Studies of the Specific Activity of Aerosolized Isoniazid against Tuberculosis in a Mouse Model

The aerosol inhalation delivery of isoniazid in mice was investigated, and the specific activity of the aerosol form of isoniazid was studied with the mouse model of tuberculosis infection, the M. tuberculosis H37Rv strain. Aerosol delivery was performed using a laminar-flow horizontal nucleation chamber. The inhalation dose was measured in real-time mode using a diffusion aerosol spectrometer. The mean particle diameter was 0.6 ± 0.03 μm, and the inhalation dose was 5–9 mg/kg. Pharmacokinetic measurements were carried out in nose-only and whole-body chambers. Isoniazid concentration in blood serum and its mass in the lungs were measured as a function of time using high-performance liquid chromatography. Studies of the specific activity of aerosolized isoniazid reveal that treatment with the aerosol lead to the complete recovery of the experimental tuberculosis infection as early as after 28 days after the start of inhalation treatment, while in the animals from the group receiving isoniazid per-orally, sole revivable tuberculosis mycobacteria were detected. Histologic examinations show that only a few macrophagal (nonspecific) granulomas without mycobacteria were detected in the spleen after per-oral and aerosol treatment, the number of granulomas on the 28th day being three times smaller in the latter case. The results show that the developed technique of isoniazid aerosol inhalation may have clinical potential.

Aerosol inhalation delivery of cefazolin in mice: Pharmacokinetic measurements and antibacterial effect

Aerosol inhalation delivery of cefazolin, a broad-spectrum first-generation cephalosporin antibiotic, was investigated. Inhalation system based on ultrasonic nebulizer was developed for the generation of dry cefazolin aerosol within mean particle diameter range 0.5-3.0 μm and mass concentration 0.01-3 μg/cm³. Pharmacokinetic measurements were carried out for the aerosolized form of cefazolin delivered in mice using nose-only chamber. Cefazolin concentrations in blood serum and in the lungs of mice were measured as a function of time by means of high performance liquid chromatography. Body-delivered dose depending on particle size, concentration and inhalation time as well as other pharmacokinetic parameters were determined. The antibacterial effect of aerosolized cefazolin was assessed through the aerosol inhalation treatment of mice infected with Klebsiella pneumoniae. Survival rate for infected mice after the treatment with cefazolin aerosol demonstrated high antibacterial efficiency of the inhalation delivery of cefazolin in comparison with intraperitoneal delivery.

Aerosol Inhalation Delivery of Triazavirin in Mice: Outlooks for Advanced Therapy Against Novel Viral Infections

Under pandemic-caused emergency, evaluation of the potential of existing antiviral drugs for the treatment of COVID-19 is relevant. Triazavirin, an antiviral drug developed in Russia for per-oral administration, is involved in clinical trials against SARS-CoV-2 coronavirus. This virus has affinity to epithelial cells in respiratory tract, so drug delivery directly in lungs may enhance therapeutic effect and reduce side effects for stomach, liver, kidneys. We elaborated ultrasonic method of triazavirin aerosol generation and investigated the inhalation delivery of this drug in mice. Mean particle size and number concentration of aerosol used in inhalation experiments are 560 nm and 4 × 105 cm-3, respectively. Aerosol mass concentration is 1.6 × 10-4 mg/cm3. Inhalation for 20 min in a nose-only chamber resulted in 2 mg/kg body delivered dose and 2.6 μg/mL triazavirin concentration in blood plasma. Elimination rate constant determined in aerosol administration experiments was ke = 0.077 min-1, which agrees with the value measured after intravenous delivery, but per-oral administration resulted in considerably lower apparent elimination rate constant of pseudo-first order, probably due to non-linear dependence of absorption rate on triazavirin concentration in gastrointestinal tract. The bioavailability of triazavirin aerosol is found to be 85%, which is about four times higher than for per-oral administration.

Supramolecular Complex of Ibuprofen with Larch Polysaccharide Arabinogalactan: Studies on Bioavailability and Pharmacokinetics

BACKGROUND AND OBJECTIVES

In the present work, pharmacological and pharmacokinetic properties of the supramolecular complex of non-steroid anti-inflammatory drug ibuprofen (IBU) with natural polysaccharide arabinogalactan (AG) were studied. The main goals of such complexation were the increase of ibuprofen's bioavailability and decrease its effective dose after oral administration.

METHODS

The complex with mass ratio as IBU:AG 1:10 was obtained by mechanochemical synthesis and characterized by water solubility, electron microscopy, differential scanning calorimetry, X-ray powder diffraction analysis and ¹H-nuclear magnetic resonance spectroscopy. Different animal models of pain and inflammation was used to investigate IBU:AG biological effects. Plasma concentration of IBU and its pharmacokinetic parameters were evaluated after oral introduction.

RESULTS

It was found that ibuprofen's effective analgesic and anti-inflammatory dose decreased twofold after its introduction as a complex with AG. The reason of this difference is due to the increase of ibuprofen concentration in rats' plasma: C _max of IBU at doses of 20 and 40 mg/kg was found as 0.088 and 0.132 μg/ml, whereas C _max of IBU in the complex form was 0.103 and 0.160 μg/ml, respectively.

CONCLUSIONS

Thus, we have shown that complexation of the IBU with AG results in its bioavailability increase, reduction of the effective dose and should decrease toxic side effects.

Experimental study of homogeneous nucleation from the bismuth supersaturated vapor: evaluation of the surface tension of critical nucleus

The homogeneous nucleation of bismuth supersaturated vapor is studied in a laminar flow quartz tube nucleation chamber. The concentration, size, and morphology of outcoming aerosol particles are analyzed by a transmission electron microscope (TEM) and an automatic diffusion battery (ADB). The wall deposit morphology is studied by scanning electron microscopy. The rate of wall deposition is measured by the light absorption technique and direct weighting of the wall deposits. The confines of the nucleation region are determined in the "supersaturation cut-off" measurements inserting a metal grid into the nucleation zone and monitoring the outlet aerosol concentration response. Using the above experimental techniques, the nucleation rate, supersaturation, and nucleation temperature are measured. The surface tension of the critical nucleus and the radius of the surface of tension are determined from the measured nucleation parameters. To this aim an analytical formula for the nucleation rate is used, derived from author's previous papers based on the Gibbs formula for the work of formation of critical nucleus and the translation-rotation correction. A more accurate approach is also applied to determine the surface tension of critical drop from the experimentally measured bismuth mass flow, temperature profiles, ADB, and TEM data solving an inverse problem by numerical simulation. The simulation of the vapor to particles conversion is carried out in the framework of the explicit finite difference scheme accounting the nucleation, vapor to particles and vapor to wall deposition, and particle to wall deposition, coagulation. The nucleation rate is determined from simulations to be in the range of 10(9)-10(11) cm(-3) s(-1) for the supersaturation of Bi(2) dimers being 10(17)-10(7) and the nucleation temperature 330-570 K, respectively. The surface tension σ(S) of the bismuth critical nucleus is found to be in the range of 455-487 mN/m for the radius of the surface of tension from 0.36 to 0.48 nm. The function σ(S) changes weakly with the radius of critical nucleus. The value of σ(S) is from 14% to 24% higher than the surface tension of a flat surface.

Evaluation of surface tension and Tolman length as a function of droplet radius from experimental nucleation rate and supersaturation ratio: Metal vapor homogeneous nucleation

Zinc and silver vapor homogeneous nucleations are studied experimentally at the temperature from 600 to 725 and 870 K, respectively, in a laminar flow diffusion chamber with Ar as a carrier gas at atmospheric pressure. The size, shape, and concentration of aerosol particles outcoming the diffusion chamber are analyzed by a transmission electron microscope and an automatic diffusion battery. The wall deposit is studied by a scanning electron microscope (SEM). Using SEM data the nucleation rate for both Zn and Ag is estimated as 10(10) cm(-3) s(-1). The dependence of critical supersaturation on temperature for Zn and Ag measured in this paper as well as Li, Na, Cs, Ag, Mg, and Hg measured elsewhere is analyzed. To this aim the classical nucleation theory is extended by the dependence of surface tension on the nucleus radius. The preexponent in the formula for the vapor nucleation rate is derived using the formula for the work of formation of noncritical embryo [obtained by Nishioka and Kusaka [J. Chem. Phys. 96, 5370 (1992)] and later by Debenedetti and Reiss [J. Chem. Phys. 108, 5498 (1998)]] and Reiss replacement factor. Using this preexponent and the Gibbs formula for the work of formation of critical nucleus the dependence of surface tension on the radius R(S) of the surface of tension is evaluated from the nucleation data for above-mentioned metals. For the alkali metals and Ag the surface tension was determined to be a strong function of R(S). For the bivalent metals (Zn, Hg, and Mg) the surface tension was independent of radius in the experimental range. A new formula for the Tolman length delta as a function of surface tension and radius R(S) is derived by integration of Gibbs-Tolman-Koenig equation assuming that delta is a monotonic function of radius. The formula derived is more correct than the Tolman formula and convenient for the elaboration of experimental data. Using this formula the values of delta are determined as a function of R(S) from the experimental nucleation data. It is determined that all the metals considered are characterized by strong dependence of delta on radius; for the bivalent metals delta changes sign.