Photolithographic Patterning of Organic Color-Centers

Organic color-centers (OCCs) have emerged as promising single-photon emitters for solid-state quantum technologies, chemically specific sensing, and near-infrared bioimaging. However, these quantum light sources are currently synthesized in bulk solution, lacking the spatial control required for on-chip integration. The ability to pattern OCCs on solid substrates with high spatial precision and molecularly defined structure is essential to interface electronics and advance their quantum applications. Herein, a lithographic generation of OCCs on solid-state semiconducting single-walled carbon nanotube films at spatially defined locations is presented. By using light-driven diazoether chemistry, it is possible to directly pattern p-nitroaryl OCCs, which demonstrate chemically specific spectral signatures at programmed positions as confirmed by Raman mapping and hyperspectral photoluminescence imaging. This light-driven technique enables the fabrication of OCC arrays on solid films that fluoresce in the shortwave infrared and presents an important step toward the direct writing of quantum emitters and other functionalities at the molecular level.

Fluorescent sp3 Defect-Tailored Carbon Nanotubes Enable NIR-II Single Particle Imaging in Live Brain Slices at Ultra-Low Excitation Doses

Cellular and tissue imaging in the second near-infrared window (NIR-II, ~1000–1350 nm) is advantageous for in vivo studies because of low light extinction by biological constituents at these wavelengths. However, deep tissue imaging at the single molecule sensitivity has not been achieved in the NIR-II window due to lack of suitable bio-probes. Single-walled carbon nanotubes have emerged as promising near-infrared luminescent molecular bio-probes; yet, their inefficient photoluminescence (quantum yield ~1%) drives requirements for sizeable excitation doses (~1–10 kW/cm²) that are significantly blue-shifted from the NIR-II region (<850 nm) and may thus ultimately compromise live tissue. Here, we show that single nanotube imaging can be achieved in live brain tissue using ultralow excitation doses (~0.1 kW/cm²), an order of magnitude lower than those currently used. To accomplish this, we synthesized fluorescent sp³-defect tailored (6,5) carbon nanotubes which, when excited at their first order excitonic transition (~985 nm) fluoresce brightly at ~1160 nm. The biocompatibility of these functionalized nanotubes, which are wrapped by encapsulation agent (phospholipid-polyethylene glycol), is demonstrated using standard cytotoxicity assays. Single molecule photophysical studies of these biocompatible nanotubes allowed us to identify the optimal luminescence properties in the context of biological imaging.

Controlling the optical properties of carbon nanotubes with organic colour-centre quantum defects

Previously unwelcome, defects are emerging as a new frontier of research, providing a molecular focal point to study the coupling of electrons, excitons, phonons and spin in low-dimensional materials. This opportunity is particularly intriguing in semiconducting single-walled carbon nanotubes, in which covalently bonding organic functional groups to the sp 2 carbon lattice can produce tunable sp 3 quantum defects that fluoresce brightly in the shortwave IR, emitting pure single photons at room temperature. These novel physical properties have made such synthetic defects, or 'organic colour centres', exciting new systems for chemistry, physics, materials science, engineering and quantum technologies. This Review examines progress in this emerging field and presents a unified description of this new family of quantum emitters, as well as providing an outlook of the rapidly expanding research and applications of synthetic defects.

Channeling Excitons to Emissive Defect Sites in Carbon Nanotube Semiconductors beyond the Dilute Regime

The exciton photoluminescence of carbon nanotube semiconductors has been intensively exploited for bioimaging, anticounterfeiting, photodetection, and quantum information science. However, at high concentrations, photoluminescence is lost to self-quenching because of the nearly complete overlap of the absorption and emissive states (∼10 meV Stokes shift). Here we show that by introducing sparse fluorescent quantum defects via covalent chemistry, self-quenching can be efficiently bypassed by means of the new emission route. The defect photoluminescence is significantly red-shifted by 190 meV for p-nitroaryl tailored (6,5)-single-walled carbon nanotubes (SWCNTs) from the native emission of the nanotube. Notably, the defect photoluminescence is more than 34 times brighter than the native photoluminescence of unfunctionalized SWCNTs in the most concentrated nanotube solution tested (2.7 × 10¹⁴ nanotubes/mL). Moreover, we show that defect photoluminescence is more resistant to self-quenching than the native state in a dense film, which is the upper limit of concentration. Our findings open opportunities to harness nanotube excitons in highly concentrated systems for applications where photoluminescence brightness and light-collecting efficiency are mutually important.

Chirality-Selective Functionalization of Semiconducting Carbon Nanotubes with a Reactivity-Switchable Molecule

Chirality-selective functionalization of semiconducting single-walled carbon nanotubes (SWCNTs) has been a difficult synthetic goal for more than a decade. Here we describe an on-demand covalent chemistry to address this intriguing challenge. Our approach involves the synthesis and isolation of a chemically inert diazoether isomer that can be switched to its reactive form in situ by modulation of the thermodynamic barrier to isomerization with pH and visible light that resonates with the optical frequency of the nanotube. We found that it is possible to completely inhibit the reaction in the absence of light, as determined by the limit of sensitive defect photoluminescence (less than 0.01% of the carbon atoms are bonded to a functional group). This optically driven diazoether chemistry makes it possible to selectively functionalize a specific SWCNT chirality within a mixture. Even for two chiralities that are nearly identical in diameter and electronic structure, (6,5)- and (7,3)-SWCNTs, we are able to activate the diazoether compound to functionalize the less reactive (7,3)-SWCNTs, driving the chemical reaction to near exclusion of the (6,5)-SWCNTs. This work opens opportunities to chemically tailor SWCNTs at the single chirality level for nanotube sorting, on-chip passivation, and nanoscale lithography.

Optical Excitation of Carbon Nanotubes Drives Localized Diazonium Reactions

Covalent chemistries have been widely used to modify carbon nanomaterials; however, they typically lack the precision and efficiency required to directly engineer their optical and electronic properties. Here, we show, for the first time, that visible light which is tuned into resonance with carbon nanotubes can be used to drive their functionalization by aryldiazonium salts. The optical excitation accelerates the reaction rate 154-fold (±13) and makes it possible to significantly improve the efficiency of covalent bonding to the sp(2) carbon lattice. Control experiments suggest that the reaction is dominated by a localized photothermal effect. This light-driven reaction paves the way for precise nanochemistry that can directly tailor carbon nanomaterials at the optical and electronic levels.

Probing the efficacy of peptide-based inhibitors against acid- and zinc-promoted oligomerization of amyloid-β peptide via single-oligomer spectroscopy

One avenue for prevention and treatment of Alzheimer's disease involves inhibiting the aggregation of amyloid-β peptide (Aβ). Given the deleterious effects reported for Aβ dimers and trimers, it is important to investigate inhibition of the earliest association steps. We have employed quantized photobleaching of dye-labeled Aβ peptides to characterize four peptide-based inhibitors of fibrillogenesis and/or cytotoxicity, assessing their ability to inhibit association in the smallest oligomers (n=2-5). Inhibitors were tested at acidic pH and in the presence of zinc, conditions that may promote oligomerization in vivo. Distributions of peptide species were constructed by examining dozens of surface-tethered monomers and oligomers, one at a time. Results show that all four inhibitors shift the distribution of Aβ species toward monomers; however, efficacies vary for each compound and sample environment. Collectively, these studies highlight promising design strategies for future oligomerization inhibitors, affording insight into oligomer structures and inhibition mechanisms in two physiologically significant environments.