Simultaneous determination of ergotamine, caffeine and dipyrone in their ternary mixture by applying double divisor and first derivative ratio spectra methods

Two validated methods namely, double divisor ratio spectra derivative spectroscopy and derivative ratio spectroscopy with zero crossing point were applied to assay a ternary mixture of ergotamine tartrate (EGT), caffeine (CAF) and dipyrone sodium (DIP) without any additional separation steps. The linearity ranges using both methods were (1.0 µg/mL-70.0 µg/mL), (60.0 µg/mL - 100.0 µg/mL) and (100.0 µg/mL - 300.0 µg/mL) for EGT, CAF and DIP respectively. Double divisor ratio spectroscopy (method A) depends on dividing the different peak responses of EGT on (summation of peaks responses of CAF and DIP each of 10.0 µg/mL concentration) at λ max=342 nm, 310 nm and 315 nm for EGT, CAF and DIP respectively. Derivative ratio spectroscopy with zero crossing point (method B) depends on dividing the peak responses of two drugs (EGT and CAF) on (10.0 µg/mL of DIP) and dividing the peak response of DIP on peak response of (10.0 µg/mL of EGT). The detection limits of the studied drugs applying method A were (3.54, 12.96 and 8.748 µg/mL), with quantitation limits of (10.73, 39.28 and 26.51 µg/mL) for EGT, CAF and DIP respectively. Regarding method B, the limits of detection and quantitation for EGT were 0.604 µg/mL and 1.829 µg/mL respectively: with corresponding values of 19.44 µg/mL and 58.92 µg/mL for CAF and 20.44 µg/mL and 61.9 µg/mL for DIP. The obtained results were compared to those obtained by published methods and were found to be in accordance.

Studying the suitability of hybrid micelle liquid chromatography for estimating the lipophilicity of some partial dopamine agonists used to attain the reward circuit

Three micellar-based mobile phases were developed and optimized for the simultaneous determination of certain partial dopamine agonists that are used to overcome the withdrawal symptoms of abused drugs, namely aripiprazole, pramipexole and piribedil. The studied drugs were separated using micellar liquid chromatography, hybrid micellar liquid chromatography (HMLC) and microemulsion liquid chromatography (MELC). The three developed mobile phases were studied to estimate their suitability for the measurement of log p-values of the studied drugs. Experimental determination of log Pm/w values using the three mobile phases demonstrates that HMLC is the mobile phase of choice since the obtained practical log Pm/w values were in accordance with the reported log P values, and calculated log P and log D values. An explanation of the obtained results was presented based on the separation retention mechanism for each chromatographic technique. Furthermore, the effect of the pH and the column temperature in HMLC on the practical log Pm/w values was studied. To verify its suitability for experimental measurement of log Pm/w , HMLC was subjected to full validation according to the United States Pharmacopeia.

Analysis of clozapine in its tablets using two novel spectrophotometric reactions targeting its tertiary amino group

Two simple spectrophotometric methodologies have been proposed and validated for the measurement of an atypical antipsychotic drug Clozapine (CLZ). Method A depends on interaction of CLZ with N-bromosuccinimide(NBS) resulting in formation of a yellowish orange colored product, measured at 320 nm. The linearity range was 5.0-70.0 μg/mL. Method B depends on condensation of the same drug with acetic acid mixed anhydride reagent producing a purple colored product, measured at 319 nm. The linearity range was 8.0-24.0 μg/mL. All parameters affecting the reaction condition (volume of both reagent, temperature, time and the different diluting solvents) were optimized. Both methods were successfully applied to assay CLZ in its pure form and tablets giving mean percentage recoveries of (98.87 ± 1.8 and 100 ± 1.7) for method A, and corresponding values of (98.6 ± 0.96 and 99.5 ± 1) for method B. Besides, the study of reactions stoichiometry was performed and the reaction mechanisms were proposed.

Analytical method development and validation of spectrofluorimetric and spectrophotometric determination of some antimicrobial drugs in their pharmaceuticals

In this study, three novel, sensitive, simple and validated spectrophotometric and spectrofluorimetric methods have been proposed for estimation of some important antimicrobial drugs. The first two methods have been proposed for estimation of two important third-generation cephalosporin antibiotics namely, cefixime and cefdinir. Both methods were based on condensation of the primary amino group of the studied drugs with acetyl acetone and formaldehyde in acidic medium. The resulting products were measured by spectrophotometric (Method I) and spectrofluorimetric (Method II) tools. Regarding method I, the absorbance was measured at 315nm and 403nm with linearity ranges of 5.0-140.0 and 10.0-100.0μg/mL for cefixime and cefdinir, respectively. Meanwhile in method II, the produced fluorophore was measured at λ_em 488nm or 491nm after excitation at λ_ex 410nm with linearity ranges of 0.20-10.0 and 0.20-36.0μg/mL for cefixime and cefdinir, respectively. On the other hand, method III was devoted to estimate nifuroxazide spectrofluorimetrically depending on formation of highly fluorescent product upon reduction of the studied drug with Zinc powder in acidic medium. Measurement of the fluorescent product was carried out at λ_em 335nm following excitation at λ_ex 255nm with linearity range of 0.05 to 1.6μg/mL. The developed methods were subjected to detailed validation procedure, moreover they were used for the estimation of the concerned drugs in their pharmaceuticals. It was found that there is a good agreement between the obtained results and those obtained by the reported methods.

Simultaneous Liquid Chromatographic Determination of Ebastine with Two Sympathomimetic Drugs Using a Monolithic Column

Ebastine (EBS) has been assayed in its laboratory-prepared co-formulated tablets with either pseudoephedrine hydrochloride (PSU) or phenylephrine hydrochloride (PHR) using isocratic reversed-phase chromatography. Separation was conducted using a 50 mm × 4.6 mm i.d., Chromolith® SpeedROD RP-18 end-capped column at ambient temperature. A mobile phase composed of water:acetonitrile in a ratio of 25:75 having a pH of 3.2, has been utilized at 1 mL/min with UV detection at 254 nm for both EBS and PSU and 274 nm for PHR which in turn increased the sensitivity of the proposed method significantly. Symmetric well-separated peaks resulted in a short chromatographic run; <5 min. The proposed method was subjected to detailed validation procedures and proved to be highly sensitive as shown from limit of quantification values which were 4.7, 39.4 and 10.2 μg/mL for EBS, PSU and PHR, respectively. The proposed method was used to analyze EBS in its laboratory-prepared co-formulated tablets; the obtained results were comparable to those resulting from the reference method.

Validated Stability indicating Spectrophotometric Method for the Determination of Acetazolamide in Dosage Forms through Complex Formation with Palladium (II)

A simple and sensitive spectrophotometric method was developed for the determination of acetazolamide (ACM) in pure form and pharmaceutical preparations. The proposed method is based on the complex formation of acetazolamide with Palladium (II) chloride in acetate buffer pH5.4 and measuring the absorbance at 308 nm. The absorbance- concentration plot was rectilinear over the concentration range of 5-70 μg/ml with a minimum detection limit (LOD) of 0.98 μg/ml, limit of quantification (LOQ) of 2.96 μg/ml, and a molar absorptivity ζ=2.7 × 10(3) L/mol.cm. The factors affecting the absorbance of the formed complex were carefully studied and optimized. The composition of the complex as well as its stability constant was also investigated. The proposed method was applied for the determination of acetazolamide in its tablets and the results obtained were favorably compared with those obtained using the official method. A proposal of the reaction pathway was postulated.

Spectrofluorimetric Determination of Famotidine in Pharmaceutical Preparations and Biological Fluids through Ternary Complex Formation with Some Lanthanide Ions: Application to Stability Studies

A simple, sensitive and specific method was developed for the determination of famotidine (FMT) in pharmaceutical preparations and biological fluids. The proposed method is based on ternary complex formation of famotidine (FMT) with EDTA and terbium chloride TbCl3 in acetate buffer of pH 4. Alternatively, the complex is formed via the reaction with hexamine and either lanthanum chloride LaCl3, or cerous chloride CeCl3 in borate buffer of pH6.2 and 7.2 respectively. In all cases, the relative fluorescence intensity of the formed complexes was measured at 580 nm after excitation at 290 nm. The fluorescence intensity - concentration plots were rectilinear over the concentration range of 10-100, 5-70, and 5-60 ng/ml, with minimum quantification limits (LOQ) of 2.4, 2.2, and 5.2 ng/ml, and minimum limits of detection (LOD) of 0.79, 0.74, and 1.7 ng/ml upon using TbCl3, LaCl3, and CeCl3 respectively. The proposed method was applied successfully for the analysis of famotidine in dosage forms and in human plasma. The kinetics of both alkaline and oxidative induced degradation of the drug was studied using the proposed method. The apparent first order rate constant and half life time were calculated. A proposal of the reaction pathways is presented.