Mandibular autorotation: a critical virtual parameter in clinical decision-making regarding maxilla-first versus mandible-first sequence

Large degrees of mandibular autorotation during intermediate splint design are prone to transfer error and decrease accuracy. The purpose of this study was to evaluate the amount of mandibular autorotation necessary to design intermediate splints for maxilla- and mandible-first sequences using virtual planning software, to help the clinical decision-making regarding the most adequate sequence for each patient. The influence of specific orthognathic movements (different vertical and sagittal changes at the Le Fort I level, cant correction) and the type of maxillofacial deformity (skeletal Class II, III, anterior open bite) were evaluated to identify those that would require higher levels of autorotation for each sequence. Three-dimensional virtual surgical planning data of 194 patients were reviewed (126 female, 68 male; mean age 26.5 ± 11.0 years; 143 skeletal Class II, 51 skeletal Class III) and subgroup analyses were conducted using the Kruskal-Wallis test and post-hoc pairwise comparisons. As an additional parameter (mandibular autorotation), maxilla-first is indicated for bimaxillary osteotomies with Le Fort I posterior intrusion, anterior open bite, and skeletal Class III, while mandible-first is recommended for Le Fort I global extrusion, especially with maxillary cant correction.

Cone-beam computerized tomography imaging and analysis of the upper airway: a systematic review of the literature

A systematic review of the literature concerning upper airway imaging and analysis using cone-beam computed tomography (CBCT) was performed. A PubMed search (National Library of Medicine, NCBI; revised 9th January 2011) yielded 382 papers published between 1968 and 2010. The 382 full papers were screened in detail. 46 articles were considered clinically or technically relevant and were included in this systematic review. These were classified as articles on accuracy and reliability of CBCT imaging of the upper airway (n=4), accuracy and reliability of DICOM viewers (n=2), synopsis (n=10), technical (n=7) and clinical applications (n=27). When one paper was considered related to two or more categories, it was assigned to each relevant group. Results indicate that three-dimensional (3D) analysis of the upper airway using CBCT can be achieved in an accurate and reliable manner. Important obstacles still need to be addressed, including the impact of respiration phase, influence of tongue position and mandible morphology, longitudinal and cross-sectional 3D CBCT upper airway evaluation, and 3D CBCT definition of the anatomical boundaries of the upper airway.

A comparison of frontal radiographs obtained from cone beam CT scans and conventional frontal radiographs of human skulls

This study evaluated whether measurements on conventional frontal radiographs are comparable with measurements on cone beam computed tomography (CBCT)-constructed frontal cephalometric radiographs taken from dry human skulls. CBCT scans and conventional frontal cephalometric radiographs were made of 40 dry skulls. With I-Cat Vision((R)) software, a cephalometric radiograph was constructed from the CBCT scan. Standard cephalometric software was used to identify landmarks and calculate ratios and angles. The same operator identified 10 landmarks on both types of cephalometric radiographs on all Images 5 times with a time-interval of 1 week. Intra-observer reliability was acceptable for all measurements. The reproducibility of the measurements on the frontal radiographs obtained from the CBCT scans was higher than those on conventional frontal radiographs. There is a statistically significant and clinically relevant difference between measurements on conventional and constructed frontal radiographs. There is a clinically relevant difference between angular measurements performed on conventional frontal cephalometric radiographs, compared with measurements on frontal cephalometric radiographs constructed from CBCT scans, owing to different positioning of patients in both devices. Positioning of the patient in the CBCT device appears to be an important factor in cases where a 2D projection of the 3D scan is made.

The use of a new 3D splint and double CT scan procedure to obtain an accurate anatomic virtual augmented model of the skull

Three-dimensional (3D) virtual planning of orthognathic surgery requires detailed visualization of the interocclusal relationship. The purpose of this study was to introduce the modification of the double computed tomography (CT) scan procedure using a newly designed 3D splint in order to obtain a detailed anatomic 3D virtual augmented model of the skull. A total of 10 dry adult human cadaver skulls were used to evaluate the accuracy of the automatic rigid registration method for fusion of both CT datasets (Maxilim, version 1.3.0). The overall mean registration error was 0.1355+/-0.0323 mm (range 0.0760-0.1782 mm). Analysis of variance showed a registration method error of 0.0564 mm (P < 0.001; 95% confidence interval = 0.0491-0.0622). The combination of the newly designed 3D splint with the double CT scan procedure allowed accurate registration and the set-up of an accurate anatomic 3D virtual augmented model of the skull with detailed dental surface.

Effect of platelet-rich-plasma on cranial distraction osteogenesis in sheep: preliminary clinical and radiographic results

The purpose of this study was to investigate the effect of platelet-rich-plasma (PRP) on cranial distraction osteogenesis. Standardized calvaria critical size defects (6 cm x 5 cm) were created in 16 adult female sheep. Bifocal cranial transport distraction osteogenesis with autogenous free calvaria bone grafts (2 cm x 4 cm) was performed at a rate of 1mm once daily to a total of 30 mm. The 16 sheep involved in the experiment were randomly divided into four groups, four animals in each: Group 1 (no PRP, latency 5 days); Group 2 (no PRP, latency 0 day), Group 3 (PRP, latency 5 days) and Group 4 (PRP, latency 0 day). After a consolidation phase of 6 weeks, the animals were sacrificed and specimens harvested for conventional radiological and 3D quantitative computer tomographic (3D-QCT) assessment. New bone was generated in the distraction zone in all groups. There were significantly (P < 0.05) higher densities in the proximal region of the distraction regenerate in Group 4 (PRP, latency 0 day) compared to Group 2. However, no significant differences in mean density of the total distraction regenerate were found, neither in volume of the bony regenerate between the experimental groups. This study showed that PRP only had an effect on bone regeneration if active distraction was started immediately after application of PRP in the distraction gap.

Assessment of the distraction regenerate using three-dimensional quantitative computer tomography

This study presents a new method for objective assessment of the distraction regenerate using three-dimensional quantitative computer tomography (3D-QCT). The distraction specimens of 16 sheep that underwent bifocal cranial distraction osteogenesis to reconstruct a critical size defect were used to evaluate this method. To analyse the validity of this method the results were compared to conventional quantitative computer tomography (QCT). Squared correlation coefficients (r(2)) according to Sackett showed a high reliability (r(2) > 70% for the total DO regenerate, DO Regions 2-4). Method comparison according to Bland-Altman (< or =6.25% of measurements out of 95% limits of agreement) showed that three-dimensional computer tomography based bone densitometry is valid for future DO research.

A comparison of two types of free bone grafts as transport discs in segmental distraction for reconstruction of calvarial bone defects: an experimental study

INTRODUCTION

Several investigations over the past few years have shown that the importance of preserving the blood supply of the transport disc during segmental distraction has been overestimated. It was clearly demonstrated that distraction osteogenesis by local bone transportation could be achieved even with free bone grafts. So far, there have been no systematic investigations into how different types of free bone grafts vary in their function and suitability as transport discs in segmental craniofacial distraction. The aim of this study was to develop criteria to aid the clinician in selecting the most suitable free bone graft for distraction purposes.

MATERIALS AND METHODS

Under general anesthesia, calvarial defects measuring 6 x 5 cm were created in 12 adult black head sheep in order to reconstruct them by segmental distraction using two different types of bone grafts as transport discs. Group 1 (n=6) received autotopical membranous bone of the calvarium as the transport segment, while group 2 (n=6) received heterotopical enchondral material from the iliac crest. Distraction was started postoperatively after 5 days at 0.6 mm/day and continued for 7 weeks. After a further 6 weeks of consolidation, the animals were killed and specimens examined macroscopically, radiographically and histologically.

RESULTS

The significantly better quality of bone regenerates of group 1 was clearly influenced by the significantly better stability of the transport disc's connection to the distraction device, the calvaria grafts showing better volume stability and better mechanical resistance during transport than the iliac bone. The influence of both types of bone grafts on the macro- and microstructure of the newly formed bone was clearly evident. The mineralization density of group 2 regenerates was significantly lower than that of group 1 specimens.

CONCLUSION

High mechanical stability of the bone graft is a very important point to consider when selecting a free graft for use as transport disc in local bone transport, especially if transport is necessary over long distances.

Ortho- and heterotopic bone grafts in bifocal transport osteogenesis for craniofacial reconstruction--an experimental study in sheep

Bifocal transport osteogenesis (BTO) is a promising technique for the reconstruction of extended osseous craniofacial defects. Aim of this study was to determine the potential of this technique related to various donor sites of the transport segment. In 10 adult sheep critical size defects of the calvaria were treated by gradual movement of a transport segment consisting either of autogenous regional free calvarial bone grafts (n=5) or autogenous illiac free bone grafts (n=5). Latency period was 5 days; the rate of distraction was 1mm per day and extended approximately 40 days. The consolidation period was 28 days. After harvesting, specimens were investigated by conventional radiography, CT-scans, histologically and by fluorescence. In both groups transport osteogenesis resulted in a complete closure of the critical size defect. Membranous bone formation and remodeling occurred during the entire period of distraction and consolidation. The volumes and thickness of newly formed bone at the defect site were increased significantly when calvarial bone grafts were used (P<0.05). Iliac bone grafts became progrediently smaller during distraction, while the volume of calvarial grafts remained relatively constant (P<0.05). In conclusion, transport segments consisting of calvarial and iliac bone resulted in a reliable closure of craniofacial critical size defects in adult organisms; the application of calvarial bone grafts resulted in an increased extend of bone formation.