Association of obstructive sleep apnea and sleep quality with cognitive function: a study of middle-aged and elderly persons in India

INTRODUCTION

Symptoms of obstructive sleep apnea (OSA) and poor sleep quality affect around one in ten people in India. We aimed to determine if OSA symptoms and poor sleep quality are independently associated with cognition in middle-aged and elderly urban Indian populations.

METHODS

We studied the cross-sectional association between OSA symptoms (by Berlin Questionnaire), poor sleep quality (by Pittsburgh Sleep Quality Index), and cognitive function in adults ≥ 50 years. Using a standard neuropsychological battery for cognitive function, a G-factor was derived as the first rotated principal component assessing domains of information processing, memory, and executive function. The associations of exposures with cognitive measures were modeled using linear regression, adjusted for metabolic risk factors, lifestyle factors, and psychosocial problems, followed by stratified analysis by decadal age group.

RESULTS

A total of 7505 adults were enrolled. Excluding those with MMSE < 26 (n 710), of 6795 individuals (49.2% women), mean (SD) age 64.2 (9.0) years, 38.3% had high risk of OSA symptoms, and 15.9% had poor sleep quality. OSA symptoms were negatively associated with cognitive domains of information processing (adjusted beta coefficient of z-score - 0.02, p-value 0.006), memory (- 0.03, 0.014), and G-factor (- 0.11, 0.014) in full-model. Stratified analysis by age group showed significant adverse effects of OSA symptoms on cognition for middle-aged people (50-60 years) (- 0.26, 0.001), but not in later age groups. Poor sleep quality was also associated with lower cognitive scores for G-factor (- 0.48, < 0.001), memory (- 0.08, 0.005), and executive domains (- 0.12, < 0.001), but not with information domain.

CONCLUSION

The findings suggest that both symptoms of OSA and poor sleep quality have a direct adverse impact on cognition in an Indian setting. A modest effect of age on the relationship of OSA and cognition was also observed.

Profitable Fischer Tropsch realization via CO2-CH4 reforming; an overview of nickel-promoter-support interactions

Environmental pollution, climate change, and fossil fuel extinction have aroused serious global interest in the search for alternative energy sources. The dry reforming of methane (DRM) could be a good technique to harness syngas, a starting material for the FT energy process from greenhouse gases. Noble metal DRM catalysts are effective for the syngas generation but costly. Therefore, they inevitably, must be replaced by their Ni-based contemporaries for economic reasons. However, coking remains a strong challenge that impedes the industrialization of the FT process. This article explains the secondary reactions that lead to the production of detrimental graphitic coke deposition on the surface of active nickel catalyst. The influence of nickel particle size, impact of extra surface oxygen species, interaction of Ni catalysts with metal oxide supports/promoters, and larger fraction of exposed nickel active sites were addressed in this review. Size of active metal determines the conversion, surface area, metal dispersion, surface reactions, interior diffusion effects, activity, and yield. The influence of oxygen vacancy and coke deposition on highly reported metal oxide supports/promoters (Al₂O₃, MgO and La₂O₃) was postulated after studying CIFs (crystallographic information files) obtained from the Crystallography open database (COD) on VESTA software. Thus, overcoming excessive coking by La₂O₃ promotion is strongly advised in light of the orientation of the crystal lattice characteristics and the metal-support interaction can be used to enhance activity and stability in hydrogen reforming systems.

A state of the art review on electrochemical technique for the remediation of pharmaceuticals containing wastewater

Pharmaceutical wastewater is a frequent kind of wastewater with high quantities of organic pollutants, although little research has been done in the area. Pharmaceutical wastewaters containing antibiotics and high salinity may impair traditional biological treatment, resulting in the propagation of antibiotic resistance genes. The potential for advanced oxidation processes (AOPs) to break down hazardous substances instead of present techniques that essentially transfer contaminants from wastewater to sludge, a membrane filter, or an adsorbent has attracted interest. Among a variety of AOPs, electrochemical systems are a feasible choice for treating pharmaceutical wastewater. Many electrochemical approaches exist now to remediate rivers polluted by refractory organic contaminants, like pharmaceutical micro-pollutants, which have become a severe environmental problem. The first part of this investigation provides the bibliometric analysis of the title search from 1970 to 2021 for keywords such as wastewater and electrochemical. We have provided information on relations between keywords, countries, and journals based on three fields plot, inter-country co-authorship network analysis, and co-occurrence network visualization. The second part introduces electrochemical water treatment approaches customized to these very distinct discarded flows, containing how processes, electrode materials, and operating conditions influence the results (with selective highlighting cathode reduction and anodic oxidation). This section looks at how electrochemistry may be utilized with typical treatment approaches to improve the integrated system's overall efficiency. We discuss how electrochemical cells might be beneficial and what compromises to consider when putting them into practice. We wrap up our analysis with a discussion of known technical obstacles and suggestions for further research.

Novel Ta/chitosan-doped CuO nanorods for catalytic purification of industrial wastewater and antimicrobial applications

Novel tantalum (Ta) and chitosan (CS)-doped CuO nanorods (NRs) were synthesized using a single step co-precipitation route. Different concentrations (2 and 4%) of Ta were used in fixed amounts of CS and CuO to examine their catalytic activity and antimicrobial potential. For critical analysis, synthesized NRs were systematically examined using XRD, FTIR HRTEM, EDS, UV-Vis and PL spectroscopy. The XRD technique revealed the monoclinic structure of CuO while an increase in its crystallite size (from 15.5 to 18.5 nm) was observed upon doping. FTIR spectra were examined to study the functional groups of CuO where peaks at 514 cm-1 and 603 cm-1 confirmed the formation of CuO NRs. PL spectra depicted the charge transfer efficiency of the synthesized samples. The presence of dopants (Ta and CS) and constituent elements (Cu, O) was detected using EDS spectra. Additionally, the pH based catalytic performance of fabricated NRs revealed 99.7% dye degradation of toxic methylene blue (MB) dye in neutral media, 99.4% in basic media and 99.5% in acidic media along with promising antibacterial activities for Gram negative/positive bacteria, respectively upon doping of Ta (4%) into CS/CuO. The adsorption energies of CuO co-doped with CS/Ta led to the creation of stable structures that were investigated theoretically using density functional theory.

Tracheomalacia after thyroidectomy for retrosternal goitres requiring sternotomy- a myth or reality?

INTRODUCTION

Tracheomalacia after thyroidectomy is not well understood. Reports on tracheomalacia are conflicting, with some suggesting a high rate and other large cohorts in which no tracheomalacia is reported. The aim of our study was to assess the incidence and factors associated with tracheomalacia after thyroidectomy in patients with retrosternal goitres requiring sternotomy at a high-volume tertiary care referral centre.

METHODS

A longitudinal cohort study was conducted from January 2011 to December 2019. All adult patients who underwent thyroidectomy with sternotomy were included. Tracheomalacia was considered when tracheal rings were soft compared with other parts (proximal or distal) of the trachea and required either tracheostomy or resection with anastomosis. The decision to perform a tracheostomy or to administer continuous or bilevel positive airway pressure postoperatively was made depending on the degree of tracheomalacia. Logistic regression analysis was used to assess factors associated with tracheomalacia.

RESULTS

We evaluated 40 patients who underwent thyroidectomy with sternotomy. The mean age of our cohort was 48.7 ± 11.3 years and the population was predominantly female (67.5%). One patient required tracheal resection with anastomosis, and two patients required tracheostomy. Multivariable logistic regression analysis did not reveal any patient- or thyroid-related factor significantly associated with the development of tracheomalacia in our cohort.

CONCLUSIONS

The incidence of tracheomalacia after thyroidectomy with sternotomy appears to be very low. However, the occurrence of tracheomalacia after thyroidectomy in cases of large goitre is possible and hence worrisome.

Novel Ag/cellulose-doped CeO2 quantum dots for efficient dye degradation and bactericidal activity with molecular docking study

In the present study, the novel Ag/cellulose nanocrystal (CNC)-doped CeO₂ quantum dots (QDs) with highly efficient catalytic performance were synthesized using one pot co-precipitation technique, which were then applied in the degradation of methylene blue and ciprofloxacin (MBCF) in wastewater. Catalytic activity against MBCF dye was significantly reduced (99.3%) for (4%) Ag dopant concentration in acidic medium. For Ag/CNC-doped CeO₂ vast inhibition domain of G-ve was significantly confirmed as (5.25-11.70 mm) and (7.15-13.60 mm), while medium- to high-concentration of CNC levels were calculated for G + ve (0.95 nm, 1.65 mm), respectively. Overall, (4%) Ag/CNC-doped CeO₂ revealed significant antimicrobial activity against G-ve relative to G + ve at both concentrations, respectively. Furthermore, in silico molecular docking studies were performed against selected enzyme targets dihydrofolate reductase (DHFR), dihydropteroate synthase (DHPS), and DNA gyrase belonging to folate and nucleic acid biosynthetic pathway, respectively to rationalize possible mechanism behind bactericidal potential of CNC-CeO₂ and Ag/CNC-CeO₂.

[Results of the Limberg flap procedure in acute and chronic pilonidal abscesses]

Hintergrund

In der Behandlung des Sinus pilonidalis werden unterschiedliche Therapiealgorithmen für den akuten sowie den chronischen Sinus pilonidalis empfohlen. Während sich beim chronischen Sinus pilonidalis ein einzeitiges Vorgehen als Exzision oder plastische Rekonstruktion nach Limberg oder Karydakis anbietet, ist die empfohlene Vorgehensweise beim akuten Pilonidalabszess zweizeitig. Ziel dieser Studie war es, die Ergebnisse der einzeitigen Operation mit Limberg-Plastik bei akutem Pilonidalabszess und chronischem Sinus pilonidalis bezogen auf Rezidive, Wundheilungsstörungen, stationärer Liegedauer sowie Patientenzufriedenheit zu vergleichen.

Methoden

Von 2009 bis 2014 wurden 39 Patienten in die prospektive Beobachtungsstudie eingeschlossen. 21 Patienten mit akutem Pilonidalabszess, 18 mit chronischem Sinus pilonidalis. Alle Patienten wurden einzeitig mittels Limberg-Rautenplastik operativ behandelt. Die Gruppen wurden in Bezug auf postoperative Komplikationsrate und Rezidivhäufigkeit miteinander verglichen.

Ergebnisse

Beide Gruppen waren im Wesentlichen vergleichbar. Die Analyse der postoperativen Ergebnisse zeigte eine vergleichbare Rate an Wundheilungsstörungen (10 % vs. 17 %, p = 0,647). In der Gruppe des akut abszedierten Sinus trat kein Rezidiv im Beobachtungszeitraum auf, während sich in der chronischen Gruppe 2 (11 %) Rezidive zeigten (p = 0,206).

Diskussion

Die Ergebnisse der Limberg-Plastik als einzeitige Therapie des Pilonidalabszesses sind mit denen beim chronischen Sinus pilonidalis vergleichbar. Es zeigt sich ein Trend zu einem geringeren Rezidivrisiko. Der Einsatz der Limberg-Plastik scheint daher auch in der akuten Infektsituation eine adäquate Therapieoption.

Graphene Oxide-Doped MgO Nanostructures for Highly Efficient Dye Degradation and Bactericidal Action

Various concentrations (0.01, 0.03 and 0.05 wt ratios) of graphene oxide (GO) nanosheets were doped into magnesium oxide (MgO) nanostructures using chemical precipitation technique. The objective was to study the effect of GO dopant concentrations on the catalytic and antibacterial behavior of fixed amount of MgO. XRD technique revealed cubic phase of MgO, while its crystalline nature was confirmed through SAED profiles. Functional groups presence and Mg-O (443 cm-1) in fingerprint region was evident with FTIR spectroscopy. Optical properties were recorded via UV-visible spectroscopy with redshift pointing to a decrease in band gap energy from 5.0 to 4.8 eV upon doping. Electron-hole recombination behavior was examined through photoluminescence (PL) spectroscopy. Raman spectra exhibited D band (1338 cm-1) and G band (1598 cm-1) evident to GO doping. Formation of nanostructure with cubic and hexagon morphology was confirmed with TEM, whereas interlayer average d-spacing of 0.23 nm was assessed using HR-TEM. Dopants existence and evaluation of elemental constitution Mg, O were corroborated using EDS technique. Catalytic activity against methyl blue ciprofloxacin (MBCF) was significantly reduced (45%) for higher GO dopant concentration (0.05), whereas bactericidal activity of MgO against E. coli was improved significantly (4.85 mm inhibition zone) upon doping with higher concentration (0.05) of GO, owing to the formation of nanorods.

Silver decorated 2D nanosheets of GO and MoS2serve as nanocatalyst for water treatment and antimicrobial applications as ascertained with molecular docking evaluation

In this work, synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) was realized through a modified Hummers route. Different concentrations (5 and 10 wt%) of Ag were doped in MoS₂and rGO using a hydrothermal technique. Synthesized Ag-MoS₂and Ag-rGO were evaluated through XRD that confirmed the hexagonal structure of MoS₂along with the transformation of GO to Ag-rGO as indicated by a shift in XRD peaks while Mo-O bonding and S=O functional groups were confirmed with FTIR. Morphological information of GO and formation of MoS₂nanopetals as well as interlayer spacing were verified through FESEM and HRTEM respectively. Raman analysis was employed to probe any evidence regarding defect densities of GO. Optical properties of GO, MoS₂, Ag-rGO, and Ag-MoS₂were visualized through UV-vis and PL spectroscopy. Prepared products were employed as nanocatalysts to purify industrial wastewater. Experimental results revealed that Ag-rGO and Ag-MoS₂showed 99% and 80% response in photocatalytic activity. Besides, the nanocatalyst (Ag-MoS₂and Ag-rGO) exhibited 6.05 mm inhibition zones againstS. aureusgram positive (G+) and 3.05 mm forE. coligram negative (G-) in antibacterial activity. To rationalize biocidal mechanism of Ag-doped MoS₂NPs and Ag-rGO,in silicomolecular docking study was employed for two enzymes i.e.β-lactamase and D-alanine-D-alanine ligase B (ddlB) from cell wall biosynthetic pathway and enoyl-[acylcarrier-protein] reductase (FabI) from fatty acid biosynthetic pathway belonging toS. aureus. The present study provides evidence for the development of cost-effective, environment friendly and viable candidate for photocatalytic and antimicrobial applications.

Coiling of internal carotid through 'eye of the needle' internal jugular vein: a dual great vessel anomaly

A variation in the usual course of great vessels during neck dissection can predispose them to inadvertent iatrogenic injury, which can lead to massive bleeding. We present a case of a male patient with oral squamous cell carcinoma who underwent inferior maxillectomy and supra-omohyoid neck dissection. Lateral coiling of the extracranial internal carotid artery was seen through fenestration of the internal jugular vein. Anomalies of great vessels in the neck are rare. Variation in the course of any of these vessels can prove to be catastrophic if control is not achieved. Careful study of radiographic imaging with special consideration given to the course of great vessels in the neck should be undertaken prior to neck surgeries.

Effect of vitamin A as a neoadjuvant agent in chemotherapy and photodynamic therapy of Rhabdomyosarcoma cells

Combinational therapy is among the most used treatment modality's to increase cancer treatment efficacy. It may also reduce side effects, treatment time, and development of drug resistance. The effects of different analogues of vitamin A (VA) as neoadjuvant agent were observed in this study with chemotherapeutic drugs (doxorubicin and methotrexate) and photodynamic therapy (PDT) using 5-ALA and Photogem as photosensitizers in RD cells. The uptake time of photosensitizer was optimized by means of spectrophotometric measurements. Diode laser (λ = 635 nm ± 1 nm) was used as an illumination source for PDT. Responses of administered drugs were assessed by 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay. VA and its analogues exert prophylactic and therapeutic effects. Protective or antagonistic effects (CI > 1) were observed in each of the case. These results propose that the use of VA as a neoadjuvant agent in combinational therapeutic modalities may reduce the efficacy of cancer treatment protocols as well as the existing side effects. Thus, VA is not the successful drug for combinational therapies and under treatment cancer patients should try to avoid its use with oxidative stress induction therapies (e.g. PDT, Radiotherapy, chemotherapy).

Sex-specific reference values and determinants of infra-renal abdominal aortic diameter among women and men from general population

Introduction

Abdominal aortic diameter has shown to be a marker of adverse cardiovascular outcomes. Among the non-aneurysmal populations, studies regarding abdominal aortic diameter normal reference values are sparse. Moreover, data regarding the associations between cardiovascular risk factors and aortic diameter among men and women are limited.

Purpose

To establish age- and sex-specific distribution of the infra-renal abdominal aortic diameters among non-aneurysmal older adults from the general population and to investigate the associations between cardiovascular risk factors and aortic diameters in men and women.

Methods

From a population-based cohort, 4032 participants (mean age, 67.2 years; 60.4% women) with infra-renal diameter assessment and without history of cardiovascular disease were included. Mean and quantile values of diameters were calculated in different age groups. Multiple linear regression analysis was used to detect the association of cardiovascular risk factors with diameters in men and women.

Results

The mean crude diameter was larger in men [mean (SD): 19.5 (2.6) mm] compared to women [17.0 (2.4)mm] but after adjustment for body surface area (BSA), the differences were small. There was a non-linear relationship between age and diameter (p&lt;0.001). After 66 years of age, the increase in diameter with increasing age was attenuated. After age 74 years in women and 71 years in men, the relationship between age and infra-renal aortic diameter was no longer statistically significant (Figure). Waist [standardized β (95% CI): 0.02 (0.0–0.04) in women and 0.03 (0.01–0.06) in men] and diastolic blood pressure [0.04 (0.02–0.05) in women and 0.02 (0.0–0.04) in men] were the risk factors for diameters in both sexes. Body mass index [0.02 (0.01–0.09)], systolic blood pressure [−0.01 (−0.02 to −0.01)], smoking status [0.21 (0.02–0.39)], cholesterol [−0.19 (−0.29 to −0.09)], and lipid-lowering medication [−0.47 (−0.71 to −0.23)] were significantly associated with aortic diameter only in women.

Conclusion

The differences in the crude abdominal aortic diameter between women and men diminished after taking into account the BSA. The abdominal aortic diameter increased steeply with advancing age and up to 66 years of age. However, after 74 years in women and 71 years in men, the diameter values reached a plateau. We also observed sex differences in the associations of cardiovascular risk factors with abdominal aortic diameter.

Funding Acknowledgement

Type of funding source: Public Institution(s). Main funding source(s): Netherlands Organization for the Health Research and Development (ZonMw); the Research Institute for Diseases in the Elderly (RIDE)

Comparative Study of Selenides and Tellurides of Transition Metals (Nb and Ta) with Respect to its Catalytic, Antimicrobial, and Molecular Docking Performance

The present research is a comparative study that reports an economical and accessible method to synthesize niobium (Nb) and Tantalum (Ta) selenides and tellurides with useful application in the removal of pollutants in textile, paper, and dyeing industries as well as in medical field. In this study, solid-state process was used to generate nanocomposites and various characterization techniques were employed to compare two groups of materials under investigation. Structure, morphology, elemental constitution, and functional groups of synthesized materials were analyzed with XRD, FESEM coupled with EDS, FTIR, and Raman spectroscopy, respectively. HR-TEM images displayed nanoscale particles with tetragonal and monoclinic crystal structures. The optical properties were evaluated in terms of cut-off wavelength and optical band gap using UV-visible spectroscopy. A comparative behavior of both groups of compounds was assessed with regards to their catalytic and microcidal properties. Extracted nanocomposites when used as catalysts, though isomorphs of each other, showed markedly different behavior in catalytic degradation of MB dye in the presence of NaBH₄ that was employed as a reducing agent. This peculiar deviation might be attributed to slight structural differences between them. Escherichia coli and Staphylococcus aureus (G -ve and + ve bacteria, respectively) were designated as model strains for in vitro antibacterial tests of both clusters by employing disk diffusion method. Superior antibacterial efficacy was observed for telluride system (significant inhibition zones of 26-35 mm) compared with selenide system (diameter of inhibition zone ranged from 0.8 mm to 1.9 mm). In addition, molecular docking study was undertaken to ascertain the binding interaction pattern between NPs and active sites in targeted cell protein. The findings were in agreement with antimicrobial test results suggesting NbTe₄ to be the best inhibitor against FabH and FabI enzymes.

Dye degradation performance, bactericidal behavior and molecular docking analysis of Cu-doped TiO2 nanoparticles

Copper-doped TiO2 was prepared with a sol-gel chemical method. Various concentrations (3, 6, and 9 wt%) of Cu dopant were employed. Several techniques were implemented to assess the structural, optical, morphological and chemical properties of the synthesized samples. Evaluation of elemental composition using SEM-EDS and XRF techniques showed the presence of dopant element in the prepared samples. XRD analysis confirmed the presence of anatase (TiO2) phase with interstitial doping. Incorporation of dopant was observed to enhance the crystallinity and increase the crystallite size of the synthesized products. SAED profiles revealed a high degree of crystallinity in the prepared specimens, which was also evident in the XRD spectra. Optical properties studied using UV-vis spectroscopy depicted a shift of the maximum absorption to the visible region (redshift) that signified a reduction in the band gap energy of Cu-doped TiO2 samples. Examination of morphological features with scanning and high-resolution transmission electron microscopes revealed the formation of spherical nanoparticles with a tendency to agglomerate with increasing dopant concentration. Molecular vibrations and the formation of Ti-O-Ti bonds were revealed through FTIR spectra. PL spectroscopy recorded the trapping efficiency and migration of charge carriers, which exhibited electron-hole recombination behavior. Doped nanostructures showed enhanced bactericidal performance and synergism against S. aureus and E. coli. In summary, Cu-doped TiO2 nanostructures were observed to impede bacteria effectively, which is deemed beneficial in overcoming ailments caused by pathogens such as microbial etiologies. Furthermore, molecular docking analysis was conducted to study the interaction of Cu-doped TiO2 nanoparticles with multiple proteins namely β-lactamase (binding score: -4.91 kcal mol-1), ddlB (binding score: -5.67 kcal mol-1) and FabI (binding score: -6.13 kcal mol-1) as possible targets with active site residues. Dye degradation/reduction of control and Cu-doped samples were studied through absorption spectroscopy. The obtained outcomes of the performed experiment indicated that the photocatalytic activity of Cu-TiO2 enhanced with increasing dopant concentration, which is thought to be due to a decreased rate of electron-hole pair recombination. Consequently, it is suggested that Cu-TiO2 can be exploited as an effective candidate for antibacterial and dye degradation applications.

Synergistic effect of Bi-doped exfoliated MoS2 nanosheets on their bactericidal and dye degradation potential

Nanosheets incorporated with biological reducing agents are widely used to minimize the toxic effects of chemicals. Biologically amalgamated metal oxide nanomaterials have crucial importance in nanotechnology. In this study, bare and bismuth (Bi)-doped molybdenum disulfide (MoS2) nanosheets were synthesized via a hydrothermal method. Different Bi weight ratios of 2.5, 5, 7.5 and 10% were incorporated in a fixed amount of MoS2 to evaluate its catalytic and antimicrobial activities. Doped nanosheets were characterized using XRD, FTIR and UV-vis spectroscopy, FESEM, HRTEM, Raman, PL, DSC/TGA, EDX, XRF and XPS analysis. The XRD spectra confirmed that the doped nanosheets exhibit a hexagonal structure and their crystallite size increases gradually upon doping. The morphology and interlayer d-spacing of doped MoS2 were determined by FESEM and HRTEM. The presence of functional groups in the doped nanosheets was confirmed using FTIR, PL and Raman analysis. The absorption intensity increased and the corresponding measured band gap energy decreased with doping. The thermal stability and weight loss behaviour of the prepared samples were studied using DSC/TGA. The doped MoS2 nanosheets showed a higher catalytic potential compared to undoped MoS2. The doped Bi nanosheets exhibited higher antimicrobial activity against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) at different concentrations of Bi (0.075 and 0.1), showing a tendency to counter the emerging drug resistance against pathogenic bacterial diseases. Consequently, significant inhibition zones were recorded against (MDR) S. aureus ranging from 2.25 to 3.3 mm and 3.25 to 5.05 mm at low and high concentrations of doped-Bi nanosheets and against Gram-negative E. coli ranging from 1 to 1.45 mm at high concentrations. In conclusion, the Bi-doped MoS2 nanocomposite has exhibited significant potential for use in industrial dye degradation applications. Its antibacterial properties can also mitigate health risks associated with the presence of several well-known pathogens in the environment.

Bactericidal behavior of chemically exfoliated boron nitride nanosheets doped with zirconium

In this work, boron nitride nanosheets (BNNS) were produced through chemical exfoliation of bulk boron nitride (BN). Furthermore, hydrothermal technique was used to incorporate various concentrations (2.5, 5, 7.5, and 10 wt%) of zirconium (Zr) as a dopant. The prepared undoped and doped BN samples were evaluated for its antimicrobial activity against E. coli and S. aureus. Structural analysis was undertaken using x-ray diffraction which identified the presence of hexagonal BN. FTIR and Raman spectroscopy were utilized to outline IR fingerprint and electronic properties of the synthesized material. Morphological information was obtained through micrographs extracted using field emission scanning electron spectroscope (FESEM) and high resolution transmission electron microscope (HRTEM), while d-spacing was also calculated through HRTEM analysis. Optical properties and emission spectra were examined by applying UV–vis and photoluminescence spectroscope (PL); whereas, band gap analysis was carried out via Tauc plot. Zr-doped BN nanosheets at increasing concentrations (0.5, 1.0 mg/50 μl) revealed enhanced antibacterial activity against E. coli compared to S. aureus (p < 0.05).

Bimetallic Ag/Cu incorporated into chemically exfoliated MoS2 nanosheets to enhance its antibacterial potential: in silico molecular docking studies

Bimetallic Ag and Cu (1:1 wt%) nanoparticles (NPs) were synthesized and annealed at temperatures of 400 °C, 600 °C, and 800 °C using chemical reduction techniques. High temperature annealed (at 800 °C) Ag:Cu sample ratios (5 and 10 wt%) were used to dope MoS₂. A wide variety of techniques including X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning, high resolution transmission electron microscopy, differential scanning calorimetry, thermogravimetric analysis, Raman, photoluminescence, and ultraviolet visible spectrophotometry were used to study the morphology, structure, functional groups, excitons recombination, and thermal and optical properties of both annealed and doped samples. The antimicrobial activity of the prepared products was tested on the MRSA-superbug with ciprofloxacin antibiotic as the reference drug. Statistically significant (P < 0.05) inhibition zones (mm) were recorded for the as-synthesized Ag-Cu, heat-treated samples at 400 °C, 600 °C, and 800 °C, doped Ag-Cu/MoS₂ 5% and Ag-Cu/MoS₂ 10% which ranged from 6.35-9.85 mm and 8.60-11.75 mm at (0.5, 1.0 mg 50 μl^-1) concentrations compared with ciprofloxacin 12.55 mm and DIW 0 mm inhibition zones, respectively. Overall Ag-Cu NPs alone and with different temperature treatments showed less antibacterial efficacy compared with Ag-Cu/MoS₂ 5% and 10%. Furthermore, molecular docking studies were employed to unveil the binding interaction pattern of NPs in the active pocket of β-lactamase enzyme suggested that it could be a potential inhibitor that could be further evaluated for its enzyme inhibition characteristics.

Application of Chemically Exfoliated Boron Nitride Nanosheets Doped with Co to Remove Organic Pollutants Rapidly from Textile Water

Two-dimensional layered materials doped with transition metals exhibit enhanced magnetization and improved catalytic stability during water treatment leading to potential environmental applications across several industrial sectors. In the present study, cobalt (Co)-doped boron nitride nanosheets (BN-NS) were explored for such an application. Chemical exfoliation process was used to exfoliate BN-NS and the hydrothermal route was adopted to incorporate Co dopant in various concentrations (e.g., 2.5, 5, 7.5, and 10 wt%). X-ray diffraction (XRD) study indicated that crystallinity improved upon doping with the formation of a hexagonal phase of the synthesized material. Selected area electron diffraction (SAED) confirmed enhanced crystallinity, which corroborates XRD results. Interlayer spacing was evaluated through a high-resolution transmission electron microscope (HR-TEM) equipped with Gatan digital micrograph software. Compositional and functional group analysis was undertaken with energy dispersive X-ray (EDS) and Fourier transform infrared (FTIR) spectroscopy, respectively. Field emission scanning electron microscope (FE-SEM) and HR-TEM were utilized to probe surface morphologies of prepared samples. Bonding modes in the sample were identified through Raman analysis. Optical properties were examined using UV-vis spectroscopy. Photoluminescence spectra were acquired to estimate the separation and recombination of excitons. Magnetic properties were studied by means of hysteresis loop acquired using VSM measurements. Methylene blue dye was degraded with as-prepared host and doped nanosheets used as catalysts and investigated through absorption spectra ranging from 250 to 800 nm. The experimental results of this study indicate that Co-doped BN-NS showed enhanced magnetic properties and can be used to degrade dyes present as an effluent in industrial wastewater.

TiO2 Co-doped with Zr and Ag shows highly efficient visible light photocatalytic behavior suitable for treatment of polluted water

The objective of this study is to analyze the effects of zirconium (Zr) and silver (Ag) doping on the photoactivity of titania (TiO₂). Zr–Ag (ZA) co-doped TiO₂ products were fabricated via sol–gel technique and their properties (structural and chemical) were characterized. The weight ratio of TiO₂ was fixed, while weight ratios of Zr and Ag were varied from 2 to 4, 6 and 8 wt% while synthesized samples were calcined at 400 °C for 3 h. The XRD results demonstrated that the incorporation of metal doping agents failed to alter the host material's lattice structure, however, its crystallite size was reduced from 13.54 to 5.05 nm with increasing Zr⁴⁺ and Ag⁺ concentrations. FTIR spectroscopy was used to examine various functional groups. In the attained spectra, an ample absorption peak between 500 and 1000 cm⁻¹ was recorded, which was ascribed to Ti–O–Ti linkage vibration mode present within TiO₂. Surface morphology, microstructure, SAED patterns and elemental composition were examined with FE-SEM, HR-TEM and EDX, which served to confirm the ZA-doped TiO₂ product. Band gap energy of the co-doped material was significantly reduced as indicated by a higher wavelength redshift in the spectra. The photoactivity and kinetics of photo-products were investigated by observing photo-decolorization of methylene blue (MB) under a radiation source. Photodecomposition of MB was dramatically enhanced when titania co-doped with Zr and Ag was employed compared to un-doped or mono-doped TiO₂. The ZA (8 wt%) co-doped TiO₂ photocatalyst depicted the maximum MB removal efficiency (∼93%) within 90 min under a light source.

The objective of this study is to analyze the effects of zirconium (Zr) and silver (Ag) doping on the photoactivity of titania (TiO₂).

Promising performance of chemically exfoliated Zr-doped MoS2 nanosheets for catalytic and antibacterial applications

Nanostructured materials incorporated with biological reducing agents have shown significant potential for use in bactericidal applications. Such materials have also demonstrated considerable efficacy to counter effects of chemical toxicity. In this study, nanostructured molybdenum disulfide (MoS₂) was doped with various concentrations (2.5, 5, 7.5, 10 wt%) of zirconium (Zr) using a hydrothermal route in order to assess its antimicrobial and catalytic potential. Doped and control samples were characterized with various techniques. X-ray diffraction (XRD) analysis confirmed the presence of the hexagonal phase of MoS₂ and identification of various functional groups and characteristic peaks (Mo bonding) was carried out using FTIR spectra. Micrographs obtained from FESEM and HR-TEM showed a sheet-like surface morphology, while agglomeration of nanosheets was observed upon doping with nanoparticles. To seek further clarity regarding the layered features of S–Mo–S planes, the defect densities and electronic band structure of pure MoS₂ and doped MoS₂ samples were investigated through Raman analysis. Optical properties of Zr-doped MoS₂ nanosheets were assessed using a UV-vis spectrophotometer and the results indicated a red-shift, i.e., movement of peaks towards longer wavelengths, of the material. Dynamics of migration and recombination of excited electron–hole pairs were investigated using PL spectroscopy, which was also used to confirm the presence of exfoliated nanosheets. In addition, the synthetic dye degradation potential of pure and doped samples was investigated in the presence of a reducing agent (NaBH₄). It was noted that doped MoS₂ showed superior catalytic activity compared to undoped MoS₂. The nanocatalyst synthesized in this study exhibited enhanced antibacterial activity against E. coli and S. aureus at high concentrations (0.5, 1.0 mg/50 μl). The present study suggests a cost-effective and environmentally friendly material that can be used to remove toxins such as synthetic dyes and tannery pollutants from industrial wastewater.

Nanostructured materials incorporated with biological reducing agents have shown significant potential for use in bactericidal applications.

Photocatalytic and bactericidal properties and molecular docking analysis of TiO2 nanoparticles conjugated with Zr for environmental remediation

Despite implementing several methodologies including a combination of physical, chemical and biological techniques, aquatic and microbial pollution remains a challenge to this day. Recently, nanomaterials have attracted considerable attention due to their extraordinary prospective for utilization toward environmental remediation. Among several probable candidates, TiO₂ stands out due to its potential for use in multifaceted applications. One way to improve the catalytic and antimicrobial potential of TiO₂ is to dope it with certain elements. In this study, Zr-doped TiO₂ was synthesized through a sol–gel chemical method using various dopant concentrations (2, 4, 6, and 8 wt%). Surface morphological, microstructural and elemental analysis was carried out using FESEM and HR-TEM along with EDS to confirm the formation of Zr–TiO₂. XRD spectra showed a linear shift of the (101) anatase peak to lower diffraction angles (from 25.4° to 25.08°) with increasing Zr⁴⁺ concentration. Functional groups were examined via FTIR, an ample absorption band appearing between 400 and 700 cm⁻¹ in the acquired spectrum was attributed to the vibration modes of the Ti–O–Ti linkage present within TiO₂ nanoparticles, which denotes the formation of TiO₂. Experimental results indicated that with increasing dopant concentrations, photocatalytic potential was enhanced significantly. In this respect, TiO₂ doped with 8 wt% Zr (sample 0.08 : 1) exhibited outstanding performance by realizing 98% elimination of synthetic MB in 100 minutes. This is thought to be due to a decreased rate of electron–hole pair recombination that transpires upon doping. Therefore, it is proposed that Zr-doped TiO₂ can be used as an effective photocatalyst material for various environmental and wastewater treatment applications. The good docking scores and binding confirmation of Zr-doped TiO₂ suggested doped nanoparticles as a potential inhibitor against selected targets of both E. coli and S. aureus. Hence, enzyme inhibition studies of Zr-doped TiO₂ NPs are suggested for further confirmation of these in silico predictions.

Despite implementing several methodologies including a combination of physical, chemical and biological techniques, aquatic and microbial pollution remains a challenge to this day.

Quantitative analysis of Fuller's earth using laser-induced breakdown spectroscopy and inductively coupled plasma/optical emission spectroscopy

Fuller's earth, most commonly known as Multani Matti (clay) in Urdu, among its various utilizations is traditionally used in skin care cosmetics, particularly for removing blackheads and to treat oily skin. It is also used for improving skin complexion. In this paper, laser-induced breakdown spectroscopy (LIBS) was effectively employed for the quantitative investigation of various clay samples for their special uses. To get the LIBS spectra with an optimal signal-to-noise as well as for a more robust and accurate analytical investigation, different experimental parameters (laser energy, gate delay time, and the distance between target and focusing lens) were optimized before the experiments on actual samples. The analysis of emission spectra revealed the presence of many different elements, including Al, Ca, Fe, Mg, Mn, Na, K, Li, S, Si, and Zn. The electron number density and plasma temperatures were determined using the Stark broadened line profile and Boltzmann plot method, respectively. To determine the relative concentration of observed elements, we used an integrated intensity ratio method, integrated intensity of every line from all elements, and calibration free (CF)-LIBS. The prevailing condition of local thermodynamic equilibrium during the experimental executions was verified with multiple criteria. The spectral lines used in CF-LIBS were characterized for the influence from the self-absorption phenomenon, but the same was found insignificant. The findings of our LIBS system were found to agree excellently with the outcomes of the inductively coupled plasma/optical emission spectroscopy, thereby yielding a high statistical correlation factor and hence enlighten the significance of LIBS as a safe and reliable tool for elemental analysis of clay samples.

Compositional engineering of acceptors for highly efficient bulk heterojunction hybrid organic solar cells

The wet chemical synthesis of chromium oxide (Cr₂O₃) nanoparticles (NPs) and its application in active layer of inverted bulk heterojunction organic solar cells is documented in this research. Chromium oxide NPs of 10-30 nm size range having a band gap of 2.9 eV were successfully synthesized. These NPs were used in inverted organic solar cells in amalgamation with P3HT:PCBM and PTB7:PCBM polymers. The fabricated hybrid devices improves PCE significantly for P3HT:PCBM and PTB7:PCBM systems. The photophysical energy levels, optoelectrical properties and microscopic images have been systematically studied for the fabricated devices. The introduction of Cr₂O₃ nanoparticles (NPs) enhances light harvesting and tunes energy levels into improved electrical parameters. A clear red shift and improved absorption have been observed for ternary blended devices compared to that observed with controlled organic solar cells. Apparently, when the amount of NPs in the binary polymer blend exceeds the required optimum level, there is a breakdown of the bulk heterojunction leading to lowering of the optical and electrical performance of the devices.

High-performance solution-based CdS-conjugated hybrid polymer solar cells

In this study, hybrid BHJ – bulk heterojunction polymer solar cells were fabricated by incorporating CdS quantum dots (QDs) in a blend of P3HT (donor) and PCBM (acceptor) using dichlorobenzene and chlorobenzene as solvents. CdS QDs at various ratios were mixed in a fixed amount of the P3HT and PCBM blend. The prepared samples have been characterized by a variety of techniques such as I–V and EQE measurements, atomic force microscopy (AFM), scanning electron microscopy (SEM) and ultraviolet-visible (UV-vis) spectroscopy. The mixing of QDs in the polymer blends improved the PCE – power conversion efficiency of the solar cells under standard light conditions. The improved PCE from 2.95 to 4.41% is mostly due to the increase in the fill factor (FF) and short-circuit current (J_sc) of the devices with an optimum amount of CdS in the P3HT:PCBM blend. The increase in J_sc possibly originated from the formation of a percolation network of CdS. The conjugation of QDs has increased the absorption of the active layers in the visible region. These results well matched as reported, conjugation of CdS in the perovskite active layer increased the absorption and PCE of the devices relative to those of the perovskite films. This increment in parameters is attributed to the decrease in charge recombinations that improved the performance of the doped device.

In this study, hybrid BHJ – bulk heterojunction polymer solar cells were fabricated by incorporating CdS quantum dots (QDs) in a blend of P3HT (donor) and PCBM (acceptor) using dichlorobenzene and chlorobenzene as solvents.