Influence of Eggshell Powder on the Properties of Cement-Based Materials

Replacing cement with industrial by-products is an important way to achieve carbon neutrality in the cement industry. The purpose of this study is to evaluate the effect of eggshell powder on cement hydration properties, and to evaluate its feasibility as a substitute for cement. The substitution rates of eggshell powder are 0%, 7.5%, and 15%. Studying the heat of hydration and macroscopic properties can yield the following results. First: The cumulative heat of hydration based on each gram of cementitious material falls as the eggshell powder content rises. This is a result of the eggshell powder's diluting action. However, the cumulative heat of hydration per gram of cement rises due to the nucleation effect of the eggshell powder. Second: The compressive strengths of ES0, ES7.5, and ES15 samples at 28 days of age are 54.8, 43.4, and 35.5 MPa, respectively. Eggshell powder has a greater negative impact on the compressive strength. The effect of eggshell powder on the speed and intensity of ultrasonic waves has a similar trend. Third: As the eggshell powder content increases, the resistivity gradually decreases. In addition, we also characterize the microscopic properties of the slurry with added eggshell powder. X-ray Diffraction (XRD) shows that, as the age increases from 1 day to 28 days, hemicaboaluminate transforms into monocaboaluminate. As the content of the eggshell powder increases, FTIR analysis finds a slight decrease in the content of CSH. Similarly, thermogravimetric (TG) results also show a decrease in the production of calcium hydroxide. Although the additional nucleation effect of eggshell powder promotes cement hydration and generates more portlandite, it cannot offset the loss of portlandite caused by the decrease in cement. Last: A numerical hydration model is presented for cement-eggshell powder binary blends. The parameters of the hydration model are determined based on hydration heat normalized by cement mass. Moreover, the hydration heat until 28 days is calculated using the proposed model. The strength development of all specimens and all test ages can be expressed as an exponential function of hydration heat.

[Research progress in associations between dental caries and systemic diseases]

Dental caries is a bacteria-mediated, multifactorial, chronic progressive disease that results in the phasic demineralization and remineralization of dental hard tissues. In recent years, amounts of studies have focused on the association between dental caries and systemic diseases. This paper reviews the researches about associations between caries and systemic diseases. An electronic search was conducted in PubMed and Web of Science for articles published from 2003 to 2022 in the English language. Studies were included in the following ten categories of systemic diseases: cardiovascular diseases, metabolic disorders, respiratory diseases, autoimmune rheumatic diseases, neurologic diseases, gastrointestinal diseases, kidney diseases, skin diseases, iron deficiency anaemia and tumors. This review discusses the relationship between dental caries and systemic diseases, as well as the potentially involved mechanisms, providing new ideas for disease prevention, diagnosis, and treatment strategies for dentists and other clinicians.

Clinically Oriented CBCT Periapical Lesion Evaluation via 3D CNN Algorithm

Apical periodontitis (AP) is one of the most prevalent disorders in dentistry. However, it can be underdiagnosed in asymptomatic patients. In addition, the perioperative evaluation of 3-dimensional (3D) lesion volume is of great clinical relevance, but the required slice-by-slice manual delineation method is time- and labor-intensive. Here, for quickly and accurately detecting and segmenting periapical lesions (PALs) associated with AP on cone beam computed tomography (CBCT) images, we proposed and geographically validated a novel 3D deep convolutional neural network algorithm, named PAL-Net. On the internal 5-fold cross-validation set, our PAL-Net achieved an area under the receiver operating characteristic curve (AUC) of 0.98. The algorithm also improved the diagnostic performance of dentists with varying levels of experience, as evidenced by their enhanced average AUC values (junior dentists: 0.89-0.94; senior dentists: 0.91-0.93), and significantly reduced the diagnostic time (junior dentists: 69.3 min faster; senior dentists: 32.4 min faster). Moreover, our PAL-Net achieved an average Dice similarity coefficient over 0.87 (0.85-0.88), which is superior or comparable to that of other existing state-of-the-art PAL segmentation algorithms. Furthermore, we validated the generalizability of the PAL-Net system using multiple external data sets from Central, East, and North China, showing that our PAL-Net has strong robustness. Our PAL-Net can help improve the diagnostic performance and speed of dentists working from CBCT images, provide clinically relevant volume information to dentists, and can potentially be applied in dental clinics, especially without expert-level dentists or radiologists.

Low-CO2 Optimization Design of Quaternary Binder Containing Calcined Clay, Slag, and Limestone

Blended cement is commonly used for producing sustainable concretes. This paper presents an experimental study and an optimization design of a low-CO2 quaternary binder containing calcined clay, slag, and limestone using the response surface method. First, a Box-Behnken design with three influencing factors and three levels was used for the combination design of the quaternary composite cement. The lower limit of the mineral admixtures was 0%. The upper limits of slag, calcined clay, and limestone powder were 30%, 20%, and 10%, respectively. The water-to-binder ratio (water/binder) was 0.5. Experimental works to examine workability and strength (at 3 and 28 days) were performed for the composite cement. The CO2 emissions were calculated considering binder compositions. A second-order polynomial regression was used to evaluate the experimental results. In addition, a low-CO2 optimization design was conducted for the composite cement using a composite desirability function. The objectives of the optimization design were the target 28-day strength (30, 35, 40, and 45 MPa), target workability (160 mm flow), and low CO2 emissions. The trends of the properties of optimal combinations were consistent with those in the test results. In summary, the proposed optimization design can be used for designing composite cement considering strength, workability, and ecological aspects.

[An in vitro model study of computer-guided endodontic microsurgery]

Objective: To assess and compare the accuracies and operating time of endodontic microsurgery performed by operators with different levels of experience in endodontics using computer-guided techniques including dynamic and static navigations in a surgical simulation model. Methods: Six pairs of three dimensional (3D)-printed models of upper and lower jaws were set up on dental manikins. A total of 120 teeth (10 teeth each jaw) were included in the models. Microsurgeries of osteotomy and root-resection were performed on the models by two operators with different experience, namely novices and experts, under of free hand (FH)(n=20), dynamic navigation (DN)(n=20), and static navigation (SN)(n=20) conditions, respectively. The duration of each operation was recorded. Cone-beam CT was taken for 3D-printed models before and after the operation. The path of preoperative surgery planning was simulated. The linear deviations at the entry and the end point and the angular deviation of the access path between the simulated and the actual operation were compared by the software. Results: Significant difference of the entry deviation was observed between the novices and the experts in the FH group [(1.44±0.49) and (1.02±0.58) mm] (q=4.67, P=0.020). There were no significant differences between the novices and the experts in the end point and angular deviations (P>0.05). For the novices, the entry deviations in both DN and SN groups [(0.76±0.32) and (0.66±0.20) mm] were significantly lower than those in FH group (q=7.58, P<0.001; q=8.66, P<0.001). The angular deviations in the abovementioned two groups (5.0°±3.5°, 3.9°±2.1°) were significantly lower than that in FH group (10.9°±6.1°) (q=7.38, P<0.001; q=8.70, P<0.001). For the experts, significant differences were found only in the angular deviations among DN, SN and FH groups (3.6°±1.9°, 3.2°±1.7° and 8.2°±3.9°) (q=5.74, P=0.001; q=6.29, P<0.001). The operation durations were significantly shortened for both the novices [(4.80±2.15), (1.09±0.48) min] (q=14.60, P<0.001; q=20.10, P<0.001) and the experts [(3.40±1.96),(1.02±0.34) min] (q=5.86, P<0.001; q=9.37, P<0.001) by using DN and SN techniques. Regarding the differences between tooth types, in FH group, the operating time on the anterior teeth was significantly shorter than that on the posterior teeth (q=8.14, P<0.001; q=5.20, P=0.007), while in DN and SN groups, there were no significant differences in the operating time between two tooth types (P>0.05). No significant differences were discovered in the accuracies on the anterior and posterior teeth among three techniques or between two kinds of operators (P>0.05). Conclusions: Dynamic and static navigation techniques could assist the clinicians, especially the novices, to improve the accuracies and shorten the operating time of osteotomy and root resection microsurgeries.

[The value of "posterior approach, uncinate process priority, artery first" in laparoscopic pancreatoduodenectomy]

Objective: To explore the value of "posterior approach, uncinate process priority, artery first" in laparoscopic pancreatoduodenectomy. Methods: The clinical data of 200 patients who underwent laparoscopic pancreatoduodenectomy from January 2018 to April 2019 in the Second Department of Hepatobiliary and Pancreatic Surgery, the First Hospital of Jilin University were analyzed retrospectively. Meanwhile, the advantages of "posterior approach, uncinate process priority, artery first" were analyzed. Results: Two hundred patients were treated with "posterior approach, uncinate process priority, artery first". The average total operation time was (260.2±50.1) min, sample cutting time was (86.6±18.7) min, intraoperative bleeding volume was 50 (50-100) ml, average number of lymph node dissection was (19.2±7.4), and average hospitalization time was (17.9±9.9) days. Conclusion: The "posterior approach, uncinate process first, artery first" approach not only protects the variant hepatic artery, but also allows early detection of SMA, clarifies the positional relationship between the tumor and SMA, realizes R0 resection, and reduces the amount of bleeding during operation and shortens the operation time, which is safe and feasible in clinical setting.

[The prevention and control of a new coronavirus infection in department of stomatology]

During a short period of time, the outbreak of pneumonia caused by a novel coronavirus, named Novel Coronavirus Pneumonia (NCP), was first reported in China, spreading to 24 countries and regions rapidly. The number of confirmed cases and deaths continued to rise. World Health Organization (WHO) announced that the outbreaks of the novel coronavirus have constituted a Public Health Emergency of International Concern. Efficient infection control can prevent the virus from further spreading, which makes the epidemic situation under control. Due to the specialty of oral healthcare settings, the risk of cross infection is severe among patients and oral healthcare practitioners. It's more urgent to implement strict and efficient infection control protocols. This paper, based on existing guidelines and published researches pertinent to dental infection-control principles and practices, mainly discusses epidemiological characteristics of NCP and the features of nosocomial infection in oral healthcare settings, and furthermore provides recommendations on patient's evaluation, and infection control protocols in department of stomatology under current circumstance..

Increased expression of integrin alpha2 and abnormal response to TGF-beta1 in hereditary gingival fibromatosis

OBJECTIVE

To investigate the possible correlation between integrin alpha1, alpha2, and beta1 expression and excessive collagen synthesis in fibroblasts from 3 unrelated Chinese families with hereditary gingival fibromatosis (HGF).

DESIGN

Gingival fibroblasts from three Chinese HGF patients and three healthy subjects were included. The expression of alpha1, alpha2, and beta1 integrin subunits was examined by immunohistochemistry, quantitative PCR, and flow cytometry. We also investigated the effects of transforming growth factor-beta1 (TGF-beta1) on the expression of these integrin subunits.

RESULTS

Our results demonstrate that the expression of alpha2 was significantly higher in HGF fibroblasts compared with control fibroblasts (P < 0.01). No significant differences in the expression of alpha1 and beta1 were detected. Furthermore, TGF-beta1 promoted the expression of alpha1 and alpha2 in fibroblasts from both HGF patients and controls. However, it had a larger effect on the expression of alpha2 in HGF fibroblasts than in control cells. In contrast, alpha1 expression was stimulated more in control fibroblasts.

CONCLUSION

The increased expression of integrin alpha2 and the increased response to TGF-beta1 of HGF fibroblasts may be related to the excessive collagen deposition in HGF patients.