Computation for biomechanical analysis of aortic aneurysms: the importance of computational grid

Aortic wall stress is the most common variable of interest in abdominal aortic aneurysm (AAA) rupture risk assessment. Computation of such stress has been dominated by finite element analysis. However, the effects of finite element (FE) formulation, element quality, and methods of FE mesh construction on the efficiency, robustness, and accuracy of such computation have attracted little attention. In this study, we fill this knowledge gap by comparing the results of the calculated aortic wall stress for ten AAA patients using tetrahedral and hexahedral meshes when varying the FE formulation (displacement-based and hybrid), FE shape functions, spatial integration scheme, and number of elements through the wall thickness.

On stress in abdominal aortic aneurysm: Linear versus non-linear analysis and aneurysm rupture risk

We present comprehensive biomechanical analyses of abdominal aortic aneurysms (AAA) for 43 patients. We compare stress magnitudes and stress distributions within arterial walls of abdominal aortic aneurysms (AAA) obtained using two simulation and modelling methods: (a) Fully automated and computationally very efficient linear method embedded in the software platform Biomechanics based Prediction of Aneurysm Rupture Risk (BioPARR), freely available from https://bioparr.mech.uwa.edu.au/; (b) More complex and much more computationally demanding Non-Linear Iterative Stress Analysis (Non-LISA) that uses a non-linear inverse iterative approach and strongly non-linear material model. Both methods predicted localised high stress zones with over 90% of AAA model volume fraction subjected to stress below 20% of the 99th percentile maximum principal stress. However, for the non-linear iterative method, the peak maximum principal stress (and 99th percentile maximum principal stress) was higher and the stress magnitude in the low stress area lower than for the automated linear method embedded in BioPARR. Differences between the stress distributions obtained using the two methods tended to be particularly pronounced in the areas where the AAA curvature was large. Performance of the selected characteristic features of the stress fields (we used 99th percentile maximum principal stress) obtained using BioPARR and Non-LISA in distinguishing between the AAAs that would rupture and remain intact was for practical purposes the same for both methods.

Suitability of the Openly Accessible 3D Printed Prosthetic Hands for War-Wounded Children

The field of rehabilitation and assistive devices is being disrupted by innovations in desktop 3D printers and open-source designs. For upper limb prosthetics, those technologies have demonstrated a strong potential to aid those with missing hands. However, there are basic interfacing issues that need to be addressed for long term usage. The functionality, durability, and the price need to be considered especially for those in difficult living conditions. We evaluated the most popular designs of body-powered, 3D printed prosthetic hands. We selected a representative sample and evaluated its suitability for its grasping postures, durability, and cost. The prosthetic hand can perform three grasping postures out of the 33 grasps that a human hand can do. This corresponds to grasping objects similar to a coin, a golf ball, and a credit card. Results showed that the material used in the hand and the cables can withstand a 22 N normal grasping force, which is acceptable based on standards for accessibility design. The cost model showed that a 3D printed hand could be produced for as low as $19. For the benefit of children with congenital missing limbs and for the war-wounded, the results can serve as a baseline study to advance the development of prosthetic hands that are functional yet low-cost.

Design and Analysis of Flexible Joints for a Robust 3D Printed Prosthetic Hand

In war-affected regions in the world, limb loss is one of the leading injuries. The need for low-cost, low-maintenance prostheses arises. The rapid developments in 3D printing allows us to investigate robotic or prosthetic hand designs that can satisfy those basic requirements. 3D printed prosthetic hands are more affordable and lightweight alternatives for prostheses. In this paper, we investigate the flexibility of different designs of the soft joints of a low-cost 3D printed prosthetic hand with respect to the material type. We designed flexible joints from elastomeric materials instead of plastic joints. This modification can make the current 3D printed prosthesis designs more robust. As a drawback from these flexible joints, the prosthetic hand will not be in a full open palm position in its initial state, as compared to typical designs. We then converted this drawback to a beneficial feature by calculating the angles of the natural pose of the human hands and transfer those angles to the prosthetic hands with flexible joints. This work has implications in the design of 3D printed prosthetic hands that can be deployed for war-wounded refugees or for those in low-resource countries.

Data for benchmarking low-cost, 3D printed prosthetic hands

In this article, three different data sets are presented to evaluate a representative of openly accessible 3D printed prosthetic hand. The first data set includes grasping force measurements of human hand and low-cost 3D printed hand. Three grasping functions were evaluated, spherical, cylindrical, and precision grasps. The experimental test was performed using a wearable tactile sensor. The second data set includes the numerical analysis of prosthetic fingers made from Acrylonitrile Butadiene Styrene (ABS) and Polylactic Acid (PLA) materials under different carrying loads. The numerical analyses were carried out by LS-DYNA software. The files can be used for the prosthetic fingers’ evaluation and for the selection of suitable material. The third data set includes the experimental tensile test of ABS and PLA materials. The mechanical properties were calculated from the results, which can be used in the design and fabrication of products from these materials. All the datasets are available from Harvard Dataverse: https://doi.org/10.7910/DVN/GCPAIL.