Suppression of stimulated Raman scattering employing long period gratings in double-clad fiber amplifiers

We report on the suppression of stimulated Raman scattering (SRS) in a double-clad fiber amplifier using long-period gratings (LPGs). The LPGs, fabricated with a CO(2) laser, achieve SRS suppression by coupling the Stokes wavelength from the active core into the cladding. With only three LPGs inserted into a fiber pulse amplifier, the extractable Raman-free output power was nearly doubled. A numerical simulation of the setup shows good agreement with the experimental results.

Spectral beam combination of fiber amplified ns-pulses by means of interference filters

In this paper we introduce a simple scheme to spectrally combine four single beams using three low-cost dielectric interference filters as combining elements. 25 ns pulses from four independent and actively Q-switched fiber seed-sources are amplified in a single stage fiber-amplifier. Temporally and spatially combined 208 W of average power and 6.3 mJ of pulse energy are obtained at two different repetition frequencies. A detailed analysis of beam quality as well as the thermal behavior of the combining elements is carried out and reveals mutual dependency.

Efficient high-power generation of visible and mid-infrared light by degenerate four-wave-mixing in a large-mode-area photonic-crystal fiber

An efficient and simple approach for converting pulsed near-IR laser radiation into visible and mid-IR light by exploiting degenerate four-wave-mixing in an endlessly single-mode, large-mode-area photonic-crystal fiber is presented. Coupling a 1 MHz, 200 ps, 8 W average power pulsed source emitting at 1064 nm into this fiber results in average powers of 3 W at 673 nm signal wavelength and of 450 mW at 2539 nm idler wavelength, respectively. The excellent pulse energy conversion efficiencies of 35% for the signal and 6% for the idler wavelength are due to the unique combination of characteristics of this type of fiber.

High-pulse-energy passively Q-switched quasi-monolithic microchip lasers operating in the sub-100-ps pulse regime

We present passively Q-switched microchip lasers with items bonded by spin-on-glass glue. Passive Q-switching is obtained by a semiconductor saturable absorber mirror. The laser medium is a Nd:YVO(4) crystal. These lasers generate pulse peak powers up to 20 kW at a pulse duration as short as 50 ps and pulse repetition rates of 166 kHz. At 1064 nm, a linear polarized transversal and longitudinal single-mode beam is emitted. To the best of our knowledge, these are the shortest pulses in the 1 microJ energy range ever obtained with passively Q-switched microchip lasers. The quasi-monolithic setup ensures stable and reliable performance.

Compact 10-GHz Nd:GdVO4 laser with 0.5-W average output power and low timing jitter

We demonstrate a compact, diode-pumped Nd:GdVO4 laser with a repetition rate of 9.66 GHz and 0.5-W average output power. The laser is passively mode locked with a semiconductor saturable absorber mirror (SESAM), yielding 12-ps-long sech2-shaped pulses. For synchronization of the pulse train to an external reference clock, the SESAM is mounted on a piezoelectric transducer. With an electronic feedback loop of only a few kilohertz loop bandwidth we achieved a rms timing jitter of 146 fs (integrated from 10 Hz to 10 MHz). This is an upper limit because it is mostly limited by the measurement system. The laser setup with a simple linear cavity has a footprint of only 130 mm x 30 mm.