Is photoelectrocatalysis an efficient process to degrade endocrine disruptors chemicals?

Endocrine disruptors chemicals (EDCs) pose significant health risks, including cancer, behavioral disorders, and infertility. In this study, we employed the photoelectrocatalysis (PEC) technique with optimized tungsten oxide (WO3) nanostructures as a photoanode to degrade three diverse EDCs: methiocarb, dimethyl phthalate, and 4-tert-butylphenol. PEC degradation tests were carried out for individual contaminants and a mixture of them, assessing efficiency across different EDC families. Ultra High-Performance Liquid Chromatography and Mass Spectrometry was used to control the course of the experiments. For individual solutions, 4-tert-butylphenol and methiocarb were 100% degraded at 1 hour of PEC degradation. Among the tested EDCs, dimethyl phthalate showed the highest resistance to degradation when treated individually. However, when assessed in a mixture with the other EDCs, the degradation efficiency of dimethyl phthalate increased compared to its individual treatment. Furthermore, four degradation intermediates were identified for each contaminant. Finally, toxicity tests revealed that the initial solution was more toxic than the samples treated for all the contaminants tested, except for the phthalate.

Experimental and Theoretical Tests on the Corrosion Protection of Mild Steel in Hydrochloric Acid Environment by the Use of Pyrazole Derivative

In this study, 1,5-diallyl-1H-pyrazolo [3,4-d] pyrimidin-4 (5H)-one (PPD) was evaluated as an anticorrosion agent for mild steel (MS) in 1 M HCl. The analysis was performed by weight loss (WL), potentiodynamic polarization measurement, and electrochemical impedance spectroscopy (EIS). The Tafel polarization showed that PPD is a mixed-type inhibitor and reaches 94% of the protective efficiency at 10^-3 M. EIS results indicated that the resistance to charge transfer increases with increasing inhibitor concentration and the corrosion of MS is controlled by a charge transfer process. The inhibitor adsorption on the MS surface obeyed the Langmuir's adsorption isotherm. Thermodynamic parameters were calculated to elaborate the corrosion inhibition mechanism. The micrographic analysis revealed the existence of a barrier layer on the electrode surface with the presence of PPD. Theoretical examinations performed by electronic/atomic computer simulations confirmed that the obtained results were found to be consistent with experimental findings.

Degradation of Methylparaben Using Optimal WO3 Nanostructures: Influence of the Annealing Conditions and Complexing Agent

In this work, WO₃ nanostructures were synthesized with different complexing agents (0.05 M H₂O₂ and 0.1 M citric acid) and annealing conditions (400 °C, 500 °C and 600 °C) to obtain optimal WO₃ nanostructures to use them as a photoanode in the photoelectrochemical (PEC) degradation of an endocrine disruptor chemical. These nanostructures were studied morphologically by a field emission scanning electron microscope. X-ray photoelectron spectroscopy was performed to provide information of the electronic states of the nanostructures. The crystallinity of the samples was observed by a confocal Raman laser microscope and X-ray diffraction. Furthermore, photoelectrochemical measurements (photostability, photoelectrochemical impedance spectroscopy, Mott-Schottky and water-splitting test) were also performed using a solar simulator with AM 1.5 conditions at 100 mW·cm^-2. Once the optimal nanostructure was obtained (citric acid 0.01 M at an annealing temperature of 600 °C), the PEC degradation of methylparaben (C_O 10 ppm) was carried out. It was followed by ultra-high-performance liquid chromatography and mass spectrometry, which allowed to obtain the concentration of the contaminant during degradation and the identification of degradation intermediates. The optimized nanostructure was proved to be an efficient photocatalyst since the degradation of methylparaben was performed in less than 4 h and the kinetic coefficient of degradation was 0.02 min^-1.

Photoelectrocatalyzed degradation of organophosphorus pesticide fenamiphos using WO3 nanorods as photoanode

In this study, WO₃ nanostructures were synthesized by the electrochemical anodization technique to use them on the degradation of persistent organic compounds such as the pesticide fenamiphos. The acids electrolyte used during the anodization were two different: 1.5 M H₂SO₄ - 0.05 M H₂O₂ and 1.5 M CH₄O₃S - 0.05 M H₂O₂. Once the samples have been manufactured, they have been subjected to different tests to analyze the properties of the nanostructures. With Field Emission Scanning Electron Microscopy (FE-SEM) the samples have been examined morphologically, their composition and crystallinity has been studied through Raman Spectroscopy and their photoelectrochemical behaviour by Photoelectrochemical Impedance Spectroscopy (PEIS). Finally, degradation tests have been carried out using the technique known as photoelectrocatalysis (PEC). The conditions that were applied in this technique were a potential of 1 V_Ag/AgCl and simulated solar illumination. The degradation process was monitored by UV-Visible and High-Performance liquid Chromatography (HPLC) to control the course of the experiment. The nanostructures obtained with 1.5 M CH₄O₃S - 0.05 M H₂O₂ electrolyte showed a better photoelectrochemical behaviour than nanostructures synthesized with 1.5 M H₂SO₄ - 0.05 M H₂O₂. The fenamiphos degradation was achieved at 2 h of experiment and the intermediate formation was noticed at 1 h of PEC experiment.

Photoelectrocatalyzed degradation of a pesticides mixture solution (chlorfenvinphos and bromacil) by WO3 nanosheets

A photoelectrocatalyst consisting of WO₃ nanosheets or nanorods has been synthesized by electrochemical anodization under hydrodynamic conditions, and has been used for the degradation of two toxic pesticides: chlorfenvinphos and bromacil. Nanostructures have been characterized by FESEM and Raman spectroscopy. Photoelectrochemical degradation tests have been carried out both for individual pesticide solutions and for a mixture solution, and the concentration evolution with time has been followed by UV-Vis spectrophotometry. For individual pesticides, pseudo-first order kinetic coefficients of 0.402h^-1 and 0.324h^-1 have been obtained for chlorfenvinphos and bromacil, respectively, while for the mixture solution, these kinetic coefficients have been 0.162h^-1 and 0.408h^-1. The change in behavior towards pesticide degradation depending on whether individual or mixture solutions were used might be indicative of a competitive process between the two pesticide molecules when interacting with the WO₃ nanostructures surface or when approaching the semiconductor/electrolyte interface.

Visible-light photoelectrodegradation of diuron on WO3 nanostructures

The degradation of pesticide diuron has been explored by photoelectrocatalysis (PEC) under visible light illumination using two different WO₃ nanostructures, obtained by anodization of tungsten. The highest degradation efficiency (73%) was obtained for WO₃ nanosheets synthesized in the presence of small amounts of hydrogen peroxide (0.05 M). For that nanostructure, the kinetic coefficient for diuron degradation was 133% higher than that for the other nanostructure (anodized in the presence of fluoride anions). These results have been explained by taking into account the different architecture and dimensions of the two WO₃ nanostructures under study.

A porous Ru nanomaterial as an efficient electrocatalyst for the hydrogen evolution reaction under acidic and neutral conditions

A porous Ru nanomaterial exhibits high electrocatalytic performance and excellent durability for the hydrogen evolution reaction (HER) under both acidic and neutral conditions.

Effect of pH and chloride concentration on the removal of hexavalent chromium in a batch electrocoagulation reactor

In this work, the effect of pH and chloride ions concentration on the removal of Cr(VI) from wastewater by batch electrocoagulation using iron plate electrodes has been investigated. The initial solution pH was adjusted with different concentrations of H(2)SO(4). The presence of chloride ions enhances the anode dissolution due to pitting corrosion. Fe(2+) ions formed during the anode dissolution cause the reduction of Cr(VI) to form Cr(III), which are co-precipitated with Fe(3+) ions at relatively low pH. The reduction degree of Cr(VI) to Cr(III) and the solubility of metal hydroxide species (both chromic and iron hydroxides) depend on pH. At higher concentrations of H(2)SO(4), the reduction of Cr(VI) to Cr(III) by Fe(2+) ions is preferred, but the coagulation of Fe(3+) and Cr(III) is favoured at the lower H(2)SO(4) concentrations.