Cost-effectiveness analysis of rivaroxaban for treatment and secondary prevention of venous thromboembolism in the Netherlands

BACKGROUND

Until recently, standard treatment of venous thromboembolism (VTE) concerned a combination of short-term low-molecular-weight heparin (LMWH) and long-term vitamin-K antagonist (VKA). Risk of bleeding and the requirement for regular anticoagulation monitoring are, however, limiting their use. Rivaroxaban is a novel oral anticoagulant associated with a significantly lower risk of major bleeds (hazard ratio = 0.54, 95% confidence interval = 0.37-0.79) compared to LMWH/VKA therapy, and does not require regular anticoagulation monitoring.

AIMS

To evaluate the health economic consequences of treating acute VTE patients with rivaroxaban compared to treatment with LMWH/VKA, viewed from the Dutch societal perspective.

METHODS

A life-time Markov model was populated with the findings of the EINSTEIN phase III clinical trial to analyze cost-effectiveness of rivaroxaban therapy in treatment and prevention of VTE from a Dutch societal perspective. Primary model outcomes were total and incremental quality-adjusted life years (QALYs), as well as life expectancy and costs.

RESULTS

Over a patient's lifetime, rivaroxaban was shown to be dominant, with health gains of 0.047 QALYs and cost savings of €304 compared to LMWH/VKA therapy. Dominance was robustly present in all sensitivity analyses. Major drivers of the differences between the two treatment arms were related to anticoagulation monitoring (medical costs, travel costs, and loss of productivity) and the occurrence of major bleeds.

CONCLUSION

Rivaroxaban treatment of patients with venous thromboembolism results in health gains and cost savings compared to LMWH/VKA therapy. This conclusion holds for the Dutch setting, both for the societal perspective, as well as the healthcare perspective.

Prediction of Mechanical Properties of the Cancellous Bone of the Mandibular Condyle

The mechanical properties of cancellous bone depend on the bone structure. The present study examined the extent to which the apparent stiffness of the cancellous bone of the human mandibular condyle can be predicted from its structure. Two models were compared. The first, a structure model, used structural parameters such as bone volume fraction and anisotropy to estimate the apparent stiffness. The second was a finite element model (FEM) of the cancellous bone. The bone structure was characterized by micro-computed tomography. The calculated stiffnesses of 24 bone samples were compared with measured stiffnesses. Both models could predict 89% of the variation in the measured stiffnesses. From the stiffness approximated by FEM in combination with the measured stiffness, the stiffness of the bone tissue was estimated to be 11.1 ± 3.2 GPa. It was concluded that both models could predict the stiffness of cancellous bone with adequate accuracy.

Changed Morphology and Mechanical Properties of Cancellous Bone in the Mandibular Condyles of Edentate People

Since edentate subjects have a reduced masticatory function, it can be expected that the morphology of the cancellous bone of their mandibular condyles has changed according to the altered mechanical environment. In the present study, the morphology of cylindrical cancellous bone specimens of the mandibular condyles of edentate subjects (n = 25) was compared with that of dentate subjects (n = 24) by means of micro-computed tomography and by the application of Archimedes’ principle. Stiffness and strength were determined by destructive mechanical testing. Compared with dentate subjects, it appeared that, in edentate subjects, the bone was less dense and the trabecular structure was less plate-like. The regression models of stiffness and strength built from bone volume fraction and the trabecular orientation relative to the axis of the specimen were similar for both dentate and edentate subjects. This indicates that, under reduced mechanical load, the fundamental relationship between bone morphology and mechanical properties does not change.

Biomechanical behaviour of the periodontal ligament of the beagle dog during the first 5 hours of orthodontic force application

The aim of this study was to describe the mechanical behaviour of the periodontal ligament (PDL) in response to loading with different forces for a period of 5 hours. Seven young adult male beagle dogs (age 1.0-1.5 years) were used. After extractions and placement of implants, custom-made appliances on both sides of the mandible were used to measure the displacement of the second premolars. Tooth displacement was measured during 5 hours of force application. Each dog underwent two measurement sessions. One premolar was moved with a force of 100 cN in the first session and with 50 cN in the second. The contralateral premolar was moved with forces of 100 and 300 cN, respectively. Time-displacement curves showed a rapid instantaneous response lasting only a few seconds followed by a slowly decreasing creep displacement. The instantaneous response demonstrated a large individual variability, caused by both a dog and a force effect. Differences in tooth and PDL anatomy and in the orientation of the periodontal fibres are probably important in this respect. The individual variability faded after the first seconds of tooth displacement, when the viscoelastic properties of the periodontal fibres became more pronounced. The force effect was non-linear for the first minute. Higher forces did not lead to proportionally larger displacements. The non-linearity decreased in the second response. The PDL is a complex material that might be considered as a non-linear fibre-reinforced poroviscoelastic material.

The effect of bone loss on rod-like and plate-like trabeculae in the cancellous bone of the mandibular condyle

Bone loss may affect the structure of cancellous bone. But its effect on trabeculae with different characteristics, like rods and plates, is not accurately known. This study analyzes the effect of bone loss on individual rod-like and plate-like trabeculae. 94 specimens were obtained from mandibular condyles from both dentate and edentate humans and scanned with a micro-CT scanner. The bone volume fraction (BV/TV) of these specimens ranged from 7% to 30%. Next, the rod-like and plate-like trabeculae were identified with an especially developed algorithm. Plate volume fraction (PV/TV), rod volume fraction (RV/TV), plate thickness, rod thickness, number of plates, and number of rods were determined. In individual specimens, the thickness of the rods ranged from 40 mum to 180 mum, while the thickness of the plates ranged from 40 mum to 300 mum. In every specimen, the thickness of the plates was larger than the thickness of the rods. Statistical analysis revealed that PV/TV was proportional (r = 0.98, P < 0.001) and RV/TV inversely proportional (r = -0.45, P < 0.001) to BV/TV. Also the thickness of the plates correlated with BV/TV (r = 0.62, P < 0.001), while the thickness of the rods (mean = 90 mum, SD = 7 mum) remained constant (r = -0.09, P = 0.378). A four-fold reduction of the bone volume fraction was accompanied by a three-fold reduction of the number of plates and a 40% reduction of their thickness, but also by a three-fold increase in the number of rods and RV/TV. It was concluded that the effect of bone loss on plate-like trabeculae was opposite to its effect on rod-like trabeculae. Remarkably, the thickness of the rods (90 mum) was independent of the bone volume fraction. This suggests that there is a minimal thickness for trabeculae.

Bone tissue stiffness in the mandibular condyle is dependent on the direction and density of the cancellous structure

Variation in the apparent stiffness of cancellous bone is generally ascribed to variation in cancellous structure and density, while the bone tissue stiffness is assumed to be constant. The purpose of the present study was to examine whether the bone tissue stiffness is dependent on the direction and density of the cancellous structure. Bone tissue stiffness was estimated by combining mechanical testing and micro-finite element (micro-FE) modeling on cylindrical bone specimens obtained from the human mandibular condyle. One set of specimens was tested in the vertical direction of the condyle (n = 39) and another set in the transverse direction (n = 30). The cancellous structure of the specimens was characterized by micro-CT. The apparent bone stiffnesses predicted by the FE model correlated strongly (r2 = 0.91) with the measured apparent bone stiffnesses. Apparent bone stiffness in the transverse direction was considerably smaller than that in the vertical direction. In contrast, the predicted bone tissue stiffness was significantly larger in the transverse direction (E = 13.70 GPa) than in the vertical direction (E = 11.87 GPa). In addition, bone tissue stiffness correlated negatively with the bone volume fraction and directional sensitivity of the bone tissue stiffness increased with a decrease of bone volume fraction. The results suggest that the transversely oriented trabeculae in the mandibular condyle are stiffer and more mineralized than the vertically oriented trabeculae and that bone loss is compensated by an increase in the degree of mineralization.

Architectural measures of the cancellous bone of the mandibular condyle identified by principal components analysis

As several morphological parameters of cancellous bone express more or less the same architectural measure, we applied principal components analysis to group these measures and correlated these to the mechanical properties. Cylindrical specimens (n = 24) were obtained in different orientations from embalmed mandibular condyles; the angle of the first principal direction and the axis of the specimen, expressing the orientation of the trabeculae, ranged from 10 degrees to 87 degrees. Morphological parameters were determined by a method based on Archimedes' principle and by micro-CT scanning, and the mechanical properties were obtained by mechanical testing. The principal components analysis was used to obtain a set of independent components to describe the morphology. This set was entered into linear regression analyses for explaining the variance in mechanical properties. The principal components analysis revealed four components: amount of bone, number of trabeculae, trabecular orientation, and miscellaneous. They accounted for about 90% of the variance in the morphological variables. The component loadings indicated that a higher amount of bone was primarily associated with more plate-like trabeculae, and not with more or thicker trabeculae. The trabecular orientation was most determinative (about 50%) in explaining stiffness, strength, and failure energy. The amount of bone was second most determinative and increased the explained variance to about 72%. These results suggest that trabecular orientation and amount of bone are important in explaining the anisotropic mechanical properties of the cancellous bone of the mandibular condyle.

Reduced mechanical load decreases the density, stiffness, and strength of cancellous bone of the mandibular condyle

OBJECTIVE

To investigate the influence of decreased mechanical loading on the density and mechanical properties of the cancellous bone of the human mandibular condyle.

DESIGN

Destructive compressive mechanical tests were performed on cancellous bone specimens.Background. Reduced masticatory function in edentate people leads to a reduction of forces acting on the mandible. As bone reacts to its mechanical environment a change in its material properties can be expected.

METHODS

Cylindrical bone specimens were obtained from dentate and edentate embalmed cadavers. Mechanical parameters were determined in the axial and in the transverse directions. Subsequently, density parameters were determined according to a method based on Archimedes' principle.

RESULTS

The apparent density and volume fraction of the bone were about 18% lower in the edentate group; no age-related effect on density was found. The decrease of bone in the edentate group was associated with a lower stiffness and strength (about 22% and 28%, respectively). The ultimate strain, however, did not differ between the two groups. Both groups had similar mechanical anisotropy; in axial loading the bone was stiffer and stronger than in transverse loading.

CONCLUSIONS

Reduced mechanical load had affected the density and herewith the mechanical properties of condylar cancellous bone, but not its anisotropy.

RELEVANCE

The change in material properties of the cancellous bone after loss of teeth indicate that the mandibular condyle is sensitive for changes in its mechanical environment. Therefore, changes in mechanical loading of the condyle have to be accounted for in surgical procedures of the mandible.

Mechanical significance of the trabecular microstructure of the human mandibular condyle

The human mandibular condyle has a parasagittal plate-like trabecular structure. We tested the hypothesis that this structure reflects the mechanical loading of the condyle. We developed a finite element model of the condyle to analyze the strains occurring during static compressive loading. The principal strains in the trabecular bone were primarily oriented in the sagittal plane. The first component was compressive and oriented supero-inferiorly. The second component was negligibly small and oriented medio-laterally. The third component was tensile, oriented antero-posteriorly, and almost equal to the compressive strain. This tensile strain was caused by antero-posterior bulging of the cortex. This means that the trabecular structure is also subjected to significant tensile forces. The orientation of the parasagittal strains followed the direction of the applied load. It was concluded that the trabecular structure of the mandibular condyle is optimal in resisting the compressive and tensile strains to which it is subjected.