The Genetic Production of Synthetic Crystalline Protein Polymers

Genetic and protein engineering are components of a new polymer chemistry which provide the tools for producing macromolecular polyamide copolymers of diversity and precision far beyond the current capabilities of synthetic polymer chemistry. The genetic machinery allows molecular control of chemical and physical chain properties. Nature utilizes this control to formulate protein polymers into materials with extraordinary mechanical properties such as the strength and toughness of silk and the elasticity and resilience of mammalian elastin. The protein chains which make up these fibers consist of extensive repeating oligopeptide sequences. By producing synthetically designed protein chains containing many tandem repeats of only one repetitive sequence block (homoblock polymers), we are able to evaluate the inherent contribution of each repeat to the overall material properties. Using biotechnology, we produced homoblock protein polymers consisting exclusively of silklike crystalline blocks in quantities sufficient for material evaluation studies (10–100 grams). Silk-like homoblock polymers, as produced by microbial fermentation, exhibited measurable crystallinity both in solution and in solid state. The chain properties of the homoblock polymer were changed by adding blocks of amino acids designed to contribute different structural or functional properties. We produced alternating copolymers of various amounts of silk-like and elastin-like blocks ranging from a ratio of 1:4 to 2:1, respectively. The crystallinity of each copolymer varied with the extent of crystalline block interruption. The substitution of the elastin block with one containing the amino acids from human fibronectin responsible for mammalian cell attachment, produced a highly active silk-like copolymer with biological activity. The ability to specifically engineer the mechanical and functional properties of a fiber material is a potential outcome of this technology.

In-situ self-assembling protein polymer gel systems for administration, delivery, and release of drugs

Sequential block copolymers consisting of tandem repetition of amino acids have been constructed and genetically produced based on the natural repeating structures of silk and elastin protein. Combinations of silklike and elastinlike amino acid sequence blocks in a high molecular weight protein polymer are used to confer properties similar to those observed with hard block and soft block segmented polyurethanes. A certain subset of these silk-elastinlike protein compositions, termed ProLastins, will undergo an irreversible solution to gel transition in physiological, aqueous solution. The transition occurs over time and can be controlled by temperature, solution conditions, and additives which either prevent or promote hydrogen bond-mediated chain crystallization. The process involves no covalent crosslinking. Characterization of the gelling properties of various ProLastin compositions and their ability to release compounds which are incorporated directly into the gels are presented.

Acanthocheilonema viteae: vaccination with irradiated L3 induces resistance in three species of rodents (Meriones unguiculatus, Mastomys coucha, Mesocricetus auratus)

Three species of rodents were immunized with 50 irradiated (35 krad) stage-3 larvae (L3) of the filaria Acanthocheilonema viteae and challenged with an infection of normal L3. The immunization induced a significant reduction of the worm burden developing from the challenge infection in all host species, the jird (Meriones unguiculatus), the multimammate rat (Mastomys coucha) and the golden hamster (Mesocricetus auratus). The induced resistance was highest in jirds (92.5 +/- 9.7) followed by golden hamsters (59.4 +/- 26.6) and multimammate rats (55.1 +/- 40.4). The time course of antibody response against antigens of L3, adult worms and microfilariae, as studied by ELISA, showed quantitative and qualitative differences between the species. The antibody response against L3 antigens in immunoblots was similar in all species. Only one of the golden hamsters developed an antibody response against the surface of vector derived L3, while sera of jirds and multimammate rats did not react with L3 surface.

Acanthocheilonema viteae: rational design of the life cycle to increase production of parasite material using less experimental animals

The maintenance of the life cycle of Acanthocheilonema viteae is described with the aim to increase the production of parasite material using less experimental animals. The filaria was maintained in jirds (Meriones unguiculatus) and in soft ticks (Ornithodoros moubata). The optimal infection dosis for jirds was 80 infective larvae (L3). The mean worm number in groups of animals varied between 18 and 30 adult worms. A stable microfilaremia developed and only few animals developed pathological alterations as a consequence of the infection. A simple membrane feeding apparatus allowed mass feeding of ticks. Infection of ticks with microfilariae (mf) using this technique resulted in a mean no. of 594 +/- 527.2 L3/tick. L3 and mf were cryopreserved in liquid N2 with a simple technique. The described maintenance of the life cycle reduced the amount of required experimental animals to 30-40% of the originally needed numbers.

Acanthocheilonema viteae: vaccination of jirds with irradiation-attenuated stage-3 larvae and with exported larval antigens

Jirds (Meriones unguiculatus) were immunized with irradiated (35 krad) stage-3 larvae (L3) of Acanthocheilonema viteae. The induced resistance against homologous challenge infection and the antibody response of the animals were studied. Immunization with 3, 2, or 1 dose of 50 irradiated L3 induced approximately 90% resistance. Immunization with a single dose of only 5 irradiated L3 resulted in 60.8% protection while immunization with a single dose of 25 L3 induced 94.1% protection. The protection induced with 3 doses of 50 irradiated L3 did not decrease significantly during a period of 6 months. Sera of a proportion, but not all resistant jirds, contained antibodies against the surface of vector derived L3 as defined by IFAT. No surface antigens of microfilariae or adult worms were recognized by the sera. Vaccinated animals had antibody responses against antigens in the inner organs of L3 and in the cuticle and reproductive organs of adult worms as shown by IFAT. Immunoblotting with SDS-PAGE-separated L3 antigens and L3-CSN revealed that all sera contained antibodies against two exported antigens of 205 and 68 kDa, and against a nonexported antigen of 18 kDa. The 205-kDa antigen easily degraded into fragments of 165, 140, 125, and 105 kDa which were recognized by resistant jird sera. Various antigens of adult worms, but relatively few antigens of microfilariae, were also recognized. To test the relevance of exported antigens of L3 to resistance, jirds were immunized with L3-CSN together with a mild adjuvant. This immunization induced 67.7% resistance against challenge infection and sera of the immunized animals recognized the 205- and 68-kDa antigens of L3.

Genetic engineering of structural protein polymers

Genetic and protein engineering are components of a new polymer chemistry that provide the tools for producing macromolecular polyamide copolymers of diversity and precision far beyond the current capabilities of synthetic polymer chemistry. The genetic machinery allows molecular control of chemical and physical chain properties. Nature utilizes this control to formulate protein polymers into materials with extraordinary mechanical properties, such as the strength and toughness of silk and the elasticity and resilience of mammalian elastin. The properties of these materials have been attributed to the presence of short repeating oligopeptide sequences contained in the proteins, fibroin, and elastin. We have produced homoblock protein polymers consisting exclusively of silk-like crystalline blocks and elastin-like flexible blocks. We have demonstrated that each homoblock polymer as produced by microbial fermentation exhibits measurable properties of crystallinity and elasticity. Additionally, we have produced alternating block copolymers of various amounts of silk-like and elastin-like blocks, ranging from a ratio of 1:4 to 2:1, respectively. The crystallinity of each copolymer varies with the amount of crystalline block interruptions. The production of fiber materials with custom-engineered mechanical properties is a potential outcome of this technology.

Primary structure of an oligomeric antigen of Treponema pallidum

The properties and sequence of an oligomeric antigen of Treponema pallidum are presented. Antigen C1-5 assembles into oligomers of 140,000 and greater. The nucleotide sequence predicts an open reading frame for a protein monomer of 19,400, confirmed by amino-terminal sequencing of the recombinant antigen.

Pituitary growth hormone response in rats during a 24-hour infusion of growth hormone-releasing factor

The pituitary GH response during a 24-h iv infusion of GH-releasing factor (hpGRF-44; 15 micrograms/h) and to a subsequent bolus injection of hpGRF-44 (2 micrograms) was studied in conscious, freely moving male rats pretreated with antiserum against somatostatin. Within 2 h of the initiation of the hpGRF-44 infusion, plasma GH concentrations rose from 169 +/- 16 to 2465 +/- 307 (+/- SE) ng/ml. By 6 h, plasma GH concentrations began to fall. They decreased slowly and reached a nadir of 490 +/- 107 ng/ml by 12 h. Rats infused for 24 h with hpGRF-44 failed to respond to a 2-micrograms bolus injection (iv) of hpGRF-44, whereas rats infused for 24 h with saline responded with a normal increase in plasma GH. The pituitary GH content of rats treated with saline was significantly greater than that of rats treated with hpGRF-44. These results demonstrate that the capacity of the pituitary to respond to GRF can be exhausted after the chronic administration of hpGRF-44 and that this lack of response appears to be due, in part, to a depletion of pituitary stores of GH.