sponsored trials, and racial disparities were seen among people taken off trial.

Bracket transfer accuracy with two different three-dimensional printed transfer trays vs silicone transfer trays

OBJECTIVES

To compare the transfer accuracy of two different three-dimensional printed trays (Dreve FotoDent ITB [Dreve Dentamid, Unna, Germany] and NextDent Ortho ITB [NextDent, Soesterberg, the Netherlands]) to polyvinyl siloxane (PVS) trays for indirect bonding.

MATERIALS AND METHODS

A total of 10 dental models were constructed for each investigated material. Virtual bracket placement was performed on a scanned dental model using OnyxCeph (OnyxCeph 3D Lab, Chemnitz, Germany). Three-dimensional printed transfer trays using a digital light processing system three-dimensional printer and silicone transfer trays were produced. Bracket positions were scanned after the indirect bonding procedure. Linear and angular transfer errors were measured. Significant differences between mean transfer errors and frequency of clinically acceptable errors (<0.25 mm/1°) were analyzed using the Kruskal-Wallis and χ2 tests, respectively.

RESULTS

All trays showed comparable accuracy of bracket placement. NextDent exhibited a significantly higher frequency of rotational error within the limit of 1° (P = .01) compared with the PVS tray. Although PVS showed significant differences between the tooth groups in all linear dimensions, Dreve exhibited a significant difference in the buccolingual direction only. All groups showed a similar distribution of directional bias.

CONCLUSIONS

Three-dimensional printed trays achieved comparable results with the PVS trays in terms of bracket positioning accuracy. NextDent appears to be inferior compared with PVS regarding the frequency of clinically acceptable errors, whereas Dreve was found to be equal. The influence of tooth groups on the accuracy of bracket positioning may be reduced by using an appropriate three-dimensional printed transfer tray (Dreve).

Influence of the tooth position, guided sleeve height, supporting length, manufacturing methods, and resin E-modulus on the in vitro accuracy of surgical implant guides in a free-end situation

PURPOSE

The study aims to evaluate the effect of tooth position, sleeve height, supporting length, resin E-modulus, and manufacturing method on the accuracy of dental implants placed in vitro fully guided in a lower jaw free-end situation.

MATERIAL AND METHODS

Using resin clones of a patient case providing a free-end situation 384 implants has been experimentally placed guided. The accuracy of postoperative implant position analyzed depending on the tooth position (first and second molar), sleeve height (2 and 6mm), supporting length (tooth no. 37-33 and 37 43), resin E-modulus (<2,000, >2,000, and >3,000 MPa), and manufacturing method (milled, printed). To determine the three-dimensional accuracy angular deviation, mean crestal, apical deviation, and the linear vertical deviation at apex were calculated separately for each group (n = 12).

RESULTS

The accuracy of implant placement using milled guides was affected only by the tooth position, indicating stronger deviation of implants replacing second molars than first molars. Considering printed guides, the implant position was influenced by tooth position, sleeve height, and supporting length. Linear vertical deviation >1 mm was found for printed materials with the lowest E-modulus at tooth position no. 37. Logistic regression analysis revealed a significant lower odds for linear vertical deviation >1 mm for materials with higher E-modulus (OR: 0.04; 95% CI:0.01-0.97; p = .048) and higher ratio for smaller sleeve height (OR: 2.77; 95% CI:1.20-6.38; p = .017).

CONCLUSION

Accuracy of implant placement in a free-end situation lacking distal tooth support is superior for milled as compared to 3D-printed surgical guides. When using 3D-printed surgical guides, smaller sleeve heights and extended tooth support improve the accuracy of implant placement.

Three-body wear of luting composites and influence of the ACTA wheel material

The aim of the study was to investigate the wear of luting materials (Variolink Esthetic LC/DC, Multilink Automix, Panavia V5 paste) compared to a resin composite (Tetric EvoFlow) with an ACTA-machine (three-body-wear simulator) using steel and 3D-printed polymer wheels. Wear was measured (software Match3D) and statistically analyzed (ANOVA). Worn surface was examined with a field-emission-scanning-electron-microscope. Finite element analysis was carried out to analyze differences in the mechanical stress of the two different sample wheels. Using the steel wheel, Variolink Esthetic DC exhibited significantly less wear than Tetric EvoFlow after 200,000 cycles (p=0.037). Luting composites on polymer wheels exhibited significantly lower wear values compared to the steel wheels (p<0.001). Finite element analysis showed higher stresses for the steel wheel compared to the polymer wheel. Mechanical properties of the sample wheels had a high influence on wear properties. Dual- or auto-polymerizing materials seem to have a small advantage over the light-curing materials.

Population-wide shifts in herbivore resistance strategies over succession

As a strategic cost-saving alternative to constitutive resistance, induction of resistance against herbivores in plants can be especially beneficial when enemies are scarce or variable in abundance. Although probably describing the two ends of a continuum, constitutive and induced resistance strategies have long been observed to trade off within species. Examining these traits among populations along a successional gradient can help explain how temporally variable environments can maintain genetic variation and how ecosystem processes are affected by shifting plant resistance trait expression over time. Here we leverage large experimental plots that represent a chronosequence of succession up to 15 yr in combination with common garden experiments to examine changes in the selective environment and genetic differences in tall goldenrod's (Solidago altissima) constitutive and induced resistance. We show that resistance against a specialist herbivore Trirhabda virgata was inducible in the plants originating from midsuccession, which coincides with the largest loads of herbivores. The flavonoid compound content of the leaves varied with successional stage of the population of origin, which is indicative of constitutive differences in secondary metabolite production. Finally, there was a clear trade-off between constitutive and induced resistance. Our study indicates that selection for resistance traits within a population can be highly variable over time and likely result in genetically determined shifts of resistance strategies over relatively short time periods via genotype sorting.

Meta-analysis of the longevity of commonly used pit and fissure sealant materials

OBJECTIVE

This systematic literature review and meta-analysis compared the clinical retention of primed or adhesively bonded sealants to that of conventional sealant materials.

METHODS

A search of the MEDLINE, EMBASE and CENTRAL databases identified 3707 abstracts published prior to 12/31/2017, of which 335 clinical publications were analysed in detail. A total of 67 studies included information about sealant retention after 24, 36, or 60 months of follow-up. A meta-analysis using a random effects model was conducted to calculate the pooled estimate of the retention rates for the five groups of sealants. Subgroup moderator analysis was performed to compare the pooled retention rate estimate (RRE) of primed sealants against those of the other groups.

RESULTS

Primed sealants had a 2-year pooled RRE of 43.2% (95% CI: 30.5-55.8), which was significantly inferior to those of auto-polymerizing (80.8%, 95% CI: 72.2-89) and light-polymerizing sealants (68.4%, 95% CI: 60.2-76.7). Fluoride-releasing and light-polymerizing sealants had the highest 3-year pooled RREs (86.4%, 95% CI: 73.4-99.3 and 83.1%, 95% CI: 75.6-90.7, respectively).

SIGNIFICANE

The results of this meta-analysis suggest that primed sealants cannot be fully recommended for clinical practice due to their moderate survival rates. Auto-polymerizing, light-polymerizing and fluoride-releasing sealants continue to be considered the reference standards for pit and fissure sealants. However, future generations and developments of primed sealant materials may change this position.

Corrigendum: A 3-year controlled randomized clinical study on the performance of two glass-ionomer cements in Class II cavities of permanent teeth

OBJECTIVE

To compare the clinical performance of two glass-ionomer cements in combination with two light-cured coatings in Class II cavities.

METHOD AND MATERIALS

In total, 43 Equia Fil/Equia Coat and 42 Fuji IX GP Fast/Fuji Coat LC restorations were placed, in 34 patients. Only Class II cavities with two- or three-surface restorations were included. The clinical performance was evaluated at baseline, after 1, 2, and 3 years using the FDI criteria. For the statistical analysis, Fisher exact test, Wilcoxon signed-rank test and Mann-Whitney U test were applied. The success and survival of the restorations were calculated with the Kaplan-Meier method and a log-rank test was used to detect significant differences between the tested materials.

RESULTS

At the 3-year recall, no significant differences could be detected between the two glass-ionomer cements for any of the evaluated criteria (Mann-Whitney U test, P > .05). When comparing the baseline with the recall data at 3 years for each material separately, significant changes could be observed in both materials for the criteria "surface luster," "fracture of material and retention," and "approximal anatomical form" (Wilcoxon signed-rank test, P < .05). Additionally, the Equia Fil restorations showed a notable change for the criteria "marginal adaptation" (Wilcoxon signed-rank test, P = .039). At the 3-year follow up, the Equia Fil and the Fuji IX GP Fast restorations exhibited an overall survival rate of 89.3% and 88.0%, respectively. Three fillings in each group failed.

CONCLUSION

The two glass-ionomer cements tested performed similarly in Class II cavities in adult patients, with a moderate failure rate after 3 years. (Original article published in Quintessence Int 2019;50:592-602; doi: 10.3290/j.qi.a42692).

Three-body wear of 3D printed temporary materials

OBJECTIVE

The aim of this study was to investigate the three-body wear of different additively manufactured temporary materials, one temporary PMMA material for CAD/CAM milling and one resin-based composite for direct restorations as a control group by using an ACTA machine.

METHODS

Specimens (n=8) of the 3D printing materials 3Delta temp, NextDent C&B, Freeprint temp were additively manufactured by DLP 3D printer. Postprocessing was carried out according to the manufacturer's specifications. Telio CAD were cut out of blocks, Tetric EvoCeram was applied directly and light cured. Three-body wear was simulated with an ACTA machine. Data were statistically analysed (ANOVA, post hoc test: Tukey, p<0.05). The worn surfaces of the specimens were examined with a FE-SEM.

RESULTS

The average mean wear was 50±15μm for Tetric EvoCeram<62±4μm for 3Delta temp<236±31μm for Telio CAD<255±13μm for NextDent C&B<257±24μm for Freeprint temp. After 200,000 cycles, the wear and wear rates for Tetric EvoCeram and 3Delta temp were significantly lower than those for the other materials. SEM revealed that 3Delta temp has a higher filler proportion than the other 3D printing materials but less than Tetric EvoCeram.

SIGNIFICANCE

The filler content influences the wear behaviour of additively manufactured materials as well as dental restorative composite materials. While most 3D printing materials have a low inorganic filler load, which qualifies the materials for temporary use only, one 3D printing material has an optimized composition that would qualify the material for longer clinical service time if wear is considered as the outcome variable.

3D Printing in Dentistry-State of the Art

Three-dimensional (3D) printing is a rapidly developing technology that has gained widespread acceptance in dentistry. Compared to conventional (lost-wax technique) and subtractive computer numeric controlled methods, 3D printing offers process engineering advantages. Materials such as plastics, metals, and ceramics can be manufactured using various techniques. 3D printing was introduced over three decades ago. Today, it is experiencing rapid development due to the expiration of many patents and is often described as the key technology of the next industrial revolution. The transition to its clinical application in dentistry is highly dependent on the available materials, which must not only provide the required accuracy but also the necessary biological and physical properties. The aim of this work is to provide an up-to-date overview of the different printing techniques: stereolithography, digital light processing, photopolymer jetting, material jetting, binder jetting, selective laser sintering, selective laser melting, and fused filament fabrication. Additionally, particular attention is paid to the materials used in dentistry and their clinical application.

What is an Appropriate Etching Time For Sealant Application on Permanent Molars? Results from a Meta-Analysis

PURPOSE

This meta-analysis investigated the influence of different acid etching times on the retention rate of pit-and-fissure sealants based on clinical trials with a minimum duration of two years.

MATERIALS AND METHODS

A literature search was carried out in electronic databases along with hand searching to identify clinical trials that evaluated pit-and-fissure sealants in permanent molars. From 1280 identified abstracts, 195 studies were selected for full-text analysis, and 28 studies with 36 test groups were included in this meta-analysis. Test groups with etching times of 15 (n = 3), 20 (n = 2), 30 (n = 10), 40 (n = 1) and 60 s (n = 20) were found. Incidence rates of pit-and-fissure sealant losses were modelled using negative binomial regression.

RESULTS

The regression analysis did not reveal a significant influence of etching time on the survival of pit-and-fissure sealants based on the identified and included clinical trials.

CONCLUSIONS

Due to the limited number of clinical data for 15 and 20 s, conclusions regarding very short acid etching times were not possible. On the basis of regression analysis, a minimum of 30-s acid etching might be sufficient prior to fissure sealing.

A 3-year controlled randomized clinical study on the performance of two glass-ionomer cements in Class II cavities of permanent teeth

OBJECTIVE

To compare the clinical performance of two glass-ionomer cements in combination with two light-cured coatings in Class II cavities.

METHOD AND MATERIALS

In total, 43 Equia Fil/Equia Coat and 42 Fuji IX GP Fast/Fuji Coat LC restorations were placed, in 34 patients. Only Class II cavities with two- or three-surface restorations were included. The clinical performance was evaluated at baseline, after 1, 2, and 3 years using the FDI criteria. For the statistical analysis, Fisher exact test, Wilcoxon signed-rank test and Mann-Whitney U test were applied. The success and survival of the restorations were calculated with the Kaplan-Meier method and a log-rank test was used to detect significant differences between the tested materials.

RESULTS

At the 3-year recall, no significant differences could be detected between the two glass-ionomer cements for any of the evaluated criteria (Mann-Whitney U test, P > .05). When comparing the baseline with the recall data at 3 years for each material separately, significant changes could be observed in both materials for the criteria "surface luster," "fracture of material and retention," and "approximal anatomical form" (Wilcoxon signed-rank test, P < .05). Additionally, the Equia Fil restorations showed a notable change for the criteria "marginal adaptation" (Wilcoxon signed-rank test, P = .039). At the 3-year follow up, the Equia Fil and the Fuji IX GP Fast restorations exhibited an overall survival rate of 86.21% and 84.0%, respectively.

CONCLUSION

The two glass-ionomer cements tested performed similarly in Class II cavities in adult patients, with a moderate to high failure rate after 3 years.

Effect of a Pulmonary Rehabilitation Program on the levels of anxiety and depression and on the quality of life of patients with chronic obstructive pulmonary disease

OBJECTIVE

To analyze the effect of a Pulmonary Rehabilitation Program (PRP) on the levels of anxiety and depression and the quality of life of patients with chronic obstructive pulmonary disease.

METHOD

Patients with chronic obstructive pulmonary disease (COPD) who completed the PRP of 3 weekly sessions of 60 min duration for 12 weeks, a total of 36 sessions, were assessed using Beck Inventory (BAI and BDI) and Saint George's Respiratory Questionnaire (SGRQ).

RESULTS

A total of 125 individuals, with an average age of 63.7 ± 8.8 years, FEV1: 1.17 ± 0.57L (43.18 ± 18.79% predicted), 61.6% male and 38.4% female, were analyzed. The BAI and BDI before and after PRP were, respectively, 10.15 ± 6.32 vs. 7.67 ± 7.21; p=0.0041 and 12.60 ± 7.99 vs. 8.96 ± 7.29; p=0.00016. The results of the SGRQ domains were, respectively, Before and After symptoms (48.53 ± 20.41 vs. 32.58 ± 18.95), Activity (69.15 ± 20.79 vs. 52.42 ± 23.70), Impact (32.92 ± 18.29 vs. 20.27 ± 16.70), Total (46.69 ± 16.90 vs. 32.07 ± 16.96). When correlating the BDI to the domains of the SGRQ, weak correlations were observed (Symptoms r=0.22; p=0.01; Activity r=0.28; p=0.001; Impact r=0.52; p=2.72; Total r=0.44; p=0.17). In the same way, weak correlations were observed when correlating the BAI to the SGRQ (Symptoms r=0.28; p=0.0009; Activity r=0.32; p=0.0005; Impact r=0.42; p=7.33; Total r=0.43; p=0.74).

CONCLUSION

Although the PRP improves levels of depression and anxiety as well as the quality of life in patients with COPD, no significant correlation of these analyzed variables was observed.

Discriminant construct validity of ImPACT™: a companion study

In a previous analysis of ImPACT scores relative to traditional neuropsychological tests (NP) and experimental tasks (Maerlender et al., 2010 ) we demonstrated convergent construct validity for the primary ImPACT test-score composites. A complete analysis of discriminant validity was not undertaken at that time. Here, test scores from the 54 collegiate football and hockey players were re-analyzed to specifically address the discriminant validity of the ImPACT™ composite scores using a multiply operationalized correlation matrix of multi-trait multi-method data. In the method used here, discriminant validity is determined by obtaining non-significant correlations between a target score when correlated with the average of the other trait measurements (multiply-operationalized multi-trait-mono-method analysis). Results showed that the ImPACT™ Verbal Memory (p = .044), Visual Memory (p = .006), and Visual Motor Speed (p = .000) scores were highly correlated with composites of the other scores, while the Reaction Time composite demonstrated adequate discriminant validity (p = .145). In comparison all of the NP composites showed good discrimination (all p-values >.05, except for Reaction Time p = .05). Thus the apparent lack of discriminability between three of four composite scores in this sample raises questions about using ImPACT™ composite scores to support specific construct-oriented interpretations. Taken together, the discriminant and convergent construct validity properties of ImPACT™ indicate construct sensitivity, but limited construct specificity.

Examination of the construct validity of ImPACT™ computerized test, traditional, and experimental neuropsychological measures

Although computerized neuropsychological screening is becoming a standard for sports concussion identification and management, convergent validity studies are limited. Such studies are important for several reasons: reference to established measures is needed to establish validity; examination of the computerized battery relative to a more traditional comprehensive battery will help understand the strengths and limitations of the computer battery; and such an examination will help inform the output of the computerized battery. We compared scores on the ImPACT™ battery to a comprehensive battery of traditional neuropsychological measures and several experimental measures used in the assessment of sports-related concussion in 54 healthy male athletes. Convergent validity was demonstrated for four of the five ImPACT™ domain scores. Two cognitive domains often compromised as a result of mild TBI were not directly identified by the ImPACT™ battery: sustained attention and auditory working memory. Affective symptoms correlated with performance on measures of attention and working memory. In this healthy sample the correlations between the domains covered by ImPACT™ and the neuropsychological battery supports ImPACT™ as a useful screening tool for assessing many of the cognitive factors related to mTBI. However, the data suggest other sources of data need to be considered when identifying and managing concussions.

The endoscopic Draf II frontal sinusotomy: non-navigated approach

OBJECTIVE

Endoscopic endonasal Draf II frontal sinusotomy is indicated for a variety of pathologies such as mucocele and non-responsive chronic frontal sinusitis. However, this approach is challenged and controversial. The objectives were to evaluate the advantages, disadvantages, indications, and rate of complications of this approach, without the use of a navigation system.

METHODS

The files and computed tomography (CT) scans of 25 patients who underwent endoscopic endonasal Draf II sinusotomy at Assaf Harofeh Medical Center between 1999 and 2002 were reviewed.

RESULTS

Thirty-one frontal sinuses were operated on and follow-up was between 18 and 62 months (average 30.3). Twenty-two sinuses (71%) had previous surgery. The Draf II procedure was used in 3.7% of all cases during the survey period. The most frequent indication for surgery was inflammation (48%) followed by mucocele (28%). In all but 2 sinuses (93%), the frontal floor between the lamina papyracea and the middle concha was drilled out. Twenty-four patients (96%) were successfully ventilated. No major complications were noted.

CONCLUSIONS

The Draf II approach can be used safely and successfully without a navigation system, including cases of revision endoscopic sinus surgery. Correct interpretation of the surgical field and a CT scan are crucial for success. Careful patient selection is essential for this procedure.

Clinical characteristics of patients with ischemic ocular nerve palsies and lacunar brain infarcts: a retrospective comparative study

BACKGROUND

Ischemic ocular motor nerve palsies (IOMP) and lacunar brain infarcts share a similar pathological mechanism. The clinical characteristics of patients as well as the protective role of aspirin should therefore be similar in both conditions.

METHODS

The medical records of 107 consecutive patients with IOMP and 160 patients with lacunar cerebrovascular accidents (CVA) were reviewed and analyzed with respect to patient characteristics, vascular risk factors, and aspirin intake. The data on patients with and without aspirin were compared within each group as well as between both groups.

RESULTS

Hyperlipidemia, smoking, high carotid stenosis (>70%) and the presence of more than one vascular risk factor in an individual patient were found to be more common in patients with lacunar brain infarcts regardless of aspirin intake. Absence of vascular risk factors was encountered more in IOMP patients. The recurrence of lacunar CVA was significantly higher than recurrence of IOMP. A history of Bell's palsy was more common in IOMP patients than in patients with lacunar CVA. Within the IOMP group, the prevalence of vascular risk factors did not differ between the aspirin and non-aspirin group. Ischemic heart disease (IHD), CVA and recurrence were found more often in the aspirin group. Within the CVA group hypertension, IHD, cardiac arrhythmia and recurrence rate were more common in the aspirin group whereas smoking was found to be more common in the non-aspirin group of patients.

CONCLUSIONS

Arteriosclerosis is the main cause of lacunar CVA and IOMP. However, IOMP depends less on the presence of vascular risk factors than does lacunar CVA. Furthermore, aspirin - at least at low doses - does not seem to have a protective effect on either of these conditions, but more extensive prospective studies of homogeneous groups of patients are needed to clarify the preventive role of antiplatelet agents in IOMP.

Omental infarction: an unusual cause of acute abdomen in children

Acute abdomen is caused by a wide variety of etiologies, many of which require surgical intervention. Two boys were hospitalized for acute abdominal pain and low-grade fever. Physical examination revealed epigastric and right upper abdominal fullness, and laboratory studies showed elevated erythrocyte sedimentation rates, with normal leukocyte counts and coagulation profiles. Abdominal ultrasound and computerized tomography revealed pseudotumor in both cases. Symptomatic treatment and cefazolin were administered, and pain and fever subsided after 6 to 10 days. Pseudotumor due to omental infarction can present as acute abdomen in children. A high index of suspicion and the use of both ultrasonography and computerized tomography will help avoid unnecessary surgical intervention in such cases.

Inner ear damage in children due to noise exposure from toy cap pistols and firecrackers: a retrospective review of 53 cases

This retrospective study presents the findings of inner ear damage documented in 53 children exposed to impulsive sound emitted by toy weapons and firecrackers. There were 49 boys and four girls aged between four and fourteen years. Thirty-nine children were affected unilaterally while fourteen had bilateral hearing loss (total of 67 ears). Most of the hearing loss (>70%) was sensorineural high frequency hearing loss, while only nine out of the 67 injured ears had sensorineural mid frequency hearing loss. Seven children sustained a traumatic ear drum perforation. Dizziness or tinnitus was reported by twenty children, with pathological ENG findings in four of them. This paper re-emphasizes the possibility of inner ear damage in children from exposure to noisy toys.

Remarkable morphological diversity of viruses and virus-like particles in hot terrestrial environments

Electron microscopic studies of the viruses in two hot springs (85 degrees C, pH 1.5-2.0, and 75-93 degrees C, pH 6.5) in Yellowstone National Park revealed particles with twelve different morphotypes. This diversity encompassed known viruses of hyperthermophilic archaea, filamentous Lipothrixviridae, rod-shaped Rudiviridae, and spindle-shaped Fuselloviridae, and novel morphotypes previously not observed in nature. Two virus types resembled head-and-tail bacteriophages from the families Siphoviridae and Podoviridae, and constituted the first observation of these viruses in a hydrothermal environment. Viral hosts in the acidic spring were members of the hyperthermophilic archaeal genus Acidianus.

Serum leptin level in women with idiopathic intracranial hypertension

Leptin is a protein secreted by adipose cells which influences regulation of energy balance and body weight. Idiopathic intracranial hypertension (IIH) is recognised as a neurological disorder mainly affecting obese females. The aim of this study was to evaluate the association between IIH and serum leptin level in 15 obese patients and compare the results with those for 16 obese and 15 non-obese women. A significantly higher serum leptin level was found in patients with IIH than in controls (p<0.0001), and this did not correlate with body mass index (BMI). Serum leptin levels were significantly associated with BMI in both control groups (p<0.0006). Additional factors must therefore be involved in the phenomenon of serum leptin increase beyond weight gain. The cause can only be hypothesised, but it seems that the origin is central, probably hypothalamic.