Exploring the potential of steel slag waste for carbon sequestration through mineral carbonation: A comparative study of blast-furnace slag and ladle slag

Steel slag is a by-product of steelmaking which has emerged as a potential CO2 sequestration material due to its high reactivity and abundance. This research investigates the use of steel slag waste for the direct capture of carbon from air and its storage through mineral carbonation. Two abundant wastes, blast-furnace slag (BFS) and ladle slag (LS), were tested for their carbon sequestration potential, and the effects of operational parameters such as reaction time between CO2 and slag waste, temperature, liquid-solid ratio, and pressure on CO2 sequestration were determined. Quantitative and qualitative results reveal that much higher CO2 sequestration was achieved using LS compared to BFS after exposure to CO2 for 1 day at room temperature. By increasing the exposure time to four days, levels of CO2 sequestration increased gradually from 2.71% to 4.19% and 23.46%-28.21% for BFS and LS respectively. Increasing the temperature from 20 ± 2 °C to 90 ± 2 °C positively influenced CO2 sequestration in BFS, resulting in an enhancement from 3.45% to 13.21%. However, the impact on LS was insignificant, with sequestration levels rising from 27.72% to 29.90%. Moreover, better CO2 sequestration was observed for BFS than LS when the liquid-to-solid ratio increased from 3:1 to 4:1, whereupon the sequestration potential reached approximately 15% for BFS and 30% for LS at 90 ± 2 °C. Meanwhile, higher pressure reduced the sequestration potential of slag. The results of this study suggest that there is potential for scaling up the process to industrial applications and contributing to the reduction of CO2 emissions in the steelmaking industry.

Application of Water-Soluble Polymer/Biopolymer Combined with a Biosurfactant in Oil-Wet Fractured Carbonate Reservoirs

Most fractured carbonate reservoirs are characterized by a highly permeable fracture zone surrounded by a low-permeability oil-wet matrix. These features make the displacement of oil from the matrix into the fracture zone almost impossible during water flooding. This paper presents the results of flooding with the polymer polyacrylamide (PAM) and the biopolymer xanthan gum (XG) in combination with a biosurfactant to enhance water imbibition into oil-wet fractured carbonate rocks. Core flooding experiments were conducted on induced horizontally fractured (at 180°) carbonate cores in room conditions (20 ± 2 °C). The polymer or biopolymer was used to plug the fracture zones, while the biosurfactant was added to the system to alter the wettability state of the rock matrix from oil-wet to water-wet. Rock surface characterization before and after core flooding was conducted using scanning electron microscopy (SEM). The results indicate that PAM flooding led to a higher reduction of 35.6% in fracture-matrix permeability than that with XG at 18.3%. The monitoring of oil production also showed that ultimate oil recovery levels from oil-wet fractured carbonate cores for the aforementioned systems were 16 and 8.7%, respectively, which can be attributed to the drive mechanisms of temporary fracture plugging as well as mobility ratio improvement due to the polymer and wettability alteration by the biosurfactant. SEM images confirm the proposed mechanisms, where the presence of the polymer/biopolymer followed by the biosurfactant can be detected at the rock surface as a result of chemical flow through the system.