The effects of forest harvest operations on mercury and methylmercury in two boreal streams: relatively small changes in the first two years prior to site preparation

Forest harvest is hypothesized to increase the mercury (Hg) load in aquatic ecosystems. The Balsjö paired catchment study examined the outputs of methylmercury (MeHg) and total mercury (Hg(tot)) from two boreal catchments during the 2 y following forest harvest but prior to site preparation. This enabled us to separate the effect of the two operations that followed best management practices. Hg(tot) concentrations increased by approximately 15%, and fluxes by 20-30%. The MeHg concentrations and fluxes either declined or increased by up to 60%, depending on whether annual MeHg peaks during summer low flows were considered to have been influenced by forest harvest. The lack of a severalfold increase in Hg outputs after forest harvest, as reported from other sites, may be the result of minimal soil disturbance during the winter forest harvest operations. If so, there may be a greater Hg response after soil scarification to prepare for planting.

Assessing the stability of mercury and methylmercury in a varved lake sediment deposit

Using lake sediments to infer past total mercury and methylmercury loading to the environment requires that diagenetic processes within the sediment do not significantly affect the concentrations or net accumulation rates of the mercury species. Because carbon is lost during early sediment diagenesis, the close link between carbon and mercury raises the question of how reliable lake sediments are as archives of total mercury and methylmercury loading. In this study we used a series of freeze cores taken in a lake with varved (annually laminated) sediment to assess the stability of total mercury and methylmercury over time. By tracking material deposited in specific years in cores collected in different years, we found that despite a 20--25% loss of carbon in the first 10--15 years, there was no apparent loss of total mercury over time; hence, lake sediments can be considered as reliable archives. However, over the first 5--8 years after sedimentation, about 30--40% of the methylmercury was lost (a decrease of 0.025--0.030 microg MeHg m(-2) yr(-1)), suggesting that sediment profiles showing increasing methylmercury concentrations toward the sediment surface are in large part an artifact of diagenetic processes (net demethylation), rather than a record of changes in methylmercury loading.

Do potential methylation rates reflect accumulated methyl mercury in contaminated sediments?

Relationships between the short-term mono-methyl mercury (MeHg) production, determined as the specific, potential methylation rate constant Km (day(-1)) after 48 h of incubation with isotope-enriched 201Hg(II) at 23 degrees C, and the long-term accumulation of ambient MeHg, were investigated in contaminated sediments. The sediments covered a range of environments from small freshwater lakes to large brackish water estuaries and differed with respect to source and concentration of Hg, salinity, primary productivity, quantity and quality of organic matter, and temperature climate. Significant (p < 0.001), positive relationships were observed between Km (day(-1)) and the concentration of MeHg normalized to total Hg (%MeHg) for surface sediments (0-10, 0-15, and in one case 0-20 cm) across all environments, and across subsets of organic and minerogenic freshwaters. This suggests that the methylation process (MeHg production) overruled demethylation and net transport processes in the surface sediments. The lack of a relationship between Km and %MeHg in two brackish water sediment depth profiles (0-100 cm) indicates that demethylation and the net effect of input-output are relatively more important at greater depths. Differences in the primary production and subsequent availability of easily degradable organic matter (serving as electron donor for methylating bacteria) was indicated to be the most important factor behind observed differences in %MeHg and Km among sites. In contrast, concentrations of sulfate were not correlated to Km, %MeHg, or absolute concentrations of MeHg. We conclude that total concentrations of Hg are of importance for the long-term accumulation of MeHg, and that %MeHg in surface sediments can be used as a proxy for the rate of methylation, across a range of sites from different environments.

Recent advances in mercury speciation analysis with focus on spectrometric methods and enriched stable isotope applications

This paper discusses some recent advances in spectrometric methods and approaches for mercury speciation analysis of environmental samples with focus on isotope dilution techniques for determination of mercury species' concentrations in gaseous samples and reaction rates in soils and sediments. Such analytical data is important inter alia in fundamental research on mercury biogeochemistry and for risk assessments of mercury-contaminated soils and sediments and for designing effective remedial actions. The paper describes how the use of enriched stable isotope tracers in mercury speciation analysis can improve the traceability and accuracy of results, facilitate rational method developments, and be useful for studying biogeochemical processes, i.e. rate of reactions and fluxes, of mercury species. In particular the possibilities to study and correct for unwanted species transformation reactions during sample treatment and to study "natural" transformations of species in environmental samples, or micro- and mesocosm ecosystems, during incubations are highlighted. Important considerations to generate relevant data in isotope tracer experiments as well as reliability and quality assurance of mercury speciation analysis in general are also discussed.

Net methylmercury production as a basis for improved risk assessment of mercury-contaminated sediments

Sediments contaminated by various sources of mercury (Hg) were studied at 8 sites in Sweden covering wide ranges of climate, salinity, and sediment types. At all sites, biota (plankton, sediment living organisms, and fish) showed enhanced concentrations of Hg relative to corresponding organisms at nearby reference sites. The key process determining the risk at these sites is the net transformation of inorganic Hg to the highly toxic and bioavailable methylmercury (MeHg). Accordingly, Hg concentrations in Perca fluviatilis were more strongly correlated to MeHg (p < 0.05) than to inorganic Hg concentrations in the sediments. At all sites, except one, concentrations of inorganic Hg (2-55 microg g(-1)) in sediments were significantly, positively correlated to the concentration of MeHg (4-90 ng g(-1)). The MeHg/Hg ratio (which is assumed to reflect the net production of MeHg normalized to the Hg concentration) varied widely among sites. The highest MeHg/Hg ratios were encountered in loose-fiber sediments situated in southern freshwaters, and the lowest ratios were found in brackish-water sediments and firm, minerogenic sediments at the northernmost freshwater site. This pattern may be explained by an increased MeHg production by methylating bacteria with increasing temperature, availability of energy-rich organic matter (which is correlated with primary production), and availability of neutral Hg sulfides in the sediment pore waters. These factors therefore need to be considered when the risk associated with Hg-contaminated sediments is assessed.

Importance of dissolved neutral mercury sulfides for methyl mercury production in contaminated sediments

Biotic transformation of inorganic mercury, Hg(II), to mono methyl mercury (MeHg) is proposed to be largely controlled by passive uptake of neutral Hg complexes by sulfate reducing bacteria (SRB). In this study, the chemical speciation of Hg(II) in seven locally contaminated sediments covering environments such as (i) brackish water, (ii) low-productivity freshwater, and, (iii) high-productivity freshwater was related to potential Hg methylation rates, determined by incubation at 23 degrees C for 48 h under N2(g), and to total MeHg concentrations in sediments. Pore water speciation was modeled considering Hg complexes with halides, organic thiols [Hg(SR)2(aq), associated to dissolved organic matter], monosulfides, and bisulfides. The sum of neutral mercury sulfides [Hg(SH)20(aq)] and [HgS0(aq)] was significantly, positively (p < 0.001, n = 20) correlated to the specific methylation rate constant (Km, day(-1)) at depths of 5-100 cm in two brackish water sediments. Total Hg, total mercury sulfides or Hg(SR)2(aq) in pore water gave no significant relationships with Km. In two subsets of freshwater sediments, neutral mercury sulfides were positively correlated to total Hg in pore water, and therefore, total Hg also gave significant relationships with Km. The sum of [Hg(SH)20(aq)] and [HgS0(aq)] was significantly, positively correlated to total sediment MeHg (microg kg-1) in brackish waters (p < 0.001, n = 23), in southern, high-productivity freshwaters (p < 0.001, n = 20), as well as in northern, low-productivity freshwater (p = 0.048, n = 6). The slopes (b, b') of the relationships Km (day-1) = a + b([Hg(SH)20(aq)] + [HgS0(aq)]) and MeHg (microg kg-1) = a' + b'([Hg(SH)20(aq)] + [HgS0(aq)]) showed an inverse relationship with the C/N ratio, supposedly reflecting differences in primary production and energy-rich organic matter availability among sites. We conclude that concentrations of neutral inorganic mercury sulfide species, together with the availability of energy-rich organic matter, largely control Hg methylation rates in contaminated sediments. Furthermore, Hg(SH)20(aq) is suggested to be the dominant species taken up by MeHg producing bacteria in organic-rich sediments without formation of HgS(s).

Organic material: the primary control on mercury methylation and ambient methyl mercury concentrations in estuarine sediments

Estuarine environments that have no direct sources of mercury (Hg) pollution may have sediment concentrations of methylmercury (MeHg) as high as those of polluted marine environments. In this study we examined the biogeochemical factors affecting net methylation and sediment MeHg concentrations in an unpolluted estuarine environment, the Ore River estuary, which discharges into the Bothnian Bay (20-120 ng total Hg g(-1) dry sediment, salinity 3-5% per hundred). We analyzed the spatial and temporal differences in surface sediment profiles of MeHg concentration, Hg methylation, MeHg demethylation, and concentrations of sulfide and oxygen between accumulation and erosion type bottoms. The main difference between the bottoms studied was in the proportion of organic material (OM) in the sediment, ranging between 0.8% and 10.8%. The pore water sulfide concentration profiles also differed considerably between sites and seasons, from 0 to 20 microM, with 100 microM as the extreme maximum. The sediment MeHg concentration profiles (0-10 cm) mostly varied between 0.1 and 7 ng g(-1) dry weight (dw, as Hg). The MeHg demethylation rates were relatively low and the depth profiles of the rates were relatively constant over season, site, and depth. In contrast, both rates and depths of maximum Hg methylation differed between the bottoms. The results indicate that the amount of OM accumulated at the bottoms was the main factor affecting net MeHg production, while the total amount of Hg had little or no influence on the amount of MeHg in the sediment.

Validation of a simplified field-adapted procedure for routine determinations of methyl mercury at trace levels in natural water samples using species-specific isotope dilution mass spectrometry

A field-adapted procedure based on species-specific isotope dilution (SSID) methodology for trace-level determinations of methyl mercury (CH(3)Hg(+)) in mire, fresh and sea water samples was developed, validated and applied in a field study. In the field study, mire water samples were filtered, standardised volumetrically with isotopically enriched CH(3) (200)Hg(+), and frozen on dry ice. The samples were derivatised in the laboratory without further pre-treatment using sodium tetraethyl borate (NaB(C(2)H(5))(4)) and the ethylated methyl mercury was purge-trapped on Tenax columns. The analyte was thermo-desorbed onto a GC-ICP-MS system for analysis. Investigations preceding field application of the method showed that when using SSID, for all tested matrices, identical results were obtained between samples that were freeze-preserved or analysed unpreserved. For DOC-rich samples (mire water) additional experiments showed no difference in CH(3)Hg(+) concentration between samples that were derivatised without pre-treatment or after liquid extraction. Extractions of samples for matrix-analyte separation prior to derivatisation are therefore not necessary. No formation of CH(3)Hg(+) was observed during sample storage and treatment when spiking samples with (198)Hg(2+). Total uncertainty budgets for the field application of the method showed that for analyte concentrations higher than 1.5 pg g(-1) (as Hg) the relative expanded uncertainty (REU) was approximately 5% and dominated by the uncertainty in the isotope standard concentration. Below 0.5 pg g(-1) (as Hg), the REU was >10% and dominated by variations in the field blank. The uncertainty of the method is sufficiently low to accurately determine CH(3)Hg(+) concentrations at trace levels. The detection limit was determined to be 4 fg g(-1) (as Hg) based on replicate analyses of laboratory blanks. The described procedure is reliable, considerably faster and simplified compared to non-SSID methods and thereby very suitable for routine applications of CH(3)Hg(+) speciation analysis in a wide range of water samples.

Dose–response study of thimerosal-induced murine systemic autoimmunity

The organic compound ethylmercurithiosalicylate (thimerosal), which is primarily present in the tissues as ethylmercury, has caused illness and several deaths due to erroneous handling when used as a disinfectant or as a preservative in medical preparations. Lately, possible health effects of thimerosal in childhood vaccines have been much discussed. Thimerosal is a well-known sensitizing agent, although usually of no clinical relevance. In rare cases, thimerosal has caused systemic immune reactions including acrodynia. We have studied if thimerosal might induce the systemic autoimmune condition observed in genetically susceptible mice after exposure to inorganic mercury. A.SW mice were exposed to 1.25-40 mg thimerosal/l drinking water for 70 days. Antinucleolar antibodies, targeting the 34-kDa protein fibrillarin, developed in a dose-related pattern and first appeared after 10 days in the two highest dose groups. The lowest observed adverse effect level (LOAEL) for antifibrillarin antibodies was 2.5 mg thimerosal/l, corresponding to an absorbed dose of 147 microg Hg/kg bw and a concentration of 21 and 1.9 microg Hg/g in the kidney and lymph nodes, respectively. The same LOAEL was found for tissue immune-complex deposits. The total serum concentration of IgE, IgG1, and IgG2a showed a significant dose-related increase in thimerosal-treated mice, with a LOAEL of 5 mg thimerosal/l for IgG1 and IgE, and 20 mg thimerosal/l for IgG2a. The polyclonal B-cell activation showed a significant dose-response relationship with a LOAEL of 10 mg thimerosal/l. Therefore, thimerosal induces in genetically susceptible mice a systemic autoimmune syndrome very similar to that seen after treatment with inorganic mercury, although a higher absorbed dose of Hg is needed using thimerosal. The autoimmune syndrome induced by thimerosal is different from the weaker and more restricted autoimmune reaction observed after treatment with an equipotent dose of methylmercury.

Determination of Methylmercury, Ethylmercury, and Inorganic Mercury in Mouse Tissues, Following Administration of Thimerosal, by Species-Specific Isotope Dilution GC−Inductively Coupled Plasma-MS

Isotopically enriched HgO standards were used to synthesize CH3(200)Hg+ and C2H5(199)Hg+ using Grignard reagents. These species were employed for isotope dilution GC-ICPMS to study uptake and biotransformation of ethylmercury in mice treated with thimerosal, (sodium ethylmercurithiosalicylate) 10 mg L(-1) in drinking water ad libitum for 1, 2.5, 6, or 14 days. Prior to analysis, samples were spiked with aqueous solutions of CH3(200)Hg+, C2H5(199)Hg+, and 201Hg2+ and then digested in 20% tetramethylammonium hydroxide and extracted at pH 9 with DDTC/toluene. Extracted mercury species were reacted with butylmagnesium chloride to form butylated derivatives. Absolute detection limits for CH3Hg+, C2H5Hg+, and Hg2+ were 0.4, 0.2, and 0.6 pg on the basis of 3sigma of five separate blanks. Up to 9% of the C2H5Hg+ was decomposed to Hg2+ during sample preparation, and it is therefore crucial to use a species-specific internal standard when determining ethylmercury. No demethylation, methylation, or ethylation during sample preparation was detected. The ethylmercury component of thimerosal was rapidly taken up in the organs of the mice (kidney, liver, and mesenterial lymph nodes), and concentrations of C2H5Hg+ as well as Hg2+ increased over the 14 days of thimerosal treatment. This shows that C2H5Hg+ in mice to a large degree is degraded to Hg2+. Increased concentrations of CH3Hg+ were also observed, which was found to be due to impurities in the thimerosal.