Simultaneous Determination of Mineral Nutrients and Toxic Metals in M. stenopetala from Southern Ethiopia: A Comparative Study of Three Cultivating Areas Using MP-AES

In this study, for the first time, the levels of thirteen micro- and macromineral nutrients in the leaves, seeds, and supportive soil of Moringa stenopetala (M. stenopetala) were simultaneously determined using microwave plasma atomic emission spectroscopy (MP-AES). The samples were collected during the arid season, in 2019 from the three main M. stenopetala growing areas in southern Ethiopia (Chano Mile Kebele, Nechisar Kebele, and Konso Special Woreda). A novel digestion method for leaf and seed samples was developed using an optimized acid mixture (2.5 : 0.75 : 0.5 of HNO3, HClO4, and H2O2) at 240°C for 2 hrs and 30 min, resulting in clear and colorless solutions. The method makes the digestion process more efficient by minimizing the reagent volume, reducing digestion temperature and time, and simplifying the overall procedure. The efficiency of the optimized procedure was validated by spiking experiments, and the percentage recovery ranged between 94 and 110%. Under optimized experimental conditions, higher concentrations of essential minerals (K, Na, Ca, and Mg) were observed in the plant leaf and seed samples from the three areas. In addition, significant amounts of trace elements (Fe, Mn, Zn, and Cu) were also found. Importantly, no traces of the toxic elements (Cd and Pb) were detected in any of the analyzed samples, suggesting that the leaves and seeds of M. stenopetala are valuable sources of both micro- and macromineral nutrients and are safe from toxic metals. From a dietary perspective, the seed contains almost comparable concentrations of minerals as the leaves. As a result, the seeds of M. stenopetala can serve as an alternative source of minerals and play a role in overcoming the current global food crisis, particularly in the dry season. Analysis of variance at a 95% confidence level revealed significant differences in the levels of all mineral nutrients between the three sample means except K, Ca, Co, and Cu. Generally, the developed method includes an innovative digestion procedure that minimizes reagent consumption, operates at lower temperatures, and requires shorter digestion times, thereby optimizing resource utilization and maintaining analytical accuracy. Notably, the absence of toxic elements in the MP-AES procedure highlights the safety and reliability of M. stenopetala leaves and seeds as valuable, contamination-free sources of essential nutrients.

Electrochemical determination of zinc(II) using N1-hydroxy-N1,N2-diphenylbenzamidine and multi-walled carbon nanotubes modified carbon paste electrode

In this study, a new carbon paste electrode modified with a laboratory-synthesized ligand, N¹-hydroxy-N¹,N²-diphenylbenzamidine (HDPBA) and multi-walled carbon nanotubes (MWCNTs) (HDPBA‒MWCNTs/CPE) has been developed. The modified electrode was applied for preconcentration and voltammetric determination of zinc ions (Zn(II)) by square wave anodic stripping voltammetry (SWASV). The preconcentration of Zn(II) on the electrode surface was performed in 0.1 M Brinton Robinson (B-R) buffer solution (pH 6) at an applied potential of -1.30 V versus Ag/AgCl for 120 s, followed by stripping in the positive potential scan of the SWASV after a quit time of 10 s. Under optimized experimental conditions, the proposed electrode exhibited a wider linear dynamic response for Zn(II) in a concentration range of 0.02-10.00 μM with a detection limit of 2.48 nM. This is due to the excellent metal-chelation property of the ligand, and the good conductivity and large surface area of MWCNTs which significantly improved the sensing performance of the nanocomposite modified electrode. The selectivity of the electrode was studied by evaluating the interference effects of various foreign ions on the peak current of Zn(II). The method exhibited high reproducibility with a relative standard deviation (RSD) of 3.1%. The present method was applied for the determination of zinc ions in water samples. The recovery values in the tested samples were found to be 98.50-106.0%, indicating a good accuracy of the proposed electrode. Furthermore, the electrochemical behavior of HDPBA in acetonitrile and aqueous solutions has been studied.

Development of a new electrochemical method for the determination of copper(ii) at trace levels in environmental and food samples

This paper presents the fabrication of a new modified carbon paste electrode (CPE) with N 1-hydroxy-N 1,N 2-diphenylbenzamidine (HDPBA) and functionalized multi-walled carbon nanotubes (MWCNTs) (HDPBA-MWCNTs/CPE) for highly sensitive and selective determination of Cu(ii) using the square wave anodic stripping voltammetry (SWASV) technique. The fabricated electrode was characterized using various spectroscopic techniques to study its morphological, structural, and electrochemical properties. The accumulation of Cu(ii) on the surface of HDPBA-MWCNTs/CPE was done in 0.1 M ammonium chloride (NH4Cl, pH 5) solution at an applied potential of -0.70 V versus Ag/AgCl for 180 s, followed by electrochemical stripping in the positive scan of the voltammetry after a resting time of 10 s. The developed HDPBA-MWCNTs/CPE was found to be highly selective, sensitive and reproducible. At optimal conditions of the experiment, the proposed method exhibited a very low limit of detection (0.0048 nM Cu(ii)), a wide linear dynamic range (0.00007-1.5000 μM Cu(ii)), and good reproducibility with relative standard deviation (RSD) value of 3.7%. The effect of various foreign ions on the voltammetric response of Cu(ii) was investigated and the electrode was found to be highly selective to Cu(ii). The practical applicability of the proposed HDPBA-MWCNTs/CPE was studied by applying the electrode for the quantification of Cu(ii) contents in environmental water (wastewater and tap water), soft drink (Fanta and Sprite), and food supplement (commercially available multi-mineral/vitamin tablets) samples. The present method was validated with atomic absorption spectrometry (AAS). The results found from the two methods are in good agreement with a 95% confidence level.

A Novel Carbon Paste Electrode Modified with N1-Hydroxy-N1,N2-Diphenylbenzamidine for the Electrochemical Determination of Cadmium(II) in Environmental Samples

The present study introduces a novel electrode for rapid, highly sensitive, and selective electrochemical sensor for cadmium(II) using 5% N¹-hydroxy-N¹,N²-diphenylbenzamidine (HDPBA) modified carbon paste electrode (CPE) (HDPBA‒CPE). Surface characterizations and structural analysis of the proposed HDPBA‒CPE were performed using several analytical techniques. The voltammetric measurements of Cd(II) were conducted by cyclic voltammetry (CV) and square wave anodic stripping voltammetry (SWASV). Several experimental conditions such as composition and pH of buffer solutions, HDPBA composition, accumulation potential and time, and other voltammetric conditions were optimized. Cd(II) was preconcentrated on the modified electrode surface for 270 s using Britton Robinson (B-R) buffer (0.1 M, pH 4) at -1.0 V versus Ag/AgCl, followed by electrochemical oxidation of the accumulated Cd(II) in the positive scan of SWASV after a quiet time of 10 s. Under optimized parameters, the proposed method showed a linear range of 0.3-100 nM Cd(II) with a detection limit of 0.032 nM. The fabricated HDPBA-modified carbon paste electrode exhibited excellent sensitivity, selectivity, stability, and reproducibility (with RSD of 3.8%). The developed HDPBA‒CPE was used for the quantification of Cd(II) in tobacco and environmental water samples, and it was found to be applicable for the determination of different types of real samples.

Prevalence of tuberculosis treatment non-adherence in Ethiopia: a systematic review and meta-analysis

<sec> <title>SETTING</title> Non-adherence to treatment is one of the challenges facing global tuberculosis (TB) control. In Ethiopia, an extremely variable and high magnitude of TB treatment non-adherence have been reported from different parts of the country. However, there has been no attempt to estimate the pooled prevalence of non-adherence from this heterogeneous data. </sec> <sec> <title>OBJECTIVE</title> To review the available literature and estimate the overall prevalence of treatment non-adherence among patients with TB on first-line treatment in Ethiopia. </sec> <sec> <title>DESIGN</title> A systematic review and meta-analysis of published articles on TB treatment non-adherence. </sec> <sec> <title>RESULTS</title> We included 26 studies, which contained data on 37 381 patients with TB. The crude prevalence of non-adherence reported by the studies included was extremely variable (range 0.2-35%). The overall pooled estimate of non-adherence prevalence was 10.0% (95%CI 8.0-11.0). The pooled prevalence of patients lost to follow-up alone was 5.0% (95%CI 4.0-6.0), while the pooled prevalence of intermittent non-adherence was 20.0% (95%CI 15.0-25.0). </sec> <sec> <title>CONCLUSION</title> The rate of TB treatment non-adherence in Ethiopia remains too high to achieve target treatment success rates and prevent drug resistance. Implementing an effective patient retention scheme, along with the DOTS strategy, is critical to improving treatment adherence and preventing drug resistance. </sec>.