Biomineralization of Polyelectrolyte-Functionalized Electrospun Fibers: Optimization and In Vitro Validation for Bone Applications

In recent years, polyelectrolytes have been successfully used as an alternative to non-collagenous proteins to promote interfibrillar biomineralization, to reproduce the spatial intercalation of mineral phases among collagen fibrils, and to design bioinspired scaffolds for hard tissue regeneration. Herein, hybrid nanofibers were fabricated via electrospinning, by using a mixture of Poly ɛ-caprolactone (PCL) and cationic cellulose derivatives, i.e., cellulose-bearing imidazolium tosylate (CIMD). The obtained fibers were self-assembled with Sodium Alginate (SA) by polyelectrolyte interactions with CIMD onto the fiber surface and, then, treated with simulated body fluid (SBF) to promote the precipitation of calcium phosphate (CaP) deposits. FTIR analysis confirmed the presence of SA and CaP, while SEM equipped with EDX analysis mapped the calcium phosphate constituent elements, estimating an average Ca/P ratio of about 1.33-falling in the range of biological apatites. Moreover, in vitro studies have confirmed the good response of mesenchymal cells (hMSCs) on biomineralized samples, since day 3, with a significant improvement in the presence of SA, due to the interaction of SA with CaP deposits. More interestingly, after a decay of metabolic activity on day 7, a relevant increase in cell proliferation can be recognized, in agreement with the beginning of the differentiation phase, confirmed by ALP results. Antibacterial tests performed by using different bacteria populations confirmed that nanofibers with an SA-CIMD complex show an optimal inhibitory response against S. mutans, S. aureus, and E. coli, with no significant decay due to the effect of CaP, in comparison with non-biomineralized controls. All these data suggest a promising use of these biomineralized fibers as bioinspired membranes with efficient antimicrobial and osteoconductive cues suitable to support bone healing/regeneration.

Physical and structural characterization of bis-acryl composite resin

During the preparation of fixed prosthesis (including individual bridges and crowns) it is important to select the materials that have the best features and properties to predict a successful clinical treatment. The objective of this study was to determine if the chemical and structural characteristics could cause to increase the fracture resistance, we used four bis-acryl resins Luxatemp, Protemp, Structur and Telio. Three-points bending by Flexural test were performed in ten bars and they were carried out to compare with Anova test. In addition, the bis-acryl resins were analyzed by scanning electron microscopy, to analyze microstructure and morphology and the molecular structure were performed by Infrared Spectroscopy through Attenuated Total Reflectance. A higher flexural strength was found in Luxatemp and Structur with, no significant differences between this study groups. Regarding Protemp and Telio, these study groups showed a lower flexural strength when were compared with Luxatemp and Structur. These results corroborate SEM and ATR analysis because Luxatemp sample showed a regular size particle on the surface and chemically presents a long cross-linkage polymer chain. The presence of CO3, SiO2 and N-H groups as a fillers particle interacting with OH groups cause a higher flexural strength compared with another groups.

Primary explants of the postnatal thymus allow the expansion of clonogenic thymic epithelial cells that constitute thymospheres

BACKGROUND

Thymic epithelial cells (TECs) are responsible for shaping the repertoires of T cells, where their postnatal regeneration depends on a subset of clonogenic TECs. Despite the implications for regenerative medicine, their cultivation and expansion remain challenging. Primary explant cell culture is a technique that allows the seeding and expansion of difficult-to-culture cells. Here, we report a reliable and simple culture system to obtain functional TECs and thymic interstitial cells (TICs).

METHODS

To establish primary thymic explants, we harvested 1 mm cleaned fragments of thymus from 5-week-old C57/BL6 mice. Tissue fragments of a complete thymic lobe were placed in the center of a Petri dish with 1 mL of DMEM/F-12 medium supplemented with 20% fetal bovine serum (FBS) and 1% penicillin‒streptomycin. To compare, thymic explants were also cultivated by using serum-free DMEM/F-12 medium supplemented with 10% KnockOut™.

RESULTS

We obtained high numbers of functional clonogenic TECs and TICs from primary thymic explants cultivated with DMEM/F-12 with 20% FBS. These cells exhibited a highly proliferative and migration profile and were able to constitute thymospheres. Furthermore, all the subtypes of medullary TECs were identified in this system. They express functional markers to shape T-cell and type 2 innate lymphoid cells repertoires, such as Aire, IL25, CCL21 and CD80. Finally, we also found that ≥ 70% of lineage negative TICs expressed high amounts of Aire and IL25.

CONCLUSION

Thymic explants are an efficient method to obtain functional clonogenic TECs, all mTEC subsets and different TICs Aire+IL25+ with high regenerative capacity.

In Vitro Cell Interactions on PVDF Films: Effects of Surface Morphology and Polar Phase Transition

In recent years, several studies have validated the use of piezoelectric materials for in situ biological stimulation, opening new interesting insights for bio-electric therapies. In this work, we investigate the morphological properties of polyvinylidene fluoride (PVDF) in the form of microstructured films after temperature-driven phase transition. The work aims to investigate the correlations between morphology at micrometric (i.e., spherulite size) and sub-micrometric (i.e., phase crystallinity) scale and in vitro cell response to validate their use as bio-functional interfaces for cellular studies. Morphological analyses (SEM, AFM) enabled evidence of the peculiar spherulite-like structure and the dependence of surface properties (i.e., intra-/interdomain roughness) upon process conditions (i.e., temperature). Meanwhile, chemical (i.e., FTIR) and thermal (i.e., DSC) analyses highlighted an influence of casting temperature and polymer solution on apolar to polar phases transition, thus affecting in vitro cell response. Accordingly, in vitro tests confirmed the relationship between micro/sub-microstructural properties and hMSC response in terms of adhesion and viability, thus suggesting a promising use of PVDF films to model, in perspective, in vitro functionalities of cells under electrical stimuli upon mechanical solicitation.

Highly polydisperse keratin rich nanofibers: Scaffold design and in vitro characterization

The use of bioactive proteins such as keratin has been successfully explored to improve the biological interface of scaffolds with cells during the tissue regeneration. In this work, it is optimized the fabrication of nanofibers combining wool keratin extracted by sulfitolysis, with polycaprolactone (PCL) in order to design bicomponent fibrous matrices able to exert a self-adapting pattern of signals-morphological, chemical, or physical-confined at the single fiber level, to influence cell and bacteria interactions. It is demonstrated that the blending of highly polydisperse keratin with PCL (50:50) improves the stability of the electrospinning process, promoting the formation of nanofibers-144.1 ± 43.9 nm-without the formation of defects (i.e., beads, ribbons) typically recognized in the fabrication of keratin ones. Moreover, keratin drastically increases the fiber hydrophilicity-compared with PCL fiber alone-thus improving the hMSC adhesion and in vitro proliferation until 14 days. Moreover, the growth of bacterial strains (i.e., Escherichia coli and Staphylococcus aureus) seems to be not specifically inhibited by the contribution of keratin, so that the integration of further selected compounds (i.e., metal ions) is suggested to more efficiently fight against bacteria resistance, to make them suitable for the regeneration of different interfaces and soft tissues (i.e., skin and cornea). © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1803-1813, 2019.

Effects on growth and osteogenic differentiation of mesenchymal stem cells by the strontium-added sol-gel hydroxyapatite gel materials

In the present study, strontium-modified hydroxyapatite gels (Sr-HA) at different concentrations were prepared using sol-gel approach and their effect on human-bone-marrow-derived mesenchymal stem cells, were evaluated. The effect of Strontium on physico-chemical and morphological properties of hydroxyapatite gel were evaluated. Morphological analyses (SEM and TEM) demonstrate that an increasing in the amount of Sr ions doped into HA made the agglomerated particles smaller. The substitution of large Sr2+ for small Ca2+ lead to denser atomic packing of the system causing retardation of crystals growth. The biological results demonstrated that hydroxyapatite gel containing from 0 to 20 mol% of Sr presented no cytotoxicity and promote the expression of osteogenesis related genes including an early marker for osteogenic differentiation ALP; a non-collagen protein OPN and a late marker for osteogenic differentiation OCN. Finally, the Sr-HA gels could have a great potential application as filler in bone repair and regeneration and used in especially in the osteoporotic disease.

Bioactivation of calcium deficient hydroxyapatite with foamed gelatin gel. A new injectable self-setting bone analogue

An alternative approach to bone repair for less invasive surgical techniques, involves the development of biomaterials directly injectable into the injury sites and able to replicate a spatially organized platform with features of bone tissue. Here, the preparation and characterization of an innovative injectable bone analogue made of calcium deficient hydroxyapatite and foamed gelatin is presented. The biopolymer features and the cement self-setting reaction were investigated by rheological analysis. The porous architecture, the evolution of surface morphology and the grains dimension were analyzed with electron microscopy (SEM/ESEM/TEM). The physico-chemical properties were characterized by X-ray diffraction and FTIR analysis. Moreover, an injection test was carried out to prove the positive effect of gelatin on the flow ensuing that cement is fully injectable. The cement mechanical properties are adequate to function as temporary substrate for bone tissue regeneration. Furthermore, MG63 cells and bone marrow-derived human mesenchymal stem cells (hMSCs) were able to migrate and proliferate inside the pores, and hMSCs differentiated to the osteoblastic phenotype. The results are paving the way for an injectable bone substitute with properties that mimic natural bone tissue allowing the successful use as bone filler for craniofacial and orthopedic reconstructions in regenerative medicine.

Trapping tetracycline-loaded nanoparticles into polycaprolactone fiber networks for periodontal regeneration therapy

The controlled delivery of antibiotics, anti-inflammatory agents, or chemotherapeutic agents to the periodontal site is a recognized strategy to improve the efficiency of regenerative processes of hard tissues. A novel approach based on the trapping of tetracycline hydrochloride–loaded particles in polycaprolactone nanofibers was used to guide the regeneration processes of periodontal tissue at the gum interface. Chitosan nanoparticles loaded with different levels of tetracycline hydrochloride (up to 5% wt) were prepared by solution nebulization induced by electrical forces (i.e. electrospraying). The fine tuning of process parameters allows to obtain nanoparticles with tailored sizes ranging from 0.485 ± 0.147 µm to 0.639 ± 0.154 µm. The tetracycline hydrochloride release profile had a predominant burst effect for the first 70% of release followed by a relatively slow release over 24 h, which is promising for oral drug delivery. We also demonstrated that trapping tetracycline hydrochloride–loaded particles with submicrometer diameters into a polycaprolactone fiber network contributed to slowing the release of tetracycline hydrochloride from the nanoparticles, thus providing a more prolonged release in the periodontal pocket during clinical therapy. Preliminary studies on human mesenchymal stem cells confirm the viability of cells up to 5 days after culture, and thereby, validate the use of nanoparticle-/nanofiber-integrated systems in periodontal therapies.

Basic protocols to investigate hMSC behavior onto electrospun fibers

Human mesenchymal stem cells (hMSC) currently represent a major cell resource in the research laboratory, to study differentiated-cell behavior in 3D scaffolds during the regeneration processes. Adhesion and differentiation of stem cells to a specific phenotype are achieved by culturing them in apposite culture media under precise conditions. Meanwhile, hydrolytic degradation of polymeric scaffolds allows implanted cells to synthesize their own extracellular matrix in situ after implantation so that the degeneration of the foreign scaffold is temporally matched by creation of the new innate one. In this context, structural properties and biochemical signals may concur to influence the cell response to the environmental stimuli during the culture. So, it becomes mandatory to introduce robust protocols to treat hMSC alone-before the culture-and in combination with the scaffolds for the next investigation by scanning electron microscopy. Here, we describe the protocols used to manage hMSC before and during the culture in order to obtain more detailed information on cell mechanisms mediated by polymeric scaffolds.

Osteogenic differentiation and mineralization in fibre-reinforced tubular scaffolds: theoretical study and experimental evidences

The development of composite scaffolds with well-organized architecture and multi-scale properties (i.e. porosity, degradation) represents a valid approach for achieving a tissue-engineered construct capable of reproducing the medium- and long-term in vitro behaviour of hierarchically complex tissues such as spongy bone. To date, the implementation of scaffold design strategies able to summarize optimal scaffold architecture as well as intrinsic mechanical, chemical and fluid transport properties still remains a challenging issue. In this study, poly ε-caprolactone/polylactid acid (PCL/PLA) tubular devices (fibres of PLA in a PCL matrix) obtained by phase inversion/salt leaching and filament winding techniques were proposed as cell instructive scaffold for bone osteogenesis. Continuous fibres embedded in the polymeric matrix drastically improved the mechanical response as confirmed by compression elastic moduli, which vary from 0.214 ± 0.065 to 1.174 ± 0.143 MPa depending on the relative fibre/matrix and polymer/solvent ratios. Moreover, computational fluid dynamic simulations demonstrated the ability of composite structure to transfer hydrodynamic forces during in vitro culture, thus indicating the optimal flow rate conditions that, case by case, enables specific cellular events-i.e. osteoblast differentiation from human mesenchymal stem cells (hMSCs), mineralization, etc. Hence, we demonstrate that the hMSC differentiation preferentially occurs in the case of higher perfusion rates-over 0.05 ml min(-1)-as confirmed by the expression of alkaline phosphate and osteocalcin markers. In particular, the highest osteopontin values and a massive mineral phase precipitation of bone-like phases detected in the case of intermediate flow rates (i.e. 0.05 ml min(-1)) allows us to identify the best condition to stimulate the bone extracellular matrix in-growth, in agreement with the hydrodynamic model prediction. All these results concur to prove the succesful use of tubular composite as temporary device for long bone treatment.

MgCHA particles dispersion in porous PCL scaffolds: in vitro mineralization and in vivo bone formation

In this work, we focus on the in vitro and in vivo response of composite scaffolds obtained by incorporating Mg,CO3 -doped hydroxyapatite (HA) particles in poly(ε-caprolactone) (PCL) porous matrices. After a complete analysis of chemical and physical properties of synthesized particles (i.e. SEM/EDS, DSC, XRD and FTIR), we demonstrate that the Mg,CO3 doping influences the surface wettability with implications upon cell-material interaction and new bone formation mechanisms. In particular, ion substitution in apatite crystals positively influences the early in vitro cellular response of human mesenchymal stem cells (hMSCs), i.e. adhesion and proliferation, and promotes an extensive mineralization of the scaffold in osteogenic medium, thus conforming to a more faithful reproduction of the native bone environment than undoped HA particles, used as control in PCL matrices. Furthermore, we demonstrate that Mg,CO3 -doped HA in PCL scaffolds support the in vivo cellular response by inducing neo-bone formation as early as 2 months post-implantation, and abundant mature bone tissue at the sixth month, with a lamellar structure and completely formed bone marrow. Together, these results indicate that Mg(2+) and CO3 (2-) ion substitution in HA particles enhances the scaffold properties, providing the right chemical signals to combine with morphological requirements (i.e. pore size, shape and interconnectivity) to drive osteogenic response in scaffold-aided bone regeneration.

Tuning size scale and crystallinity of PCL electrospun fibres via solvent permittivity to address hMSC response

The effect of solvent permittivity on the fibre morphology of PCL electrospun membranes for tissue engineering applications is studied. Morphological results indicate that polar solvents with higher permittivity are able to promote the formation of sub-micrometric fibres, while apolar solvents yield microfibres with an average fibre diameter of 2.86 ± 0.31 µm. Polymer/solvent interactions and electrospinning process parameters influence the mechanism of fibre and bead formation. It is shown that the dielectric properties of solvents influence the fibre size scale and crystallinity and directly contribute to the biological response of stem cells. Solvent permittivity is a key factor in controlling the morphological and physical properties of electrospun fibre meshes.

Optimizing PANi doped electroactive substrates as patches for the regeneration of cardiac muscle

In scaffold aided regeneration of muscular tissue, composite materials are currently utilized as a temporary substrate to stimulate tissue formation by controlled electrochemical signals as well as continuous mechanical stimulation until the regeneration processes are completed. Among them, composites from the blending of conductive (CPs) and biocompatible polymers are powerfully emerging as a successful strategy for the regeneration of myocardium due to their unique conductive and biological recognition properties able to assure a more efficient electroactive stimulation of cells. Here, different composite substrates made of synthesized polyaniline (sPANi) and polycaprolactone (PCL) were investigated as platforms for cardiac tissue regeneration. Preliminary, a comparative analysis of substrates conductivity performed on casted films endowed with synthesized polyaniline (sPANi) short fibres or blended with emeraldine base polyaniline (EBPANi) allows to study the attitude of charge transport, depending on the conducting filler amount, shape and spatial distribution. In particular, conducibility tests indicated that sPANi short fibres provide a more efficient transfer of electric signal due to the spatial organization of electroactive needle-like phases up to form a percolative network. On the basis of this characterization, sPANi/PCL electrospun membranes have been also optimized to mimic either the morphological and functional features of the cardiac muscle ECM. The presence of sPANi does not relevantly affect the fibre architecture as confirmed by SEM/image analysis investigation which shows a broader distribution of fibres with only a slight reduction of the average fibre diameter from 7.1 to 6.4 μm. Meanwhile, biological assays--evaluation of cell survival rate by MTT assay and immunostaining of sarcomeric α-actinin of cardiomyocites-like cells--clearly indicate that conductive signals offered by PANi needles, promote the cardiogenic differentiation of hMSC into cardiomyocite-like cells. These preliminary results concur to promise the development of electroactive biodegradable substrates able to efficiently stimulate the basic cell mechanisms, paving the way towards a new generation of synthetic patches for the support of the regeneration of damaged myocardium.