Palatability Assessments of Beef Top Loin Steaks Sourced from Three Quality Grade/Brand Categories from Texas and Non-Texas Processing Establishments

Beef top loin steaks from Top Choice (Modest and Moderate marbling), Choice (primarily Small marbling), and Select (Slight marbling) beef strip loins from Texas and Non-Texas (Kansas, Nebraska, and Colorado) beef processing establishments were obtained to determine the role of source and USDA grade/brand category on consumer sensory panel and Warner-Bratzler shear (WBS) evaluations. The number of strip loins obtained were 58 Texas Top Choice, 54 Texas Choice, and 56 Texas Select and 60 Non-Texas Top Choice, 52 Non-Texas Choice, and 58 Non-Texas Select. There were source × USDA grade/brand category interactions for overall liking (P = 0.012) and tenderness liking (P = 0.002) in which the Texas Top Choice steaks received ratings that did not differ (P > 0.05) from Texas Select steaks but did differ (P < 0.05) from the Non-Texas Top Choice steaks. There were no (P = 0.079) differences in WBS values for steaks from the 2 sources even though the P value approached significance. For USDA quality grade/brand category, there were differences (P < 0.001) in WBS values, but not in the direction one might expect: Choice steaks had the lowest (P < 0.05) WBS values compared with those from Top Choice and Select steaks, which did not differ (P > 0.05) from each other. Percentage dis- tribution of WBS values according to tenderness categories showed that all of the Top Choice and Choice steaks, regardless of source, had values that met the threshold values for Very Tender (WBS < 31.4 N) or Tender (31.4 N < WBS < 38.3 N). While geographic purchasing biases may remain, these data assist in supporting informed decisions regarding palatability and consumer acceptability as functions of beef sourcing.

Effects of temperament at feedlot arrival and breed type on growth efficiency, feeding behavior, and carcass value in finishing heifers

Objectives were to evaluate the effects of temperament at feedlot arrival and breed type on productivity, feed efficiency, feeding behavior, and carcass quality traits in finishing beef heifers, and to examine interactions between temperament and breed type. Heifers (Angus, Braford, Brangus, and Simbrah, N = 411, BW = 280 kg) were fed a high-grain diet (ME = 3.0 Mcal/kg DM) in pens equipped with electronic feed bunks. Quality grade (QG), yield grade (YG), and Warner-Bratzler shear (WBS) force values (day 1 and 14 postmortem) were evaluated. Relative exit velocity (REV) at feedlot arrival was used as a covariate in mixed models to assess the effects of temperament and interactions with breed type, with means compared at ±1 SD from the mean initial REV. Calm heifers (mean REV minus 1 SD) had 4% greater (P < 0.001) initial BW, 12% greater (P < 0.001) ADG, 8% greater (P < 0.001) DMI, and 4% greater (P < 0.02) G:F than heifers with excitable temperaments (mean REV plus 1 SD). A temperament × breed interaction was detected (P < 0.01) for residual feed intake (RFI). Braford heifers had a more (P < 0.05) negative REV covariate slope (-1.49 ± 0.65) than the other breeds, such that excitable Braford heifers had lower (P < 0.05) RFI than the other breeds with excitable temperaments. Temperament × breed interactions were observed (P < 0.001) for DMI per BW0.75 and bunk visit (BV) duration. Braford heifers had more (P < 0.05) negative REV covariate slopes for both traits than Angus, Brangus, and Simbrah heifers such that excitable Braford heifers consumed less (P < 0.05) DMI per BW0.75 and had less BV duration compared to excitable Angus and Brangus heifers. Calm heifers had 9% greater (P < 0.01) meal duration, and consumed meals that were 22% longer (P < 0.001) and 17% larger (P < 0.001) compared to excitable heifers. Calm heifers had 12% more (P < 0.001) BV events per meal then excitable heifers. Carcasses from calm heifers were 4% heavier (P < 0.05) and had 7% greater (P = 0.05) backfat (BF) depth and tended to have 4% greater (P = 0.07) USDA YG than carcasses from excitable heifers. Additionally, loin steaks from calm heifers had 8% lower (P < 0.05) WBS force than steaks from excitable heifers. Based on a carcass grid with discounts and premiums for HCW, QG, YG, and tenderness, calm heifers returned $62 more (P < 0.01) revenue per animal than excitable heifers. These results demonstrate that heifers with divergent phenotypes for temperament on feedlot arrival differ in their performance, feed efficiency, and feeding behavior patterns, as well as carcass quality and revenue.

National Beef Quality Audit-2016: assessment of cattle hide characteristics, offal condemnations, and carcass traits to determine the quality status of the market cow and bull beef industry

To continue the series that began in 1994, the National Beef Quality Audit (NBQA) – 2016 was conducted to quantify the quality status of the market cow and bull beef sector, as well as determine improvements made in the beef and dairy industry since 2007. The NBQA-2016 was conducted from March through December of 2016, and assessed hide-on carcasses (n = 5,278), chilled carcasses (n = 4,285), heads (n = 5,720), and offal items (n = 4,800) in 18 commercial processing facilities throughout the United States. Beef cattle were predominantly black-hided; 68.0% of beef cows and 67.2% of beef bulls possessed a black hide. Holstein was the predominant type of dairy animal observed. Just over half (56.0%) of the cattle surveyed had no mud contamination on the hide, and when mud was present, 34.1% of cattle only had small amounts. Harvest floor assessments found 44.6% of livers, 23.1% of lungs, 22.3% of hearts, 20.0% of viscera, 8.2% of heads, and 5.9% of tongues were condemned. Liver condemnations were most frequently due to abscess presence. In contrast, contamination was the primary reason for condemnation of all other offal items. Of the cow carcasses surveyed, 17.4% carried a fetus at the time of harvest. As expected, mean carcass weight and loin muscle area values observed for bulls were heavier and larger than cows. The marbling scores represented by cull animal carcasses were most frequently slight and traces amounts. Cow carcasses manifested a greater amount of marbling on average than bull carcasses. The predominant fat color score showed all carcasses surveyed had some level of yellow fat. Only 1.3% of carcasses exhibited signs of arthritic joints. Results of the NBQA-2016 indicate there are areas in which the beef and dairy industries have improved and areas that still need attention to prevent value loss in market cows and bulls.

National Beef Quality Audit - 2016: Survey of carcass characteristics through instrument grading assessments

The instrument grading assessment portion of the National Beef Quality Audit (NBQA) - 2016 allows the unique opportunity to evaluate beef carcass traits over the course of a year. One week of instrument grading data was collected each month from 5 beef processing corporations encompassing 18 facilities from January 2016 through December 2016 ( = 4,544,635 carcasses). Mean USDA yield grade (YG) was 3.1 with 1.37 cm fat thickness (FT), 88.9 cm LM area, 393.6 kg HCW, and 2.1% KPH. Frequency distribution of USDA YG was 9.5% YG 1, 34.6% YG 2, 38.8% YG 3, 14.6% YG 4, and 2.5% YG 5. Increases in HCW and FT since the NBQA-2011 were major contributors to differences in mean YG and the (numerically) increased frequency of YG 3, 4, and 5 carcasses found in the current audit. Mean marbling score was Small, and the distribution of USDA quality grades was 4.2% Prime, 71.4% Choice, 21.7% Select, and 2.7% other. Frequency of carcasses grading Prime on Monday (6.43%) was numerically higher than the average frequency of carcasses grading Prime overall (4.2%). Monthly HCW means were 397.6 kg in January, 397.2 kg in February, 396.5 kg in March, 389.3 kg in April, 384.8 kg in May, 385.0 kg in June, 386.1 kg in July, 394.1 kg in August, 399.1 kg in September, 403.9 kg in October, 406.5 kg in November, and 401.9 kg in December. Monthly mean marbling scores were Small in January, Small in February, Small in March, Small in April, Small in May, Small in June, Small in July, Small in August, Small in September, Small in October, Small in November, and Small in December. Both mean HCW and mean marbling score declined in the months of May and June. The month with the greatest numerical frequency of dark cutters was October (0.74%). Comparison of overall data from in-plant carcass and instrument grading assessments revealed close alignment of information, especially for YG (3.1 for in-plant assessment versus 3.1 for instrument grading) and marbling (Small for in-plant assessment versus Small for instrument grading). These findings allow the beef industry access to the greatest volume of beef value-determining characteristics for the U.S. fed steer and heifer population than ever reported, resulting in potentially more precise targeting of future quality and consistency efforts.

National Beef Quality Audit-2016: In-plant survey of carcass characteristics related to quality, quantity, and value of fed steers and heifers

The National Beef Quality Audit (NBQA)-2016 used in-plant cooler assessments to benchmark the current status of the fed steer and heifer beef industry in the United States. In-plant cooler assessments ( = 9,106 carcasses) were conducted at 30 facilities, where approximately 10% of a single day's production were evaluated for USDA quality grade (QG) and yield grade (YG) factors. Frequencies of evaluated traits were 66.5% steer and 33.4% heifer sex classes and 82.9% native, 15.9% dairy-type, and 1.2% estimated breed types. Mean USDA YG factors were 1.42 cm for adjusted fat thickness, 89.5 cm for LM area, 390.3 kg for HCW, and 1.9% for KPH. Mean USDA YG was 3.1, with a frequency distribution of 9.6% YG 1, 36.7% YG 2, 39.2% YG 3, 12.0% YG 4, and 2.5% YG 5. Mean USDA QG traits were Small for marbling score, A for overall maturity, A55 for lean maturity, and A for skeletal maturity. Mean USDA QG was Select with a frequency distribution of QG of 3.8% Prime, 67.3% Choice, 23.2% Select, and 5.6% lower score. Lower score included dark cutter (1.9%), blood splash (0.1%), and hard bone, which are USDA overall maturity scores of C or older (1.8%). Marbling score distributions were 0.85% Slightly Abundant or greater, 7.63% Moderate, 23.54% Modest, 39.63% Small, 23.62% Slight, and 0.83% Traces or less. Carcasses that were Choice or Select and USDA YG 2 or 3 accounted for 70.7% of the carcasses evaluated. Compared with the previous NBQA, we found a numerical increase in mean USDA YG, USDA QG, adjusted fat thickness, HCW, LM area, and marbling score with an increase in dairy-type carcasses and percentage of carcasses grading USDA Prime and Choice as well as frequency of USDA YG 4 and 5. The findings from this study will be used by all segments of the industry to understand and improve the quality of fed steer and heifer beef that is being produced.

National Beef Quality Audit-2016: Transportation, mobility, live cattle, and carcass assessments of targeted producer-related characteristics that affect value of market cows and bulls, their carcasses, and associated by-products

The National Beef Quality Audit–2016 marks the fourth iteration in a series assessing the quality of live beef and dairy cows and bulls and their carcass counterparts. The objective was to determine the incidence of producer-related defects, and report cattle and carcass traits associated with producer management. Conducted from March through December of 2016, trailers (n = 154), live animals (n = 5,470), hide-on carcasses (n = 5,278), and hide-off hot carcasses (n = 5,510) were surveyed in 18 commercial packing facilities throughout the United States. Cattle were allowed 2.3 m² of trailer space on average during transit indicating some haulers are adhering to industry handling guidelines for trailer space requirements. Of the mixed gender loads arriving at processing facilities, cows and bulls were not segregated on 64.4% of the trailers surveyed. When assessed for mobility, the greatest majority of cattle surveyed were sound. Since the inception of the quality audit series, beef cows have shown substantial improvements in muscle. Today over 90.0% of dairy cows are too light muscled. The mean body condition score for beef animals was 4.7 and for dairy cows and bulls was 2.6 and 3.3, respectively. Dairy cattle were lighter muscled, yet fatter than the dairy cattle surveyed in 2007. Of cattle surveyed, most did not have horns, nor any visible live animal defects. Unbranded hides were observed on 77.3% of cattle. Carcass bruising was seen on 64.1% of cow carcasses and 42.9% of bull carcasses. However, over half of all bruises were identified to only be minor in severity. Nearly all cattle (98.4%) were free of visible injection-site lesions. Current results suggest improvements have been made in cattle and meat quality in the cow and bull sector. Furthermore, the results provide guidance for continued educational and research efforts for improving market cow and bull beef quality.

National Beef Quality Audit-2016: Phase 1, Face-to-face interviews

The National Beef Quality Audit (NBQA) is conducted every 5 yr and was most recently again conducted in 2016. Face-to-face interviews gauged progress in quality associated with live cattle production using procedures first utilized in NBQA 2011. The 2016 NBQA was the first in which interviews concerning fed steers and heifers were combined with an audit of market cow and bull beef. Face-to-face interviews were designed to illicit definitions for beef quality, estimate willingness to pay (WTP) for quality attributes, establish relative importance rankings for important quality factors, and assess images, strengths, weaknesses, potential threats, and shifting trends in the beef industry since the 2011 audit. Individuals making purchasing decisions in 5 market sectors of the steer/heifer and cow/bull beef supply chain were interviewed, including packers (n = 36), retailers (including large and small supermarket companies and warehouse food sales companies; n = 35), food service operators (including quick-serve, full-service, and institutional establishments; n = 29), further processors (n = 64), and peripherally-related government and trade organizations (GTO; n = 30). Face-to-face interviews were conducted between January and November of 2016 using a designed dynamic routing system. Definitions (as described by interviewees) for 7 pre-determined quality factors, including: (1) How and where the cattle were raised, (2) Lean, fat, and bone, (3) Weight and size, (4) Visual characteristics, (5) Food safety, (6) Eating satisfaction, and (7) Cattle genetics were recorded verbatim and categorized into similar responses for analysis. Compared to NBQA-2011, a higher percentage of companies were willing to pay premiums for guaranteed quality attributes, but overall were willing to pay lower average premiums than the companies interviewed in 2011. Food safety had the highest share of preference among all interviewees, generating a double-digit advantage over any other quality factor. The 2 beef industries have an overall positive image among interviewees, and despite lingering weaknesses, product quality continued to be at the forefront of the strengths category for both steer and heifer beef and market cow and bull beef.

National Beef Tenderness Survey—2015: Palatability and Shear Force Assessments of Retail and Foodservice Beef

Beef retail steaks from establishments across 11 US cities and beef foodservice steaks from establishments in 6 US cities were evaluated using Warner-Bratzler shear (WBS) force and consumer sensory panels. The average post-fabrication aging time of steaks at retail establishments was 25.9 d with a range of 6 to 102 d, and those from foodservice establishments averaged 31.5 d with a range of 3 to 91 d. The retail steaks with the lowest WBS value (P < 0.05) was the boneless top loin, compared to the top round steaks, which had the higher (P < 0.05) average WBS value. For the foodservice sector, top loin and ribeye steaks had the lowest (P < 0.05) WBS values, whereas the top sirloin represented the highest (P < 0.05) WBS values. The top blade retail steaks received among the highest consumer ratings (P < 0.05), whereas the top round and bottom round steaks received among the lowest (P < 0.05) consumer ratings for overall liking, tenderness liking, tenderness level, flavor liking, and juiciness liking. For the foodservice sector, the ribeye and top loin steaks were rated higher (P < 0.05) than top sirloin steaks for all consumer rating categories. The WBS values and sensory ratings were comparable to previous surveys, indicating no substantial changes in tenderness. Additional emphasis in improving the tenderness of top and bottom round steaks is necessary to increase consumer acceptability of these cuts.

National Beef Quality Audit-2016: Transportation, mobility, and harvest-floor assessments of targeted characteristics that affect quality and value of cattle, carcasses, and by-products

The National Beef Quality Audit-2016 (NBQA-2016) was conducted to assess current transportation, mobility, and quality characteristics of U.S. fed steers and heifers. Data were collected at 17 beef processing facilities between March and November 2016. About 8,000 live cattle were evaluated for transportation and mobility, and about 25,000 carcasses were evaluated on the slaughter floor. Cattle were in transit to the slaughter facility for a mean duration of 2.7 h from a mean distance of 218.5 km using trailers with dimensions ranging from 17.84 m² to 59.09 m². Area allotted per animal averaged 1.13 m² and ranged from 0.85 m² to 2.28 m². A total of 96.8% of cattle received a mobility score of 1 (walks easily, no apparent lameness). Identification types (35.1% had multiple) were lot visual tags (61.5%), individual tags (55.0%), electronic tags (16.9%), metal-clip tags (9.2%), bar-coded tags (0.05%), wattles (0.01%), and other (2.6%). Cattle were black-hided (57.8%), Holstein (20.4%), red-hided (10.5%), yellow-hided (4.8%), gray-hided (2.9%), brown-hided (1.3%), and white-hided (1.1%). Unbranded hides were observed on 74.3% of cattle; 18.6% had brands located on the butt, 6.3% on the side, and 1.3% on the shoulder (values exceed 100% due to multiple brands). For hide-on carcasses, 37.7% displayed no mud or manure; specific locations for mud or manure were legs (40.8%), belly (33.0%), tail region (15.5%), side (6.8%), and top-line (3.9%). Cattle without horns represented 83.3% of the sample, and cattle that did have horns measured: < 2.54 cm (5.5%), 2.54 to 12.7 cm (8.3%), and > 12.7 cm (2.9%). Carcasses without bruises represented 61.1% of those sampled, whereas 28.2% had 1, 8.2% had 2, 2.1% had 3, and 0.3% had 4 bruises. Of those carcasses with a bruise, the bruise was located on the loin (29.7%), round (27.8%), chuck (16.4%), rib (14.4%), and brisket/plate/flank (11.6%). Frequencies of offal condemnations were livers (30.8%), lungs (18.2%), viscera (16.3%), hearts (11.1%), heads (2.7%), and tongues (2.0%). Compared to NBQA-2011, fewer cattle were identified for traceability, fewer were black-hided, a greater number were Holstein cattle, more with no brand and no horns, fewer without bruises, more liver, lung, and viscera condemnations, and fewer heads and tongues were condemned. The NBQA remains an influential survey for the U.S. beef industry to provide benchmarks and strategic plans for continued improvement of beef quality and consistency.

Phase I of The National Beef Quality Audit-2011: quantifying willingness-to-pay, best-worst scaling, and current status of quality characteristics in different beef industry marketing sectors

The National Beef Quality Audit (NBQA)-2011 benchmarked the current status of and assessed progress being made toward quality and consistency of U.S. cattle, carcasses, and beef products after the completion of the first NBQA in 1991. Unlike previous NBQA, objectives of the 2011 Phase I study were to determine how each beef market sector defined 7 quality categories, estimate willingness-to-pay (WTP) for the same quality categories by market sector, and establish a best-worst (B/W) scaling for the quality categories. Structured face-to-face interviews were conducted and responses were recorded using dynamic routing software over an 11-mo period (February to December 2011) with decision makers in each of the following beef market sectors: Feeders (n = 59), Packers (n = 26), Food Service, Distribution, and Further Processors (n = 48), Retailers (n = 30), and Government and Allied Industries (n = 47). All respondents participated in a structured interview consisting of WTP and B/W questions that were tied to 7 quality categories and then were asked to "define" each of the 7 categories in terms of what the category meant to them, resulting in completely unbiased results. The 7 quality categories were a) how and where the cattle were raised, b) lean, fat, and bone, c) weight and size, d) cattle genetics, e) visual characteristics, f) food safety, and g) eating satisfaction. Overall, "food safety" and "eating satisfaction" were the categories of greatest and second most importance, respectively, to all beef market sectors except for Feeders. Feeders ranked "how and where the cattle were raised" and "weight and size" as the most important and second most important, respectively. Overall, "how and where the cattle were raised" had the greatest odds of being considered a nonnegotiable requirement before the raw material for each sector would be considered for purchase and was statistically more important (P < 0.05) as a requirement for purchase than all other categories except "food safety." When all market sectors were considered, "eating satisfaction" was shown to generate the greatest average WTP percentage premium (11.1%), but that WTP premium value only differed statistically (P < 0.05) from "weight and size" (8.8%). Most notably, when a sector said that "food safety" was a nonnegotiable requirement, no sector was willing to purchase the product at a discounted price if the "food safety" of the product could not be assured.

National Beef Quality Audit-2011: Harvest-floor assessments of targeted characteristics that affect quality and value of cattle, carcasses, and byproducts

The National Beef Quality Audit-2011 (NBQA-2011) was conducted to assess targeted characteristics on the harvest floor that affect the quality and value of cattle, carcasses, and byproducts. Survey teams evaluated approximately 18,000 cattle/carcasses between May and November 2011 in 8 beef processing facilities. Cattle identification methods were lot visual tags (85.7%), individual visual tags (50.6%), electronic tags (20.1%), metal-clip tags (15.7%), other (5.3%), none (2.5%), and wattles (0.5%). Hide colors or breed types were black (61.1%), red (12.8%), yellow (8.7%), Holstein (5.5%), brown (5.0%), gray (5.0%), white (1.4%), and brindle (1.0%). Brand frequencies were none (55.2%), 1 (40.4%), 2 (4.4%), and 3 or more (0.04%) brands, and brands were located on the butt (35.2%), side (9.0%), and shoulder (2.5%). Hide locations of mud or manure were no mud/manure (49.2%), legs (36.8%), belly (23.7%), side (14.9%), top-line (11.0%), and tail region (13.7%). There were 76.2% of cattle without horns, and the majority of those with horns (71.6%) were between 0 cm and 12.7 cm in length. Permanent incisor numbers were zero (87.3%), 1 (1.4%), 2 (8.0%), 3 (0.9%), 4 (1.9%), 5 (0.3%), 6 (0.2%), 7 (0.1%), and 8 (0.02%). Most carcasses (77.0%) were not bruised, 18.7% had 1 bruise, 3.4% had 2 bruises, 0.6% had 3 bruises, and 0.3% had more than 3 bruises. Bruise locations were loin (50.1%), rib (21.3%), chuck (13.8%), round (7.3%), and brisket/flank/plate (7.5%). Condemnation item and incidence were whole carcass (none recorded), liver (20.9%), lungs (17.3%), tongue (10.0%), viscera (9.3%), and head (7.2%). Compared with the NBQA-2005, the NBQA-2011 had an increased percentage of black-hided cattle (56.3 vs. 61.1%), more cattle with brands (38.7 vs. 44.8%), and more cattle with some form of identification (93.3 vs. 97.5%). In addition, there was a lesser percentage of carcasses with bruising in 2011 (23.0%) than in 2005 (35.2%), as well as a smaller percentage of carcasses with more than 1 bruise (2005 = 9.4% vs. 2011 = 4.2%). Compared with the 2005 audit, a similar percentage of the cattle were deemed 30 mo of age or older using dentition (2005 = 2.7% vs. 2011 = 3.3%). The information from NBQA-2011 helps the beef industry measure progress against previous NBQA assessments and provides a benchmark for future educational and research activities.

National Beef Quality Audit-2011: Survey of instrument grading assessments of beef carcass characteristics

The instrument grading assessments for the 2011 National Beef Quality Audit evaluated seasonal trends of beef carcass quality and yield attributes over the course of the year. One week of instrument grading data, HCW, gender, USDA quality grade (QG), and yield grade (YG) factors, were collected every other month (n = 2,427,074 carcasses) over a 13-mo period (November 2010 through November 2011) from 4 beef processing corporations, encompassing 17 federally inspected beef processing facilities, to create a "snapshot" of carcass quality and yield attributes and trends from carcasses representing approximately 8.5% of the U.S. fed steer and heifer population. Mean yield traits were YG (2.86), HCW (371.3 kg), fat thickness (1.19 cm.), and LM area (88.39 cm(2)). The YG distribution was YG 1, 15.7%; YG 2, 41.0%; YG 3, 33.8%; YG 4, 8.5%; and YG 5, 0.9%. Distribution of HCW was <272.2 kg, 1.6%; 272.2 to 453.6 kg, 95.1%; and ≥453.6 kg, 3.3%. Monthly HCW means were November 2010, 381.3 kg; January 2011, 375.9 kg; March 2011, 366.2 kg; May 2011, 357.9 kg; July 2011, 372.54 kg; September 2011, 376.1 kg; and November 2011, 373.5 kg. The mean fat thickness for each month was November 2010, 1.30 cm; January 2011, 1.22 cm; March 2011, 1.17 cm; May 2011, 1.12 cm; July 2011, 1.19 cm; September 2011, 1.22 cm; and November 2011, 1.22 cm. The overall average marbling score was Small(49). The USDA QG distribution was Prime, 2.7%; Top Choice, 22.9%; Commodity Choice, 38.6%; and Select, 31.5%. Interestingly, from November to May, seasonal decreases (P < 0.001) in HCW and fat thicknesses were accompanied by increases (P < 0.001) in marbling. These data present the opportunity to further investigate the entire array of factors that determine the value of beef. Data sets using the online collection of electronic data will likely be more commonly used when evaluating the U.S. fed steer and heifer population in future studies.

National Beef Quality Audit-2011: In-plant survey of targeted carcass characteristics related to quality, quantity, value, and marketing of fed steers and heifers

The 2011 National Beef Quality Audit (NBQA-2011) assessed the current status of quality and consistency of fed steers and heifers. Beef carcasses (n = 9,802), representing approximately 10% of each production lot in 28 beef processing facilities, were selected randomly for the survey. Carcass evaluation for the cooler assessment of this study revealed the following traits and frequencies: sex classes of steer (63.5%), heifer (36.4%), cow (0.1%), and bullock (0.03%); dark cutters (3.2%); blood splash (0.3%); yellow fat (0.1%); calloused rib eye (0.05%); overall maturities of A (92.8%), B (6.0%), and C or greater (1.2%); estimated breed types of native (88.3%), dairy type (9.9%), and Bos indicus (1.8%); and country of origin of United States (97.7%), Mexico (1.8%), and Canada (0.5%). Certified or marketing program frequencies were age and source verified (10.7%), ≤A(40) (10.0%), Certified Angus Beef (9.3%), Top Choice (4.1%), natural (0.6%), and Non-Hormone-Treated Cattle (0.5%); no organic programs were observed. Mean USDA yield grade (YG) traits were USDA YG (2.9), HCW (374.0 kg), adjusted fat thickness (1.3 cm), LM area (88.8 cm2), and KPH (2.3%). Frequencies of USDA YG distributions were YG 1, 12.4%; YG 2, 41.0%; YG 3, 36.3%; YG 4, 8.6%; and YG 5, 1.6%. Mean USDA quality grade (QG) traits were USDA quality grade (Select(93)), marbling score (Small(40)), overall maturity (A(59)), lean maturity (A(54)), and skeletal maturity (A(62)). Frequencies of USDA QG distributions were Prime, 2.1%; Choice, 58.9%; Select, 32.6%; and Standard or less, 6.3%. Marbling score distribution was Slightly Abundant or greater, 2.3%; Moderate, 5.0%; Modest, 17.3%; Small, 39.7%; Slight, 34.6%; and Traces or less, 1.1%. Carcasses with QG of Select or greater and YG 3 or less represented 85.1% of the sample. This is the fifth benchmark study measuring targeted carcass characteristics, and information from this survey will continue to help drive progress in the beef industry. Results will be used in extension and educational programs as teaching tools to inform beef producers and industry professionals of the current state of the U.S. beef industry.

National Beef Quality Audit-2005: survey of targeted cattle and carcass characteristics related to quality, quantity, and value of fed steers and heifers

The National Beef Quality Audit-2005 assessed the current status of quality and consistency of US fed steers and heifers. Hide colors or breed type were black (56.3%), red (18.6%), Holstein (7.9%), gray (6.0%), yellow (4.9%), brown (3.0%), white (2.3%), and brindle (1.0%). Identification method and frequency were lot visual tags (63.2%), individual visual tags (38.7%), metal-clip tags (11.8%), electronic tags (3.5%), bar-coded tags (0.3%), by other means (2.5%), and without identification (9.7%). Brand frequencies were no (61.3%), 1 (35.1%), and 2 or more (3.6%), and brands were located on the butt (26.5%), side (7.4%), and shoulder (1.2%). There were 22.3% of cattle without horns, and the majority of those with horns (52.2%) were between 2.54 and 12.7 cm in length. Percentages of animals with mud or manure on specific body locations were none (25.8%), legs (61.4%), belly (55.9%), side (22.6%), and top-line (10.0%). Permanent incisor number and occurrence were zero (82.2%), 1 (5.2%), 2 (9.9%), 3 (0.4%), 4 (1.2%), 5 (0.1%), 6 (0.3%), 7 (0.0%), and 8 (0.7%). Most carcasses (64.8%) were not bruised, 25.8% had one bruise, and 9.4% had multiple bruises. Bruise location and incidence were round (10.6%), loin (32.6%), rib (19.5%), chuck (27.0%), and brisket, flank, and plate (10.3%). Condemnation item and incidence were liver (24.7%), lungs (11.5%), tripe (11.6%), heads (6.0%), tongues (9.7%), and carcasses (0.0%). Carcass evaluation revealed these traits and frequencies: steer (63.7%), heifer (36.2%), bullock (0.05%), and cow (0.04%) sex classes; dark-cutters (1.9%); A (97.1%), B (1.7%), and C or older (1.2%) overall maturities; and native (90.9%), dairy-type (8.3%), and Bos indicus (0.8%) estimated breed types. Mean USDA yield grade (YG) traits were USDA YG (2.9), HCW (359.9 kg), adjusted fat thickness (1.3 cm), LM area (86.4 cm(2)), and KPH (2.3%). The USDA YG were YG 1 (16.5%), YG 2 (36.3%), YG 3 (33.1%), YG 4 (11.8%), and YG 5 (2.3%). Mean USDA quality grade traits were USDA quality grade (Select(90)), marbling score (Small(32)), overall maturity (A(64)), lean maturity (A(57)), and skeletal maturity (A(68)). Marbling score distribution was Slightly Abundant or greater (2.7%), Moderate (4.3%), Modest (14.4%), Small (34.5%), Slight (41.2%), and Traces or less (2.9%). This information helps the beef industry measure progress and provides a benchmark for future educational and research activities.

Effect of xylitol on adhesion of Salmonella Typhimurium and Escherichia coli O157:H7 to beef carcass surfaces

Effects of 10% xylitol (a five-carbon sugar alcohol) on adhesion of Escherichia coli O157:H7 and Salmonella Typhimurium to meat surfaces were examined with three approaches. First, beef outside round was inoculated with rifampin-resistant E. coli O157:H7 and Salmonella Typhimurium dispersed in xylitol or peptone solution. Samples were rinsed with water or not rinsed in a 2 x 2 factorial arrangement. No interaction existed between inoculum and rinsing treatments (P > 0.84). Incubation in xylitol had minimal impact on pathogen adhesion (P > 0.76); however, rinsing reduced pathogen cell counts (P < 0.01). Second, meat samples were treated with water, xylitol, or no rinse; inoculated with pathogens dispersed in peptone solution (8.6 log CFU/ml for each pathogen); and then treated with water, xylitol, or no rinse in a 3 x 3 factorial arrangement. No interactions were observed (P > 0.50). Postinoculation rinsing reduced pathogen loads (P < 0.01) without difference between water and xylitol (P > 0.64). Third, carcass surfaces inoculated with pathogens (5.5 log CFU/cm2) were treated with 35 degrees C water wash, 2.5% L-lactic acid spray, 10% xylitol spray, lactic acid plus xylitol, or hot water plus xylitol. Lactic acid treatments reduced Salmonella Typhimurium at 0 h (P < 0.01) and 24 h (P < 0.02). Hot water treatments tended to reduce Salmonella Typhimurium at 0 h (P < 0.07). Xylitol did not reduce pathogens (P > 0.62) or increase effectiveness of other treatments. Xylitol does not influence E. coli O157:H7 and Salmonella Typhimurium adhesion to meat surfaces.

Influence of animal temperament and stress responsiveness on the carcass quality and beef tenderness of feedlot cattle

Three groups of steers (A, B, C) were used to study the effect of temperament (Calm, Intermediate, and Excitable) on meat quality. Temperament was based on exit velocity, pen scores, and chute scores. Temperament traits were consistent across evaluations, and values decreased (P<0.05) in magnitude over time. Increasing excitability was associated with higher (P<0.05) serum cortisol concentrations. Carcasses from cattle with calm temperaments had higher (P<0.05) 0.5h postmortem pH values than those from Intermediate and Excitable cattle (0.1 and 0.2 units, respectively). Group C Excitable steers had higher (P<0.05) WBS values than the calmer Group C steers. This trend was observed in Group A steers, although the values were not statistically different. Correlations were highest between temperament values and tenderness after 21d. Temperament influences tenderness, although the mechanism is not clear.

National Beef Quality Audit-2000: survey of targeted cattle and carcass characteristics related to quality, quantity, and value of fed steers and heifers

The National Beef Quality Audit-2000 was conducted to assess the current status ofthe quality and consistency of U.S. fed steers and heifers. Between May and November 2000, survey teams assessed hide condition (n = 43,415 cattle for color, brands, mud/manure), bruises (n = 43,595 carcasses), offal and carcass condemnation (n = 8,588 cattle), and carcass quality and yield information (n = 9,396 carcasses) in 30 U.S. beef packing plants. Hide colors were black (45.1%), red (31.0%), yellow (8.0%), Holstein (5.7%), gray (4.0%), white (3.2%), brown (1.7%), and brindle (1.3%). Brand frequencies were no (49.3%), one (46.2%), and two or more (4.4%), and brands were located on the butt (36.3%), side (13.7%), and shoulder (3.6%). Most cattle had no (18.0%) or a small amount (55.8%) of mud/manure on their hides, and they had no (77.3%) horns. Most carcasses (53.3%) were not bruised, 30.9% had one bruise, and 15.8% had multiple bruises. Bruise location and incidence were round (14.9%), loin (25.9%), rib (19.4%), chuck (28.2%), and brisket, flank, and plate (11.6%). Condemnation item and incidence were liver (30.3%), lungs (13.8%), tripe (11.6%), heads (6.2%), tongues (7.0%), and carcasses (0.1%). Carcass evaluation revealed these traits and frequencies: steer (67.9%), heifer (31.8%), and bullock (0.3%) sex-classes; dark-cutters (2.3%); A (96.6%), B (2.5%), and C or older (0.9%) overall maturities; and native (90.1%), dairy-type (6.9%), and Bos indicus (3.0%) breed-types. Mean USDA yield grade traits were USDA yield grade (3.0), carcass weight (356.9 kg), adjusted fat thickness (1.2 cm), longissimus muscle area (84.5 cm2), and kidney, pelvic, and heart fat (2.4%). USDA yield grades were Yield Grade 1 (12.2%), Yield Grade 2 (37.4%), Yield Grade 3 (38.6%), Yield Grade 4 (10.4%), and Yield Grade 5 (1.3%). Mean USDA quality grade traits were USDA quality grade (Select85), marbling score (Small23), overall maturity (A66), lean maturity (A65), and skeletal maturity (A67). Marbling score distribution was Slightly Abundant or higher (2.3%), Moderate (4.8%), Modest (13.1%), Small (33.3%), Slight (43.3%), and Traces (3.4%). USDA quality grades were Prime (2.0%), Choice (49.1%), Select (42.3%), Standard (5.6%), and Commercial, Utility, Cutter, and Canner (0.9%). This information will help the beef industry measure progress compared to the past two surveys and will provide a benchmark for future educational and research activities.

National Beef Tenderness Survey-1998

Fifty-six retail stores representing 15 retail chains and 14 foodservice facilities in eight U.S. cities were sampled to determine the tenderness of beef steaks at retail and foodservice levels based on Warner-Bratzler shear (WBS) values and consumer evaluation panels. Retail consumer panels were conducted at five universities. Each retail and foodservice steak was evaluated using 10-point scales. Steaks were divided into the following quality groups for statistical analysis: Prime, Top Choice, Choice, Select, and Lean or No Roll. Quality group had no effect on WBS values of retail clod, chuck roll, top round, bottom round, eye of round, top loin, top sirloin, or ribeye steaks but did (P < .05) affect values for the T-bone/porterhouse. The percentages of retail top round, eye of round, and bottom round steaks with a WBS force > 3.9 kg were 39.6, 55.9, and 68.0, respectively. Foodservice ribeye, top loin, and top sirloin steaks had WBS values less than 3.4 kg for all quality groups, with Prime ribeye steaks having lower (P < .05) WBS values than ribeyes from the other quality groups. With the exception of the retail ribeye steak, quality group did not affect consumer sensory ratings of retail and foodservice steaks. Average postfabrication aging times were 32 d for foodservice subprimals and 19 d for retail cut subprimals. These data indicate that improvements in the tenderness of retail cuts from the round are needed. Finally, quality group had little or no effect on consumer sensory evaluations and WBS values of retail and foodservice steaks used in this study.

Urethral collagen morphologic characteristics among women with genuine stress incontinence

OBJECTIVE

This was a study of the morphologic characteristics of urethral collagen in women with stress incontinence and continent control women.

STUDY DESIGN

Urethral needle biopsy specimens were obtained from 31 women. Fifteen women were continent, and the other 16 had undergone full urogynecologic assessment for symptoms of urinary incontinence. Biopsy specimens were assessed under electron microscopy. Mean collagen fibril diameter was measured and collagen morphologic characteristics were assessed.

RESULTS

The biopsy specimens from 30 women were included in the analysis. Collagen fibril diameter did not vary with continence status, the presence of pelvic organ prolapse, age, race or hormonal status. Alterations in collagen fibril morphologic characteristics were evident in the biopsy specimens from nine patients with incontinence. The alterations in collagen morphologic characteristics fell into three patterns, which for convenience were referred to as the obscured pattern, the dense pattern, and the degenerative pattern.

CONCLUSION

Altered collagen morphologic characteristics are found in some patients with stress incontinence, and possible causes for those alterations are suggested by their appearances.

Female pelvic organ prolapse: a comparison of triphasic dynamic MR imaging and triphasic fluoroscopic cystocolpoproctography

OBJECTIVE

This study compared dynamic MR imaging with fluoroscopic cystocolpoproctography for the detection and measurement of prolapse of pelvic organs.

SUBJECTS AND METHODS

Ten patients underwent triphasic dynamic MR imaging and triphasic fluoroscopic cystocolpoproctography with identical amounts of contrast material to opacify the bladder, vagina, and rectum. The dynamic MR imaging procedure included cine-loop presentation. Each examination was analyzed to determine the presence and extent of prolapse of pelvic organs based on specific measurements.

RESULTS

Both dynamic MR imaging and fluoroscopic cystocolpoproctography revealed 10 rectoceles (mean extents, 2.85 and 2.45 cm, respectively). Nine cystoceles were revealed by both dynamic MR imaging (mean extent, 4.05 cm) and fluoroscopy (mean extent, 4.55 cm). Seven enteroceles were revealed, one of which was initially not seen on dynamic MR imaging. Two sigmoidoceles were revealed, one of which was not seen on fluoroscopy. The mean extent of the enteroceles and sigmoidoceles on dynamic MR imaging was 3.50 cm, and the mean extent on fluoroscopy was 4.25 cm. Nine of the 10 patients were able to defecate in the supine position on the MR imaging table. Patients were divided equally in their preference for dynamic MR imaging or fluoroscopic cystocolpoproctography.

CONCLUSION

Triphasic dynamic MR imaging and triphasic fluoroscopic cystocolpoproctograpy show similar detection rates for prolapse of pelvic organs. Although dynamic MR imaging underestimates the extent of cystoceles and enteroceles, it has the advantage of revealing all pelvic organs and the pelvic floor musculature in a multiplanar cine-loop presentation.

Abdominal sacrospinous ligament colposuspension

BACKGROUND

When an abdominal approach is chosen for repair of pelvic prolapse, a paravaginal repair is often used to correct lateral cystoceles and a retropubic urethropexy to correct genuine stress incontinence. If concomitant vaginal vault prolapse exists, an approach for vaginal vault support, which can be done through the space of Retzius, would be beneficial. We describe an abdominal approach to the sacrospinous ligament.

TECHNIQUE

The space of Retzius is accessed and important anatomic landmarks, including the obturator canal and neurovascular bundle, paravaginal veins, bladder, and ischial spine, are identified. The sacrospinous ligament complex is palpated and exposed. The superior posterolateral vaginal wall is then fixed to the complex. Often a bilateral repair is possible.

EXPERIENCE

Fifty-five women at two centers had abdominal sacrospinous ligament colpopexies for vaginal vault prolapse. All had other repairs for pelvic organ prolapse. No follow-up operations were needed for recurrent vault prolapse, over an average of 23 months follow-up.

CONCLUSION

An abdominal approach to the sacrospinous ligament complex can be used, providing pelvic reconstruction surgeons with an alternative technique for vaginal vault support when other space-of-Retzius procedures are required.

Female pelvic organ prolapse: diagnostic contribution of dynamic cystoproctography and comparison with physical examination

OBJECTIVE

The aim of this study was to assess the contribution of dynamic cystoproctography to the evaluation of female pelvic organ prolapse and to compare this contribution with that of physical examination.

MATERIALS AND METHODS

The presence or absence of rectocele, enterocele, sigmoidocele, and cystocele on physical examination and on cystoproctography was retrospectively analyzed in 170 consecutive patients. For each of these diagnostic methods, organ prolapse was graded as small, moderate, or large on the basis of specific, defined measurements.

RESULTS

A rectocele was detected by proctography in 155 patients (91%); 119 (77%) of these rectoceles were also found on physical examination. Barium trapping at proctography was related to rectocele size. Proctography showed an enterocele in 47 patients (28%); 24 (51%) of these enteroceles were also found on physical examination. Physical examination also found 44 enteroceles that could not be corroborated radiologically. At proctography, the enteroceles were relatively large, extending an average of 7.3 cm below the vaginal apex. Eight patients had sigmoidoceles, none of which were found on physical examination. A cystocele was shown by cystoproctography in 159 patients (94%); 132 (83%) of these cystoceles were also found on physical examination.

CONCLUSION

The correlation between finding prolapsed pelvic organs on dynamic cystoproctography and finding them on physical examination varies. Most radiographically detected rectoceles and cystoceles are found on physical examination, whereas the correlation for enteroceles and sigmoidoceles is poor. Dynamic cystoproctography provides direct visualization and quantification of female pelvic organ prolapse, information that usually can only be inferred by physical examination.

Association of compartment defects in pelvic floor dysfunction

OBJECTIVE

Dynamic cystoproctography was used to determine the frequency of associated urinary, genital, and anorectal abnormalities in women with pelvic floor dysfunction.

SUBJECTS AND METHODS

We categorized, by pelvic floor compartments, the symptoms at presentation of 100 consecutive female patients who had been referred for dynamic cystoproctography. We then analyzed the compartment defects seen on dynamic cystoproctography relative to those detected on clinical presentation.

RESULTS

Of the 20 patients with symptoms of anterior compartment (urinary) defect, dynamic cystoproctography revealed that 45% had vaginal vault prolapse of more than 50% and that 90% had rectoceles. Of the 45 patients with symptoms of middle compartment (genital) defect, dynamic cystoproctography revealed that 91% had cystoceles, 56% had a hypermobile bladder neck, 82% had rectoceles, 58% had enteroceles, 11% had sigmoidoceles, 20% had rectoanal intussusception, and 16% had anal incontinence. Of the 17 patients with symptoms of posterior compartment (anorectal) defect, dynamic cystoproctography showed that 71% had cystoceles, 65% had a hypermobile bladder neck, and 35% had vaginal vault prolapse of more than 50%. Of the 18 patients with symptoms of defects from a combination of compartments, dynamic cystoproctography revealed that 89% had cystoceles, 56% had a hypermobile bladder neck, 39% had vaginal vault prolapse exceeding 50%, 100% had rectoceles (of which 45% were large), 6% had enteroceles, 6% had sigmoidoceles, 22% had rectoanal intussusception, and 6% had anal incontinence.

CONCLUSION

Although patients may present with symptoms that involve only one compartment, a multicompartment prolapse is usually revealed on dynamic cystoproctography. Of the patients with pelvic floor dysfunction, 95% had abnormalities in all three compartments.

Histologic analysis of needle biopsy of urethral sphincter from women with normal and stress incontinence with comparison of electromyographic findings

OBJECTIVE

Our goal was to compare urethral sphincter biopsy and needle electromyography between women who had genuine stress incontinence and those who did not.

STUDY DESIGN

Seventeen continent women and 10 women with stress incontinence had urethral sphincter needle electromyography and urethral biopsy specimens blindly processed for light and electron microscopy.

RESULTS

The continent group had greater skeletal muscle content and percentage in each muscle fascicle and each urethral sphincter. The group with genuine stress incontinence had higher connective tissue content. All urethral skeletal muscle was type 1. The smooth muscle was "multiunit" type and was morphologically indistinguishable between the 2 groups. On electromyography, patients with genuine stress incontinence had significantly more fibrillation potentials, fewer motor unit action potentials, a higher percentage of polyphasia, and less maximum voluntary electrical activity than control subjects.

CONCLUSIONS

Women with stress incontinence differ from continent women in skeletal muscle volume, amount of fibrosis, and electromyographic parameters; these differences support a neurogenic contribution to genuine stress incontinence. Urethral sphincter has only type 1 skeletal muscle and "multiunit" type smooth muscle.

National Beef Quality Audit-1995: survey of producer-related defects and carcass quality and quantity attributes

The National Beef Quality Audit-1995 was conducted to evaluate the progress of the beef industry since the time of the National Beef Quality Audit-1991 in improving quality and consistency of beef. Nine plants were assigned for auditing to Colorado State University, Oklahoma State University, and Texas A&M University. Personnel from each institution visited three of their nine plants twice, once in the spring/summer and once in the fall/winter. Data were collected on 50% of each lot on the slaughter floor and 10% in the cooler during a single day's production (one or two shifts, as appropriate). Of the cattle audited on the slaughter floor, 47.7% had no brands, 3.0% had a shoulder brand, 16.8% had a side brand, 38.7% had a butt brand, and 6.2% had brands in multiple locations. Data revealed that 51.6% of the carcasses had no bruises, 30.9% had one bruise, 12.8% had two bruises, 3.7% had three bruises, .9% had four bruises, and .1% had more than four bruises. In addition, 7.2% of the bruises evaluated were located on the round, 41.1% were on the loin, 20.8% on the rib, and 30.8% on the chuck. Livers, lungs, tripe, heads, tongues, and whole carcasses were condemned at rates of 22.2, 5.0, 11.0, .9, 3.8, and .1%, respectively. Mean USDA yield grade and quality grade traits were as follows: USDA yield grade, 2.8; carcass weight, 338.4 kg; adjusted fat thickness, 1.2 cm; longissimus muscle area, 81.9 cm2; kidney, pelvic, and heart fat, 2.1%; USDA quality grade, High Select; overall maturity, A60; and marbling score, Small-minus.

Live animal performance, carcass traits, and meat palatability of calf- and yearling-fed cloned steers

Two groups of Brangus steers produced by nuclear transplantation cloning were used in parallel studies investigating the impact of calf- and yearling-feeding. The first group (n = 8) were fed as calves (CF; n = 4) or yearlings (YF; n = 4) to a constant age end point of 16 mo. The second group (n = 10) were fed as calves (CF; n = 5) or yearlings (YF; n = 5) to a constant live weight end point (530 kg). When slaughtered at the same age, CF and YF steers did not differ (P > .05) in feedlot ADG, but the CF steers were heavier and had higher dressing percentages, numeric yield grades, and quality grades (P < .05). Top loin steaks from the groups of steers did not differ (P > .05) in palatability traits. When fed to a constant live weight, the YF steers gained more rapidly (P < .05) and had lower (P < .05) numeric yield grades than did CF steers. Again CF steers had higher (P < .05) dressing percentages. There was no difference (P > .05) between the treatments in carcass quality grade or meat palatability characteristics. Thus, when finished to a constant weight end point, YF steers gained more rapidly, with no adverse effects on carcass quality grade or palatability traits; however, CF steers consistently produced higher dressing percentages, largely due to greater external fatness.

Ostrich slaughter and fabrication: 1. Slaughter yields of carcasses and effects of electrical stimulation on post-mortem pH

A commercial ostrich slaughter protocol was developed. Ostriches (n = 7 males and n = 7 females) averaged 95.54 kg live weight and yielded 55.91-kg carcasses. By-product yields were measured. The most significant by-products by weight were full viscera (8.29 kg), hide (6.71 kg), full gizzard and crop (5.80 kg), and abdominal fat (4.11 kg). Sex had no effect on slaughter yields. Post-mortem temperature declines were measured on five separate muscles and showed that chilling for 24 h was sufficient to adequately chill the deep muscle temperature to under 4 C. The effect of electrical stimulation on post-mortem pH decline also was investigated and had no effect.

Unilobed and bilobed skin flaps. Detailed surgical technique for plantar lesions

The authors provide a detailed description of effective surgical techniques for painful plantar skin lesions of the foot that are not amenable to simple excisional procedures. Modified unilobed and bilobed skin flaps are described, emphasizing step-by-step design and procedure performance. These advanced techniques offer numerous advantages over other excisional and flap methods, such as being reproducible and yielding predictable results.

Predicting intramuscular fat in beef longissimus muscle from speed of sound

The ultrasonic A-mode method was investigated for intramuscular fat measurement of beef. Cubes of meat samples that had different marbling scores were used as specimens. Ultrasonic speed decreased with increasing fat concentration. The correlation coefficient was -.82 (P < .05). Conversely, the correlation coefficient between visual marbling score and fat concentration was .70 (P < .05). Quantitatively, from the first derivative of a nonlinear function, it was concluded that the speed decreased at a rate of 2.69 m/(s-% fat) as a function of intramuscular fat. A nonlinear regression model to predict intramuscular fat content in beef was developed as follows: percentage of fat concentration = 7132.1574-9.1222 x (speed) + 2.91803 x 10(-3) x (speed)2 (R2 = .81). The nonlinear model was capable of predicting intramuscular fat concentration with 90% accuracy (> 8% fat) and 76.4% accuracy (< 8% fat), respectively (P < .001).

National Beef Quality Audit: survey of producer-related defects and carcass quality and quantity attributes

To assess the then-current population of fed beef cattle for quality defects, the federally inspected beef steer and heifer slaughter in 28 packing plants was surveyed during a 3-mo period (October to December 1991). Data were collected over the course of 1 d of production at chain speed. Carcasses were selected randomly to include 50 and 10% of each lot on the slaughter floor and in the cooler, respectively. Slaughter floor defects evaluated were brand location and size, degree of bruising, grubs and injection sites, condemnation of offal, and the presence of mud and horns. USDA grade factors and other data were collected in the cooler. The distribution of hot-iron brand scars on the hide for the sample was as follows: cattle with no brand, 55.0%; cattle with butt brands, 29.9%; cattle with side brands, 13.8%; and cattle with shoulder brands, .8%. In addition, 83.3, 85.6, 76.6, 97.3, 99.9, and 99.8% of the carcasses had no superficial bruising in the chuck, rib, loin, round, brisket, and other areas of the carcass, respectively. The incidence of viscera condemnations for livers, lungs, tripe, and total viscera were 19.2, 5.1, 3.5, and .1%, respectively. Means for the carcass traits were as follows: USDA yield grade, 3.1; hot carcass weight, 344.7 kg; adjusted fat thickness, 1.5 cm; longissimus muscle area, 83.4 cm2; kidney, pelvic, and heart fat, 2.2%; USDA quality grade, high Select; marbling score, Small-minus; and overall maturity, A69.

Using calcium chloride injection to improve tenderness of beef from mature cows

The objective of this investigation was to determine the effect of calcium chloride (CaCl2) injection on Warner-Bratzler shear force (WBS), sensory panel ratings, and collagen traits of mature cow beef. Within 30 min of exsanguination, subprimals (top round, TR; top sirloin, TS; strip loin, SL) from alternate sides of the carcass were injected with a .3 M CaCl2 solution (10% of the subprimal weight) and aged for 1, 7, or 14 d. The corresponding cold-boned cuts of the other side served as a control. Injecting CaCl2 eliminated the requirement for extended postmortem storage, as indicated by d 1 WBS. During the 14-d aging period, WBS of noninjected cuts decreased by 2.59 kg, whereas WBS of CaCl2-injected samples decreased by only .35 kg. Compared with control cuts, CaCl2 injection improved (P less than .05) d-14 WBS of steaks from SL, TS, and TR by 41.1, 40.1, and 15.3%, respectively. Additionally, CaCl2-injected subprimals exhibited higher (P less than .05) sensory panel tenderness ratings, lower (P less than .05) amounts of detectable connective tissue, and shorter (P less than .05) sarcomere lengths. No differences (P greater than .05) were observed in any quantitative collagen traits between CaCl2-injected and control cuts. These results indicate that CaCl2 injection improved ultimate tenderness and sensory ratings of meat from mature cow cuts.

Microbiological Effects of Acid Decontamination of Beef Carcasses at Various Locations in Processing

Hot (55°C), dilute (1% v/v) lactic acid was sprayed on beef carcass surfaces immediately after dehiding, after evisceration (immediately before chilling), or at both locations. Surface samples of carcasses were examined for total aerobic plate counts (APCs) and for the presence of Salmonella and Listeria . APCs of treated beef carcasses were lower (P<0.05) than those of control carcasses. APCs were determined both at slaughter day 0 (immediately after carcasses enter the chill room) and after 72 h postmortem. At day 0, reductions in log₁₀ APC by more than 90% occurred when carcasses were treated with lactic acid after evisceration or both after dehiding and after evisceration. The effect of lactic acid decontamination was greatest on carcasses treated with lactic acid both after dehiding and after evisceration. No further reductions in APCs of carcasses were observed on samples taken 72 h postmortem. No difference in color between control and acid-treated carcasses was observed. All samples tested for the presence of Salmonella were negative. Listeria was detected in three samples from control carcasses only. Samples obtained from strip loins of acid-treated or control carcasses did not show any consistent pattern of differences in microbiological counts. Additional data collected from carcasses sprayed with lactic acid in three different sized slaughter plants showed that irrespective of differences in size of slaughter facility, mean APCs of acid-treated carcasses were significantly (P<0.05) lower than those of control carcasses.

National beef tenderness survey

To determine the average tenderness and sensory ratings of beef subprimal cuts sold in retail cases across the United States, retail cuts were purchased through typical retail outlets in 14 metropolitan cities and transported to Texas A&M University for sensory and Warner-Bratzler shear analysis. The overall mean shear force for all cuts was 3.65 kg, and the mean shear force values for chuck, rib, loin, and round cuts were 3.72, 3.36, 3.17, and 4.31 kg, respectively. No difference (P greater than .05) in tenderness was detected among the cuts from the rib. Mean palatability ratings and shear force values of top loin steaks were similar to those of rib cuts. Top sirloin steaks were tougher (P less than .05) and received the lowest sensory ratings compared with other loin cuts. Approximately two to three times as many round and chuck steaks had shear force values in excess of 4.6 kg compared with their roast counterparts. In all cases, roasts tended to be more tender than steaks from the same subprimal source. USDA Choice chuck retail cuts, compared to Select and No-roll chuck cuts, had approximately 10% fewer cuts with shear force values in excess of 4.0 kg. More work is needed to improve meat tenderness, primarily for retail cuts from the round and chuck primals. Future research must investigate the interaction of antemortem and postmortem factors associated with variation in beef tenderness.

National beef market basket survey

Beef retail cases in supermarkets in 12 cities across the United States were surveyed for fat thickness measurements, cut representation, package weights and counts, and case space allocation. Randomly selected retail cuts were purchased and transported to Texas A&M University, where they were dissected into separable components. Samples of ground beef were obtained for chemical analysis. Over 42% of the beef retail cuts had no external fat, and approximately 75% of all cuts were boneless. The overall mean fat thickness for all retail cuts in the beef case was .31 cm, and the overall mean fat thickness for steaks and roasts from the major primals - chuck, rib, loin, and round - was .38 cm. The average percentage of separable lean was 79.0%, separable fat was 12.3%, and bone and connective tissue was 8.7%. Retail cuts had more than twice as much separable seam fat as separable external fat. Beef steaks and roasts had 27.4% less separable fat than values from USDA Agriculture Handbook 8-13. Of the ground beef surveyed, 37% was regular, 40% was lean, and over 22% was extra lean. Retail ground beef had approximately 10% less fat than values from USDA Agriculture Handbook 8-13.

Giant keratoacanthoma of the plantar foot: a report of two cases

KA develops from a rapidly growing, firm, smooth nodule into a mature dome-shaped lesion with a central core filled with keratin that usually degenerates into an involuting keratinous mass. KAs must be differentiated from squamous cell carcinoma. Classically, KA is a benign tumor that is self-limiting. However, there is controversy concerning the aggressiveness of the tumor. Some authors believe there is no way to determine the aggressiveness of the tumors and they should be classified as low grade squamous cell carcinomas (3). Others feel that the risk of malignant transformation is not a serious consideration but misdiagnosis is, due to the histopathologic similarities (31, 33). Overall, the literature shows that solitary and giant lesions should be excised. Excisional biopsy yields a more cosmetic scar and increases the chance for an accurate biopsy diagnosis. Multiple and multinodular lesions should be excised if they have the potential for causing a mutilating deformity but are otherwise treated systematically. If a solitary or multiple lesion which is left to spontaneously resolve shows signs of aggressiveness, even with a biopsy indicating that it is a KA, it should be immediately excised. Solitary and giant KA are usually not considered to be located on the palms and soles. However, with the cases presented here, there are now a total of 4 cases in the literature. Therefore, KA should be included in the differential diagnosis when dealing with rapidly growing tumors on the plantar aspect of the foot.