Novel patient-specific helical maxillary distractor: an in vitro feasibility study

At present, stock linear distractors are used for internal maxillary distraction osteogenesis. However, the authors' research group has demonstrated, through an in silico analysis, that linear distraction leads to bone deformities and malocclusion, whereas helical distraction can yield ideal outcomes. A system for designing and manufacturing custom helical distractors has recently been developed, and the feasibility of these appliances now needs to be assessed. This study was, therefore, conducted to gain an initial insight into their feasibility. The study had two goals. First, it aimed to demonstrate, in an in vitro model, that the novel system of custom helical distraction can produce appropriate clinical outcomes. The second aim was to compare the performance of custom helical distractors with that of stock devices and hybrid devices (i.e., linear appliances that feature patient-specific footplates). Interpreting the results as trends, this study showed that the system of custom helical distraction resulted in in vitro outcomes that were superior to those obtained with stock and hybrid devices.

Helical distraction is superior to linear and circular distraction in mandibular distraction osteogenesis: an in silico study

Helical mandibular distraction is theoretically better than linear or circular distraction. However, it is not known whether this more complex treatment will result in unquestionably better outcomes. Therefore, the best attainable outcomes of mandibular distraction osteogenesis were evaluated in silico, given the constraints of linear, circular, and helical motion. This cross-sectional kinematic study included 30 patients with mandibular hypoplasia who had been treated with distraction, or to whom this treatment had been recommended. Demographic information and the computed tomography (CT) scans showing the baseline deformity were collected. The CT scans of each patient were segmented and three-dimensional models of the face created. Then, the ideal distraction outcomes were simulated. Next, the most favorable helical, circular, and linear distraction movements were calculated. Finally, errors were measured: misalignment of key mandibular landmarks, misalignment of the occlusion, and changes in intercondylar distance. Helical distraction produced trivial errors. In contrast, circular and linear distractions resulted in errors that were statistically and clinically significant. Helical distraction also preserved the planned intercondylar distance, while circular and linear distractions led to unwanted changes in the intercondylar distance. It is now evident that helical distraction offers a new strategy to improve the outcomes of mandibular distraction osteogenesis.

Clinical feasibility of deep learning-based automatic head CBCT image segmentation and landmark detection in computer-aided surgical simulation for orthognathic surgery

The purpose of this ambispective study was to investigate whether deep learning-based automatic segmentation and landmark detection, the SkullEngine, could be used for orthognathic surgical planning. Sixty-one sets of cone beam computed tomography (CBCT) images were automatically inferred for midface, mandible, upper and lower teeth, and 68 landmarks. The experimental group included automatic segmentation and landmarks, while the control group included manual ones that were previously used to plan orthognathic surgery. The qualitative analysis of segmentation showed that all of the automatic results could be used for computer-aided surgical simulation. Among these, 98.4% of midface, 70.5% of mandible, 98.4% of upper teeth, and 93.4% of lower teeth could be directly used without manual revision. The Dice similarity coefficient was 96% and the average symmetric surface distance was 0.1 mm for all four structures. With SkullEngine, it took 4 minutes to complete the automatic segmentation and an additional 10 minutes for a manual touchup. The results also showed the overall mean difference between the two groups was 2.3 mm for the midface and 2.4 mm for the mandible. In summary, the authors believe that automatic segmentation using SkullEngine is ready for daily practice. However, the accuracy of automatic landmark digitization needs to be improved.

New approach to establish an object reference frame for dental arch in computer-aided surgical simulation

The purpose of this study was to develop a principal component analysis-based adaptive minimum Euclidean distances (PAMED) approach to establish an optimal object reference frame for symmetrical alignment of the dental arch during computer-aided surgical simulation (CASS). It was compared with our triangular methods and the standard principal component analysis (PCA) method. Thirty sets of maxillary digital models were used. Midsagittal and occlusal planes were ranked by three experienced evaluators based on their clinical judgment. The results showed that for the midsagittal plane, all three evaluators ranked "ideal" for all 30 models with the PAMED method, 28 with the triangular method, and at least 11 with the PCA method. For the occlusal plane, one evaluator ranked all 30 models "ideal" with both the PAMED and the PCA methods while the other two evaluators ranked all 30 models "ideal" with the triangular method. However, the differences among the three methods were minimal. In conclusion, our PAMED method is the most reliable and consistent approach for establishing the object reference frame for the dental arch in orthognathic surgical planning. The triangular method should be used with caution because it can be affected by dental arch asymmetry. The standard PCA method is not recommended.

Algorithm for planning a double-jaw orthognathic surgery using a computer-aided surgical simulation (CASS) protocol. Part 2: three-dimensional cephalometry

Three-dimensional (3D) cephalometry is not as simple as just adding a 'third' dimension to a traditional two-dimensional cephalometric analysis. There are more complex issues in 3D analysis. These include how reference frames are created, how size, position, orientation and shape are measured, and how symmetry is assessed. The main purpose of this article is to present the geometric principles of 3D cephalometry. In addition, the Gateno-Xia cephalometric analysis is presented; this is the first 3D cephalometric analysis to observe these principles.

The primal sagittal plane of the head: a new concept

To assess facial form, one has to determine the size, position, orientation, shape, and symmetry of the different facial units. Many of these assessments require a frame of reference. The customary coordinate system used for these assessments is the 'standard anatomical frame of reference', a three-dimensional Cartesian system made by three planes: the sagittal, the axial, and the coronal. Constructing the sagittal plane seems simple, but because of universal facial asymmetry, it is complicated. Depending on the method one selects, one can build hundreds of different planes, never knowing which one is correct. This conundrum can be solved by estimating the sagittal plane a patient would have had if his or her face had developed symmetrically. We call this the 'primal sagittal plane'. To estimate this plane we have developed a mathematical algorithm called LAGER (Landmark Geometric Routine). In this paper, we explain the concept of the primal sagittal plane and present the structure of the LAGER algorithm.

Three-dimensional virtual-reality surgical planning and soft-tissue prediction for orthognathic surgery

Complex maxillofacial malformations continue to present challenges in analysis and correction beyond modern technology. The purpose of this paper is to present a virtual-reality workbench for surgeons to perform virtual orthognathic surgical planning and soft-tissue prediction in three dimensions. A resulting surgical planning system, i.e., three-dimensional virtual-reality surgical-planning and soft-tissue prediction for orthognathic surgery, consists of four major stages: computed tomography (CT) data post-processing and reconstruction, three-dimensional (3-D) color facial soft-tissue model generation, virtual surgical planning and simulation, soft-tissue-change preoperative prediction. The surgical planning and simulation are based on a 3-D CT reconstructed bone model, whereas the soft-tissue prediction is based on color texture-mapped and individualized facial soft-tissue model. Our approach is able to provide a quantitative osteotomy-simulated bone model and prediction of postoperative appearance with photorealistic quality. The prediction appearance can be visualized from any arbitrary viewing point using a low-cost personal-computer-based system. This cost-effective solution can be easily adopted in any hospital for daily use.

A comparison of 3 methods of face-bow transfer recording: implications for orthognathic surgery

PURPOSE

The purpose of this study was to compare the occlusal plane inclination of models mounted using 3 different systems for face-bow transfer with the actual occlusal plane inclination as measured on a cephalometric radiograph.

PATIENTS AND METHODS

Twenty-two subjects were enrolled in this study. Three alginate impressions of the maxillary dentition were taken, and 3 stone dental models were produced for each subject. Face-bow recordings were obtained on each subject using the SAM Anatomical Face-bow (Great Lakes Orthodontics Products, Ltd, Tonawanda, NY), the Erickson Surgical Face-bow (Great Lakes Orthodontics Products, Ltd) and a new technique developed by one of the authors (J.G.). For each subject, the dental models were mounted on a SAM articulator using each of the 3 face-bow recordings. Finally, a lateral cephalometric radiograph was obtained for each subject. The occlusal plane inclination was measured on the models and on the cephalometric radiographs. Differences among groups were tested using a 1-way analysis of variance. Bonferroni test was used for post hoc comparison between different pairs of groups.

RESULTS

The average occlusal plane inclination using the SAM Anatomical Face-bow was 7.8 degrees +/- 4.2 degrees greater than the actual-a difference that was statistically significant. The mean occlusal plane inclination of the models obtained using the Erickson Surgical Face-bow was 4.4 degrees +/- 2.2 degrees greater than the actual-a difference that was also statistically significant. The mean occlusal plane inclination of the models obtained by the new technique was only 0.9 degrees +/- 1.2 degrees greater than the actual; this difference was not statistically significant.

CONCLUSIONS

The new mounting technique is more accurate than the conventional SAM Face-bow or the Erickson Face-bow for reproducing the actual occlusal plane inclination.

An in vitro study of the accuracy of a new protocol for planning distraction osteogenesis of the mandible

PURPOSE

The purpose of this study was to determine the in vitro accuracy of a new protocol for distraction osteogenesis of the mandible that involves a planning process and a surgical technique.

MATERIALS AND METHODS

An experimental design was developed to simulate distraction osteogenesis on stereolithographic models of patients with craniofacial deformities. All patients had previously undergone 3-dimensional computerized scans of the craniofacial skeleton. The data from these scans were used to generate stereolithographic models. Before the fabrication of the models, the computed tomography (CT) data were manipulated to add a series of rulers and markers to the models. The 3-dimensional computerized scans were also used as the basis of the planning process. They were imported into an animation software (3D-Studio Max; Discreet, Montreal, Canada), and a virtual distractor was built and installed on the model, and the osteotomies and distraction processes were simulated. Finally, a recipe for sequencing the linear and angular changes of the distractor were calculated. A surgical technique was developed to facilitate the precise installation of the distractor as indicated in the presurgical plan. The transfer of information regarding pin position and orientation from the computer model to the patient was accomplished by creating a surgical template. This template was designed in the computer and fabricated by use of stereolithography. Mock surgery was performed on the stereolithographic models, and the results were compared with those predicted by the computer. The difference between the actual position and the predicted position was recorded.

RESULTS

On the X-axis, the difference between the predicted position for the condylar marker and the actual position of the marker on the stereolithographic models was 0.6 +/- 1.1 mm. On the Y-axis, the difference between the predicted position for the condylar marker and the actual position of the marker on the stereolithographic models was -0.9 +/- 2.6. On the Z-axis, the difference between the predicted position for the condylar marker and the actual position of the marker on the stereolithographic models was 0.04 +/- 0.8 mm. There was excellent correlation between the predicted and the actual measurements for the X, Y, and Z axes: 0.98, 0.93, and 0.98, respectively.

CONCLUSIONS

The results indicate that the combination of this planning process and surgical technique was very accurate. This in vitro study is the first step in determining the clinical usefulness of this protocol. If the results of this study are validated in clinical practice, this protocol will allow clinicians to improve the clinical outcomes of patients treated with distraction osteogenesis.

The use of ultrasound to determine the position of the mandibular condyle

A randomized, single blind study of 20 patients examined the accuracy of ultrasound in establishing the position of the mandibular condyle in relation to the glenoid fossa. The sonographic technique is described. The temporomandibular joint was imaged sonographically with the patients in an open- and a closed-mouth position as a model for condylar sag and proper condylar seating, respectively, during mandibular ramus osteotomy procedures. One radiologist identified condylar position correctly in 38 of 40 still ultrasound images, with a sensitivity and a specificity of 95%. During real time ultrasound examination, it is possible to visualize varying degrees of condylar movement in relation to the glenoid fossa. The results of this study support the potential use of ultrasound as an adjunct to mandibular orthognathic surgery.

Holmium:YAG laser arthroscopy of the temporomandibular joint

A new pulsed midinfrared laser has become available for use in arthroscopic surgery of the temporomandibular joint (TMJ). This article reviews holmium:YAG (yttrium-aluminum-garnet) laser physics, its tissue effects, and reports initial experience with its use in TMJ arthroscopy. Because the Ho:YAG laser can precisely and rapidly resect cartilaginous tissues with only moderate necrosis, can function in a saline environment, and can be transmitted through conventional optical fibers, it has the potential of becoming a useful and adaptable system for TMJ arthroscopic surgery.