Targeted intradermal delivery of alpha-arbutin-loaded dissolving polymeric microneedles visualized by three-dimensional Orbitrap secondary ion mass spectrometry (3D OrbiSIMS)

Hyperpigmentation, a prevalent dermatological condition characterized by melanin overproduction, poses treatment challenges due to the hydrophilicity of alpha-arbutin, a widely utilized tyrosinase inhibitor. This study investigates the efficacy of dissolving microneedles (DMNs) in augmenting skin permeation for alpha-arbutin delivery to the targeted epidermal site. Porcine full-thickness skin was employed in a 24-hour Franz cell study, commencing with the assessment of commercial alpha-arbutin-containing products. Solid steel microneedles (CMNs) from Dermapen® were utilized as both pre- and post-treatment modalities to evaluate the influence of different applications on alpha-arbutin delivery. Additionally, alpha-arbutin-loaded polyvinylpyrrolidone-co-vinyl acetate (PVPVA) DMNs, containing 2 % w/w alpha-arbutin, were fabricated and examined for their permeation-enhancing capabilities. HPLC analysis and 3D Orbitrap Secondary Ion Mass Spectrometry (OrbiSIMS) were employed to quantify and visualize alpha-arbutin in various Franz cell components. Results indicate that alpha-arbutin permeation to the skin was restricted (less than 1 %) without microneedle application and significantly increased by 6-fold (4-5 %) with post-treatment CMNs and DMNs, but not with pre-treatment CMNs. Notably, DMNs exhibited a more sustainable and robust capacity than post-treatment CMNs. OrbiSIMS imaging analysis revealed that DMNs visually enhance skin permeation of alpha-arbutin by delivering the compound to the basal layer of the targeted skin location. Overall, this study underscores the potential of DMNs as a promising delivery system for promoting targeted intradermal delivery of alpha-arbutin, providing a comprehensive exploration of various methodologies to identify innovative and improved microneedle approaches for alpha-arbutin permeation.

Sustained Release of Dexamethasone from 3D-Printed Scaffolds Modulates Macrophage Activation and Enhances Osteogenic Differentiation

Enhancing osteogenesis via modulating immune cells is emerging as a new approach to address the current challenges in repairing bone defects and fractures. However, much remains unknown about the crosstalk between immune cells and osteolineage cells during bone formation. Moreover, biomaterial scaffold-based approaches to effectively modulate this crosstalk to favor bone healing are also lacking. This study is the first to investigate the interactions between macrophages and mesenchymal stem cells (MSCs) in co-cultures with the sustained release of an anti-inflammatory and pro-osteogenesis drug (dexamethasone) from three-dimensional (3D)-printed scaffolds. We successfully achieved the sustained release of dexamethasone from polycaprolactone (PCL) by adding the excipient-sucrose acetate isobutyrate (SAIB). Dexamethasone was released over 35 days in the 17-163 nM range. The osteogenic differentiation of MSCs was enhanced by M1 macrophages at early time points. The late-stage mineralization was dominated by dexamethasone, with little contribution from the macrophages. Besides confirming BMP-2 whose secretion was promoted by both dexamethasone and M1 macrophages as a soluble mediator for enhanced osteogenesis, IL-6 was found to be a possible new soluble factor that mediated osteogenesis in macrophage-MSC co-cultures. The phenotype switching from M1 to M2 was drastically enhanced by the scaffold-released dexamethasone but only marginally by the co-cultured MSCs. Our results offer new insight into macrophage-MSC crosstalk and demonstrate the potential of using drug-release scaffolds to both modulate inflammation and enhance bone regeneration.

Design, Synthesis, and Biological Evaluation of Novel Hybrids Containing Dihydrochalcone as Tyrosinase Inhibitors to Treat Skin Hyperpigmentation

Excessive melanin deposition may lead to a series of skin disorders. The production of melanin is carried out by melanocytes, in which the enzyme tyrosinase performs a key role. In this work, we identified a series of novel tyrosinase inhibitor hybrids with a dihydrochalcone skeleton and resorcinol structure, which can inhibit tyrosinase activity and reduce the melanin content in the skin. Compound 11c possessed the most potent activity against tyrosinase, showing IC₅₀ values at nanomolar concentration ranges, along with significant antioxidant activity and low cytotoxicity. Furthermore, in vitro permeation tests, supported by HPLC analysis and 3D OrbiSIMS imaging visualization, revealed the excellent permeation of 11c. More importantly, compound 11c reduced the melanin content on UV-induced skin pigmentation in a guinea pig model in vivo. These results suggest that compound 11c may serve as a promising potent tyrosinase inhibitor for the development of a potential therapy to treat skin hyperpigmentation.

MODL-34. DECELLULARIZATION OF HUMAN AUTOPSY BRAIN TISSUE TO GENERATE A 3D EXTRACELLULAR MATRIX FOR MEDULLOBLASTOMA AND ATYPICAL TERATOID/RHABDOID TUMOUR MODELLING

INTRODUCTION

Childhood medulloblastoma (MB) and atypical teratoid/rhabdoid tumours (AT/RT) are malignant brain tumours occurring in the posterior fossa, for which prognoses remains particularly poor for the MB Group 3 subtype characterised by amplification of the Myc oncogene and for AT/RT in general. Current in vitro models for these neoplasms rely on non-coated plastic, various hydrogels, or animal-derived extracellular matrix (ECM), which fail to recapitulate the physiological environment from which the cells are derived from.

METHODS

We have developed a method to decellularize ex vivo human brain tissue from different anatomical locations for the use in 3D in vitro models. Human cerebellar brain tissue was harvested from autopsy brain and sectioned into small cubes before bathing in a sodium dodecyl sulfate/phosphate-buffered saline mixture for several days, before washing and lyophilising.

RESULTS

The optimised method for generation of decellularized human brain ECM successfully removes nuclei as confirmed by histological staining and DNA quantification (DNA reduction of ≥ 60%). Orbitrap-Secondary Ion Mass Spectrometry analysis confirmed the retention of the ECM components laminin (C9H11N3O2Na+), fibronectin (C9H14N4O2Na+ and C20H33N7O5Na+) and collagen (C4H5N2O2+), with a reduction in cell membrane lipid components (glycerophosphocholine, C9H19NPO4+; phosphocholine, C5H15NPO4+; and choline, C5H14NO+) relative to control tissue, with a < 2 ppm accuracy, which was further corroborated by glycosaminoglycan and collagen assays. Multiple molecular subtype-specific AT/RT and MB cell lines have been successfully grown on decellularized cerebellar-ECM/PEGDA hydrogel, showing no reduction in metabolic viability using PrestoBlue and Cell Titer Glo assays.

CONCLUSIONS

This methodology offers an innovative human-only high-throughput 3D drug screening model, whereby patient-derived MB or AT/RT cells are co-cultured with healthy human cerebellar astrocytes upon decellularized cerebellar ECM, which we term ‘Tumoursphere Matrices’.

Microneedle-Mediated Permeation Enhancement of Chlorhexidine Digluconate: Mechanistic Insights Through Imaging Mass Spectrometry

PURPOSE

Chlorhexidine digluconate (CHG) is a first-line antiseptic agent typically applied to the skin as a topical solution prior to surgery due to its efficacy and safety profile. However, the physiochemical properties of CHG limits its cutaneous permeation, preventing it from reaching potentially pathogenic bacteria residing within deeper skin layers. Thus, the utility of a solid oscillating microneedle system, Dermapen®, and a CHG-hydroxyethylcellulose (HEC) gel were investigated to improve the intradermal delivery of CHG.

METHODS

Permeation of CHG from the commercial product, Hibiscrub®, and HEC-CHG gels (containing 1% or 4% CHG w/w) was assessed in intact skin, or skin that had been pre-treated with microneedles of different array numbers, using an Franz diffusion cells and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS).

RESULTS

Gels containing 1% and 4% CHG resulted in significantly increased depth permeation of CHG compared to Hibiscrub® (4% w/v CHG) when applied to microneedle pre-treated skin, with the effect being more significant with the higher array number. ToF-SIMS analysis indicated that the depth of dermal penetration achieved was sufficient to reach the skin strata that typically harbours pathogenic bacteria, which is currently inaccessible by Hibiscrub®, and showed potential lateral diffusion within the viable epidermis.

CONCLUSIONS

This study indicates that HEC-CHG gels applied to microneedle pre-treated skin may be a viable strategy to improve the permeation CHG into the skin. Such enhanced intradermal delivery may be of significant clinical utility for improved skin antisepsis in those at risk of a skin or soft tissue infection following surgical intervention.

The use of nanovibration to discover specific and potent bioactive metabolites that stimulate osteogenic differentiation in mesenchymal stem cells

Bioactive metabolites have wide-ranging biological activities and are a potential source of future research and therapeutic tools. Here, we use nanovibrational stimulation to induce osteogenic differentiation of mesenchymal stem cells, in the absence of off-target, nonosteogenic differentiation. We show that this differentiation method, which does not rely on the addition of exogenous growth factors to culture media, provides an artifact-free approach to identifying bioactive metabolites that specifically and potently induce osteogenesis. We first identify a highly specific metabolite, cholesterol sulfate, an endogenous steroid. Next, a screen of other small molecules with a similar steroid scaffold identified fludrocortisone acetate with both specific and highly potent osteogenic-inducing activity. Further, we implicate cytoskeletal contractility as a measure of osteogenic potency and cell stiffness as a measure of specificity. These findings demonstrate that physical principles can be used to identify bioactive metabolites and then enable optimization of metabolite potency can be optimized by examining structure-function relationships.

Intradermal Delivery of an Immunomodulator for Basal Cell Carcinoma; Expanding the Mechanistic Insight into Solid Microneedle-Enhanced Delivery of Hydrophobic Molecules

Basal cell carcinoma (BCC) is the most common cutaneous malignancy in humans. One of the most efficacious drugs used in the management of BCC is the immunomodulator, imiquimod. However, imiquimod has physiochemical properties that limit its permeation to reach deeper, nodular tumor lesions. The use of microneedles may overcome such limitations and promote intradermal drug delivery. The current work evaluates the effectiveness of using an oscillating microneedle device Dermapen either as a pre- or post-treatment with 5% w/w imiquimod cream application to deliver the drug into the dermis. The effectiveness of microneedles to enhance the permeation of imiquimod was evaluated ex vivo using a Franz cell setup. After a 24-h permeation experiment, sequential tape strips and vertical cross-sections of the porcine skin were collected and analyzed using time-of-flight secondary ion mass spectrometry (ToF-SIMS). In addition, respective Franz cell components were analyzed using high-performance liquid chromatography (HPLC). Analysis of porcine skin cross-sections demonstrated limited dermal permeation of 5% w/w imiquimod cream. Similarly, limited dermal permeation was also seen when 5% w/w imiquimod cream was applied to the skin that was pretreated with the Dermapen, this is known as poke-and-patch. In contrast, when the formulation was applied first to the skin prior to Dermapen application, this is known as patch-and-poke, we observed a significant increase in intradermal permeation of imiquimod. Such enhancement occurs immediately upon microneedle application, generating an intradermal depot that persists for up to 24 h. Intradermal colocalization of isostearic acid, an excipient in the cream, with imiquimod within microneedle channels was also demonstrated. However, such enhancement in intradermal delivery of imiquimod was not observed when the patch-and-poke strategy was used with a non-oscillating microneedle applicator, the Dermastamp. The current work highlights that using the patch-and-poke approach with an oscillating microneedle pen may be a viable approach to improve the current treatment in BCC patients who would prefer a less invasive intervention relative to surgery.

Protein Encapsulation of Experimental Anticancer Agents 5F 203 and Phortress: Towards Precision Drug Delivery

INTRODUCTION

Advancement of novel anticancer drugs into clinical use is frequently halted by their lack of solubility, reduced stability under physiological conditions, and non-specific uptake by normal tissues, causing systemic toxicity. Their progress to use in the clinic could be accelerated by the development of new formulations employing suitable and complementary drug delivery vehicles.

METHODS

A robust method for apoferritin (AFt)-encapsulation of antitumour benzothiazoles has been developed for enhanced activity against and drug delivery to benzothiazole-sensitive cancers.

RESULTS

More than 70 molecules of benzothiazole 5F 203 were encapsulated per AFt cage. Post-encapsulation, the size and integrity of the protein cages were retained as evidenced by dynamic light scattering. ToF-SIMS depth profiling using an argon cluster beam confirmed 5F 203 exclusively within the AFt cavity. Improved encapsulation of benzothiazole lysyl-amide prodrugs was achieved (~130 molecules of Phortress per AFt cage). Transferrin receptor 1, TfR1, was detected in lysates prepared from most cancer cell lines studied, contributing to enhanced anticancer potency of the AFt-encapsulated benzothiazoles (5F 203, Phortress, GW 610, GW 608-Lys). Nanomolar activity was demonstrated by AFt-formulations in breast, ovarian, renal and gastric carcinoma cell lines, whereas GI50 >50 µM was observed in non-tumourigenic MRC-5 fibroblasts. Intracellular 5F 203, a potent aryl hydrocarbon receptor (AhR) ligand, and inducible expression of cytochrome P450 (CYP) 1A1 were detected following exposure of sensitive cells to AFt-5F 203, confirming that the activity of benzothiazoles was not compromised following encapsulation.

CONCLUSION

Our results show enhanced potency and selectivity of AFt-encapsulated 5F 203 against carcinomas derived from breast, ovarian, renal, colorectal as well as gastric cancer models, and offer realistic prospects for potential refinement of tumour-targeting and treatment, and merit further in vivo investigations.

TMOD-11. CHARACTERISATION OF THE POST-SURGICAL INVASIVE TUMOUR NICHE USING ASTROCYTE-GLIOBLASTOMA ORGANOIDS AND DECELLULARISED HUMAN BRAIN

Glioblastoma therapeutic challenges are in considerable part due to myriad survival mechanisms which allow malignant cells to repurpose signalling pathways within discreet microenvironments. These Darwinian adaptations facilitate invasion into brain parenchyma and perivascular space. We hypothesised that pre-clinical modelling of glioma invasion by recapitulating early events occurring immediately after surgery at the glioblastoma invasive margin, could reveal the cross-talk between malignant cells and surrounding healthy astrocytes. We first generated transgenic H1-derived neural stem cells using CRISPR/Cas9-mediated knock-in of the YFP reporter gene under the control of the GFAP promoter at the AAVS1 safe harbour locus. Reproducible ultrahigh-throughput AggreWells™ (7200 mini-wells per plate) were used to create astrocyte-glioblastoma organoids, which we term ‘Gliomasphere Matrices’. YFP-labelled astrocytes were co-cultured with 10 treatment-naïve patient-derived cell lines isolated from the 5-aminolevulinic (5ALA)-determined glioblastoma invasive margin. Co-cultures were seeded upon a sequentially constructed, time-of-flight secondary ion mass spectrometry (ToF-SIMS)-characterised decellularised human brain extract. YFP-astrocytes were purified from each of the 10 Gliomasphere Matrices using fluorescence-activated cell sorting (FACS) after 6- and 10-days co-culture. RNA-sequencing of the putatively reprogrammed YFP-astrocytes showed the characteristic expression of canonical key regulators of multiple malignant diseases including high-grade glioma such as SND1 and EFNB2 in addition to the identification of a single novel marker located at chromosome 1 (C1orf61), highly expressed in malignant glioma when compared to somatic cancers according to TCGA RNA-sequencing data. Differentiated YFP-astrocytes also overexpressed IFITM2 and IFITM10, known to be involved in priming resistance against pathogenic microorganisms. This ultimately suggests a fluctuating state between malignant transformation imposed by the highly infiltrative glioma cells and the counter-action of the normal astrocytes to these deleterious invasive cells. This multi-faceted model offers a unique opportunity to recapitulate early molecular cross-talk which facilitates glioblastoma recurrence and may be utilised for high-throughput drug screening.

EXTH-25. A MECHANICALLY-ENGINEERED SPRAY TO INCREASE BRAIN PENETRATION OF CHEMOTHERAPEUTIC NANOPARTICLES IN THE TREATMENT OF HIGH GRADE GLIOMAS

Design and implementation of innovative local drug delivery systems (DDS) may overcome current limitations in GBM treatment, such as the lack of therapeutic drug concentrations reaching residual GBM cells following surgery. Here we describe a novel DDS which utilises a bespoke mechanically engineered spray device, designed for safe surgical use, to deliver a mucoadhesive hydrogel containing chemotherapeutic nanoparticles (NPs) into the tumour resection margins. The overall aim is to spray a NP and polymer solution onto the resection cavity and potentially increase penetration of anti-cancer drugs within the 2 cm reoccurrence zone beyond the infiltrative margin. The mucoadhesive gel of choice, pectin, is currently used in other in vivo applications; however we have repurposed this for the brain. Pectin is biocompatible with GBM and human astrocyte cells in vitro and showed neither toxicity nor inflammation for up to 2 weeks upon orthotopic brain injection. Pectin is biodegradable in artificial CSF and is capable of being sprayed from the engineered device. A panel of polymeric, oil-based and polymer-coated NPs have been developed and optimised to maximise drug encapsulation of etoposide and olaparib as proof-of-concept for combination drug delivery. Etoposide/olaparib were chosen due to cytotoxicity from 5 GBM cell lines, including primary lines isolated from the invasive tumour margin (Mean IC50 of 1.1 µM and 8.3 µM respectively). The optimal NP/drug formulation (based on drug encapsulation, spray capability and bio-adhesiveness) will ultimately be assessed for tolerability and efficacy using orthotopic allograft and xenograft high-grade glioma models, including measurement of penetration of drug/nanoparticle in ex vivo murine and porcine brain using novel hybrid time-of-flight/Orbitrap TM secondary ion mass spectrometer (orbiSIMS) technology.

P11.62 Brain distribution models to select polymer-delivered drugs for the intra-cavity treatment of malignant glioma

BACKGROUND

Conventional oral or intravenous chemotherapy distributes drugs to the whole body whereby systemic toxicity to healthy parts of the body (e.g. bone marrow failure) limits the maximum dose that can be achieved in the brain. This presents a particular concern for CNS tumours where the blood-brain-barrier (BBB) restricts drug influx from the circulation. The ability to deliver chemotherapy locally at the tumour site offers the opportunity to target residual cancer cells post-surgery whilst minimising systemic toxicity. We have developed a poly(lactic-co-glycolic acid)/poly(ethylene glycol) (PLGA/PEG) polymer matrix that forms a porous paste at room temperature when mixed with chemotherapy-containing saline, solidifying only at body temperature, with close apposition to the irregular surgical cavity. It is important that we can observe whether the drugs released from PLGA/PEG can penetrate brain parenchyma beyond the surgical resection margin at therapeutic doses. Currently the only way to measure the distribution of drugs in the body is to inject radioactive drugs into an animal. We aim to establish drug distribution parameters using label-free mass spectrometry imaging methods, prior to selection of drug formulations for clinically-relevant in vivo models. Drugs that penetrate the brain the furthest will be identified as good candidates for localised brain cancer drug delivery using PLGA/PEG paste.

MATERIAL AND METHODS

Diffusion rates were measured by examining the proportion of olaparib, dasatnib, carboplatin, etoposide, paclitaxel and gemcitabine at 2mg/ml concentration, which passes through 1mm slices of rat brain tissue within Franz cell chambers over a 6 hour period. The spatio-temporal distribution of label-free olaparib and dasatinib within mouse brain homogenate was quantitatively measured using innovative 3D OrbiSIMS, a hybrid time-of-flight / OrbitrapTM secondary ion mass spectrometer.

RESULTS

Within the Franz cell model, carboplatin and gemcitabine showed the highest diffusion rate diffusion at 16.4 and 6.53 µg/cm2/h respectively whereas olaparib, etoposide and paclitaxel were relatively poorly diffused at 1.87, 3.82 and 2.27 µg/cm2/h respectively. The minimum threshold of OrbiSIMS detection for label-free olaparib and dasatinib ions was 0.025 mg/ml and 0.2 mg/ml respectively throughout brain homogenate.

CONCLUSION

This study demonstrates different diffusion rates through brain tissue, between label-free chemotherapy drugs of distinct chemistries, with highest diffusion rates observed for carboplatin and gemcitabine. We also demonstrate label-free detection of olaparib and dasatinib using the innovative 3D OrbiSIMS method. These models will facilitate the rapid identification of agents most amenable for localised biomaterial-based chemotherapy delivery with high brain penetrance.

Rapid Nanogram Scale Screening Method of Microarrays to Evaluate Drug-Polymer Blends Using High-Throughput Printing Technology

A miniaturized, high-throughput assay was optimized to screen polymer-drug solid dispersions using a 2-D Inkjet printer. By simply printing nanoliter amounts of polymer and drug solutions onto an inert surface, drug/polymer microdots of tunable composition were produced in an easily addressable microarray format. The amount of material printed for each dried spot ranged from 25 ng to 650 ng. These arrays were used to assess the stability of drug/polymer dispersions with respect to recrystallization, using polarized light microscopy. One array with a panel of 6 drugs formulated at different ratios with a poly(vinylpyrrolidone-vinyl acetate) (PVPVA) copolymer was developed to estimate a possible bulk (gram-scale) approximation threshold from the final printed nanoamount of formulation. Another array was printed at a fixed final amount of material to establish a literature comparison of one drug formulated with different commercial polymers for validation. This new approach may offer significant efficiency in pharmaceutical formulation screening, with each experiment in the nanomicro-array format requiring from 3 up to 6 orders of magnitude lower amounts of sample than conventional screening methods.

Influence of the plasma sheath on plasma polymer deposition in advance of a mask and down pores

Plasma species that form plasma polymer deposits readily penetrate through small openings and are therefore well suited to coat the interior of porous objects. Here, we show how the size of the cross section of square channels influences the penetration of active species from a hexane plasma and how it affects the formation of surface chemical gradients in the interior of these model pores. WCA mapping and ToF-SIMS imaging are used to visualize the plasma polymer deposit in the interior of the model pores and demonstrate that a strong dependence of the wettability gradient profile only exists up to a channel cross section of about 1 mm. XPS data allow us to calculate a deposition rate of plasma polymerized hexane (ppHex) at discrete positions on the surface and show that the deposition rate of ppHex is reduced by the presence of the mask up to a distance of 16 mm in advance of the channel opening. A strong dependence of the ppHex deposition rate on the cross-section of the channels is found within the first 2 mm in front of the pore opening. An estimation of the sheath thickness suggests that this effect can be attributed to the plasma sheath that perturbs the plasma in front of the pores. Plasma mass spectrometry allows us to identify the nature of the plasma species penetrating from the plasma through the pores and shows that no negatively charged ions are able to penetrate through the small channels. Neutral and positively charged species penetrate several millimeters down the channels and both species are therefore likely to contribute to the formation of the deposit on the sample. In addition, the formation of positively charged higher molecular mass hexane fragments is observed in the gas phase, demonstrating the likelihood of neutral-positive reactions in the plasma.