Investigating the Influence of Alkyl Chain Length in Poly(3-alkylthiophene)s Over the Thin Film Morphology by Optical and Electrical Characterization

This paper studies the influence of alkyl-chain length in poly(3-alkylthiophene)s over the morphology of thin films and electrical parameters of the devices based on it. Regioregular poly(3-hexylthiophene) and poly(3-octylthiophene) were chosen as the semiconducting materials for the study. The morphological variations were studied by absorption spectroscopy, photoluminescence spectroscopy and X-ray diffraction study. The absorption and photoluminescence showed decreased coplanarity of main chain in poly(3-octylthiophene) over poly(3-hexylthiophene) and which was later confirmed using X-ray diffraction studies which clearly showed increased interchain spacing in case of poly(3-octylthiophene). The schottky diodes fabricated using these materials showed decreased mobility in poly(3-octylthiophene) based diodes as measured by space-charge limiting current method and photo-induced charge carrier extraction by linearly increasing voltage technique. Moreover, we observed a negative field dependence of mobility at room temperature in both the devices and attributed this to the presence of dominant positional disorder in poly(3-alkylthiophene)s. Furthermore, the photocurrent dependence on electric field too showed inferior mobility of poly(3-octylthiophene) based diodes.

Observation of Room Temperature Photoluminescence from Asymmetric CuGaO2/ZnO/ZnMgO Multiple Quantum Well Structures

Asymmetric (CuGaO2/ZnO/ZnMgO) and symmetric (ZnMgO/ZnO/ZnMgO) multiple quantum well (MQW) structures were successfully fabricated using pulsed laser deposition (PLD) and their comparison were made. Efficient room temperature photoluminescent (PL) emission was observed from these MQWs and temperature dependent luminescence of asymmetric and symmetric MQWs can be explained using the existing theories. A systematic blue shift was observed in both MQWs with decrease in the confinement layer thickness which could be attributed to the quantum confinement effects. The PL emission from asymmetric and symmetric MQW structures were blue shifted compared to 150 nm thick ZnO thin film grown by PLD due to quantum confinement effects.

Role of Al doping in structural, microstructural, electrical and optical characteristics of as-deposited and annealed ZnO thin films

Aluminium dopant segregation from AD-xAZO thin films on annealing is established by structural, optical and electrical characterizations.

Band offset at TiO2/MDMO PPV and TiO2/PEDOT PSS interfaces studied using photoelectron spectroscopy

We report band alignment and band offset studies across the interfaces of hetero-structures of TiO₂ with MDMO PPV and PEDOT PSS using photoelectron spectroscopy.

Near white light emission from ZnO nanostructures

We report white light emission from ZnO nanostructures in powder form, prepared by microwave irradiation-assisted chemical synthesis, in the presence of a structure directing agent. Determination of their crystallinity, actual shape, and orientation was made using X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and optical properties have been studied through photoluminescence (PL), measured using He-Cd laser (325 nm) as the excitation source. There is a noticeable variation in the luminescence correlated with variation of process parameters, such as microwave power, duration of irradiation, and the type/concentration of surfactants. The CIE (Commission Internationale l’Eclairage) diagram shows that the luminescence lies in yellow region of the color space. As the luminescence from the powder of ZnO lies in the yellow region, it is possible to produce white light from the powder of ZnO by using a blue laser as the excitation source.

Nano-engineering by implanting Al2O3 nano particle as sandwiched scattering centers in between the Lao.5Pr0.2Sr0.3MnO3 thin film layers

We report the use of non-magnetic Al2O3 nano particles deposited between two ferromagnetic La0.5Pr0.2Sr0.3MnO3 (LPSMO) manganite layers with an aim to improve the electronic and magnetotransport properties of the layered supper lattice grown on single crystal STO(100) substrate using Pulsed Laser Deposition (PLD) technique. We studied the electronic-transport and magnetotransport properties of this system wherein Al2O3 particles are expected to act as insulating scattering centers between two ferromagnetic LPSMO layers. The scattering due to additional scattering centers (insulating Al2O3 nano particles) could be controlled by application of external field, resulting in high magnetoresistance (MR) approximately 72% as compared to pristine LPSMO film (MR approximately 51%) at temperature close to their T(M) values. In addition, incorporation of nanostructured Al2O3 barrier between the two ferromagnetic LPSMO layers results in a 2-3 fold increase in the values of temperature coefficient of resistance (TCR) and the field coefficient of resistance (FCR) as compared to pristine LPSMO film, suggesting the use of such nanoengineered manganite layered structure for better device application.

In vitro occlusion of human fallopian tubes with Nd:YAG laser

BACKGROUND

There is a need for an atraumatic, fast, reliable, inexpensive, reversible-on-demand method for female sterilization which is also free from side-effects. The use of an Nd:YAG laser for occlusion of human fallopian tubes in vitro was assessed for achieving these aims.

METHODS

An in vitro study was performed on coagulation of fallopian tube tissue using continuous wave Nd:YAG laser. Posthysterectomy human uteri were exposed to laser radiation either directly through an optical fibre or through a sapphire contact probe at the ostia at different laser powers and inter-action times.

RESULTS

Laser-induced tissue coagulation plugged the ostia in a clean, controlled and predictable manner. Microscopic examination of the coagulated tissue showed about 50 microns wide blind holes without any continuous channel; thus eliminating the possibility of passage of sperms through such a plug. The depth of coagulation along the lumen of the fallopian tubes increased linearly with the interaction time of the laser beam at a constant power, either by direct irradiation or through a contact probe. The maximum depth of coagulation was found to be about 3 mm in case of direct irradiation at a laser power of about 6.5 W and interaction time of 50 seconds. Beyond these values, charring occurred at the surface of the tissue.

CONCLUSION

Nd:YAG laser might be a suitable means for female sterilization. Further studies in experimental and clinical settings would be required to confirm its utility.

Occlusion of human fallopian tubes using a carbon dioxide laser-in vitro investigations

The fallopian tube ostium can be occluded by laser coagulation. The penetration depth of an Nd:YAG laser of wavelength 1.06 μm is about three times more than that of a CO₂ laser of wavelength 10.6 μm in the fallopian tube tissue but for deep coagulation, diffusion of the heat through the tissue plays a more Important role. Using a cw-CO₂ Iaser, a coagulation depth of more than 1 mm is achieved in the interstitial fallopian tube near the uterine-oviduct junction at the laser power of 1 W and interaction time of 20 sec. Thermal analysis of the fallopian tube tissue revealed that the maximum temperature attained during coagulation was 105°C. The coagulated tissue was free from microholes. This in vitro experimental investigation indicates that it may be possible to perform female sterilization quickly and atraumatically using lasers via a hysteroscope.