Efficacy of two polishing systems in reestablishing the surface smoothness of posterior monolithic lithium disilicate restorations: One-year results of a split-mouth randomized controlled clinical trial

STATEMENT OF PROBLEM

Selecting the optimal polishing procedure to reestablish surface smoothness after occlusal adjustment is essential for the long-term success of glass-ceramic restorations. While in vitro studies have shown different effective polishing protocols, clinical trials are lacking.

PURPOSE

The purpose of this split-mouth controlled clinical trial was to evaluate the effectiveness of 2 polishing systems in reestablishing the surface smoothness of posterior monolithic lithium disilicate ceramic restorations.

MATERIAL AND METHODS

Ninety-six restorations that required occlusal adjustment after bonding were randomized into 2 groups: Forty-eight restorations were polished by using the Exa Cerapol polishing kit, and the other 48 restorations were polished by using the Shofu polishing kit. The restorations were replicated with epoxy resin at 3 study times-after bonding (t1), after occlusal adjustment (t2), and after polishing (t3)-for quantitative roughness analysis (Ra). Representative specimens from each group were qualitatively analyzed by using a confocal laser microscope. Clinical analyses were performed after the polishing procedure and at 30, 180, and 365 days after the polishing procedure by following the United States Public Health Service (USPHS) criteria. ANOVA and the Tukey multiple comparisons parametric tests were computed (α=.05). The Kaplan-Meier test was used to analyze the survival rate of restorations.

RESULTS

No statistically significant difference was found between the Exa Cerapol and Shofu groups (P=.086). A statistically significant difference was found between study times t1 and t2 and between t2 and t3 (both P<.001) in both experimental groups. No statistically significant difference was found between study times t1 and t3 (P=.181) in either experimental group. For the clinical criterion "integrity of restorations," all the elements analyzed indicated an alfa grade at all study times. The survival rate of the restorations was 100%.

CONCLUSIONS

Both polishing kits were effective in reestablishing the surface smoothness of restorations after occlusal adjustment.

Clinical outcomes of minimally invasive ceramic restorations executed by dentists with different levels of experience. Blind and prospective clinical study

PURPOSE

To evaluate the clinical outcomes of minimally invasive ceramic restorations executed by dentists with different levels of experience.

METHODS

Sixteen professionals were divided into 4 groups according to their experience levels. These included G1: up to 2 years since graduation, G2: 2-5 years, G3: 5-10 years, and G4: more than 10 years. All professionals were trained to follow the same standardized clinical protocol, but were unaware of the research objectives. A single evaluator followed the clinical treatments and recorded the complications and errors that occurred during the execution of the protocol. Ninety-one full crowns, 137 veneers, and 46 no-preparation veneers were prepared from lithium disilicate. Follow-ups were performed immediately and at 30, 180, and 360 days after the cementation and the evaluation based on the modified United States Public Health Service criteria. Ceramic chipping/fracture and debonding were considered failures. Fractures were replicated and submitted to fractographic analysis.

RESULTS

The highest number of failures were found in G1 followed by G3 and the lowest number of failures were found in G2. The level of success was 94% after 360 days. The fractographic analysis demonstrated the external surface of restorations as the critical area and suggested that failures might occur due to noncompliance with the clinical protocol. There was no correlation between professional experience and number of failures or patient satisfaction.

CONCLUSIONS

Professional experience was not a decisive for patient satisfaction and success of minimally invasive ceramic restorations, and noncompliance with the clinical protocol was associated with early ceramic restoration failures.

Influence of resin cement thickness and temperature variation on mechanical behavior of dental ceramic fragment restoration

To evaluate the stress behavior of ceramic fragment restoration, varying the thickness of the cement layer and intraoral temperature variation. A solid model of a upper lateral incisor was obtained and a defect at enamel distal/incisal edge was restored with a ceramic fragment. Based on this initial model, 4 different models (M) were built: M1 - absence of cement layer (CL) (0 μm of thickness); M2 - CL with an uniform thickness of 50 μm; M3 - CL with 50 μm at the margin of ceramics and 100 μm in the inner area far from margins; M4 - CL with 50 μm at the margin of ceramics and 200 μm in the inner area far from margins. The environment temperature changed from 5 °C to 50 °C in 4 increments. The finite element analysis was performed. Increase the cement layer thickness generated higher stress levels on ceramic surface in all temperatures, as well as on cement interface. In general hot temperature was the worst scenario for ceramic fragments integrity, since tensile and compressive stress were more intense. The maximum principal stress on ceramic fragment was found 90 MPa for M4 at 50 °C, followed for M3 (87 Mpa). For CL, the peak of stress was found for M3 at 5 °C (47 MPa). Is it possible to conclude that thick resin cement layer contribute to higher stress concentration on ceramic fragment, and extremely hot temperatures increase the risk of structural failure, since both ceramic and \cl are exposed to higher compressive and tensile stresses.

Stress distribution in delayed replanted teeth splinted with different orthodontic wires: a three-dimensional finite element analysis

AIM

The aim was to evaluate the biomechanical behavior of the supporting bony structures of replanted teeth and the periodontal ligament (PDL) of adjacent teeth when orthodontic wires with different mechanical properties are applied, with three-dimensional finite element analysis.

MATERIALS AND METHODS

Based on tomographic and microtomographic data, a three-dimensional model of the anterior maxilla with the corresponding teeth (tooth 13-tooth 23) was generated to simulate avulsion and replantation of the tooth 21. The teeth were splinted with orthodontic wire (Ø 0.8 mm) and composite resin. The elastic modulus of the three orthodontic wires used, that is, steel wire (FA), titanium-molybdenum wire (FTM), and nitinol wire (FN) were 200 GPa, 84 GPa, and 52 GPa, respectively. An oblique load (100 N) was applied at an angle of 45° on the incisal edge of the replanted tooth and was analyzed using Ansys Workbench software. The maximum (σmax) and minimum (σmin) principal stresses generated in the PDL, cortical and alveolar bones, and the modified von Mises (σvM) values for the orthodontic wires were obtained.

RESULTS

With regard to the cortical bone and PDL, the highest σmin and σmax values for FTM, FN, and FA were checked. With regard to the alveolar bone, σmax and σmin values were highest for FA, followed by FTM and FN. The σvM values of the orthodontic wires followed the order of rigidity of the alloys, that is, FA > FTM > FN.

CONCLUSION

The biomechanical behavior of the analyzed structures with regard to all the three patterns of flexibility was similar.

Effect of postpolymerization method on the color stability of composite resins submitted to ultraviolet aging

The aim of this research was to evaluate the effect of postpolymerization method on the color stability of resin-based composites. Samples of direct and indirect restorative materials were polymerized with two photo-curing units (Visio photo-curing oven system and LED Elipar Freelight 2). All samples were submitted to an initial chromatic analysis using a spectrometer and submitted to ultraviolet-accelerated artificial aging. The direct material showed less color change than the indirect material, independent of the photo-activation method used. Samples photo cured with the LED system showed less change than those photo cured with the Visio system. The postpolymerization oven did not improve the color stability of direct and indirect resin-based composites.