Optofluidic passive parity-time-symmetric systems

This research introduces a novel methodology of harnessing liquids to facilitate the realization of parity-time (PT)-symmetric optical waveguides on highly integrated microscale platforms. Additionally, we propose a realistic and detailed fabrication process flow, demonstrating the practical feasibility of fabricating our optofluidic system, thereby bridging the gap between theoretical design and actual implementation. Extensive research has been conducted over the past two decades on PT-symmetric systems across various fields, given their potential to foster a new generation of compact, power-efficient sensors and signal processors with enhanced performance. Passive PT-symmetry in optics can be achieved by evanescently coupling two optical waveguides and incorporating an optically lossy material into one of the waveguides. The essential coupling distance between two optical waveguides in air is usually less than 500 nm for near-infrared wavelengths and under 100 nm for ultraviolet wavelengths. This necessitates the construction of the coupling region via expensive and time-consuming electron beam lithography, posing a significant manufacturing challenge for the mass production of PT-symmetric optical systems. We propose a solution to this fabrication challenge by introducing liquids capable of dynamic flow between optical waveguides. This technique allows the attainment of evanescent wave coupling with coupling gap dimensions compatible with standard photolithography processes. Consequently, this paves the way for the cost-effective, rapid and large-scale production of PT-symmetric optofluidic systems, applicable across a wide range of fields.

A statistical method to optimize the chemical etching process of zinc oxide thin films

Zinc oxide (ZnO) is an attractive material for microscale and nanoscale devices. Its desirable semiconductor, piezoelectric and optical properties make it useful in applications ranging from microphones to missile warning systems to biometric sensors. This work introduces a demonstration of blending statistics and chemical etching of thin films to identify the dominant factors and interaction between factors, and develop statistically enhanced models on etch rate and selectivity of c-axis-oriented nanocrystalline ZnO thin films. Over other mineral acids, ammonium chloride (NH₄Cl) solutions have commonly been used to wet etch microscale ZnO devices because of their controllable etch rate and near-linear behaviour. Etchant concentration and temperature were found to have a significant effect on etch rate. Moreover, this is the first demonstration that has identified multi-factor interactions between temperature and concentration, and between temperature and agitation. A linear model was developed relating etch rate and its variance against these significant factors and multi-factor interactions. An average selectivity of 73 : 1 was measured with none of the experimental factors having a significant effect on the selectivity. This statistical study captures the significant variance observed by other researchers. Furthermore, it enables statistically enhanced microfabrication processes for other materials.

Multiphoton Nanosculpting of Optical Resonant and Nonresonant Microsensors on Fiber Tips

This work presents a multiphoton nanosculpting process that is employed to fabricate three-dimensional (3D) mechanically assisted optical resonant and nonresonant microsensors on fiber tips. The resonant microsensor consists of a complex 3D optical cavity design with submicron resolution and advanced micromechanical features including a hinged, multipositional mirror, a 3D spring body to displace this mirror without deforming it, and adhesive-retaining features for sealing the cavity. These features represent a breakthrough in the integration and fabrication capabilities of micro-optomechanical systems. The demonstrated dynamic optical surface enables directional thin-film deposition onto obscured areas. We leverage the rotation of the dynamically movable mirror to deposit a thin reflective coating onto the inner surfaces of a Fabry-Pérot cavity (FPC) with curved geometry. The reflective coating in conjunction with the dynamically rotatable mirror greatly improves the quality factor of the FPC and enables a new class of highly integrated multipurpose sensor systems. A unique spring body FPC on an optical fiber tip is used to demonstrate pressure sensing with a sensitivity of 38 ± 7 pm/kPa over a range of -80 to 345 kPa. The nonresonant microsensor consists of microblades that spin in response to an incident flow. Light exiting the core of the optical fiber is reflected back into the fiber core at a flow-dependent rate as the blades pass by. The fiber tip flow sensor operates successfully over a range of 9-25 LPM using nitrogen gas and achieves a linear response of 706 ± 43 reflections/LPM over a range of 10.9-12 LPM. The nanostructuring technology presented in this work offers a path forward for utilizing 3D design freedom in micromechanically enhanced optical and optofluidic systems to facilitate versatile processing and advantageous geometries beyond the current state-of-the-art.

Comprehensive Optical Strain Sensing Through the Use of Colloidal Quantum Dots

The adaptation of colloidal quantum dots loaded within a polymer for use in nondestructive testing can be used as an optical strain gauge due to the nanomaterial's strain sensing properties. In this paper, we utilized InP/ZnS colloidal quantum dots loaded within a polymer matrix applied onto the surface of a dog-bone foil precoated with an epoxy. By employing an empirical formula and a calibration factor, there is a propinquity between both the calculated optical strain and mechanical stress-strain reference data. Fluctuations are observed, which may be due to both additional strain responses not seen by the mechanical data and quantum dot blinking. These results and methods show the applied use of this novel optical nondestructive testing technique for a variety of structures, especially for structures that operate in harsh environments.

Demonstration of on-chip quantum dot microcavity lasers in a molecularly engineered annular groove

The on-chip quantum dot (QD) microcavity laser engineered on an annular groove made of fused silica was demonstrated based on the external quasi-cavity configuration. By incorporating an appropriate dose of polymer into QD film, the spectral purity of the lasing spectrum was significantly enhanced. In contrast to the dye microcavity laser embedded on the same trench profile, a QD laser possesses a lifetime that is over 10 times longer. We have introduced a unique two-step quantum gain deposition process that has remarkably reduced the wavelength drifts of laser emissions in an aqueous environment by approximately 400%. The reconfigurable cavity platform in combination with an appropriately engineered quantum gain medium embedded onto it promises to enable photostable chip-scale coherent light sources for various photonic, chemical, and biochemical sensing applications.

Effects of edge inclination angles on whispering-gallery modes in printable wedge microdisk lasers

The ink-jet technique was developed to print the wedge polymer microdisk lasers. The characterization of these lasers was implemented using a free-space optics measurement setup. It was found that disks of larger edge inclination angles have a larger free spectral range (FSR) and a lower resonance wavelength difference between the fundamental transverse electric (TE) and transverse magnetic (TM) whispering-gallery modes (WGMs). This behavior was also confirmed with simulations based on the modified Oxborrow's model with perfectly matched layers (PMLs), which was adopted to accurately calculate the eigenfrequencies, electric field distributions, and quality parameters of modes in the axisymmetric microdisk resonators. Combined with the nearly equivalent quality factor (Q-factor) and finesse factor (F-factor) variations, the correlations between the TE and left adjacent TM modes were theoretically demonstrated. When the edge inclination angle is varied, the distinguishable mode distribution facilitates the precise estimation of a resonance wavelength shift. Therefore, the flexible and efficient nature of wedge polymer microdisk lasers extends their potential applications in precision sensing technology.

Evanescent coupling between refillable ring resonators and laser-inscribed optical waveguides

We investigated theoretically and experimentally the evanescent coupling between photonic waveguides of arbitrary shapes and refillable optical ring resonators on the same chip. The resonator hosts were designed to facilitate whispering gallery modes and etched by using a single-mask standard lithography process, whereas the waveguides were imprinted in the proximity of the ring resonator by using 3D ultrafast laser-writing technology. Finite element analysis in conjunction with coupled-mode theory revealed a coupling Q-factor (Q_C) of approximately 10⁶. The polymer core ring resonator exhibited a loaded Q-factor (Q_T) as high as 5.4×10⁴ and a free spectral range (FSR) of 406 pm at a center wavelength of 775 nm. Long-term stability of the ring resonator was repeatedly tested by examining the spectral location of optical resonances and the constancy of Q-factors and FSRs under ambient laboratory conditions for 1 month. We recorded consistent Q-factors and repeatable FSRs for all measurements. Renewability of the polymer core was demonstrated by removing and redepositing the polymer in the cavity, followed by measurements of Q-factors and FSRs. This work promises to enable reconfigurable and renewable photonic devices for on-chip lasers, 3D integrated optical signal processing, chip-scale molecular sensing, and the investigation of new optical phenomena.

Regular oscillations and random motion of glass microspheres levitated by a single optical beam in air: publisher's note

This publisher's note amends a recent publication [Opt. Express24(3), 2850-2857 (2016)] to include Acknowledgments.

Regular oscillations and random motion of glass microspheres levitated by a single optical beam in air

We experimentally report on optical binding of many glass particles in air that levitate in a single optical beam. A diversity of particle sizes and shapes interact at long range in a single Gaussian beam. Our system dynamics span from oscillatory to random and dimensionality ranges from 1 to 3D. The low loss for the center of mass motion of the beads could allow this system to serve as a standard many body testbed, similar to what is done today with atoms, but at the mesoscopic scale.

Reconfigurable Solid-state Dye-doped Polymer Ring Resonator Lasers

This paper presents wavelength configurable on-chip solid-state ring lasers fabricated by a single-mask standard lithography. The single- and coupled-ring resonator hosts were fabricated on a fused-silica wafer and filled with 3,3'-Diethyloxacarbocyanine iodide (CY3), Rhodamine 6G (R6G), and 3,3'-Diethylthiadicarbocyanine iodide (CY5)-doped polymer as the reconfigurable gain media. The recorded lasing threshold was ~220 nJ/mm(2) per pulse for the single-ring resonator laser with R6G, marking the lowest threshold shown by solid-state dye-doped polymer lasers fabricated with a standard lithography process on a chip. A single-mode lasing from a coupled-ring resonator system with the lasing threshold of ~360 nJ/mm(2) per pulse was also demonstrated through the Vernier effect. The renewability of the dye-doped polymer was examined by removing and redepositing the dye-doped polymer on the same resonator hosts for multiple cycles. We recorded consistent emissions from the devices for all trials, suggesting the feasibility of employing this technology for numerous photonic and biochemical sensing applications that entail for sustainable, reconfigurable, and low lasing threshold coherent light sources on a chip.

Monolithic optofluidic ring resonator lasers created by femtosecond laser nanofabrication

We designed, fabricated, and characterized a monolithically integrated optofluidic ring resonator laser that is mechanically, thermally, and chemically robust. The entire device, including the ring resonator channel and sample delivery microfluidics, was created in a block of fused-silica glass using a 3-dimensional femtosecond laser writing process. The gain medium, composed of Rhodamine 6G (R6G) dissolved in quinoline, was flowed through the ring resonator. Lasing was achieved at a pump threshold of approximately 15 μJ mm(-2). Detailed analysis shows that the Q-factor of the optofluidic ring resonator is 3.3 × 10(4), which is limited by both solvent absorption and scattering loss. In particular, a Q-factor resulting from the scattering loss can be as high as 4.2 × 10(4), suggesting the feasibility of using a femtosecond laser to create high quality optical cavities.

Towards biodegradable wireless implants

A new generation of partially or even fully biodegradable implants is emerging. The idea of using temporary devices is to avoid a second surgery to remove the implant after its period of use, thereby improving considerably the patient's comfort and safety. This paper provides a state-of-the-art overview and an experimental section that describes the key technological challenges for making biodegradable devices. The general considerations for the design and synthesis of biodegradable components are illustrated with radiofrequency-driven resistor-inductor-capacitor (RLC) resonators made of biodegradable metals (Mg, Mg alloy, Fe, Fe alloys) and biodegradable conductive polymer composites (polycaprolactone-polypyrrole, polylactide-polypyrrole). Two concepts for partially/fully biodegradable wireless implants are discussed, the ultimate goal being to obtain a fully biodegradable sensor for in vivo sensing.

PZT transduction of high-overtone contour-mode resonators

This paper presents the Butterworth-van Dyke model and quantitative comparison that explore the design space of lead zirconate titanate-only (PZT) and PZT on 3-, 5-, and 10-μm single-crystal silicon (SCS) high-overtone width-extensional mode (WEM) resonators with identical lateral dimensions for incorporation into radio frequency microelectromechanical systems (RF MEMS) filters and oscillators. A novel fabrication technique was developed to fabricate the resonators with and without a silicon carrier layer using the same mask set on the same wafer. The air-bridge metal routings were implemented to carry electrical signals while avoiding large capacitances from the bond-pads. We theoretically derived and experimentally measured the correlation of motional impedance (RX), quality factor (Q), and resonance frequency (f) with the resonators' silicon layer thickness (tSi) up to frequencies of operation above 1 GHz.