Nitrogen potential recovery and concentration of ammonia from swine manure using electrodialysis coupled with air stripping

The practice of intensive animal production in certain areas has resulted in excessive manure production for the available regional land base. Consequently, there is a need to develop treatment technologies to recover the valuable nutrients that manure contains so that the resulting product can be transported and used as fertilizer on agricultural land. The project presented here used electrodialysis in a dilution/concentration configuration to transfer the manure ammonia in the diluate solution by electromigration to an adjacent solution separated by an ion-exchange membrane under the driving force of an electrical potential. Then, air stripping from the electrodialysis-obtained concentrate solution without pH modification was used to isolate the ammonia in an acidic solution. An optimal process operating voltage of 17.5 V was first determined on the basis of current efficiency and total energy consumption. During the process, the swine manure pH varied from 8.5 to 8.2, values favourable for NH(4)(+) electromigration. Total ammonia nitrogen reached 21,352 mg/L in the concentrate solution, representing approximately seven times the concentration in the swine manure. Further increases in concentration were limited by water transfer from the diluate solution due to electroosmosis and osmosis. Applying vacuum to the concentrate reservoir was found to be more efficient than direct concentrate solution aeration for NH(3) recuperation in the acid trap, given that the ammonia recuperated under vacuum represented 14.5% of the theoretical value of the NH(3) present in the concentrate solution as compared to 6.2% for aeration. However, an excessively low concentrate solution pH (8.6-8.3) limited NH(3)volatilization toward the acid trap. These results suggest that the concentrate solution pH needs to be raised to promote the volatile NH(3) form of total ammonia nitrogen.

Fouling characterization of electrodialysis membranes used for the recovery and concentration of ammonia from swine manure

The aim of the present study was to: (1) identify the nature of fouling for ED membranes (AMX and CMB, from Tokuyama Soda, Japan) used for the isolation and concentration of total NH(3)-N from swine manure, (2) determine the effect of fouling on membrane integrity, (3) establish the relation between fouling type and manure composition, and (4) estimate the efficiency of a two-step cleaning procedure to restore membranes properties. After processing 10 batches of swine manure (or 240 L/m(2)), the average current density as well as the membranes electrical conductivity and ion-exchange capacity decreased. The decline in process performance was associated with membrane fouling, since a significant deposit, possibly calcium carbonate and silica colloidal particles, was observed on the fouled AMX membranes. The electrical conductivity and ion-exchange capacity of the CMB membrane was completely restored by a two-step cleaning procedure using 0.5% NaOH and 1% HCl. However, for the electrical conductivity of the AMX membranes it was only partially recovered. The on-line cleaning procedure efficiency was assessed by measuring the stack average current density and the decrease of manure conductivity during 1h tests. Values for the cleaned membranes were, respectively, 95% and 91% the ones measured with the new membranes, and were significantly higher than for the fouled membranes.

Use of electrodialysis and reverse osmosis for the recovery and concentration of ammonia from swine manure

This project aimed at producing a concentrated nitrogen fertilizer from liquid swine manure using electrodialysis (ED) and reverse osmosis (RO), as a mean to help resolve the excess nutrient problem faced by many swine producers, and offer an alternative to chemical nitrogen fertilizer production. Different types of ED membranes were evaluated based on the NH4+ transfer rate, current efficiency and membrane stability. A combination of CMB/AMX membranes was retained due to its high NH4+ transfer rate and chemical stability. The maximum total ammonia concentration (NH3-N) achievable by ED was limited by water transport from the manure to the concentrate compartment, and ammonia volatilization (17%) from the open concentrate compartment. Results suggested that, under the conditions of this experiment, a maximum total NH3-N concentration of about 16g/L could be reached with the ED system. An ED concentrate (8.7g/L of total NH3-N) was also fed to TFC-HF reverse osmosis membranes. A mass balance analysis revealed that the RO permeate, which represented 49.6% of the initial volume, contained 8.6% of the ammonia. However, the RO concentrate contained only 66.6% of the initial total NH3-N, suggesting that 21.2% of the ammonia was volatilized during the concentration test with RO membranes. Ammonia concentration in the RO concentrate reached approximately 13g/L, which is similar to the maximum concentration that could be achieved by ED. These results suggest that the use of ED and RO membranes to recover and concentrate ammonia is potentially interesting but the process must include an approach to minimize ammonia volatilization or trap volatilized ammonia.

Bipolar membrane electroacidification of demineralized skim milk

The aim of this study was to evaluate the effect of decreasing the mineral content of skim milk by electrodialysis (ED) prior to electroacidification with bipolar membrane (BMEA) on the performance of the process, the chemical composition, and the physicochemical and functional properties of the isolates produced. ED used to demineralize the skim milk solution was very efficient. However, the electroacidification parameters were influenced by the demineralization level of the skim milk solution: the energy efficiency was decreased with an increase in demineralization, but it was still possible to perform BMEA at a very low conductivity level. Moreover, the isolates produced by BMEA after electrodialysis demineralization at different rates showed similar chemical composition, except on potassium and lactose contents for 75% demineralized isolate. These isolates, except on protein load for 75% demineralization rate, showed similar physicochemical and functional properties, whatever the demineralization rate.

Effect of added salt and increase in ionic strength on skim milk electroacidification performances

Bipolar-memibrane electroacidification (BMEA) technology which uses the property of bipolar membranes to split water and the demineralization action of cation-exchange membranes (CEM), was tested for the production of acid casein. BMEA has numerous advantages in comparison with conventional isoelectric precipitation processes of proteins used in the dairy industry. BMEA uses electricity to generate the desired ionic species to acidify the treated solutions. The process can be precisely controlled, as electro-acidification rate is regulated by the effective current density in the cell. Water dissociation at the bipolar membrane interface is continuous and avoids local excess of acid. In-situ generation of dangerous chemicals (acids and bases) reduces the risks associated with the handling, transportation, use and elimination of these products. The aim of this study was to evaluate the performance of BMEA in different conditions of added ionic strength (p(added) = 0, 0.25, 0.5 and 1.0 M) and added salt (CaCl2, NaCl and KCl). The combination of KCl and p(added) = 0.5 M gave the best results with a 45% decrease in energy consumption. The increased energy efficiency was the result of a decrease in the anode/cathode voltage difference. This was due to an increase of conductivity, produced by addition of salt, necessary to compensate for the lack of sufficiently mobile ions in the skim milk. However, the addition of salts, irrespective of type or ionic strength, increased the required operation time. The protein profile of isolates were similar under all experimental conditions, except at 1.0 M-CaCl2.

Effect of cationic membrane permselectivity on the efficiency of skim milk electroacidification

Bipolar membrane electroacidification (BMEA) uses the property of bipolar membranes to split water and the demineralization action of cation-exchange membranes (CEM). As milk mineral salt content is very sensitive to ionic strength and pH changes, the aim of this study was to better understand the effect of changes in mineral content during pH decrease and demineralization of skim milk. The objectives were to investigate the effect of different cationic permselective membranes (CSV and CMX membranes) on skim milk cation migration and protein precipitation during BMEA. The permselectivity of both membranes tested does not influence the final efficiency of BMEA. The purity of the bovine milk casein isolates produced was similar to or higher (97-98% versus 93.4-96.7) than those of commercial isolates, due to a reduced ash content (1.2 versus 2.0-3. 8%) resulting from the CEM demineralizing phenomenon. For both membranes, the main ionic species to migrate was the potassium ions.

Effect of temperature on the separation of soybean 11 S and 7 S protein fractions during bipolar membrane electroacidification

The purpose of this study was to evaluate the effect of temperature (10 and 27 degrees C) on the efficiency of bipolar membrane electroacidification (BMEA) to fractionate soybean proteins. BMEA is a technology derived from electrodialysis, based on the isoelectric precipitation of proteins. It appears that temperature has a significant effect on the selective precipitation of the soybean protein fractions, mainly 11 S and 7 S, during BMEA. At 27 degrees C, the precipitation profile of the four protein fractions is situated in a pH range from 6.6 to 4.4, with no possibility of separating any of theses fractions. However, at 10 degrees C, the 11 S globulin precipitates at a higher pH than at 27 degrees C, pH 6.7 vs 5.9, allowing the fractionation of 11 S from the other fractions. Using electroacidification it is possible to obtain a precipitate solution enriched in the 11 S fraction (71.8% of 11 S and 10.8% of 7 S) and a supernatant solution enriched in the 7 S fraction (46.6% of 7 S and 4.6% of 11S).

Bipolar membrane electroacidification to produce bovine milk casein isolate

Bipolar membrane electroacidification (BMEA) has been developed previously (Bazinet et al., Report for the Canadian Electricity Association 9326 U 987, 1996; Bazinet et al., J. Agric. Food Chem. 1997, 45, 2419-2425, 3788-3794) and has been used for isoelectric precipitation of soybean proteins. The purpose of this study was to validate the feasibility of BMEA for the precipitation of milk casein and to investigate the effect of flow rate. High-purity isolates containing 1.23 and 2.00% ash and 85.4 and 91.6% total protein were obtained with flow rates of 0.2 and 1.2 gal/min. The molecular composition profiles of the isolates obtained by HPLC showed that only caseins were precipitated. However, except for protein precipitation curves, the flow rate did not influence the final composition and purity of the isolates. These results showed that BMEA is a new alternative process for the production of high-purity bovine milk casein isolate.