Peristaltic hemodynamics of a new pediatric circulatory assist system for Fontan circulation using shape memory alloy fibers

Fontan procedure is one of the common surgical treatments of congenital heart diseases. Patients with Fontan circulation have single ventricle in the systemic circulation with the total cavopulmonary connection. We have been developing a pulmonary circulatory assist device using shape memory alloy fibers for Fontan circulation with total cavopulmonary connection. It consisted of the shape memory alloy fibers, the diameter of which are 100 µm. The fibers could wrap the ePTFE conduit for Fontan TCPC connection from the outside. We designed the sequential motion control system for sophisticated pulmonary hemodynamics by the pulsatile flow generation. In order to achieve pulsatile flow assistance in pulmonary arterial system, we fabricated a mechanical structure by sequential contraction of shape memory alloy fibers. Then, we developed a sequential contraction controller for the assist system, which could reproduce the wall contractile velocity at 6.0 to 20.0 cm/sec. We examined hemodynamic characteristic of its function using a mock circulatory system, which consisted of two overflow tanks representing venous and pulmonary arterial pressures in Fontan circulation. As a result, the pulmonary circulation assist device with sequential contraction could achieve effective promotion of the pulsatility in pulmonary arterial flow.

Controlling methods of a newly developed extra aortic counter-pulsation device using shape memory alloy fibers

Diastolic counter-pulsation has been used to provide circulatory augmentation for short term cardiac support. The success of intra-aortic balloon pump (IABP) therapy has generated interest in long term counter-pulsation strategies to treat heart failure patients. The authors have been developing a totally implantable extra aortic pulsation device for the circulatory support of heart failure patients, using 150 µm Ni-Ti anisotropic shape memory alloy (SMA) fibers. These fibers contract by Joule heating with an electric current supply. The special features of our design are as follow: non blood contacting, extra aortic pulsation function synchronizing with the native heart, a wrapping mechanical structure for the aorta in order to achieve its assistance as the aortomyoplsty and the extra aortic balloon pump. The device consisted of rubber silicone wall plates, serially connected for radial contraction. We examined the contractile function of the device, as well as it controlling methods; the phase delay parameter and the pulse width modulation, in a systemic mock circulatory system, with a pneumatically driven silicone left ventricle model, arterial rubber tubing, a peripheral resistance unit, and a venous reservoir. The device was secured around the aortic tubing with a counter-pulsation mode of 1:4 against the heartbeat. Pressure and flow waveforms were measured at the aortic outflow, as well as its driving condition of the contraction phase width and the phase delay. The device achieved its variable phase control for co-pulsation or counter-pulsation modes by changing the phase delay of the SMA fibers. Peak diastolic pressure significantly augmented, mean flow increased (p<0.05) according to the pulse width modulation. Therefore the newly developed extra aortic counter-pulsation device using SMA fibers, through it controlling methods indicated its promising alternative extra aortic approach for non-blood contacting cardiovascular circulatory support.

Examination of mitral regurgitation with a goat heart model for the development of intelligent artificial papillary muscle

Annuloplasty for functional mitral or tricuspid regurgitation has been made for surgical restoration of valvular diseases. However, these major techniques may sometimes be ineffective because of chamber dilation and valve tethering. We have been developing a sophisticated intelligent artificial papillary muscle (PM) by using an anisotropic shape memory alloy fiber for an alternative surgical reconstruction of the continuity of the mitral structural apparatus and the left ventricular myocardium. This study exhibited the mitral regurgitation with regard to the reduction in the PM tension quantitatively with an originally developed ventricular simulator using isolated goat hearts for the sophisticated artificial PM. Aortic and mitral valves with left ventricular free wall portions of isolated goat hearts (n=9) were secured on the elastic plastic membrane and statically pressurized, which led to valvular leaflet-papillary muscle positional change and central mitral regurgitation. PMs were connected to the load cell, and the relationship between the tension of regurgitation and PM tension were measured. Then we connected the left ventricular specimen model to our hydraulic ventricular simulator and achieved hemodynamic simulation with the controlled tension of PMs.

Structural design of a newly developed pediatric circulatory assist device for Fontan circulation by using shape memory alloy fiber

Total cavopulmonary connection (TCPC) is commonly applied for the surgical treatment of congenital heart disease such as single ventricle in pediatric patients. Patients with no ventricle in pulmonary circulation are treated along with Fontan algorithm, in which the systemic venous return is diverted directly to the pulmonary artery without passing through subpulmonary ventricle. In order to promote the pulmonary circulation after Fontan procedure, we developed a newly designed pulmonary circulatory assist device by using shape memory alloy fibers. We developed a pulmonary circulatory assist device as a non-blood contacting mechanical support system in pediatric patients with TCPC. The device has been designed to be installed like a cuff around the ePTFE TCPC conduit, which can contract from outside. We employed a covalent type functional anisotropic shape memory alloy fiber (Biometal, Toki Corporation, Tokyo Japan) as a servo actuator of the pulmonary circulatory assist device. The diameter of this fiber was 100 microns, and its contractile frequency was 2-3 Hz. Heat generation with electric current contracts these fibers and the conduit. The maximum contraction ratio of this fiber is about 7% in length. In order to extend its contractile ratio, we fabricated and installed mechanical structural units to control the length of fibers. In this study, we examined basic contractile functions of the device in the mock system. As a result, the internal pressure of the conduit increased to 63 mmHg by the mechanical contraction under the condition of 400 msec-current supply in the mock examination with the overflow tank of 10 mmHg loading.

Sensorless control for a sophisticated artificial myocardial contraction by using shape memory alloy fibre

The authors have been developing an artificial myocardium, which is capable of supporting natural contractile function from the outside of the ventricle. The system was originally designed by using sophisticated covalent shape memory alloy fibres, and the surface did not implicate blood compatibility. The purpose of our study on the development of artificial myocardium was to achieve the assistance of myocardial functional reproduction by the integrative small mechanical elements without sensors, so that the effective circulatory support could be accomplished. In this study, the authors fabricated the prototype artificial myocardial assist unit composed of the sophisticated shape memory alloy fibre (Biometal), the diameter of which was 100 microns, and examined the mechanical response by using pulse width modulation (PWM) control method in each unit. Prior to the evaluation of dynamic characteristics, the relationship between strain and electric resistance and also the initial response of each unit were obtained. The component for the PWM control was designed in order to regulate the myocardial contractile function, which consisted of an originally-designed RISC microcomputer with the input of displacement, and its output signal was controlled by pulse wave modulation method. As a result, the optimal PWM parameters were confirmed and the fibrous displacement was successfully regulated under the different heat transfer conditions simulating internal body temperature as well as bias tensile loading. Then it was indicated that this control theory might be applied for more sophisticated ventricular passive or active restraint by the artificial myocardium on physiological demand.

Assessment of synchronization measures for effective ventricular support by using the shape memory alloy fibred artificial myocardium in goats

Thromboembolic and haemorrhagic complications are the primary causes of mortality and morbidity in patients with artificial hearts, which are known to be induced by the interactions between blood flow and artificial material surfaces. The authors have been developing a new mechanical artificial myocardial assist device by using a sophisticated shape memory alloy fibre in order to achieve the mechanical cardiac support from outside of the heart without a direct blood contacting surface. The original material employed as the actuator of artificial myocardial assist devices was 100um fibred-shaped, which was composed of covalent and metallic bonding structure and designed to generate 4-7 % shortening by Joule heating induced by the electric current input. In this study, we focused on the synchronization of the actuator with native cardiac function, and the phase delay parameter was examined in animal experiments using Saanen goats. Total weight of the device including the actuator was around 150g, and the electric power was supplied transcutaneously. The device could be successfully installed into thoracic cavity, which was able to be girdling the left ventricle. The contraction of the device could be controlled by the originally designed microcomputer. The mechanical contraction signal input had been transmitted with the phase delay of 50-200 msec after the R-wave of ECG, and hemodynamic changes were investigated. Cardiac output and systolic left ventricular pressure were elevated with 20% delay of cardiac cycle by 27% and 7%, respectively, although there was smaller difference under the condition of the delay of over 30%. Therefore, it was suggested that the synchronization measures should be examined in order to achieve sophisticated ventricular passive/active support on physiological demand.

Development of an Artificial Myocardium using a Covalent Shape-memory Alloy Fiber and its Cardiovascular Diagnostic Response

The authors have been developing a newly-designed totally-implantable artificial myocardium using a covalent shape-memory alloy fibre (Biometal&#174;, Toki Corporation), which is attached onto the ventricular wall and is also capable of supporting the natural ventricular contraction. This mechanical system consists of a contraction assistive device, which is made of Ti-Ni alloy. And the phenomenon of the martensitic transformation of the alloy was employed to achieve the physiologic motion of the device. The diameter of the alloy wire could be selected from 45 to 250&#956;m. In this study, the basic characteristics of the fiber of 150&#956;m was examined to design the sophisticated mechano-electric myocardium. The stress generated by the fiber was 400gf under the pulsatile driving condition (0.4W, 1Hz). Therefore it was indicated that the effective assistance might be achieved by using the Biometal shape-memory alloy fiber.

Digital fluorescence imaging of trafficking of endosomes containing low-density lipoprotein in brain astroglial cells

We have used digital fluorescence microscopy to examine transport of LDL-containing endosomes in rat brain astroglial cells to show that individual middle endosomes undergo rapid transitions between forward/backward movements and immobile states over short distances. The population of rapidly moving endosomes (>0.04 microm/sec) was 35. 9%, and the remaining endosomes were slowly moving or temporarily immobile (<0.04 microm/sec). The averaged motion was, however, a very slow perinuclear motion with a velocity of 3.25 microm/h. This small velocity is mainly due to frequent changing of directions in movements, requiring 6 h for a significant concentration around the circumference of the cell nuclei. The application of both anti-dynein antibodies and vanadate in permeabilized cells resulted in peripherally concentrated distribution of endosomes, probably due to inhibition of perinuclear motion by dynein-like motor proteins. These results imply that both dynein-like and kinesin-like proteins bind to the same endosome resulting in both perinuclear and peripherally directed movements.

General pharmacology of meloxicam--Part II: Effects on blood pressure, blood flow, heart rate, ECG, respiratory minute volume and interactions with paracetamol, pirenzepine, chlorthalidone, phenprocoumon and tolbutamide

The pharmacodynamic properties of meloxicam, a new nonsteroidal antiinflammatory drug (NSAID), that go beyond those typical of an NSAID were examined. The extent to which meloxican shows NSAID-like interactions with paracetamol, pirenzepine, chlorthalidone, phenprocoumon and tolbutamide was also investigated. In the dose range studied, meloxicam had no influence on the blood pressure of the unanaesthetized rat, blood flow, heart rate, ECG and respiratory minute volume of the anaesthetized cat or on the blood pressure, heart rate and respiratory minute volume of the anaesthetized dog. The acute toxicity level of meloxicam after oral and parenteral administration to the rat and mouse proved considerably lower than that of indomethacin. Meloxicam showed excellent tissue tolerability following parenteral administration. The effects against inflammatory pain and acute antiexudative effects of meloxicam were enhanced by simultaneous low doses of paracetamol. Pirenzepine showed an antagonistic effect on the ulcerogenicity of meloxicam in the rat stomach. The diuretic effect of chlorthalidone in the rat was not influenced by high doses of meloxicam. The effect of phenprocoumon in the rat was enhanced by high doses of meloxicam. However, the hypoglycaemic effect of tolbutamide in the rabbit was not influenced by meloxicam.

General pharmacology of meloxicam--Part I: Effects on CNS, gastric emptying, intestinal transport, water, electrolyte and creatinine excretion

The general pharmacodynamic properties of meloxicam, a new nonsteroidal anti-inflammatory drug (NSAID), were examined. Characteristics that distinguish meloxicam from conventional NSAIDs were investigated. No central-nervous-system effects were observed in the mouse at oral doses up to 100 mg/kg. In vitro studies showed meloxicam had no antagonistic properties against mediators such as histamine, PGE2 and angiotensin II. The rate of gastric emptying or intestinal transport in the rat was not influenced by therapeutic doses of meloxicam and, of all the NSAIDs investigated, meloxicam showed the mildest effect on gastric acidity. In doses well above those required for anti-inflammatory action, meloxicam had no influence on water, electrolyte or creatinine excretion.

Effects of acetylsalicylic acid, paracetamol and caffeine and a combination of these substances on kidney glutathione levels

Following preliminary tests in which rats proved to be fairly insensitive to the depletory effect of paracetamol (CAS 103-90-2) on kidney glutathione levels, old male mice from a strain exhibiting particular susceptibility to paracetamol were investigated in respect of the comparative effects of paracetamol, acetylsalicylic acid (CAS 50-78-2, ASA) and caffeine (CAS 58-08-2), and a combination of these substances, on kidney glutathione levels. Additionally, the effects of paracetamol and ASA on hepatic glutathione in mice were also measured. When administered separately at oral doses of 150-600 mg/kg both paracetamol and ASA produced dose- and time-dependent depletion of kidney glutathione concentrations in the mice. The effect of ASA at a given dose was weaker than that of paracetamol. Caffeine showed only a very weak and transient depletory effect up to an oral dose of 60 mg/kg. The effects of the combined administration of paracetamol and ASA on kidney glutathione levels were only additive in nature. The administration of caffeine did not increase the reduction in kidney glutathione levels produced by the combination of paracetamol and ASA. The reduction in hepatic glutathione induced in the mice by paracetamol was considerably more pronounced than that observed in the kidneys. ASA, on the other hand, did not affect glutathione in the mouse liver at those doses which had led to a reduction in kidney glutathione levels.

Meloxicam: a potent inhibitor of adjuvant arthritis in the Lewis rat

The effects of meloxicam, piroxicam, diclofenac and tenidap on the swelling of hind paws, radiologically-detectable bone and cartilage destruction of hind paws, increase in spleen weight, increase in erythrocyte sedimentation rate and changes in serum protein composition in male Lewis rats with adjuvant arthritis were studied following once-daily oral administration of these drugs for 21 days. All the drugs dose-dependently inhibited hind paw swelling. For equal activity against hind paw swelling caused by the secondary reaction, the required daily dose of piroxicam was about twice that of meloxicam; those of diclofenac and tenidap were about 3.5 and 60 times higher respectively. The bone and cartilage destruction induced by adjuvant arthritis were inhibited by meloxicam at low daily doses and by piroxicam at doses approximately four times those of meloxicam. Diclofenac and tenidap had only a weak effect on radiologically-detectable lesions when administered at doses sufficient to reduce paw swelling. Meloxicam also had a dose-dependent corrective effect on the systemic changes which occur in adjuvant arthritic rats, e.g. increase in spleen weight, increase in erythrocyte sedimentation rate and changes in serum protein composition. Piroxicam produced similar effects, at 3-4 times higher doses. Diclofenac and tenidap did not show comparable effects when administered at appropriate doses. These findings indicate that the action of meloxicam and piroxicam differs from that of diclofenac and tenidap in adjuvant arthritis in the Lewis rat. At oral doses which significantly reduce edema formation, only meloxicam and piroxicam showed a significant effect on systemic parameters of adjuvant disease in the Lewis rat.

Anti-inflammatory, analgesic, antipyretic and related properties of meloxicam, a new non-steroidal anti-inflammatory agent with favourable gastrointestinal tolerance

The anti-inflammatory, analgesic and antipyretic properties of the new non-steroidal anti-inflammatory agent, meloxicam, were investigated in a variety of animal models and compared with the properties of piroxicam, diclofenac, indomethacin and several other NSAIDs. With respect to the total effect of a single oral dose, the anti-exudative effect of meloxicam on carrageenan-induced oedema in the rat exceeded that of all the NSAIDs included in the comparison. Additionally, meloxicam showed the greatest potency of all the compounds examined with respect to adjuvant-induced arthritis in the rat, the granuloma pouch model and the cotton pellet test in the rat. Unlike indomethacin, in the carrageenan pleurisy model in the rat, meloxicam caused both a dose-dependent reduction in exudate volume and also inhibition of leucocyte migration. Meloxicam showed a strong and lasting effect on inflammatory pain in the rat. Like other NSAIDs, but unlike dipyrone, meloxicam had no effect in the hot plate and tail clamp tests, which are used to identify weak central analgesic effects. Unlike dipyrone and like indomethacin, meloxicam had no effect in a model of visceral distention pain. In common with other NSAIDs, meloxicam had no influence on the body temperature of normothermic rats in the anti-inflammatory dose range, but did reduce yeast-induced fever in the rat in a dose-dependent manner. Like piroxicam, meloxicam had a uricosuric effect on rats treated with oxonic acid. Low-dose meloxicam inhibited both bradykinin-induced and PAF-induced bronchospasm in the guinea-pig, but had no effect on acetylcholine-induced bronchospasm. Piroxicam had greater ulcerogenic effects in the rat stomach than meloxicam. The therapeutic range of meloxicam in the rat, with regard to inhibition of adjuvant arthritis, was several times greater than that of piroxicam, indomethacin, diclofenac and naproxen.