The relation between meniscal dynamics and tibiofemoral kinematics

Over the past 30 years, research on meniscal kinematics has been limited by challenges such as low-resolution imaging and capturing continuous motion from static data. This study aimed to develop a computational knee model that overcomes these limitations and enables the continuous assessment of meniscal dynamics. A high-resolution MRI dataset (n = 11) was acquired in 4 configurations of knee flexion. In each configuration, the menisci were modeled based on the underlying osseous anatomy. Principal Polynomial Shape Analysis (PPSA) was employed for continuous meniscal modeling. Maximal medial anterior horn displacement occurred in 60° of flexion, equaling 6.24 mm posteromedial, while the posterior horn remained relatively stable. At 90° of flexion, the lateral anterior and posterior horn displaced posteromedially, amounting 5.70 mm and 6.51 mm respectively. The maximal observed Average Surface Distance (ASD) equaled 0.70 mm for lateral meniscal modeling in 90° of flexion. Based on our results, a strong relation between meniscal dynamics and tibiofemoral kinematics was confirmed. Expanding on static meniscal modeling and employing PPSA, we derived and validated a standardized and systematic methodological workflow.

Effect of sequential burr passes on minimally invasive akin and first metatarsal dorsiflexion osteotomies

BACKGROUND

Minimally invasive surgical (MIS) osteotomies are increasing as a surgical option for treating midfoot and forefoot conditions. This study aimed to evaluate the impact of each burr pass on the degree of correction, gap size, and alignment in MIS Akin and first metatarsal dorsiflexion osteotomies (DFO).

METHODS

MIS Akin and first metatarsal DFO were performed on ten cadaveric specimens. Fluoroscopic measurements included the metatarsal dorsiflexion angle (MDA), dorsal cortical length (MDCL), first phalangeal medial cortical length (PCML) and proximal to distal phalangeal articular angle (PDPAA).

RESULTS

The average decrease in PCML with each burr pass was as follows: 1.53, 1.33, 1.27, 1.23 and 1.13 mm at the 1st to 5th pass, respectively. The MDCL sequentially decreased by 1.80, 1.59, 1.35, 0.75, and 0.60 mm. The MDA consistently decreased, and the PDPAA incrementally became more valgus oriented.

CONCLUSION

On average, a first metatarsal dorsal wedge resection of 4.7 mm and first phalangeal medial wedge resection of 2.9 mm was achieved after 3 and 2 burr passes, respectively. This data may aid surgeons determine the optimal number of burr passes required to achieve the desired patient-specific surgical correction.

The Influence of Talar Displacement on Articular Contact Mechanics: A 3D Finite Element Analysis Study Using Weightbearing Computed Tomography

BACKGROUND

Talar displacement is considered the main predictive factor for poor outcomes and the development of post-traumatic osteoarthritis after ankle fractures. Isolated lateral talar translation, as previously studied by Ramsey and Hamilton using carbon powder imprinting, does not fully replicate the multidirectional joint subluxations seen in ankle fractures. The purpose of this study was to analyze the influence of multiple uniplanar talar displacements on tibiotalar contact mechanics utilizing weightbearing computed tomography (WBCT) and finite element analysis (FEA).

METHODS

Nineteen subjects (mean age = 37.6 years) with no history of ankle surgery or injury having undergone WBCT arthrogram (n = 1) and WBCT without arthrogram (n = 18) were included. Segmentation of the WBCT images into 3D simulated models of bone and cartilage was performed. Three-dimensional (3D) multiple uniplanar talar displacements were simulated to investigate the respective influence of various uniaxial displacements (including lateral translation, anteroposterior translation, varus-valgus angulation, and external rotation) on the tibiotalar contact mechanics using FEA. Tibiotalar peak contact stress and contact area were modeled for each displacement and its gradations.

RESULTS

Our modeling demonstrated that peak contact stress of the talus and tibia increased, whereas contact area decreased, with incremental displacement in all tested directions. Contact stress maps of the talus and tibia were computed for each displacement demonstrating unique patterns of pressure derangement. One millimeter of lateral translation resulted in 14% increase of peak talar contact pressure and a 3% decrease in contact area.

CONCLUSION

Our model predicted that with lateral talar translation, there is less noticeable change in tibiotalar contact area compared with prior studies whereas external rotation greater than 12 degrees had the largest effect on peak contact stress predictions.

LEVEL OF EVIDENCE

Level V, computational simulation study.

Quantifying walking speeds in relation to ankle biomechanics on a real-time interactive gait platform: a musculoskeletal modeling approach in healthy adults

Background: Given the inherent variability in walking speeds encountered in day-to-day activities, understanding the corresponding alterations in ankle biomechanics would provide valuable clinical insights. Therefore, the objective of this study was to examine the influence of different walking speeds on biomechanical parameters, utilizing gait analysis and musculoskeletal modelling. Methods: Twenty healthy volunteers without any lower limb medical history were included in this study. Treadmill-assisted gait-analysis with walking speeds of 0.8 m/s and 1.1 m/s was performed using the Gait Real-time Analysis Interactive Lab (GRAIL®). Collected kinematic data and ground reaction forces were processed via the AnyBody® modeling system to determine ankle kinetics and muscle forces of the lower leg. Data were statistically analyzed using statistical parametric mapping to reveal both spatiotemporal and magnitude significant differences. Results: Significant differences were found for both magnitude and spatiotemporal curves between 0.8 m/s and 1.1 m/s for the ankle flexion (p < 0.001), subtalar force (p < 0.001), ankle joint reaction force and muscles forces of the M. gastrocnemius, M. soleus and M. peroneus longus (α = 0.05). No significant spatiotemporal differences were found between 0.8 m/s and 1.1 m/s for the M. tibialis anterior and posterior. Discussion: A significant impact on ankle joint kinematics and kinetics was observed when comparing walking speeds of 0.8 m/s and 1.1 m/s. The findings of this study underscore the influence of walking speed on the biomechanics of the ankle. Such insights may provide a biomechanical rationale for several therapeutic and preventative strategies for ankle conditions.

Comparison between achilles tendon reinsertion and dorsal closing wedge calcaneal osteotomy for the treatment of insertional achilles tendinopathy: A meta-analysis

BACKGROUND

The debridement and Achilles tendon reinsertion (DATR) have been the most common surgical approach for the treatment of Insertional Achilles Tendinopathy (IAT), while dorsal closing wedge calcaneal osteotomy (DCWCO) has recently gained popularity as an alternative surgical option. This study aimed to systematically review the published literature on both surgical techniques and compare their clinical outcomes and complication rates.

METHODS

A systematic review was performed according to the PRISMA guidelines using Medline, Embase, and Scopus databases. The inclusion criteria encompassed clinical studies reporting functional outcomes and complications, with a minimum of 10 patients and at least 12 months of follow-up.

RESULTS

Seven studies (n = 169) were included for the analysis of DATR, and eight studies (n = 227) were included for the analysis of open DCWCO. Both groups showed a similar improvement in AOFAS score. The overall complication rates were 16.6% in the DATR group and 9.2% in the DCWCO group, but the difference was not statistically significant. However, there was a significantly higher incidence of wound complications in the DATR group (10.1%, 95% C.I.: 4.7-15.6) compared to the DCWCO group (2.5%, 95% C.I.: 0.6-4.4) as the confidence intervals did not overlap.

CONCLUSIONS

Clinical outcomes and overall complication rates of both techniques were comparable, although DCWCO had a lower incidence of wound complications. Further research should be focused on prospective studies comparing the two techniques to corroborate the current findings.

LEVEL OF EVIDENCE

Level IV; meta-analysis.

Effect of sequential burr passes on osteotomy magnitude and calcaneal morphology in minimally invasive Zadek osteotomy

PURPOSE

This study aimed to evaluate the impact of each burr pass on degree of correction, gap size and calcaneal morphology in MIS Zadek osteotomy.

METHODS

MIS Zadek osteotomy was performed on ten cadaveric specimens using a 3.1 mm Shannon burr. After each burr pass, the osteotomy gap was manually closed, and the subsequent burr passes were carried out with the foot held in dorsiflexion, which was repeated five times. Lateral X-rays were taken before and after each burr pass. Two independent reviewers measured the dorsal calcaneal length after each burr passage, as well as changes in several calcaneal parameters including X/Y ratio, Fowler Philip angle, and Böhler angle.

RESULTS

The average decrease in dorsal calcaneal cortical length with each burr pass was as follows: 2.6 ± 0.9 mm at the 1st pass, 2.4 ± 1 mm at the 2nd pass, 2 ± 1 mm at the 3rd pass, 1.6 ± 1 mm at the 4th pass, and 1.4 ± 0.7 mm at the 5th pass. The Fowler Philip and Böhler angles consistently decreased while the X/Y ratio consistently increased following each consecutive burr pass. Interobserver reliability analysis demonstrated good agreement for all parameters.

CONCLUSION

The results revealed the trends of length and anatomical changes in the calcaneus with each burr pass. On average, a dorsal wedge resection of 10 mm was achieved after 5 burr passes. This data can aid surgeons in determining the optimal number of burr passes required for a particular amount of resection, ensuring the attainment of the desired patient-specific surgical outcome.

Diagnostic applications and benefits of weightbearing CT in the foot and ankle: A systematic review of clinical studies

BACKGROUND

Foot and ankle weightbearing CT (WBCT) imaging has emerged over the past decade. However, a systematic review of diagnostic applications has not been conducted so far.

METHOD

A systematic literature search was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines after Prospective Register of Systematic Reviews (PROSPERO) registration. Studies analyzing diagnostic applications of WBCT were included. Main exclusion criteria were: cadaveric specimens and simulated WBCT. The Methodological Index for Non-Randomized Studies (MINORS) was used for quality assessment.

RESULTS

A total of 78 studies were eligible for review. Diagnostic applications were identified in following anatomical area's: ankle (n = 14); hindfoot (n = 41); midfoot (n = 4); forefoot (n = 19). Diagnostic applications that could not be used on weightbearing radiographs (WBRX) were reported in 56/78 studies. The mean MINORS was 9.8/24 (range: 8-12).

CONCLUSION

Diagnostic applications of WBCT were most frequent in the hindfoot, but other areas are on the rise. Post-processing of images was the main benefit compared to WBRX based on a moderate quality of the identified studies.

Medializing Calcaneal Osteotomy for progressive collapsing foot deformity alters the three-dimensional subtalar joint alignment

BACKGROUND

A medializing calcaneal osteotomy (MCO) is considered as one of the key inframalleolar osteotomies to correct progressive collapsing foot deformity (PCFD). While many studies were able to determine the post-operative hind- and midfoot alignment, alternations of the subtalar joint alignment remained obscured by superposition on plain radiography. Therefore, we aimed to assess the hind-, midfoot- and subtalar joint alignment pre- compared to post-operatively using 3D weightbearing CT (WBCT) imaging.

METHODS

Seventeen patients with a mean age of 42 ± 17 years were retrospectively analyzed. Inclusion criteria consisted of PCFD deformity corrected by a medializing calcaneal osteotomy (MCO) as main procedure and imaged by WBCT before and after surgery. Exclusion criteria were patients who had concomitant calcaneal lengthening osteotomies, mid-/hindfoot fusions, hindfoot coalitions, and supramalleolar procedures. Image data were used to generate 3D models and compute the hindfoot (HA), midfoot (MA) - and subtalar joint (STJ) alignment in the coronal, sagittal and axial plane, as well as distance maps.

RESULTS

Pre-operative measurements of the HA and MA improved significantly relative to their post-operative equivalents p < 0.05). The post-operative STJ alignment showed significant inversion (2.8° ± 1.7), abduction (1.5° ± 1.8), and dorsiflexion (2.3° ± 1.7) of the talus relative to the calcaneus (p < 0.05) compared to the pre-operative alignment. The displacement between the talus and calcaneus relative to the sinus tarsi increased significantly (0.6 mm±0.5; p < 0.05).

CONCLUSION

This study detected significant changes in the sagittal, coronal, and axial plane alignment of the subtalar joint, which corresponded to a decompression of the sinus tarsi. These findings contribute to our clinical practice by demonstrating the magnitude of alteration in the subtalar joint alignment that can be expected after PCFD correction with MCO as main procedure.

Unveiling Syndesmotic Malreduction: A Proof-of-Concept towards Portable Ultrasound Detection

Objectives

To evaluate the utility and diagnostic performance of portable handheld ultrasound for evaluating fibular rotation at the distal tibiofibular articulation after syndesmotic disruption.

Methods

Four above-the-knee cadaveric specimens were included. Syndesmotic disruption was precipitated by transecting the Anterior Inferior Tibiofibular Ligament, Interosseous Ligament, and Posterior Inferior Tibiofibular Ligament. Thereafter, a proximal fibular osteotomy was performed, and three conditions were modeled at the distal syndesmosis: 1) reduced, 2) 5 degree internal rotation malreduction, and 3) 5 degree external rotation malreduction. Two blinded observers performed separate ultrasonographic examinations for each condition at the level of both the anterior and posterior distal tibiofibular articular surfaces. Syndesmotic gap penetrance, defined as the ability of the P-US to generate signal between the distal fibula and tibia at the level of the incisura, was graded positive if the sonographic waves penetrated between the distal tibiofibular joint and negative if no penetrating waves were detected. The accuracy measures of the anterior and posterior gap penetrance were evaluated individually.

Results

Our preliminary results showed that posterior gap penetrance showed good performance when detecting either internal or external rotational malreduction of the fibula with very good specificity (87.5%) and PPV (90.0%). On the other hand, the anterior gap penetrance showed limited performance when detecting either form of rotational malreduction.

Conclusion

We introduced a novel sign, the "gap penetrance sign", best measured from the posterior ankle, which can accurately detect syndesmotic malreduction using P-US in a manner that does not require specific quantitative measurements and is readily accessible to early P-US users.

Application of external torque enhances the detection of subtle syndesmotic ankle instability in a weight-bearing CT

PURPOSE

Acute syndesmotic ankle injuries continue to impose a diagnostic dilemma and it remains unclear whether weightbearing and/or external rotation should be added during the imaging process. Therefore, the aim of this study was to assess if combined weightbearing and external rotation increases the diagnostic sensitivity of syndesmotic ankle instability using weightbearing CT (WBCT) imaging, compared to isolated weightbearing.

METHODS

In this retrospective study, patients with an acute syndesmotic ankle injury were analysed using a WBCT (N = 21; Age = 31.6 ± 14.1 years old). Inclusion criteria were an MRI confirmed syndesmotic ligament injury imaged by a WBCT of the ankle during weightbearing and combined weightbearing-external rotation. Exclusion criteria consisted of fracture associated syndesmotic injuries. Three-dimensional (3D) models were generated from the CT slices. Tibiofibular displacement and talar rotation were quantified using automated 3D measurements (anterior tibiofibular distance (ATFD), Alpha angle, posterior Tibiofibular distance (PTFD) and Talar rotation (TR) angle in comparison to the contralateral non-injured ankle.

RESULTS

The difference in neutral-stressed Alpha angle and ATFD showed a significant difference between patients with a syndesmotic ankle lesion and contralateral control (P = 0.046 and P = 0.039, respectively). The difference in neutral-stressed PTFD and TR angle did not show a significant difference between patients with a syndesmotic ankle lesion and healthy ankles (n.s.).

CONCLUSION

Application of combined weightbearing-external rotation reveals an increased ATFD in patients with syndesmotic ligament injuries. This study provides the first insights based on 3D measurements to support the potential relevance of applying external rotation during WBCT imaging. In clinical practice, this could enhance the current diagnostic accuracy of subtle syndesmotic instability in a non-invasive manner. However, to what extent certain displacement patterns require operative treatment strategies has yet to be determined in future studies.

LEVEL OF EVIDENCE

Level III.

Implementing automated 3D measurements to quantify reference values and side-to-side differences in the ankle syndesmosis

Detection of syndesmotic ankle instability remains challenging in clinical practice due to the limitations of two-dimensional (2D) measurements. The transition to automated three-dimensional (3D) measurement techniques is on the verge of a breakthrough but normative and side-to-side comparative data are missing. Therefore, our study aim was two-fold: (1) to establish 3D anatomical reference values of the ankle syndesmosis based on automated measurements and (2) to determine to what extent the ankle syndesmosis is symmetric across all 3D measurements. Patients without syndesmotic pathology with a non-weight-bearing CT scan (NWBCT; N = 38; Age = 51.6 ± 17.43 years) and weight-bearing CT scan (WBCT; N = 43; Age = 48.9 ± 14.3 years) were retrospectively included. After training and validation of a neural network to automate the segmentation of 3D ankle models, an iterative closest point registration was performed to superimpose the left on the right ankle. Subsequently, 3D measurements were manually and automatically computed using a custom-made algorithm and side-to-side comparison of these landmarks allowed one to investigate symmetry. Intra-observer analysis showed excellent agreements for all manual measurements (ICC range 0.85-0.99) and good (i.e. < 2.7° for the angles and < 0.5 mm for the distances) accuracy was found between the automated and manual measurements. A mean Dice coefficient of 0.99 was found for the automated segmentation framework. The established mean, standard deviation and range were provided for each 3D measurement. From these data, reference values were derived to differ physiological from pathological syndesmotic alignment. Furthermore, side-to-side symmetry was revealed when comparing left to right measurements (P > 0.05). In clinical practice, our novel algorithm could surmount the current limitations of manual 2D measurements and distinguish patients with a syndesmotic ankle lesion from normal variance.

Validation of a personalized ligament-constraining discrete element framework for computing ankle joint contact mechanics

BACKGROUND AND OBJECTIVE

Computer simulations of joint contact mechanics have great merit to improve our current understanding of articular ankle pathology. Owed to its computational simplicity, discrete element analysis (DEA) is an encouraging alternative to finite element analysis (FEA). However, previous DEA models lack subject-specific anatomy and may oversimplify the biomechanics of the ankle. The objective of this study was to develop and validate a personalized DEA framework that permits movement of the fibula and incorporates personalized cartilage thickness as well as ligamentous constraints.

METHODS

A linear and non-linear DEA framework, representing cartilage as compressive springs, was established, verified, and validated. Three-dimensional (3D) bony ankle models were constructed from cadaveric lower limb CT scans imaged during application of weight (85 kg) and/or torque (10 Nm). These 3D models were used to generate cartilage thickness and ligament insertion sites based on a previously validated statistical shape model. Ligaments were modelled as non-linear tension-only springs. Validation of contact stress prediction was performed using a simple, axially constrained tibiotalar DEA model against an equivalent FEA model. Validation of ligamentous constraints compared the final position of the ankle mortise to that of the cadaver after application of torque and sequential ligament sectioning. Finally, a combined ligamentous-constraining DEA model was validated for predicted contact stress against an equivalent ligament-constraining FEA model.

RESULTS

The linear and non-linear DEA model reproduced a mean articular contact stress within 0.36 MPa and 0.39 MPa of the FEA calculated stress, respectively. With respect to the ligamentous validation, the DEA ligament-balancing algorithm could reproduce the position of the distal fibula within the ankle mortise to within 0.97 mm of the experimental observed distal fibula. When combining the ligament-constraining and contact stress algorithm, DEA was able to reproduce a mean articular contact stress to within 0.50 MPa of the FEA calculated contact stress.

CONCLUSION

The DEA framework presented herein offers a computationally efficient alternative to FEA for the prediction of contact stress in the ankle joint, manifesting its potential to enhance the mechanical understanding of articular ankle pathologies on both a patient-specific and population-wide level. The novelty of this model lies in its personalized nature, inclusion of the distal tibiofibular joint and the use of non-linear ligament balancing to maintain the physiological ankle joint articulation.

Personalized statistical modeling of soft tissue structures in the knee

Background and Objective: As in vivo measurements of knee joint contact forces remain challenging, computational musculoskeletal modeling has been popularized as an encouraging solution for non-invasive estimation of joint mechanical loading. Computational musculoskeletal modeling typically relies on laborious manual segmentation as it requires reliable osseous and soft tissue geometry. To improve on feasibility and accuracy of patient-specific geometry predictions, a generic computational approach that can easily be scaled, morphed and fitted to patient-specific knee joint anatomy is presented.

Methods: A personalized prediction algorithm was established to derive soft tissue geometry of the knee, originating solely from skeletal anatomy. Based on a MRI dataset (n = 53), manual identification of soft-tissue anatomy and landmarks served as input for our model by use of geometric morphometrics. Topographic distance maps were generated for cartilage thickness predictions. Meniscal modeling relied on wrapping a triangular geometry with varying height and width from the anterior to the posterior root. Elastic mesh wrapping was applied for ligamentous and patellar tendon path modeling. Leave-one-out validation experiments were conducted for accuracy assessment.

Results: The Root Mean Square Error (RMSE) for the cartilage layers of the medial tibial plateau, the lateral tibial plateau, the femur and the patella equaled respectively 0.32 mm (range 0.14–0.48), 0.35 mm (range 0.16–0.53), 0.39 mm (range 0.15–0.80) and 0.75 mm (range 0.16–1.11). Similarly, the RMSE equaled respectively 1.16 mm (range 0.99–1.59), 0.91 mm (0.75–1.33), 2.93 mm (range 1.85–4.66) and 2.04 mm (1.88–3.29), calculated over the course of the anterior cruciate ligament, posterior cruciate ligament, the medial and the lateral meniscus.

Conclusion: A methodological workflow is presented for patient-specific, morphological knee joint modeling that avoids laborious segmentation. By allowing to accurately predict personalized geometry this method has the potential for generating large (virtual) sample sizes applicable for biomechanical research and improving personalized, computer-assisted medicine.

Statistical shape model-based tibiofibular assessment of syndesmotic ankle lesions using weight-bearing CT

Forced external rotation is hypothesized as the key mechanism of syndesmotic ankle injuries, inducing a three-dimensional deviation from the normal distal tibiofibular joint (DTFJ) alignment. However, current diagnostic imaging modalities are impeded by a two-dimensional assessment, without considering ligamentous stabilizers. Therefore, our aim is threefold: (1) to construct an articulated statistical shape model of the normal DTFJ with the inclusion of ligamentous morphometry, (2) to investigate the effect of weight-bearing on the DTFJ alignment, and (3) to detect differences in predicted syndesmotic ligament length of patients with syndesmotic lesions with respect to normative data. Training data comprised non-weight-bearing CT scans from asymptomatic controls (N = 76), weight-bearing CT scans from patients with syndesmotic ankle injury (N = 13), and their weight-bearing healthy contralateral side (N = 13). Path and length of the syndesmotic ligaments were predicted using a discrete element model, wrapped around bony contours. Statistical shape model evaluation was based on accuracy, generalization, and compactness. The predicted ligament length in patients with syndesmotic lesions was compared with healthy controls. With respect to the first aim, our presented skeletal shape model described the training data with an accuracy of 0.23 ± 0.028 mm. Mean prediction accuracy of ligament insertions was 0.53 ± 0.12 mm. In accordance with the second aim, our results showed an increased tibiofibular diastasis in healthy ankles after weight-bearing. Concerning our third aim, a statistically significant difference in anterior syndesmotic ligament length was found between ankles with syndesmotic lesions and healthy controls (p = 0.017). There was a significant correlation between the presence of syndesmotic injury and the positional alignment between the distal tibia and fibula (r = 0.873, p < 0,001). Clinical Significance: Statistical shape modeling combined with patient-specific ligament wrapping techniques can facilitate the diagnostic workup of syndesmosic ankle lesions under weight-bearing conditions. In doing so, an increased anterior tibiofibular distance was detected, corresponding to an "anterior open-book injury" of the ankle syndesmosis as a result of anterior inferior tibiofibular ligament elongation/rupture.

Statistical Shape Model-Based Tibiofibular Assessment of Syndesmotic Ankle Lesions using Weightbearing CT

Category:

Trauma; Ankle

Introduction/Purpose:

Forced external rotation is hypothesized as the key mechanism of syndesmotic ankle injuries, inducing a three-dimensional deviation from the normal distal tibiofibular joint alignment. These lesions, especially when subtle, present a deceitful diagnostic challenge. Current diagnostic imaging modalities are impeded by a two-dimensional assessment, without considering ligamentous stabilizers. Accurate diagnosis of syndesmotic lesions should involve 3D weightbearing osseous imaging in combination with - preferably automated- inclusion of patient-specific ligamentous information. Therefore, our aim is two-fold: (1) to construct a three-dimensional articulated statistical shape model of the normal distal tibiofibular joint with inclusion of ligamentous morphometry and (2) to detect differences in predicted syndesmotic ligament length of patients with syndesmotic lesions with respect to normative data.

Methods:

Training data comprised non-weightbearing CT scans from asymptomatic controls (N= 76, Mean age 63 +/- 19 years), weightbearing CT scans from patients with syndesmotic ankle injury (N = 13, Mean Age 35 +/- 15 years) and their weightbearing healthy contralateral side (N = 13). CT scan segmentation was used to generate 3D bone models in the control and patient group. All ankles were aligned based on the tibia. Path and length of the syndesmotic ligaments were predicted using a discrete element model, wrapped around bony contours. Statistical shape model evaluation was based on accuracy, generalization and compactness. The predicted ligament length in patients with syndesmotic lesions was compared to healthy controls by use of two-tailed Two- Sample student's t-test.

Results:

Our presented skeletal shape model described the training data with an accuracy of 0.23 +/- 0.028 mm. Mean prediction accuracy of ligament insertions was 0.53 +/- 0.12 mm. Mean length of the Anterior inferior tibiofibular ligament was 12.26 +- 1.89mm for the control cases, 12.32 +- 1.58 mm for the contralateral cases and 14.13 +- 1.48 mm for the cases with syndesmotic lesions. Statistically significant differences were found between the latter two (95% CI [ 0.323.29], p = 0.017) There was a significant correlation between presence of syndesmotic injury and the positional alignment between the distal tibia and fibula (r = 0.873, p < 0,001).

Conclusion:

Statistical shape modelling combined with patient-specific ligament wrapping techniques can facilitate the diagnostic workup of syndesmotic ankle lesions under weightbearing conditions. In doing so, an increased anterior tibiofibular distance was detected, corresponding to an 'anterior open-book injury' of the ankle syndesmosis as a result of anterior inferior tibiofibular ligament elongation/rupture (Figure 1).

Personalised statistical modelling of soft tissue structures in the ankle

BACKGROUND AND OBJECTIVE

Revealing the complexity behind subject-specific ankle joint mechanics requires simultaneous analysis of three-dimensional bony and soft-tissue structures. 3D musculoskeletal models have become pivotal in orthopedic treatment planning and biomechanical research. Since manual segmentation of these models is time-consuming and subject to manual errors, (semi-) automatic methods could improve the accuracy and enlarge the sample size of personalised 'in silico' biomechanical experiments and computer-assisted treatment planning. Therefore, our aim was to automatically predict ligament paths, cartilage topography and thickness in the ankle joint based on statistical shape modelling.

METHODS

A personalised cartilage and ligamentous prediction algorithm was established using geometric morphometrics, based on an 'in-house' generated lower limb skeletal model (N = 542), tibiotalar cartilage (N = 60) and ankle ligament segmentations (N = 10). For cartilage, a population-averaged thickness map was determined by use of partial least-squares regression. Ligaments were wrapped around bony contours based on iterative shortest path calculation. Accuracy of ligament path and cartilage thickness prediction was quantified using leave-one-out experiments. The novel personalised thickness prediction was compared with a constant cartilage thickness of 1.50 mm by use of a paired sample T-test.

RESULTS

Mean distance error of cartilage and ligament prediction was 0.12 mm (SD 0.04 mm) and 0.54 mm (SD 0.05 mm), respectively. No significant differences were found between the personalised thickness cartilage and segmented cartilage of the tibia (p = 0.73, CI [-1.60 .10^-17, 1.13 .10^-17]) and talus (p = 0.95, CI[ -1.35 .10^-17, 1.28 .10^-17]). For the constant thickness cartilage, a statistically significant difference was found in 89% and 92% of the tibial (p < 0.001, CI [0.51, 0.58]) and talar (p < 0.001, CI [0.33, 0.40]) cartilage area.

CONCLUSIONS

In this study, we described a personalised prediction algorithm of cartilage and ligaments in the ankle joint. We were able to predict cartilage and main ankle ligaments with submillimeter accuracy. The proposed method has a high potential for generating large (virtual) sample sizes in biomechanical research and mitigates technological advances in computer-assisted orthopaedic surgery.

Bilateral Comparison of the Three-dimensional Configuration in the Normal Ankle Syndesmosis: A non-Weightbearing and Weightbearing CT-analysis

Category:

Ankle

Introduction/Purpose:

Syndesmotic ankle injuries can be present in up to one-fifth of all ankle trauma and may lead to syndesmotic instability or posttraumatic ankle osteoarthirtis on the long term. It remains challenging to distinguish syndesmotic ankle injuries from other types of ankle trauma. Currently, diagnosis is based on plain radiographs by comparing 2D measurements of the injured to the non-injured side. However, it is unclear to what extent the 3D configuration of the normal ankle syndesmosis is symmetrical during non- or weightbearing conditions. Therefore, our aim was two-fold (1) to establish reference values based on three-dimensional side-to-side comparison of the normal ankle syndesmosis imaged by a non-weightbearing (NWBCT) and weightbearing CT (WBCT) (2) to compare measurements obtained from a NWBCT with those of a WBCT.

Methods:

In this retrospective comparative cohort study, patients with a NWBCT (N=38; Mean age=51+-17.4 years) and WBCT (N=43; Mean age=48+-14.3 years) were analyzed. Inclusion criteria were a bilateral NWBCT or WBCT of the foot and ankle between January 2016 and December 2018. Exclusion criteria consisted of hindfoot pathology and an age <18 years or >75 years. CT images were segmented to obtain 3D models. Computer Aided Design (CAD) operations were used to mirror the left ankle and superimpose it over the right ankle (Fig. 1A). The apex of the lateral malleolus (AML), anterior tubercle (ATF) and posterior tubercle (PTF) were determined. The difference in the coordinates attached to these anatomical landmarks of the left distal fibula in the ankle syndesmosis with respect to the right were used to establish reference values within two standard deviations. The Mann-Whitney U-test was used to compare measurements from a NWBCT with a WBCT.

Results:

Reference values within two standard deviations are given for each 3D measurement derived from a NWBCT and WBCT-scan (Fig 1B). The highest difference in translation was detected in the anterior-posterior direction (Mean APNWBCT= 0.161mm; 2SD=3.212/ Mean APWBCT= -0.082mm; 2SD=2.374). The highest difference in rotation was detected in the external- internal direction (Mean EINWBCT= -0.484°; 2SD=8.720/ Mean EIWBCT= -0,326°; 2SD=5.370). None of these differences were statistically significant in the normal ankle syndesmosis when obtained from a NWBCT scan compared to a WBCT scan (P>0.05).

Conclusion:

This study provides reference values of the three-dimensional configuration in the normal ankle syndesmosis based on side-to-side comparison. It did not demonstrate significant differences in the normal ankle syndesmosis between NWBT and WBCT scans. These novel 3D data contribute relevantly to previously established bilateral 2D radiographic reference values. In clinical practice, they will aid in distinguishing if a patient with a syndesmotic ankle lesion differs from normal variance in syndesmotic ankle symmetry.

Three-dimensional displacement after a medializing calcaneal osteotomy in relation to the osteotomy angle and hindfoot alignment

BACKGROUND

A medializing calcaneal osteotomy is frequently performed to correct adult-acquired flatfoot deformities, but there is lack of data on the associated three-dimensional variables defining the final correction. The aim of this study was to assess the correlation between the pre-operative hindfoot valgus deformity and calcaneal osteotomy angles and the post-operative calcaneal displacement.

METHODS

Weight-bearing CT scans obtained pre- and post-operatively were retrospectively analyzed for sixteen patients. Corresponding three-dimensional bone models were used to measure valgus deformity pre- and post-operatively, inclination of the osteotomy and displacement of the calcaneus. Linear regression was conducted to assess the relationship between these measurements.

RESULTS

On average, the hindfoot valgus changed from 13.1° (±4.6) pre-operatively to 5.7° (±4.3) post-operatively. A mean inferior displacement of 3.2mm (±1.3) was observed along the osteotomy with a mean inclination of 54.6° (±5.6), 80.5° (±10.7), -13.7° (±15.7) in the axial, sagittal and coronal planes, respectively. A statistically significant positive relationship (p<.05, R²=0.6) was found between the pre-operative valgus, the axial osteotomy inclination, and the inferior displacement.

CONCLUSIONS

This study shows that the degree of pre-operative hindfoot valgus and the axial osteotomy angle are predictive factors for the amount of post-operative inferior displacement of the calcaneus. These findings demonstrate the added value of a computer-based pre-operative planning in clinical practice. Level of evidence II Prospective comparative study.

[Retrospective study--pregnancy after assisted medical reproduction from 2001 to 2009 at the Central Hospital of Luxembourg (first section)]

Retrospective study on a nine year ART practice focusing on pregnancy outcomes and multiple pregnancies, their complications, the gestational duration, delivery options, the new born weights and health statements til the age of two. Post ART pregnancies seem to have an increased complication rate; multiple births are more frequent than with spontaneous conception. The first chapter deals with the entire group. The second chapter analyses several sub-groups according to the ART method employed. The results are compared to publications in PubMed and Medline.

[Retrospective studies of pregnancies after assisted medical reproduction from 2001-2009 and Central Hospital in Luxembourg (part 2)]

The first chapter analyses the ART methods of the Centre Hospitalier of Luxembourg, in the department of reproductive medicine between 2001 and 2009. The second chapter examines the techniques individually, their influence on pregnancy outcomes, the complications on offsprings and their health. The results coincide with literature in that risks are acceptable as long as good medical and biological conditions are maintained. Multiple pregnancies remain the most frequent complication, particularly once out of IVF. These are analysed separately as well as the pregnancies after egg and semen donation.

[Biological parameters for evaluation of ovarian reserve and resultant antimullerian hormone]

No biological parameter allows a predictive result in ART for ovary stimulation. We studied the interest of dosing AMH in ovary stimulation in balance with the the clinical context.

Doppler velocimetry and placental disease

Quantitative placental examinations were performed on 47 women who had Doppler flow velocity studies of the umbilical artery during their pregnancy. The systolic-diastolic ratio of the umbilical artery was used as the measurement parameter to divide the study population into two groups. Group 1 consisted of women with normal systolic-diastolic ratios (systolic-diastolic less than 3), and group 2 consisted of women with an elevated systolic-diastolic ratio (systolic-diastolic greater than or equal to 3). The group with an increase in systolic-diastolic ratio had more perinatal complications as demonstrated by two stillbirths, a higher incidence of cesarean deliveries for fetal distress, and more admissions to the neonatal intensive care unit. Significant differences were found when gestational age at delivery, placental weight, birth weight, and the number of small muscular arteries in the placenta were compared. Since gestational age may have accounted for the difference in placental findings, patients were matched for gestational age. The placental weights were comparable, but there were fewer small muscular arteries in those patients with an increase in systolic-diastolic ratio (p less than 0.001). In addition, when these findings were examined to determine the influence of diminished uterine flow velocity, none was found.