O014 Oxidised zirconium versus cobalt-chrome femoral heads in total hip arthroplasty: a multi-centre prospective double-blinded randomised controlled trial with 10-years follow-up

Introduction

This study reports the ten-year polyethylene liner wear rates, incidence of osteolysis, clinical outcomes and complications of a three-arm, multicentre randomised controlled trial comparing Cobalt-Chrome (CoCr) and Oxidised Zirconium (OxZr) femoral heads with ultra-high molecular weight polyethylene (UHMWPE) versus highly cross-linked polyethylene(XLPE) liners in total hip arthroplasty (THA).

Methods

Patients undergoing THA from four institutions were prospectively randomised into three groups. Group A received a CoCrfemoral head and XLPE liner; Group B received an OxZrfemoral head and XLPE liner; and Group C received an OxZr femoral head and UHMWPE liner. Patients and observers recording study outcomes were blinded to the treatment groups at each follow-up interval. The outcomes of 262 study patients were analysed at ten years follow-up after THA.

Results

At ten years follow-up, increased linear wear rates were recorded in group C compared to group A (0.133 ± 0.21 mm/yr vs 0.031 ± 0.07 mm/yr respectively, p<0.001) and group B (0.133 ± 0.21 mm/yr vs 0.022 ± 0.05 mm/yr respectively, p<0.001). Patients in group C were associated with increased risk of osteolysis and aseptic loosening requiring revision surgery compared with group A (7/133 vs 0/133 respectively, p=0.007) and group B (7/133 vs 0/135 respectively, p=0.007).

Conclusion

The use of UHMWPE was associated with progressively increased annual liner wear rates after THA. At ten years follow-up, this translated to UHMWPE leading to an increased incidence of osteolysis and aseptic loosening requiring revision THA, compared with XLPE.

Take-home message

THA using XLPE liners is associated with improved long-term implant survivorship and reduced revision surgery compared with UHMWPE liners at long-term follow-up.

Maternal knowledge on early childhood caries and barriers to seek dental treatment in Jordan

Purpose

To assess maternal knowledge, attitudes and beliefs of Early Childhood Caries (ECC) risk factors and to determine barriers in seeking dental treatment among children with ECC.

Methods

A total of 600 mothers of healthy children, aged 3–5 years, with ECC attending maternity and child health centres in Jordan completed a questionnaire using face-to-face interviews. ECC was diagnosed clinically by the chief investigator, based on the diagnostic criteria suggested by American Academy of Paediatric Dentistry (AAPD), and caries was recorded using dmft index.

Results

The majority of the children had poor oral health status (99.2%) with a dmft index of 6.04 (± 1.2). Less than third (25.7%) of the mothers believed that their child had poor oral health with more than half (53.3%) not being aware that their child had dental caries. Most of the mothers had poor knowledge, attitudes and beliefs regarding their children’s oral health (82%). Participants` oral health knowledge was significantly associated with mothers` level of education and profession (p < 0.05). In addition, there was delay in seeking dental treatment for their children by the majority (65.9%) of mothers. Maternal profession, family income and time needed to reach a nearby health centre were found to be significant barriers in seeking dental treatment (p < 0.05).

Conclusion

The majority of the mothers of children in Jordan with ECC had poor knowledge about their children’s oral health status. Moreover, seeking dental treatment was delayed by a large number of mothers of children with ECC.

An assessment of early functional rehabilitation and hospital discharge in conventional versus robotic-arm assisted unicompartmental knee arthroplasty: a prospective cohort study

AIMS

The objectives of this study were to compare postoperative pain, analgesia requirements, inpatient functional rehabilitation, time to hospital discharge, and complications in patients undergoing conventional jig-based unicompartmental knee arthroplasty (UKA) versus robotic-arm assisted UKA.

PATIENTS AND METHODS

This prospective cohort study included 146 patients with symptomatic medial compartment knee osteoarthritis undergoing primary UKA performed by a single surgeon. This included 73 consecutive patients undergoing conventional jig-based mobile bearing UKA, followed by 73 consecutive patients receiving robotic-arm assisted fixed bearing UKA. All surgical procedures were performed using the standard medial parapatellar approach for UKA, and all patients underwent the same postoperative rehabilitation programme. Postoperative pain scores on the numerical rating scale and opiate analgesia consumption were recorded until discharge. Time to attainment of predefined functional rehabilitation outcomes, hospital discharge, and postoperative complications were recorded by independent observers.

RESULTS

Robotic-arm assisted UKA was associated with reduced postoperative pain (p < 0.001), decreased opiate analgesia requirements (p < 0.001), shorter time to straight leg raise (p < 0.001), decreased number of physiotherapy sessions (p < 0.001), and increased maximum knee flexion at discharge (p < 0.001) compared with conventional jig-based UKA. Mean time to hospital discharge was reduced in robotic UKA compared with conventional UKA (42.5 hours (sd 5.9) vs 71.1 hours (sd 14.6), respectively; p < 0.001). There was no difference in postoperative complications between the two groups within 90 days' follow-up.

CONCLUSION

Robotic-arm assisted UKA was associated with decreased postoperative pain, reduced opiate analgesia requirements, improved early functional rehabilitation, and shorter time to hospital discharge compared with conventional jig-based UKA.

The learning curve associated with robotic-arm assisted unicompartmental knee arthroplasty

Aims

The primary aim of this study was to determine the surgical team’s learning curve for introducing robotic-arm assisted unicompartmental knee arthroplasty (UKA) into routine surgical practice. The secondary objective was to compare accuracy of implant positioning in conventional jig-based UKA versus robotic-arm assisted UKA.

Patients and Methods

This prospective single-surgeon cohort study included 60 consecutive conventional jig-based UKAs compared with 60 consecutive robotic-arm assisted UKAs for medial compartment knee osteoarthritis. Patients undergoing conventional UKA and robotic-arm assisted UKA were well-matched for baseline characteristics including a mean age of 65.5 years (sd 6.8) vs 64.1 years (sd 8.7), (p = 0.31); a mean body mass index of 27.2 kg.m2 (sd 2.7) vs 28.1 kg.m2 (sd 4.5), (p = 0.25); and gender (27 males: 33 females vs 26 males: 34 females, p = 0.85). Surrogate measures of the learning curve were prospectively collected. These included operative times, the Spielberger State-Trait Anxiety Inventory (STAI) questionnaire to assess preoperative stress levels amongst the surgical team, accuracy of implant positioning, limb alignment, and postoperative complications.

Results

Robotic-arm assisted UKA was associated with a learning curve of six cases for operating time (p < 0.001) and surgical team confidence levels (p < 0.001). Cumulative robotic experience did not affect accuracy of implant positioning (p = 0.52), posterior condylar offset ratio (p = 0.71), posterior tibial slope (p = 0.68), native joint line preservation (p = 0.55), and postoperative limb alignment (p = 0.65). Robotic-arm assisted UKA improved accuracy of femoral (p < 0.001) and tibial (p < 0.001) implant positioning with no additional risk of postoperative complications compared to conventional jig-based UKA.

Conclusion

Robotic-arm assisted UKA was associated with a learning curve of six cases for operating time and surgical team confidence levels but no learning curve for accuracy of implant positioning. Cite this article: Bone Joint J 2018;100-B:1033–42.

Robotic-arm assisted total knee arthroplasty is associated with improved early functional recovery and reduced time to hospital discharge compared with conventional jig-based total knee arthroplasty: a prospective cohort study

Aims

The objective of this study was to compare early postoperative functional outcomes and time to hospital discharge between conventional jig-based total knee arthroplasty (TKA) and robotic-arm assisted TKA.

Patients and Methods

This prospective cohort study included 40 consecutive patients undergoing conventional jig-based TKA followed by 40 consecutive patients receiving robotic-arm assisted TKA. All surgical procedures were performed by a single surgeon using the medial parapatellar approach with identical implant designs and standardized postoperative inpatient rehabilitation. Inpatient functional outcomes and time to hospital discharge were collected in all study patients.

Results

There were no systematic differences in baseline characteristics between the conventional jig-based TKA and robotic-arm assisted TKA treatment groups with respect to age (p = 0.32), gender (p = 0.50), body mass index (p = 0.17), American Society of Anesthesiologists score (p = 0.88), and preoperative haemoglobin level (p = 0.82). Robotic-arm assisted TKA was associated with reduced postoperative pain (p < 0.001), decreased analgesia requirements (p < 0.001), decreased reduction in postoperative haemoglobin levels (p < 0.001), shorter time to straight leg raise (p < 0.001), decreased number of physiotherapy sessions (p < 0.001) and improved maximum knee flexion at discharge (p < 0.001) compared with conventional jig-based TKA. Median time to hospital discharge in robotic-arm assisted TKA was 77 hours (interquartile range (IQR) 74 to 81) compared with 105 hours (IQR 98 to 126) in conventional jig-based TKA (p < 0.001).

Conclusion

Robotic-arm assisted TKA was associated with decreased pain, improved early functional recovery and reduced time to hospital discharge compared with conventional jig-based TKA.

Cite this article: Bone Joint J 2018;100-B:930–7.

A functional comparison of medial pivot and condylar knee designs based on patient outcomes and parameters of gait

Aims

The outcome of total knee arthroplasty (TKA) is not always satisfactory. The purpose of this study was to identify satisfaction and biomechanical features characterising the gait of patients who had undergone TKA with either an anatomical single radius design or a medial pivot design. We hypothesised that the latter would provide superior function.

Patients and Methods

This is a study of a subset of patients recruited into a prospective randomised study of a single radius design versus a medial pivot design, with a minimum follow-up of one year. Outcome measurements included clinical scores (Knee Society Score (KSS) and Oxford Knee Score (OKS)) and gait analysis using an instrumented treadmill.

Results

There was no statistically significant difference between the two groups for both the KSS and OKS. There was also no statistical significance in cadence, walking speed, stride length and stance time, peak stride, mid support and push-off forces.

Conclusion

This study corroborates a previous study by the same authors that showed equally good results in clinical outcome and gait between the conventional single radius and medial pivot designs under stringent testing conditions.

Cite this article: Bone Joint J 2018;(1 Supple A)100-B:76–82.

Vitamin D Deficiency Is Associated With Longer Hospital Stay And Lower Functional outcome After Total Knee Arthroplasty

High vitamin D deficiency prevalence has been found in hip and knee osteoarthritis, and a correlation between low vitamin D levels and worse functional outcome after hip arthroplasty was published before. Our goal was to examine the relation between vitamin D levels and outcome after knee arthroplasty on short and long term. In 138 patients with knee replacements preoperative vitamin D levels were recorded. 33 patients were vitamin D deficient (median 32 nmol/l, range 6-40 nmol/l) and 105 patients were vitamin D sufficient (median 65 nmol/l, range 41-177 nmol/l). After correction for confounders, vitamin D deficient patients had significant (p = 0.03) longer hospital stay (+1.0 day, range 0.2-1.6 day), and significant (p = 0.04) worse functional outcome also at long term follow up after eight years (WOMAC : +5.0, range 0.2-9.8). More research is needed to evaluate if rehabilitation and postoperative outcome can be improved by preoperative vitamin D suppletion.

A prospective comparative study of cementless total hip arthroplasty and hip resurfacing in patients under the age of 55 years: a ten-year follow-up

The aim of this study was to evaluate the ten-year clinical and functional outcome of hip resurfacing and to compare it with that of cementless hip arthroplasty in patients under the age of 55 years. Between 1999 and 2002, 80 patients were enrolled into the study: 24 were randomised (11 to hip resurfacing, 13 to total hip arthroplasty), 18 refused hip resurfacing and chose cementless total hip arthroplasty with a 32 mm bearing, and 38 insisted on resurfacing. The mean follow-up for all patients was 12.1 years (10 to 14). Patients were assessed clinically and radiologically at one year, five years and ten years. Outcome measures included EuroQol EQ5D, Oxford, Harris hip, University of California Los Angeles and University College Hospital functional scores. No differences were seen between the two groups in the Oxford or Harris hip scores or in the quality of life scores. Despite a similar aspiration to activity pre-operatively, a higher proportion of patients with a hip resurfacing were running and involved in sport and heavy manual labour after ten years. We found significantly higher function scores in patients who had undergone hip resurfacing than in those with a cementless hip arthroplasty at ten years. This suggests a functional advantage for hip resurfacing. There were no other attendant problems.

Five-year comparison of wear using oxidised zirconium and cobalt–chrome femoral heads in total hip arthroplasty

Oxidised zirconium (OxZi) has been developed as an alternative bearing surface for femoral heads in total hip arthroplasty (THA). This study has investigated polyethylene wear, functional outcomes and complications, comparing OxZi and cobalt–chrome (CoCr) as part of a three-arm, multicentre randomised controlled trial. Patients undergoing THA from four institutions were prospectively randomised into three groups. Group A received a CoCr femoral head and highly cross-linked polyethylene (XLPE) liner; Group B received an OxZi femoral head and XLPE liner; Group C received an OxZi femoral head and ultra-high molecular weight polyethylene (UHMWPE) liner. At five years, 368 patients had no statistically significant differences in short-form-36 (p = 0.176 mental, p = 0.756 physical), Western Ontario and McMaster Universities Osteoarthritis Index (p = 0.847), pain scores (p = 0.458) or complications. The mean rate of linear wear was 0.028 mm/year (standard deviation (sd) 0.010) for Group A, 0.023 mm/year (sd 0.010) for Group B, and 0.09 mm/year (sd 0.045) for Group C. Penetration was significantly higher in the UHMWPE liner group compared with both XLPE liner groups (p < 0.001) but no significant difference was noted between CoCr and OxZi when articulating with XLPE (p = 0.153). In this, the largest randomised study of this bearing surface, it appears that using a XLPE acetabular liner is more important in reducing THA component wear than the choice of femoral head bearing, at mid-term follow-up. There is a non-significant trend towards lower wear, coupling OxZi rather than CoCr with XLPE but long-term analysis is required to see if this observation changes with time and becomes significant.

Cite this article: Bone Joint J 2015;97-B:883–9.

Effect of a calcium carbonate-based toothpaste with 0.3% triclosan on pH changes in dental plaque in vivo

The effects of a calcium carbonate-based toothpaste with added 0.3% triclosan on the pH of human dental plaque after a cariogenic challenge with 10% sucrose solution was investigated against a calcium carbonate-based toothpaste without triclosan and an alumina-based toothpaste. A silica-based toothpaste served as a control. Twenty adult volunteers were included in this study. The results showed that the plaque pH drop and the area under the curve for both calcium carbonate-based toothpastes, with and without 0.3% triclosan, were significantly less as compared with the alumina-based toothpaste, with both parameters being least for the toothpaste with added 0.3% triclosan. Calcium carbonate has been shown in previous studies to have a buffering effect on the plaque pH after an acidogenic challenge. The addition of 0.3% triclosan to the calcium carbonate-based toothpaste seemed to enhance this effect.