The Use of Ultrasonication to Aid Recellularization of Acellular Natural Tissue Scaffolds for Use in Anterior Cruciate Ligament Reconstruction

Tissue engineering offers a promising solution to the replacement of anterior cruciate ligament. A decellularized porcine patella tendon scaffold was produced by immersing whole tissues sequentially in hypotonic buffer, 0.1% (w/v) sodium dodecyl sulfate (SDS) in hypotonic buffer, and nuclease solution prior to sterilization with 0.1% (w/v) peracetic acid. Initial studies revealed that primary human tenocytes would attach to, but failed to penetrate into, the decellularized scaffold. A novel use of ultrasonication was therefore developed to allow extrinsic cells to migrate into the acellular scaffold. Various intensities of ultrasonication were tested in order to produce a microscopically more open porous matrix without damaging the overall architecture of the scaffold. Ultrasonication treatment with the intensity of 360 W and a pulse time of 1 s for a total of 1 min was found to be the optimal treatment. This process did not have a significant effect upon the biochemical constituents (collagen, glycosaminoglycans), nor did it denature the collagen. Moreover, the acellular sonicated scaffold retained the essential biomechanical characteristics of the native tissue. Primary human tenocytes penetrated into the center of whole acellular sonicated scaffolds over a 3-week period in static culture. The viability of the cells in the center of the scaffold (depth of circa 2.5 mm) was, however, compromised. To circumvent the problem of nutrient limitation, acellular sonicated scaffolds were split into fascicular scaffolds (500 mum thick). Cells seeded onto the fascicular scaffolds penetrated throughout the scaffold and remained viable after 3 weeks of culture. This study has shown that an acellular biocompatible tendon scaffold can be produced using 0.1% (w/v) SDS and that ultrasonication can provide a novel method to enhance the recellularization of decellularized natural tissues.

The influence of molecular weight, crosslinking and counterface roughness on TNF-alpha production by macrophages in response to ultra high molecular weight polyethylene particles

The response of murine macrophages to clinically relevant polyethylene wear particles generated from different polyethylenes at various time points and volumetric doses in vitro was evaluated. Clinically relevant ultra high molecular weight polyethylene (UHMWPE) wear debris was generated in vitro in a lubricant of RPMI 1640 supplemented with 25% (v/v) foetal calf serum using a multi-directional pin-on-plate wear rig under sterile conditions. Wear debris was cultured with C3H murine peritoneal macrophages at various particle volume (microm(3)): cell number ratios. The secretion of TNF-alpha was determined by ELISA. Initially the effect of molecular weight of UHMWPE was considered. Higher molecular weight GUR415HP was shown to have a lower wear rate than the lower molecular weight GUR1120, however a greater volume of the wear debris produced by the high molecular weight GUR415HP was in the 0.1-1.0 microm size range. Wear debris from GUR415HP produced significant levels of TNF-alpha at a concentration of 1 microm(3)/cell while at least 10 microm(3)/cell of GUR1120 wear debris per cell was needed to produce significant levels of TNF-alpha. Secondly the effects of crosslinking GUR1050 was examined when worn against a scratched counterface. The wear rate of the material was shown to decrease as the level of crosslinking increased. However the materials crosslinked with 5 and 10 Mrad of gamma irradiation produced higher percentages of 0.1-1.0 microm size wear particles than the non-crosslinked material. While the crosslinked material was able to stimulate cells to produce significantly elevated TNF-alpha levels at a particle concentration of just 0.1 microm(3)/cell only concentrations of 10 microm(3)/cell and above of the non-crosslinked wear debris were stimulatory. When the counterface was changed from scratched to smooth the wear rate for all three GUR1050 materials was further reduced. For the first time nanometre size wear particles were observed from polyethylene which reduced the percentage mass of debris in the 0.1-1.0 microm size range. For all three materials on the smooth counterface only concentrations of 50 microm(3)/cell and above were stimulatory. This study has demonstrated that molecular weight, crosslinking and counterface roughness are important factors in determining the biological activity of polyethylene.