Structural and functional studies on Salmonella typhimurium pyridoxal kinase: the first structural evidence for the formation of Schiff base with the substrate

A large number of enzymes depend on the ubiquitous cofactor pyridoxal 5' phosphate (PLP) for their activity. Pyridoxal kinase (PLK) is the key enzyme involved in the synthesis of PLP from the three forms of vitamin B₆ via the salvage pathway. In the present work, we determined the unliganded structure of StPLK in a monoclinic form and its ternary complex with bound pyridoxal (PL), ADP and Mg²⁺ in two different tetragonal crystal forms (Form I and Form II). We found that, in the ternary complex structure of StPLK, the active site Lys233 forms a Schiff base linkage with the substrate (PL). Although formation of a Schiff base with the active site Lys229 was demonstrated in the Escherichia coli enzyme based on biochemical studies, the ternary complex of StPLK represents the first crystal structure where the Schiff bond formation has been observed. We also identified an additional site for PLP binding away from the active site in one of the ternary complexes (crystal Form I), suggesting a probable route for the product release. This is the first ternary complex structure where the modeled γ-phosphate of ATP is close enough to PL for the phosphorylation of the substrate. StPLK prefers PL over pyridoxamine as its substrate and follows a sequential mechanism of catalysis. Surface plasmon resonance studies suggest that StPLK interacts with apo-PLP-dependent enzymes with μm affinity supporting the earlier proposed direct transfer mechanism of PLP from PLK to PLP-dependent enzymes.

Structural and functional insights into phosphomannose isomerase: the role of zinc and catalytic residues

Phosphomannose isomerase (PMI) is a housekeeping enzyme that is found in organisms ranging from bacteria to fungi to mammals and is important for cell-wall synthesis, viability and signalling. PMI is a zinc-dependent enzyme that catalyses the reversible isomerization between mannose 6-phosphate (M6P) and fructose 6-phosphate (F6P), presumably via the formation of a cis-enediol intermediate. The reaction is hypothesized to involve ring opening of M6P, the transfer of a proton from the C2 atom to the C1 atom and between the O1 and O2 atoms of the substrate, followed by ring closure resulting in the product F6P. Several attempts have been made to decipher the role of zinc ions and various residues in the catalytic function of PMI. However, there is no consensus on the catalytic base and the mechanism of the reaction catalyzed by the enzyme. In the present study, based on the structure of PMI from Salmonella typhimurium, site-directed mutagenesis targeting residues close to the bound metal ion and activity studies on the mutants, zinc ions were shown to be crucial for substrate binding. These studies also suggest Lys86 as the most probable catalytic base abstracting the proton in the isomerization reaction. Plausible roles for the highly conserved residues Lys132 and Arg274 could also be discerned based on comparison of the crystal structures of wild-type and mutant PMIs. PMIs from prokaryotes possess a low sequence identity to the human enzyme, ranging between 30% and 40%. Since PMI is important for the virulence of many pathogenic organisms, the identification of catalytically important residues will facilitate its use as a potential antimicrobial drug target.

Development of sesbania mosaic virus nanoparticles for imaging

The capsids of viruses have a high degree of symmetry. Therefore, virus nanoparticles (VNPs) can be programmed to display many imaging agents precisely. Plant VNPs are biocompatible, biodegradable and non-infectious to mammals. We have carried out bioconjugation of sesbania mosaic virus (SeMV), a well characterized plant virus, with fluorophores using reactive lysine-N-hydroxysuccinimide ester and cysteine-maleimide chemistries. Monitoring of cellular internalization of labelled SeMV nanoparticles (NPs) by confocal microscopy and flow cytometry showed that the particles have a natural preference for entry into MDA-MB-231 (breast cancer) cells, although they could also enter various other cell lines. The fluorescence of SeMV NPs labelled via the cysteines with Cy5.5 dye was found to be more stable and was detectable with greater sensitivity than that of particles labelled via the lysines with Alexa Fluor. Live-cell imaging using SeMV internally labelled with Cy5.5 showed that it could bind to MDA-MB-231 cells in less than 5 minutes and enter the cells within 15 minutes. The particles undergo endolysosomal degradation by 6 h as evidenced by their co-localization with LAMP-1. Far-western blot analysis with a HeLa cell membrane protein fraction showed that SeMV interacts with 54-, 35- and 33-kDa proteins, which were identified by mass spectrometry as vimentin, voltage-dependent anion-selective channel protein (VDAC1), and annexin A2 isoform 2 (ANXA2), respectively, suggesting that the particles may bind and enter the cell through these proteins. The results presented here demonstrate that the SeMV NPs provide a new platform technology that could be used to develop in vivo imaging and targeted drug delivery agents for cancer diagnosis and therapy.

Structural and biophysical characterization of Rv3716c, a hypothetical protein from Mycobacterium tuberculosis

Latent tuberculosis (TB) is the main hurdle in reaching the goal of "Stop TB 2050". Tuberculin skin and Interferon-gamma release assay tests used currently for the diagnosis of TB infection cannot distinguish between active disease and latent tuberculosis infection (LTBI) and hence new and sensitive protein markers need to be identified for the diagnosis. A protein Rv3716c from Mycobacterium tuberculosis (MtbRv3716c) has been identified as a potential surrogate marker for the diagnosis of LTBI. Here, we present characterization of MtbRv3716c (∼13 kDa) using both biophysical and X-Ray crystallographic methods. EMSA study showed that MtbRv3716c binds to double stranded DNA. X-ray diffraction data collected on a crystal of MtbRv3716c at 1.9 Å resolution was used for structure determination using the molecular replacement method. Significant electron density was not observed for the N-terminal 21 and C-terminal 41 residues in the final electron density map. The C- terminal disordered region is proline rich and displays characteristics of intrinsically disordered proteins. Although the crystal asymmetric unit contained a protomer, a tight dimer could be generated by the application of the crystal two-fold symmetry parallel to the b axis. Packing of dimers in the crystal is mediated by a cadmium ion (Cd²⁺) occurring at the interface of two dimers. Molecular packing analysis reveals large cavities that are probably occupied by the disordered segments of the N- and C-termini. Structural comparison with other homologous hypothetical DNA binding proteins (PDB codes: 1PUG, 1YBX) highlights structural features that might be significant for DNA binding.

Seeing but not believing: the structure of glycerol dehydrogenase initially assumed to be the structure of a survival protein from Salmonella typhimurium

The determination of the crystal structure of a mutant protein using phases based on a previously determined crystal structure of the wild-type protein is often a straightforward molecular-replacement protocol. Such a structure determination may be difficult if there are large-scale structural differences between the wild-type and mutant proteins. In this manuscript, an interesting case is presented of the unintentional crystallization of a contaminant protein which shared some structural features with the presumed target protein, leading to difficulties in obtaining a completely satisfactory molecular-replacement structure solution. It was not immediately evident that the initial structure solution was incorrect owing to the poor quality of the X-ray diffraction data and low resolution. The structure was subsequently determined by improving the quality of the data and following a sequence-independent MarathonMR protocol. The structure corresponded to that of glycerol dehydrogenase, which crystallized as a contaminant, instead of the presumed mutant of a survival protein encoded by Salmonella typhimurium. The reasons why a solution that appeared to be reasonable was obtained with an incorrect protein model are discussed. The results presented here show that a degree of caution is warranted when handling large-scale structure-determination projects.

Structure determination of contaminant proteins using the MarathonMR procedure

In the recent decades, essential steps of protein structure determination such as phasing by multiple isomorphous replacement and multi wave length anomalous dispersion, molecular replacement, refinement of the structure determined and its validation have been fully automated. Several computer program suites that execute all these steps as a pipeline operation have been made available. In spite of these great advances, determination of a protein structure may turn out to be a challenging task for a variety of reasons. It might be difficult to obtain multiple isomorphous replacement or multi wave length anomalous dispersion data or the crystal may have defects such as twinning or pseudo translation. Apart from these usual difficulties, more frequent difficulties have been encountered in recent years because of the large number of projects handled by structural biologists. These new difficulties usually result from contamination of the protein of interest by other proteins or presence of proteins from pathogenic organisms that could withstand the antibiotics used to prevent bacterial contamination. It could also be a result of poor book keeping. Recently, we have developed a procedure called MarathonMR that has the power to resolve some of these problems automatically. In this communication, we describe how the MarathonMR was used to determine four different protein structures that had remained elusive for several years. We describe the plausible reasons for the difficulties encountered in determining these structures and point out that the method presented here could be a validation tool for protein structures deposited in the protein data bank.

Determination of crystal structures of proteins of unknown identity using a marathon molecular replacement procedure: structure of Stenotrophomonas maltophilia phosphate-binding protein

During the past decade, the authors have collected a few X-ray diffraction data sets from protein crystals that appeared to be easy cases of molecular replacement but failed to yield structures even after extensive trials. Here, the use of a large-scale molecular replacement method that explores all structurally characterized domains as phasing models to determine the structure corresponding to two data sets collected at 1.9 and 2.3 Å resolution is reported. These two structures were of the same protein independently crystallized in 2007 and 2011. The structures derived are virtually identical and were found to consist of two compact globular domains connected by a hinge. The high resolution of one of these data sets enabled inference of the amino-acid sequence from the electron-density map. The deduced sequence is nearly identical to that of a protein from the multidrug-resistant bacterium Stenotrophomonas maltophilia. Although the structure of this protein has not been determined previously, it is homologous to the well studied DING proteins which mediate the cellular uptake of phosphate ions. The final electron-density maps from both of the data sets revealed a large density at the interface of the two globular domains that is likely to represent a phosphate ion. Thus, the structure is likely to be that of a phosphate-binding protein encoded by the S. maltophilia genome (SmPBP; PDB entry 5j1d). The nature of the phosphate-binding site of SmPBP closely resembles that of Pseudomonas fluorescens DING (PfluDING), which displays remarkable discrimination between the closely similar phosphate and arsenate ions. The results presented here illustrate that routine crystallization trials may occasionally lead to the serendipitous crystallization of a protein of unknown identity and brute-force molecular replacement through `fold space' might allow the identification of the unknown protein.

Crystal structure of a thiolase from Escherichia coli at 1.8 Å resolution

Thiolases catalyze the Claisen condensation of two acetyl-CoA molecules to give acetoacetyl-CoA, as well as the reverse degradative reaction. Four genes coding for thiolases or thiolase-like proteins are found in the Escherichia coli genome. In this communication, the successful cloning, purification, crystallization and structure determination at 1.8 Å resolution of a homotetrameric E. coli thiolase are reported. The structure of E. coli thiolase co-crystallized with acetyl-CoA at 1.9 Å resolution is also reported. As observed in other tetrameric thiolases, the present E. coli thiolase is a dimer of two tight dimers and probably functions as a biodegradative enzyme. Comparison of the structure and biochemical properties of the E. coli enzyme with those of other well studied thiolases reveals certain novel features of this enzyme, such as the modification of a lysine in the dimeric interface, the possible oxidation of the catalytic Cys88 in the structure of the enzyme obtained in the presence of CoA and active-site hydration. The tetrameric enzyme also displays an interesting departure from exact 222 symmetry, which is probably related to the deformation of the tetramerization domain that stabilizes the oligomeric structure of the protein. The current study allows the identification of substrate-binding amino-acid residues and water networks at the active site and provides the structural framework required for understanding the biochemical properties as well as the physiological function of this E. coli thiolase.

Connecting Active-Site Loop Conformations and Catalysis in Triosephosphate Isomerase: Insights from a Rare Variation at Residue 96 in the Plasmodial Enzyme

Despite extensive research into triosephosphate isomerases (TIMs), there exists a gap in understanding of the remarkable conjunction between catalytic loop-6 (residues 166-176) movement and the conformational flip of Glu165 (catalytic base) upon substrate binding that primes the active site for efficient catalysis. The overwhelming occurrence of serine at position 96 (98% of the 6277 unique TIM sequences), spatially proximal to E165 and the loop-6 residues, raises questions about its role in catalysis. Notably, Plasmodium falciparum TIM has an extremely rare residue--phenylalanine--at this position whereas, curiously, the mutant F96S was catalytically defective. We have obtained insights into the influence of residue 96 on the loop-6 conformational flip and E165 positioning by combining kinetic and structural studies on the PfTIM F96 mutants F96Y, F96A, F96S/S73A, and F96S/L167V with sequence conservation analysis and comparative analysis of the available apo and holo structures of the enzyme from diverse organisms.

Intracellular delivery of antibodies by chimeric Sesbania mosaic virus (SeMV) virus like particles

The therapeutic potential of antibodies has not been fully exploited as they fail to cross cell membrane. In this article, we have tested the possibility of using plant virus based nanoparticles for intracellular delivery of antibodies. For this purpose, Sesbania mosaic virus coat protein (CP) was genetically engineered with the B domain of Staphylococcus aureus protein A (SpA) at the βH-βI loop, to generate SeMV loop B (SLB), which self-assembled to virus like particles (VLPs) with 43 times higher affinity towards antibodies. CP and SLB could internalize into various types of mammalian cells and SLB could efficiently deliver three different monoclonal antibodies–D6F10 (targeting abrin), anti-α-tubulin (targeting intracellular tubulin) and Herclon (against HER2 receptor) inside the cells. Such a mode of delivery was much more effective than antibodies alone treatment. These results highlight the potential of SLB as a universal nanocarrier for intracellular delivery of antibodies.

Structural and functional analysis of two universal stress proteins YdaA and YnaF from Salmonella typhimurium: possible roles in microbial stress tolerance

In many organisms "Universal Stress Proteins" (USPs) are induced in response to a variety of environmental stresses. Here we report the structures of two USPs, YnaF and YdaA from Salmonella typhimurium determined at 1.8Å and 2.4Å resolutions, respectively. YnaF consists of a single USP domain and forms a tetrameric organization stabilized by interactions mediated through chloride ions. YdaA is a larger protein consisting of two tandem USP domains. Two protomers of YdaA associate to form a structure similar to the YnaF tetramer. YdaA showed ATPase activity and an ATP binding motif G-2X-G-9X-G(S/T/N) was found in its C-terminal domain. The residues corresponding to this motif were not conserved in YnaF although YnaF could bind ATP. However, unlike YdaA, YnaF did not hydrolyse ATP in vitro. Disruption of interactions mediated through chloride ions by selected mutations converted YnaF into an ATPase. Residues that might be important for ATP hydrolysis could be identified by comparing the active sites of native and mutant structures. Only the C-terminal domain of YdaA appears to be involved in ATP hydrolysis. The structurally similar N-terminal domain was found to bind a zinc ion near the segment equivalent to the phosphate binding loop of the C-terminal domain. Mass spectrometric analysis showed that YdaA might bind a ligand of approximate molecular weight 800daltons. Structural comparisons suggest that the ligand, probably related to an intermediate in lipid A biosynthesis, might bind at a site close to the zinc ion. Therefore, the N-terminal domain of YdaA binds zinc and might play a role in lipid metabolism. Thus, USPs appear to perform several distinct functions such as ATP hydrolysis, altering membrane properties and chloride sensing.

Viruses and viral proteins

For more than 30 years X-ray crystallography has been by far the most powerful approach for determining the structures of viruses and viral proteins at atomic resolution. The information provided by these structures, which covers many important aspects of the viral life cycle such as cell-receptor recognition, viral entry, nucleic acid transfer and genome replication, has extensively enriched our vision of the virus world. Many of the structures available correspond to potential targets for antiviral drugs against important human pathogens. This article provides an overview of the current knowledge of different structural aspects of the above-mentioned processes.

Structural and kinetic studies on adenylosuccinate lyase from Mycobacterium smegmatis and Mycobacterium tuberculosis provide new insights on the catalytic residues of the enzyme

Adenylosuccinate lyase (ASL), an enzyme involved in purine biosynthesis, has been recognized as a drug target against microbial infections. In the present study, ASL from Mycobacterium smegmatis (MsASL) and Mycobacterium tuberculosis (MtbASL) were cloned, purified and crystallized. The X-ray crystal structure of MsASL was determined at a resolution of 2.16 Å. It is the first report of an apo-ASL structure with a partially ordered active site C3 loop. Diffracting crystals of MtbASL could not be obtained and a model for its structure was derived using MsASL as a template. These structures suggest that His149 and either Lys285 or Ser279 of MsASL are the residues most likely to function as the catalytic acid and base, respectively. Most of the active site residues were found to be conserved, with the exception of Ser148 and Gly319 of MsASL. Ser148 is structurally equivalent to a threonine in most other ASLs. Gly319 is replaced by an arginine residue in most ASLs. The two enzymes were catalytically much less active compared to ASLs from other organisms. Arg319Gly substitution and reduced flexibility of the C3 loop might account for the low catalytic activity of mycobacterial ASLs. The low activity is consistent with the slow growth rate of Mycobacteria and their high GC containing genomes, as well as their dependence on other salvage pathways for the supply of purine nucleotides.

STRUCTURED DIGITAL ABSTRACT

purB and purB bind by x-ray crystallography (View interaction).

Identification of key amino acid residues in the catalytic mechanism of diaminopropionate ammonialyase from Salmonella typhimurium

Diaminopropionate ammonialyase (DAPAL), a fold-type II pyridoxal 5'-phosphate-dependent enzyme, catalyzes the α,β-elimination of diaminopropionate (DAP) to pyruvate and ammonia. DAPAL was able to utilize both d- and l-DAP as substrates with almost equal efficiency. Mutational analysis of functionally important residues such as Thr385, Asp125 and Asp194 was carried out to understand the mechanism by which the isomers are hydrolyzed. Further, the putative residues involved in the formation of disulfide bond Cys271 and Cys299 were also mutated. T385S, T385D sDAPAL were as active with dl-DAP as substrate as sDAPAL, whereas the later exhibited a threefold increase in catalytic efficiency with d-Ser as substrate. Further analysis of these mutants suggested that DAPAL might follow an anti-E2 mechanism of catalysis that does not involve the formation of a quinonoid intermediate. Of the two mutants of Asp125, D125E showed complete loss of activity with d-DAP as substrate, whereas the reaction with l-DAP was not affected significantly, demonstrating that Asp125 was essential for abstraction of protons from the d-isomer. By contrast, mutational analysis of Asp194 showed that the residue may not be directly involved in proton abstraction from l-DAP. sDAPAL does not form a disulfide bond in solution, although the position of Cys299 and Cys271 in the modeled structure of sDAPAL favored the formation of a disulfide bond. Further, unlike eDAPAL, sDAPAL could be activated by monovalent cations. Mutation of the cysteine residues showed that Cys271 may be involved in coordinating the monovalent cation, as observed in the case of other fold-type II enzymes.

Dramatic structural changes resulting from the loss of a crucial hydrogen bond in the hinge region involved in C-terminal helix swapping in SurE: a survival protein from Salmonella typhimurium

Domain swapping is an interesting feature of some oligomeric proteins in which each protomer of the oligomer provides an identical surface for exclusive interaction with a segment or domain belonging to another protomer. Here we report results of mutagenesis experiments on the structure of C-terminal helix swapped dimer of a stationary phase survival protein from Salmonella typhimurium (StSurE). Wild type StSurE is a dimer in which a large helical segment at the C-terminus and a tetramerization loop comprising two β strands are swapped between the protomers. Key residues in StSurE that might promote C-terminal helix swapping were identified by sequence and structural comparisons. Three mutants in which the helix swapping is likely to be avoided were constructed and expressed in E. coli. Three-dimensional X-ray crystal structures of the mutants H234A and D230A/H234A could be determined at 2.1 Å and 2.35 Å resolutions, respectively. Contrary to expectations, helix swapping was mostly retained in both the mutants. The loss of the crucial D230 OD2– H234 NE2 hydrogen bond (2.89 Å in the wild type structure) in the hinge region was compensated by new inter and intra-chain interactions. However, the two fold molecular symmetry was lost and there were large conformational changes throughout the polypeptide. In spite of these changes, the dimeric structure and an approximate tetrameric organization were retained, probably due to the interactions involving the tetramerization loop. Mutants were mostly functionally inactive, highlighting the importance of precise inter-subunit interactions for the symmetry and function of StSurE.

Structural and mechanistic investigations on Salmonella typhimurium acetate kinase (AckA): identification of a putative ligand binding pocket at the dimeric interface

Background

Bacteria such as Escherichia coli and Salmonella typhimurium can utilize acetate as the sole source of carbon and energy. Acetate kinase (AckA) and phosphotransacetylase (Pta), key enzymes of acetate utilization pathway, regulate flux of metabolites in glycolysis, gluconeogenesis, TCA cycle, glyoxylate bypass and fatty acid metabolism.

Results

Here we report kinetic characterization of S. typhimurium AckA (StAckA) and structures of its unliganded (Form-I, 2.70 Å resolution) and citrate-bound (Form-II, 1.90 Å resolution) forms. The enzyme showed broad substrate specificity with k_cat/K_m in the order of acetate > propionate > formate. Further, the K_m for acetyl-phosphate was significantly lower than for acetate and the enzyme could catalyze the reverse reaction (i.e. ATP synthesis) more efficiently. ATP and Mg²⁺ could be substituted by other nucleoside 5′-triphosphates (GTP, UTP and CTP) and divalent cations (Mn²⁺ and Co²⁺), respectively. Form-I StAckA represents the first structural report of an unliganded AckA. StAckA protomer consists of two domains with characteristic βββαβαβα topology of ASKHA superfamily of proteins. These domains adopt an intermediate conformation compared to that of open and closed forms of ligand-bound Methanosarcina thermophila AckA (MtAckA). Spectroscopic and structural analyses of StAckA further suggested occurrence of inter-domain motion upon ligand-binding. Unexpectedly, Form-II StAckA structure showed a drastic change in the conformation of residues 230–300 compared to that of Form-I. Further investigation revealed electron density corresponding to a citrate molecule in a pocket located at the dimeric interface of Form-II StAckA. Interestingly, a similar dimeric interface pocket lined with largely conserved residues could be identified in Form-I StAckA as well as in other enzymes homologous to AckA suggesting that ligand binding at this pocket may influence the function of these enzymes.

Conclusions

The biochemical and structural characterization of StAckA reported here provides insights into the biochemical specificity, overall fold, thermal stability, molecular basis of ligand binding and inter-domain motion in AckA family of enzymes. Dramatic conformational differences observed between unliganded and citrate-bound forms of StAckA led to identification of a putative ligand-binding pocket at the dimeric interface of StAckA with implications for enzymatic function.

Crystal structure of a monomeric thiolase-like protein type 1 (TLP1) from Mycobacterium smegmatis

An analysis of the Mycobacterium smegmatis genome suggests that it codes for several thiolases and thiolase-like proteins. Thiolases are an important family of enzymes that are involved in fatty acid metabolism. They occur as either dimers or tetramers. Thiolases catalyze the Claisen condensation of two acetyl-Coenzyme A molecules in the synthetic direction and the thiolytic cleavage of 3-ketoacyl-Coenzyme A molecules in the degradative direction. Some of the M. smegmatis genes have been annotated as thiolases of the poorly characterized SCP2-thiolase subfamily. The mammalian SCP2-thiolase consists of an N-terminal thiolase domain followed by an additional C-terminal domain called sterol carrier protein-2 or SCP2. The M. smegmatis protein selected in the present study, referred to here as the thiolase-like protein type 1 (MsTLP1), has been biochemically and structurally characterized. Unlike classical thiolases, MsTLP1 is a monomer in solution. Its structure has been determined at 2.7 Å resolution by the single wavelength anomalous dispersion method. The structure of the protomer confirms that the N-terminal domain has the thiolase fold. An extra C-terminal domain is indeed observed. Interestingly, it consists of six β-strands forming an anti-parallel β-barrel which is completely different from the expected SCP2-fold. Detailed sequence and structural comparisons with thiolases show that the residues known to be essential for catalysis are not conserved in MsTLP1. Consistent with this observation, activity measurements show that MsTLP1 does not catalyze the thiolase reaction. This is the first structural report of a monomeric thiolase-like protein from any organism. These studies show that MsTLP1 belongs to a new group of thiolase related proteins of unknown function.

Crystal structure of Escherichia coli diaminopropionate ammonia-lyase reveals mechanism of enzyme activation and catalysis

Pyridoxal 5'-phosphate (PLP)-dependent enzymes utilize the unique chemistry of a pyridine ring to carry out diverse reactions involving amino acids. Diaminopropionate (DAP) ammonia-lyase (DAPAL) is a prokaryotic PLP-dependent enzyme that catalyzes the degradation of d- and l-forms of DAP to pyruvate and ammonia. Here, we report the first crystal structure of DAPAL from Escherichia coli (EcDAPAL) in tetragonal and monoclinic forms at 2.0 and 2.2 Å resolutions, respectively. Structures of EcDAPAL soaked with substrates were also determined. EcDAPAL has a typical fold type II PLP-dependent enzyme topology consisting of a large and a small domain with the active site at the interface of the two domains. The enzyme is a homodimer with a unique biological interface not observed earlier. Structure of the enzyme in the tetragonal form had PLP bound at the active site, whereas the monoclinic structure was in the apo-form. Analysis of the apo and holo structures revealed that the region around the active site undergoes transition from a disordered to ordered state and assumes a conformation suitable for catalysis only upon PLP binding. A novel disulfide was found to occur near a channel that is likely to regulate entry of ligands to the active site. EcDAPAL soaked with dl-DAP revealed density at the active site appropriate for the reaction intermediate aminoacrylate, which is consistent with the observation that EcDAPAL has low activity under crystallization conditions. Based on the analysis of the structure and results of site-directed mutagenesis, a two-base mechanism of catalysis involving Asp(120) and Lys(77) is suggested.

Structural and mutational studies on substrate specificity and catalysis of Salmonella typhimurium D-cysteine desulfhydrase

Salmonella typhimurium DCyD (StDCyD) is a fold type II pyridoxal 5′ phosphate (PLP)-dependent enzyme that catalyzes the degradation of D-Cys to H₂S and pyruvate. It also efficiently degrades β-chloro-D-alanine (βCDA). D-Ser is a poor substrate while the enzyme is inactive with respect to L-Ser and 1-amino-1-carboxy cyclopropane (ACC). Here, we report the X-ray crystal structures of StDCyD and of crystals obtained in the presence of D-Cys, βCDA, ACC, D-Ser, L-Ser, D-cycloserine (DCS) and L-cycloserine (LCS) at resolutions ranging from 1.7 to 2.6 Å. The polypeptide fold of StDCyD consisting of a small domain (residues 48–161) and a large domain (residues 1–47 and 162–328) resembles other fold type II PLP dependent enzymes. The structures obtained in the presence of D-Cys and βCDA show the product, pyruvate, bound at a site 4.0–6.0 Å away from the active site. ACC forms an external aldimine complex while D- and L-Ser bind non-covalently suggesting that the reaction with these ligands is arrested at Cα proton abstraction and transimination steps, respectively. In the active site of StDCyD cocrystallized with DCS or LCS, electron density for a pyridoxamine phosphate (PMP) was observed. Crystals soaked in cocktail containing these ligands show density for PLP-cycloserine. Spectroscopic observations also suggest formation of PMP by the hydrolysis of cycloserines. Mutational studies suggest that Ser78 and Gln77 are key determinants of enzyme specificity and the phenolate of Tyr287 is responsible for Cα proton abstraction from D-Cys. Based on these studies, a probable mechanism for the degradation of D-Cys by StDCyD is proposed.

Preliminary X-ray crystallographic studies on acetate kinase (AckA) from Salmonella typhimurium in two crystal forms

Acetate kinase (AckA) catalyzes the reversible transfer of a phosphate group from acetyl phosphate to ADP, generating acetate and ATP, and plays a central role in carbon metabolism. In the present work, the gene corresponding to AckA from Salmonella typhimurium (StAckA) was cloned in the IPTG-inducible pRSET C vector, resulting in the attachment of a hexahistidine tag to the N-terminus of the expressed enzyme. The recombinant protein was overexpressed, purified and crystallized in two different crystal forms using the microbatch-under-oil method. Form I crystals diffracted to 2.70 Å resolution when examined using X-rays from a rotating-anode X-ray generator and belonged to the monoclinic space group C2, with unit-cell parameters a = 283.16, b = 62.17, c = 91.69 Å, β = 93.57°. Form II crystals, which diffracted to a higher resolution of 2.35 Å on the rotating-anode X-ray generator and to 1.90 Å on beamline BM14 of the ESRF, Grenoble, also belonged to space group C2 but with smaller unit-cell parameters (a = 151.01, b = 78.50, c = 97.48 Å, β = 116.37°). Calculation of Matthews coefficients for the two crystal forms suggested the presence of four and two protomers of StAckA in the asymmetric units of forms I and II, respectively. Initial phases for the form I diffraction data were obtained by molecular replacement using the coordinates of Thermotoga maritima AckA (TmAckA) as the search model. The form II structure was phased using a monomer of form I as the phasing model. Inspection of the initial electron-density maps suggests dramatic conformational differences between residues 230 and 300 of the two crystal forms and warrants further investigation.

Cloning, expression, purification and preliminary X-ray diffraction studies of a putative Mycobacterium smegmatis thiolase

Thiolases are important in fatty-acid degradation and biosynthetic pathways. Analysis of the genomic sequence of Mycobacterium smegmatis suggests the presence of several putative thiolase genes. One of these genes appears to code for an SCP-x protein. Human SCP-x consists of an N-terminal domain (referred to as SCP2 thiolase) and a C-terminal domain (referred as sterol carrier protein 2). Here, the cloning, expression, purification and crystallization of this putative SCP-x protein from M. smegmatis are reported. The crystals diffracted X-rays to 2.5 Å resolution and belonged to the triclinic space group P1. Calculation of rotation functions using X-ray diffraction data suggests that the protein is likely to possess a hexameric oligomerization with 32 symmetry which has not been observed in the other six known classes of this enzyme.

Probing the role of the fully conserved Cys126 in triosephosphate isomerase by site-specific mutagenesis--distal effects on dimer stability

Cys126 is a completely conserved residue in triosephosphate isomerase that is proximal to the active site but has been ascribed no specific role in catalysis. A previous study of the C126S and C126A mutants of yeast TIM reported substantial catalytic activity for the mutant enzymes, leading to the suggestion that this residue is implicated in folding and stability [Gonzalez-Mondragon E et al. (2004) Biochemistry 43, 3255-3263]. We re-examined the role of Cys126 with the Plasmodium falciparum enzyme as a model. Five mutants, C126S, C126A, C126V, C126M, and C126T, were characterized. Crystal structures of the 3-phosphoglycolate-bound C126S mutant and the unliganded forms of the C126S and C126A mutants were determined at a resolution of 1.7-2.1 Å. Kinetic studies revealed an approximately five-fold drop in k(cat) for the C126S and C126A mutants, whereas an approximately 10-fold drop was observed for the other three mutants. At ambient temperature, the wild-type enzyme and all five mutants showed no concentration dependence of activity. At higher temperatures (> 40 °C), the mutants showed a significant concentration dependence, with a dramatic loss in activity below 15 μM. The mutants also had diminished thermal stability at low concentration, as monitored by far-UV CD. These results suggest that Cys126 contributes to the stability of the dimer interface through a network of interactions involving His95, Glu97, and Arg98, which form direct contacts across the dimer interface.

Crystal structure of Salmonella typhimurium 2-methylcitrate synthase: Insights on domain movement and substrate specificity

2-Methylcitric acid (2-MCA) cycle is one of the well studied pathways for the utilization of propionate as a source of carbon and energy in bacteria such as Salmonella typhimurium and Escherichia coli. 2-Methylcitrate synthase (2-MCS) catalyzes the conversion of oxaloacetate and propionyl-CoA to 2-methylcitrate and CoA in the second step of 2-MCA cycle. Here, we report the X-ray crystal structure of S. typhimurium 2-MCS (StPrpC) at 2.4Å resolution and its functional characterization. StPrpC was found to utilize propionyl-CoA more efficiently than acetyl-CoA or butyryl-CoA. The polypeptide fold and the catalytic residues of StPrpC are conserved in citrate synthases (CSs) suggesting similarities in their functional mechanisms. In the triclinic P1 cell, StPrpC molecules were organized as decamers composed of five identical dimer units. In solution, StPrpC was in a dimeric form at low concentrations and was converted to larger oligomers at higher concentrations. CSs are usually dimeric proteins. In Gram-negative bacteria, a hexameric form, believed to be important for regulation of activity by NADH, is also observed. Structural comparisons with hexameric E. coli CS suggested that the key residues involved in NADH binding are not conserved in StPrpC. Structural comparison with the ligand free and bound states of CSs showed that StPrpC is in a nearly closed conformation despite the absence of bound ligands. It was found that the Tyr197 and Leu324 of StPrpC are structurally equivalent to the ligand binding residues His and Val, respectively, of CSs. These substitutions might determine the specificities for acyl-CoAs of these enzymes.

Structural and functional studies on a mesophilic stationary phase survival protein (Sur E) from Salmonella typhimurium

SurE, the stationary-phase survival protein of Salmonella typhimurium, forms part of a stress survival operon regulated by the stationary-phase RNA polymerase alternative sigma factor. SurE is known to improve bacterial viability during stress conditions. It functions as a phosphatase specific to nucleoside monophosphates. In the present study we reported the X-ray crystal structure of SurE from Salmonella typhimurium. The protein crystallized in two forms: orthorhombic F222; and monoclinic C2. The two structures were determined to resolutions of 1.7 and 2.7 A, respectively. The protein exists as a domain-swapped dimer. The residue D230 is involved in several interactions that are probably crucial for domain swapping. A divalent metal ion is found at the active site of the enzyme, which is consistent with the divalent metal ion-dependent activity of the enzyme. Interactions of the conserved DD motif present at the N-terminus with the phosphate and the Mg(2+) present in the active site suggest that these residues play an important role in enzyme activity. The divalent metal ion specificity and the kinetic constants of SurE were determined using the generic phosphatase substrate para-nitrophenyl phosphate. The enzyme was inactive in the absence of divalent cations and was most active in the presence of Mg(2+). Thermal denaturation studies showed that S. typhimurium SurE is much less stable than its homologues and an attempt was made to understand the molecular basis of the lower thermal stability based on solvation free-energy. This is the first detailed crystal structure analysis of SurE from a mesophilic organism.

Systematic study on crystal-contact engineering of diphthine synthase: influence of mutations at crystal-packing regions on X-ray diffraction quality

It is well known that protein crystallizability can be influenced by site-directed mutagenesis of residues on the molecular surface of proteins, indicating that the intermolecular interactions in crystal-packing regions may play a crucial role in the structural regularity at atomic resolution of protein crystals. Here, a systematic examination was made of the improvement in the diffraction resolution of protein crystals on introducing a single mutation of a crystal-packing residue in order to provide more favourable packing interactions, using diphthine synthase from Pyrococcus horikoshii OT3 as a model system. All of a total of 21 designed mutants at 13 different crystal-packing residues yielded almost isomorphous crystals from the same crystallization conditions as those used for the wild-type crystals, which diffracted X-rays to 2.1 A resolution. Of the 21 mutants, eight provided crystals with an improved resolution of 1.8 A or better. Thus, it has been clarified that crystal quality can be improved by introducing a suitable single mutation of a crystal-packing residue. In the improved crystals, more intimate crystal-packing interactions than those in the wild-type crystal are observed. Notably, the mutants K49R and T146R yielded crystals with outstandingly improved resolutions of 1.5 and 1.6 A, respectively, in which a large-scale rearrangement of packing interactions was unexpectedly observed despite the retention of the same isomorphous crystal form. In contrast, the mutants that provided results that were in good agreement with the designed putative structures tended to achieve only moderate improvements in resolution of up to 1.75 A. These results suggest a difficulty in the rational prediction of highly effective mutations in crystal engineering.

Crystal structures of Salmonella typhimurium propionate kinase and its complex with Ap4A: evidence for a novel Ap4A synthetic activity

Propionate kinase catalyses the last step in the anaerobic breakdown of L-threonine to propionate in which propionyl phosphate and ADP are converted to propionate and ATP. Here we report the structures of propionate kinase (TdcD) in the native form as well as in complex with diadenosine 5',5'''-P1,P4-tetraphosphate (Ap4A) by X-ray crystallography. Structure of TdcD obtained after cocrystallization with ATP showed Ap4A bound to the active site pocket suggesting the presence of Ap4A synthetic activity in TdcD. Binding of Ap4A to the enzyme was confirmed by the structure determination of a TdcD-Ap4A complex obtained after cocrystallization of TdcD with commercially available Ap4A. Mass spectroscopic studies provided further evidence for the formation of Ap4A by propionate kinase in the presence of ATP. In the TdcD-Ap4A complex structure, Ap4A is present in an extended conformation with one adenosine moiety present in the nucleotide binding site and other in the proposed propionate binding site. These observations tend to support direct in-line transfer of phosphoryl group during the kinase reaction.

Structure of recombinant capsids formed by the beta-annulus deletion mutant -- rCP (Delta48-59) of Sesbania mosaic virus

A unique feature of several T=3 icosahedral viruses is the presence of a structure called the beta-annulus formed by extensive hydrogen bonding between protein subunits related by icosahedral three-fold axis of symmetry. This unique structure has been suggested as a molecular switch that determines the T=3 capsid assembly. In order to examine the importance of the beta-annulus, a deletion mutant of Sesbania mosaic virus coat protein in which residues 48-59 involved in the formation of the beta-annulus were deleted retaining the rest of the residues in the amino terminal segment (rCP (Delta48-59)) was constructed. When expressed in Escherichia coli, the mutant protein assembled into virus like particles of sizes close to that of the wild type virus particles. The purified capsids were crystallized and their three dimensional structure was determined at 3.6 A resolution by X-ray crystallography. The mutant capsid structure closely resembled that of the native virus particles. However, surprisingly, the structure revealed that the assembly of the particles has proceeded without the formation of the beta-annulus. Therefore, the beta-annulus is not essential for T=3 capsid assembly as speculated earlier and may be formed as a consequence of the particle assembly. This is the first structural demonstration that the virus particle morphology with and without the beta-annulus could be closely similar.

Cloning, expression, purification, crystallization and preliminary X-ray crystallographic analysis of the mannose 6-phosphate isomerase from Salmonella typhimurium

Mannose 6-phosphate isomerase (MPI; EC 5.3.1.8) catalyzes the reversible isomerization of D-mannose 6-phosphate (M6P) and D-fructose 6-phosphate (F6P). In the eukaryotes and prokaryotes investigated to date, the enzyme has been reported to play a crucial role in D-mannose metabolism and supply of the activated mannose donor guanosine diphosphate D-mannose (GDP-D-mannose). In the present study, MPI was cloned from Salmonella typhimurium, overexpressed in Escherichia coli and purified using Ni-NTA affinity column chromatography. Purified MPI crystallized in space group P2(1)2(1)2(1), with unit-cell parameters a = 36.03, b = 92.2, c = 111.01 A. A data set extending to 1.66 A resolution was collected with 98.8% completeness using an image-plate detector system mounted on a rotating-anode X-ray generator. The asymmetric unit of the crystal cell was compatible with the presence of a monomer of MPI. A preliminary structure solution of the enzyme has been obtained by molecular replacement using Candida albicans MPI as the phasing model and the program Phaser. Further refinement and model building are in progress.

Structural biology of plasmodial proteins

Malaria is a global disease infecting several million individuals annually. Malarial infection is particularly severe in the poorest parts of the world and is a major drain on their limited resources. Development of drug resistance and absence of a preventive vaccine have led to an immediate necessity for identifying new drug targets to combat malaria. Understanding the intricacies of parasite biology is essential to design novel intervention strategies that can prevent the growth of the parasite. The structural biology approach towards this goal involves the identification of key differences in the structures of the human and parasite enzymes and the determination of unique protein structures essential for parasite survival. This review covers the work on structural biology of plasmodial proteins carried out during the period of January 2006 to June 2007.

Cloning, expression, purification, crystallization and preliminary X-ray diffraction analysis of universal stress protein F (YnaF) from Salmonella typhimurium

The universal stress protein UspF (YnaF) is a small cytoplasmic bacterial protein. The expression of stress proteins is enhanced when cells are exposed to heat shock, nutrition starvation and certain other stress-inducing agents. YnaF promotes cell survival during prolonged exposure to stress and may activate a general mechanism for stress endurance. This manuscript reports preliminary crystallographic studies on YnaF from Salmonella typhimurium. The gene coding for YnaF was cloned and overexpressed and the protein was purified by Ni-NTA affinity chromatography. Purified YnaF was crystallized using vapour-diffusion and microbatch methods. The crystals belong to space group P2(1), with unit-cell parameters a = 37.51, b = 77.18, c = 56.34 A, beta = 101.8 degrees . A data set was collected to 2.5 A resolution with 94.6% completeness using an image-plate detector system mounted on a rotating-anode X-ray generator. Attempts to determine the structure are in progress.

Structure of biosynthetic N-acetylornithine aminotransferase from Salmonella typhimurium: Studies on substrate specificity and inhibitor binding

Acetylornithine aminotransferase (AcOAT) is one of the key enzymes involved in arginine metabolism and catalyzes the conversion of N-acetylglutamate semialdehyde to N-acetylornithine (AcOrn) in the presence of L-glutamate. It belongs to the Type I subgroup II family of pyridoxal 5'-phosphate (PLP) dependent enzymes. E. coli biosynthetic AcOAT (eAcOAT) also catalyzes the conversion of N-succinyl-L-2-amino-6-oxopimelate to N-succinyl-L,L-diaminopimelate, one of the steps in lysine biosynthesis. In view of the critical role of AcOAT in lysine and arginine biosynthesis, structural studies were initiated on the enzyme from S. typhimurium (sAcOAT). The K(m) and k(cat)/K(m) values determined with the purified sAcOAT suggested that the enzyme had much higher affinity for AcOrn than for ornithine (Orn) and was more efficient than eAcOAT. sAcOAT was inhibited by gabaculine (Gcn) with an inhibition constant (K(i)) of 7 microM and a second-order rate constant (k(2)) of 0.16 mM(-1) s(-1). sAcOAT, crystallized in the unliganded form and in the presence of Gcn or L-glutamate, diffracted to a maximum resolution of 1.90 A and contained a dimer in the asymmetric unit. The structure of unliganded sAcOAT showed significant electron density for PLP in only one of the subunits (subunit A). The asymmetry in PLP binding could be attributed to the ordering of the loop L(alphak-) (betam) in only one subunit (subunit B; the loop from subunit B comes close to the phosphate group of PLP in subunit A). Structural and spectral studies of sAcOAT with Gcn suggested that the enzyme might have a low affinity for PLP-Gcn complex. Comparison of sAcOAT with T. thermophilus AcOAT and human ornithine aminotransferase suggested that the higher specificity of sAcOAT towards AcOrn may not be due to specific changes in the active site residues but could result from minor conformational changes in some of them. This is the first structural report of AcOAT from a mesophilic organism and could serve as a basis for drug design as the enzyme is important for bacterial cell wall biosynthesis.

Structure determination and biochemical studies on Bacillus stearothermophilus E53Q serine hydroxymethyltransferase and its complexes provide insights on function and enzyme memory

Serine hydroxymethyltransferase (SHMT) belongs to the alpha-family of pyridoxal 5'-phosphate-dependent enzymes and catalyzes the reversible conversion of L-Ser and tetrahydrofolate to Gly and 5,10-methylene tetrahydrofolate. 5,10-Methylene tetrahydrofolate serves as a source of one-carbon fragment in many biological processes. SHMT also catalyzes the tetrahydrofolate-independent conversion of L-allo-Thr to Gly and acetaldehyde. The crystal structure of Bacillus stearothermophilus SHMT (bsSHMT) suggested that E53 interacts with the substrate, L-Ser and tetrahydrofolate. To elucidate the role of E53, it was mutated to Q and structural and biochemical studies were carried out with the mutant enzyme. The internal aldimine structure of E53QbsSHMT was similar to that of the wild-type enzyme, except for significant changes at Q53, Y60 and Y61. The carboxyl of Gly and side chain of L-Ser were in two conformations in the respective external aldimine structures. The mutant enzyme was completely inactive for tetrahydrofolate-dependent cleavage of L-Ser, whereas there was a 1.5-fold increase in the rate of tetrahydrofolate-independent reaction with L-allo-Thr. The results obtained from these studies suggest that E53 plays an essential role in tetrahydrofolate/5-formyl tetrahydrofolate binding and in the proper positioning of Cbeta of L-Ser for direct attack by N5 of tetrahydrofolate. Most interestingly, the structure of the complex obtained by cocrystallization of E53QbsSHMT with Gly and 5-formyl tetrahydrofolate revealed the gem-diamine form of pyridoxal 5'-phosphate bound to Gly and active site Lys. However, density for 5-formyl tetrahydrofolate was not observed. Gly carboxylate was in a single conformation, whereas pyridoxal 5'-phosphate had two distinct conformations. The differences between the structures of this complex and Gly external aldimine suggest that the changes induced by initial binding of 5-formyl tetrahydrofolate are retained even though 5-formyl tetrahydrofolate is absent in the final structure. Spectral studies carried out with this mutant enzyme also suggest that 5-formyl tetrahydrofolate binds to the E53QbsSHMT-Gly complex forming a quinonoid intermediate and falls off within 4 h of dialysis, leaving behind the mutant enzyme in the gem-diamine form. This is the first report to provide direct evidence for enzyme memory based on the crystal structure of enzyme complexes.

Structure of the putative mutarotase YeaD from Salmonella typhimurium: structural comparison with galactose mutarotases

Salmonella typhimurium YeaD (stYeaD), annotated as a putative aldose 1-epimerase, has a very low sequence identity to other well characterized mutarotases. Sequence analysis suggested that the catalytic residues and a few of the substrate-binding residues of galactose mutarotases (GalMs) are conserved in stYeaD. Determination of the crystal structure of stYeaD in an orthorhombic form at 1.9 A resolution and in a monoclinic form at 2.5 A resolution revealed this protein to adopt the beta-sandwich fold similar to GalMs. Structural comparison of stYeaD with GalMs has permitted the identification of residues involved in catalysis and substrate binding. In spite of the similar fold and conservation of catalytic residues, minor but significant differences were observed in the substrate-binding pocket. These analyses pointed out the possible role of Arg74 and Arg99, found only in YeaD-like proteins, in ligand anchoring and suggested that the specificity of stYeaD may be distinct from those of GalMs.

Structure of triosephosphate isomerase (TIM) fromMethanocaldococcus jannaschii

The crystal structure of a recombinant triosephosphate isomerase (TIM) from the archaeabacterium Methanocaldococcus jannaschii has been determined at a resolution of 2.3 A using X-ray diffraction data from a tetartohedrally twinned crystal. M. jannaschii TIM (MjTIM) is tetrameric, as suggested by solution studies and from the crystal structure, as is the case for two other structurally characterized archaeal TIMs. The archaeabacterial TIMs are shorter compared with the dimeric TIMs; the insertions in the dimeric TIMs occur in the vicinity of the tetramer interface, resulting in a hindrance to tetramerization in the dimeric TIMs. The charge distribution on the surface of the archaeal TIMs also facilitates tetramerization. Analysis of the barrel interactions in TIMs suggests that these interactions are unlikely to account for the thermal stability of the archaeal TIMs. A novelty of the unliganded structure of MjTIM is the complete absence of electron density for the loop 6 residues. The disorder of this loop could be ascribed to a missing salt bridge between residues at the N- and C-terminal ends of the loop in MjTIM.

Crystal structures of Salmonella typhimurium biodegradative threonine deaminase and its complex with CMP provide structural insights into ligand-induced oligomerization and enzyme activation

Two different pyridoxal 5'-phosphate-containing l-threonine deaminases (EC 4.3.1.19), biosynthetic and biodegradative, which catalyze the deamination of l-threonine to alpha-ketobutyrate, are present in Escherichia coli and Salmonella typhimurium. Biodegradative threonine deaminase (TdcB) catalyzes the first reaction in the anaerobic breakdown of l-threonine to propionate. TdcB, unlike the biosynthetic threonine deaminase, is insensitive to l-isoleucine and is activated by AMP. In the present study, TdcB from S. typhimurium was cloned and overexpressed in E. coli. In the presence of AMP or CMP, the recombinant enzyme was converted to the tetrameric form accompanied by significant enzyme activation. To provide insights into ligand-mediated oligomerization and enzyme activation, crystal structures of S. typhimurium TdcB and its complex with CMP were determined. In the native structure, TdcB is in a dimeric form, whereas in the TdcB.CMP complex, it exists in a tetrameric form with 222 symmetry and appears as a dimer of dimers. Tetrameric TdcB binds to four molecules of CMP, two at each of the dimer interfaces. Comparison of the dimer structure in the ligand (CMP)-free and -bound forms suggests that the changes induced by ligand binding at the dimer interface are essential for tetramerization. The differences observed in the tertiary and quaternary structures of TdcB in the absence and presence of CMP appear to account for enzyme activation and increased binding affinity for l-threonine. Comparison of TdcB with related pyridoxal 5'-phosphate-dependent enzymes points to structural and mechanistic similarities.

The role of inter-subunit ionic interactions in the assembly of Physalis mottle tymovirus

Physalis mottle tymovirus (PhMV) is a small spherical plant virus with its RNA genome encapsidated in a protein shell made of 180 identical coat protein (CP) subunits. The amino acid residues involved in two interfacial salt bridges, Asp-83/Arg-159 and Arg-68/Asp-150 and Lys-153, were targeted for mutagenesis with a view to delineate the role of interfacial ionic interactions in the subunit folding and assembly of the virus. R159A and D83A-R159A recombinant CP (rCP) mutants formed stable T = 3 capsids, indicating that the D83-R159 interfacial salt bridge is dispensable for the folding and assembly of PhMV. However, D150A and R68Q-D150A mutant rCPs were present in the insoluble fraction, suggesting that the R68-D150 interfacial salt bridge is crucial for subunit folding and assembly. Similarly, K153Q, D83A-K153Q, and H69A-K153Q mutant rCPs were present in the insoluble fraction. Interestingly, the R68Q-D150A, D83A-K153Q, and H69A-K153Q double mutant rCPs could be refolded into partially folded soluble heterogeneous aggregates of 14-16 S. The results further confirm our earlier observation that subunit folding and assembly are concerted events in PhMV.

Crystal structures of ADP and AMPPNP-bound propionate kinase (TdcD) from Salmonella typhimurium: comparison with members of acetate and sugar kinase/heat shock cognate 70/actin superfamily

Recently, it has been shown that l-threonine can be catabolized non-oxidatively to propionate via 2-ketobutyrate. Propionate kinase (TdcD; EC 2.7.2.-) catalyses the last step of this metabolic process by enabling the conversion of propionyl phosphate and ADP to propionate and ATP. To provide insights into the substrate-binding pocket and catalytic mechanism of TdcD, the crystal structures of the enzyme from Salmonella typhimurium in complex with ADP and AMPPNP have been determined to resolutions of 2.2A and 2.3A, respectively, by molecular replacement using Methanosarcina thermophila acetate kinase (MAK; EC 2.7.2.1). Propionate kinase, like acetate kinase, contains a fold with the topology betabetabetaalphabetaalphabetaalpha, identical with that of glycerol kinase, hexokinase, heat shock cognaten 70 (Hsc70) and actin, the superfamily of phosphotransferases. The structure consists of two domains with the active site contained in a cleft at the domain interface. Examination of the active site pocket revealed a plausible structural rationale for the greater specificity of the enzyme towards propionate than acetate. This was further confirmed by kinetic studies with the purified enzyme, which showed about ten times lower K(m) for propionate (2.3 mM) than for acetate (26.9 mM). Comparison of TdcD complex structures with those of acetate and sugar kinase/Hsc70/actin obtained with different ligands has permitted the identification of catalytically essential residues involved in substrate binding and catalysis, and points to both structural and mechanistic similarities. In the well-characterized members of this superfamily, ATP phosphoryl transfer or hydrolysis is coupled to a large conformational change in which the two domains close around the active site cleft. The significant amino acid sequence similarity between TdcD and MAK has facilitated study of domain movement, which indicates that the conformation assumed by the two domains in the nucleotide-bound structure of TdcD may represent an intermediate point in the pathway of domain closure.

The Role of Arginine-rich Motif and β-Annulus in the Assembly and Stability of Sesbania Mosaic Virus Capsids

Sesbania mosaic virus (SeMV) capsids are stabilized by protein-protein, protein-RNA and calcium-mediated protein-protein interactions. The N-terminal random domain of SeMV coat protein (CP) controls RNA encapsidation and size of the capsids and has two important motifs, the arginine-rich motif (ARM) and the beta-annulus structure. Here, mutational analysis of the arginine residues present in the ARM to glutamic acid was carried out. Mutation of all the arginine residues in the ARM almost completely abolished RNA encapsidation, although the assembly of T=3 capsids was not affected. A minimum of three arginine residues was found to be essential for RNA encapsidation. The mutant capsids devoid of RNA were less stable to thermal denaturation when compared to wild-type capsids. The results suggest that capsid assembly is entirely mediated by CP-dependent protein-protein inter-subunit interactions and encapsidation of genomic RNA enhances the stability of the capsids. Because of the unique structural ordering of beta-annulus segment at the icosahedral 3-folds, it has been suggested as the switch that determines the pentameric and hexameric clustering of CP subunits essential for T=3 capsid assembly. Surprisingly, mutation of a conserved proline within the segment that forms the beta-annulus to alanine, or deletion of residues 48-53 involved in hydrogen bonding interactions with residues 54-58 of the 3-fold related subunit or deletion of all the residues (48-59) involved in the formation of beta-annulus did not affect capsid assembly. These results suggest that the switch for assembly into T=3 capsids is not the beta-annulus. The ordered beta-annulus observed in the structures of many viruses could be a consequence of assembly to optimize intersubunit interactions.

Structural studies on recombinant T = 3 capsids of Sesbania mosaic virus coat protein mutants

When expressed in Escherichia coli, the recombinant coat protein (rCP) of Sesbania mosaic virus (SeMV) was shown to self-assemble into T = 3 capsids encapsidating CP mRNA and 23S rRNA derived from the host. Expression of CP-P53A, in which a conserved proline at position 53 in the beta-annulus was substituted by alanine (CP-P53A), also produced similar capsids. Purified rCP and CP-P53A particles were crystallized and X-ray crystal structures of their mutant capsids were determined to resolutions of 3.6 and 4.1 A, respectively. As in the native viral CP, the CPs in these recombinant capsids adopt the jelly-roll beta-sandwich fold. The amino-terminal residues of the C subunits alone are ordered and form the beta-annulus structure at the quasi-sixfold axes. A characteristic bend in the beta-annulus remains unaffected in CP-P53A. The quasi-threefold interfaces of the capsids harbour calcium ions coordinated by ligands from the adjacent threefold-related subunits in a geometry that is analogous to that observed in the native capsid. Taken together with studies on deletion and substitution mutants of SeMV CP, these results suggest the possibility that the beta-annulus and nucleic acid-mediated interactions may be less important for the assembly of sobemoviruses than previously envisaged.

Structure of a mutantT= 1 capsid of Sesbania mosaic virus: role of water molecules in capsid architecture and integrity

Deletion of the N-terminal 31 amino acids from the coat protein (CP) of Sesbania mosaic virus (SeMV) results in the formation of T = 1 capsids. The X-ray crystal structure of CP-NDelta31 mutant capsids reveals that the CP adopts a conformation similar to those of other T = 1 mutants. The 40 N-terminal residues are disordered in CP-NDelta31. The intersubunit hydrogen bonds closely resemble those of the native capsid. The role of water molecules in the SeMV structure has been analyzed for the first time using the present structure. As many as 139 of the 173 waters per subunit make direct contacts with the protein atoms. The water molecules form a robust scaffold around the capsid, stabilize the loops and provide integrity to the subunit. These waters constitute a network connecting diametrically opposite ends of the subunit. Such waters might act as nodes for conveying signals for assembly or disassembly across a large conformational space. Many water-mediated interactions are observed at various interfaces. The twofold interface, which has the smallest number of protein-protein contacts, is primarily held by water-mediated interactions. The present structure illuminates the role of water molecules in the structure and stability of the capsid and points out their possible significance in assembly.

Structures of unliganded and inhibitor complexes of W168F, a Loop6 hinge mutant of Plasmodium falciparum triosephosphate isomerase: observation of an intermediate position of loop6

The enzymatic reaction of triosephosphate isomerase (TIM) is controlled by the movement of a loop (loop6, residues 166-176). Crystal structures of TIMs from a variety of sources have revealed that the loop6, which is in an open conformation in the unliganded enzyme, adopts a closed conformation in inhibitor complexes. In contrast, structures with loop open conformation are obtained in most of the complexes of TIM from the malarial parasite Plasmodium falciparum (PfTIM). W168 is a conserved N-terminal hinge residue, involved in different sets of interactions in the "open" and "closed" forms of loop6. The role of W168 in determining the loop conformation was examined by structural studies on the mutant W168F and its complexes with ligands. The three-dimensional structures of unliganded mutant (1.8 A) and complexes with sulfate (2.8 A) and glycerol-2-phosphate (G2P) (2.8 A) have been determined. Loop6 was found disordered in these structures, reflecting the importance of W168 in stabilizing either the open or the closed states. Critical sequence differences between the Plasmodium enzyme and other TIMs may influence the equilibrium between the closed and open forms. Examination of the environment of the loop6 shows that its propensity for the open or the closed forms is influenced not only by Phe96 as suggested earlier, but also by Asn233, which occurs in the vicinity of the active site. This residue is Gly in the other TIM sequences and probably plays a crucial role in the mode of ligand binding, which in turn affects the loop opening/closing process in PfTIM.

Role of metal ion-mediated interactions in the assembly and stability of Sesbania mosaic virus T=3 and T=1 capsids

Sesbania mosaic virus (SeMV) capsids are stabilized by RNA-protein, protein-protein and calcium-mediated protein-protein interactions. The removal of calcium has been proposed to be a prerequisite for the disassembly of the virus. The crystal structure of native T=3 SeMV capsid revealed that residues D146 and D149 from one subunit and Y205, N267 and N268 of the neighboring subunit form the calcium-binding site (CBS). The CBS environment is found to be identical even in the recombinant CP-NDelta65 T=1 capsids. Here, we have addressed the role of calcium and the residues involved in calcium co-ordination in the assembly and stability of T=3 and T=1 capsids by mutational analysis. Deletion of N267 and N268 did not affect T=3 or T=1 assembly, although the capsids were devoid of calcium, suggesting that assembly does not require calcium ions. However, the stability of the capsids was reduced drastically. Site-directed mutagenesis revealed that either a single mutation (D149N) or a double mutation (D146N-D149N) of SeMV coat protein affected drastically both the assembly and stability of T=3 capsids. On the other hand, the D146N-D149N mutation in CP-NDelta65 did not affect the assembly of T=1 capsid, although their stability was reduced considerably. Since the major difference between the T=3 and T=1 capsids is the absence of the N-terminal arginine-rich motif (N-ARM) and the beta-annulus from the subunits forming the T=1 capsids, it is possible that D149 initiates the N-ARM-RNA interactions that lead to the formation of the beta-annulus, which is essential for T=3 capsid assembly.

T=1 capsid structures of Sesbania mosaic virus coat protein mutants: determinants of T=3 and T=1 capsid assembly

Sesbania mosaic virus particles consist of 180 coat protein subunits of 29kDa organized on a T=3 icosahedral lattice. N-terminal deletion mutants of coat protein that lack 36 (CP-NDelta36) and 65 (CP-NDelta65) residues from the N terminus, when expressed in Escherichia coli, produced similar T=1 capsids of approximate diameter 20nm. In contrast to the wild-type particles, these contain only 60 copies of the truncated protein subunits (T=1). CP-NDelta65 lacks the "beta-annulus" believed to be responsible for the error-free assembly of T=3 particles. Though the CP-NDelta36 mutant has the beta-annulus segment, it does not form a T=3 capsid, presumably because it lacks an arginine-rich motif found close to the amino terminus. Both CP-NDelta36 and CP-NDelta65 T=1 capsids retain many key features of the T=3 quaternary structure. Calcium binding geometries at the coat protein interfaces in these two particles are also nearly identical. When the conserved aspartate residues that coordinate the calcium, D146 and D149 in the CP-NDelta65, were mutated to asparagine (CP-NDelta65-D146N-D149N), the subunits assembled into T=1 particles but failed to bind calcium ions. The structure of this mutant revealed particles that were slightly expanded. The analysis of the structures of these mutant capsids suggests that although calcium binding contributes substantially to the stability of T=1 particles, it is not mandatory for their assembly. In contrast, the presence of a large fraction of the amino-terminal arm including sequences that precede the beta-annulus and the conserved D149 appear to be indispensable for the error-free assembly of T=3 particles.

Crystal structure of fully ligated adenylosuccinate synthetase from Plasmodium falciparum

In the absence of the de novo purine nucleotide biosynthetic pathway in parasitic protozoa, purine salvage is of primary importance for parasite survival. Enzymes of the salvage pathway are, therefore, good targets for anti-parasitic drugs. Adenylosuccinate synthetase (AdSS), catalysing the first committed step in the synthesis of AMP from IMP, is a potential target for anti-protozoal chemotherapy. We report here the crystal structure of adenylosuccinate synthetase from the malaria parasite, Plasmodium falciparum, complexed to 6-phosphoryl IMP, GDP, Mg2+ and the aspartate analogue, hadacidin at 2 A resolution. The overall architecture of P. falciparum AdSS (PfAdSS) is similar to the known structures from Escherichia coli, mouse and plants. Differences in substrate interactions seen in this structure provide a plausible explanation for the kinetic differences between PfAdSS and the enzyme from other species. Additional hydrogen bonding interactions of the protein with GDP may account for the ordered binding of substrates to the enzyme. The dimer interface of PfAdSS is also different, with a pronounced excess of positively charged residues. Differences highlighted here provide a basis for the design of species-specific inhibitors of the enzyme.

Crystal structure of Salmonella typhimurium 2-methylisocitrate lyase (PrpB) and its complex with pyruvate and Mg2+

Propionate metabolism in Salmonella typhimurium occurs via 2-methylcitric acid cycle. The last step of this cycle, the cleavage of 2-methylisocitrate to succinate and pyruvate, is catalysed by 2-methylisocitrate lyase (PrpB). Here we report the X-ray crystal structure of the native and the pyruvate/Mg(2+) bound PrpB from S. typhimurium, determined at 2.1 and 2.3A, respectively. The structure closely resembles that of the Escherichia coli enzyme. Unlike the E. coli PrpB, Mg(2+) could not be located in the native Salmonella PrpB. Only in pyruvate bound PrpB structure, Mg(2+) was found coordinated with pyruvate. Binding of pyruvate to PrpB seems to induce movement of the Mg(2+) by 2.5A from its position found in E. coli native PrpB. In both the native enzyme and pyruvate/Mg(2+) bound forms, the active site loop is completely disordered. Examination of the pocket in which pyruvate and glyoxalate bind to 2-methylisocitrate lyase and isocitrate lyase, respectively, reveals plausible rationale for different substrate specificities of these two enzymes. Structural similarities in substrate and metal atom binding site as well as presence of similar residues in the active site suggest possible similarities in the reaction mechanism.

Structure of Plasmodium falciparum triose-phosphate isomerase-2-phosphoglycerate complex at 1.1-A resolution

Triose-phosphate isomerase, a key enzyme of the glycolytic pathway, catalyzes the isomerization of dihydroxy acetone phosphate and glyceraldehyde 3-phosphate. In this communication we report the crystal structure of Plasmodium falciparum triose-phosphate isomerase complexed to the inhibitor 2-phosphoglycerate at 1.1-A resolution. The crystallographic asymmetric unit contains a dimeric molecule. The inhibitor bound to one of the subunits in which the flexible catalytic loop 6 is in the open conformation has been cleaved into two fragments presumably due to radiation damage. The cleavage products have been tentatively identified as 2-oxoglycerate and meta-phosphate. The intact 2-phosphoglycerate bound to the active site of the other subunit has been observed in two different orientations. The active site loop in this subunit is in both open and "closed" conformations, although the open form is predominant. Concomitant with the loop closure, Phe-96, Leu-167, and residues 208-211 (YGGS) are also observed in dual conformations in the B-subunit. Detailed comparison of the active-site geometry in the present case to the Saccharomyces cerevisiae triose-phosphate isomerase-dihydroxy acetone phosphate and Leishmania mexicana triose-phosphate isomerase-phosphoglycolate complexes, which have also been determined at atomic resolution, shows that certain interactions are common to the three structures, although 2-phosphoglycerate is neither a substrate nor a transition state analogue.

Crystallization and preliminary X-ray diffraction studies on recombinant diaminopropionate ammonia lyase from Escherichia coli

Diaminopropionate (DAP) ammonia lyase (a PLP-dependent enzyme; EC 4.3.1.15) catalyzes the alpha,beta-elimination reaction of both L- and D-alpha,beta-diaminopropionate to form pyruvate and ammonia. Escherichia coli DAP ammonia lyase gene was cloned and overexpressed in E. coli and the protein was purified to homogeneity and crystallized using the hanging-drop vapour-diffusion technique. Crystals of two different morphologies were obtained, one of which belonged to the tetragonal space group P4(1)2(1)2 (or P4(3)2(1)2), with unit-cell parameters a = b = 86.01, c = 209.56 A, and the other to the monoclinic space group P2(1), with unit-cell parameters a = 87.78, b = 94.35, c = 96.02 A, beta = 109.73 degrees. The tetragonal crystals diffracted X-rays to 3.0 A resolution, while diffraction from the monoclinic form extended to 2.5 A. Complete X-ray diffraction data sets have been collected for both crystal forms.

Mutation of interfacial residues disrupts subunit folding and particle assembly of Physalis mottle tymovirus

Virus-like particles (VLPs) serve as excellent model systems to identify the pathways of virus assembly. To gain insights into the assembly mechanisms of the Physalis mottle tymovirus (PhMV), six interfacial residues, identified based on the crystal structure of the native and recombinant capsids, were targeted for mutagenesis. The Q37E, Y67A, R68Q, D83A, I123A, and S145A mutants of the PhMV recombinant coat protein (rCP) expressed in Escherichia coli were soluble. However, except for the S145A mutant, which assembled into VLPs similar to that of wild type rCP capsids, all the other mutants failed to assemble into VLPs. Furthermore, the purified Q37E, Y67A, R68Q, D83A, and I123A rCP mutants existed essentially as partially folded monomers as revealed by sucrose density gradient analysis, circular dichroism, fluorescence, thermal, and urea denaturation studies. The rCP mutants locked into such conformations probably lack the structural signals/features that would allow them to assemble into capsids. Thus, the mutation of residues involved in inter-subunit interactions in PhMV disrupts both subunit folding and particle assembly.