Cold Spray: Over 30 Years of Development Toward a Hot Future

Cold Spray (CS) is a deposition process, part of the thermal spray family. In this method, powder particles are accelerated at supersonic speed within a nozzle; impacts against a substrate material triggers a complex process, ultimately leading to consolidation and bonding. CS, in its modern form, has been around for approximately 30 years and has undergone through exciting and unprecedented developmental steps. In this article, we have summarized the key inventions and sub-inventions which pioneered the innovation aspect to the process that is known today, and the key breakthroughs related to the processing of materials CS is currently mastering. CS has not followed a liner path since its invention, but an evolution more similar to a hype cycle: high initial growth of expectations, followed by a decrease in interest and a renewed thrust pushed by a number of demonstrated industrial applications. The process interest is expected to continue (gently) to grow, alongside with further development of equipment and feedstock materials specific for CS processing. A number of current applications have been identified the areas that the process is likely to be the most disruptive in the medium-long term future have been laid down.

Intermetallic Phase Evolution of Cold-Sprayed Ni-Ti Composite Coatings: Influence of As-Sprayed Chemical Composition

Owing to low-temperature deposition conditions and high deposition rate, cold spray offers unique advantages in manufacturing a wide variety of metallic and composite coatings including metal matrix composites produced from physically blended powders. One of the challenges of producing composite coatings using cold spray is the deviation of coatings composition from the blended feedstock powder composition. This is of utmost importance as it affects the composition and phase evolution of intermetallic forming coatings during post spray heat treatment. In this work, cold spray of composite Ni-Ti coatings and formation of intermetallics from post spray heat treatment were investigated as a first step to examine the potential of producing equiatomic bulk Ni-Ti by cold spray. Three different physically blended Ni and Ti powders mixtures were sprayed on titanium substrates to address the coating composition variation from the blended feedstock powder and study its influence on phase evolution during post spray heat treatment. High-density and well-dispersed composite coatings were achieved for each case. EDS analysis revealed as-sprayed coatings with 10.5, 35.9 and 56.9 at.% Ni (and with balanced Ti ratios) from the three powder mixtures. Annealing treatments were conducted at 400, 500 and 900 °C for 1 and 2 h and comparative studies of the intermetallic compound formations were carried out. Microstructural investigation showed that all three equilibrium intermetallics phases of binary Ni-Ti phase diagram (Ni3Ti, Ti2Ni and NiTi) formed in the two Ni-rich composite coatings with NiTi phase being maximum in the coating with the closest composition to equiatomic ratio while only Ti2Ni phase formed in the Ti-rich coating after annealing. Thermal etching analysis of coatings showed that NiTi phase forms with a gradient microstructure from Ti splats boundary toward the center of splats, which is attributed to the grain refinement of CS samples at splat boundary and intermetallic nucleation mechanism.

Sur la formation de composés bicycliques lors de réactions de Friedel–Crafts

The acylation of 1-methylcyclohexene with propionyl, butyryl, and benzoyl chloride in the presence of different Lewis acids is reported. The exo and endo 1-acyl-6-methyl bicyclo [3.1.0]hexane isomers are formed with variable percentages depending upon the catalyst used. An unexpected compound, 3-benzoyl-2-methylcyclohexanol, was isolated from the reaction of 1-methylcyclohexene with benzoyl chloride. The acylation of 1,3,3,5,5-pentamethylcyclohexene with acetyl chloride – stannic chloride gave no bicyclic compounds.