CARDIOPROTECTIVE EFFECT OF DICHLOROMETHANE VALERIAN (VALERIANA OFFICINALIS) EXTRACT ON ISCHEMIA-REPERFUSION-INDUCED CARDIAC INJURIES IN RATS

Background

Valepotriate is an active ingredient of valerian (Valeriana officinalis) with strong antioxidant activity that is effective for numerous cardiovascular diseases.

Objective

The aim of this study was to investigate the effect of an active ingredient of V. officinalis extract on ischemia-reperfusion-induced cardiac injuries in male rats.

Methods

Thirty-two male rats were subjected to ischemia for 40 minutes and reperfusion for five days. The rats were divided into 4 groups of 8 each; group 1 (control) was given normal saline, and groups 2-4 were gavaged with 0.2, 0.1, 0.05 mg/kg of valepotriate extract, respectively, and received extract (0.2 mg/kg ip) two weeks before ischemia induction.

Results

Dichloromethane V. officinalis (valepotriate) extract exerted a protective effect against ischemia-reperfusion-induced injuries. So that infarct size and number of ventricular arrhythmia and ventricular escape beats decreased compared to the control group. Moreover, ST segment amplitude, QTC interval, and heart rate decreased in the injured hearts and serum levels of antioxidant enzymes glutathione peroxidase, catalase, and superoxide dismutase increased. Biochemical markers malondialdehyde and lactate dehydrogenase also decreased on day 5 after the onset of reperfusion.

Conclusion

V. officinalis extract may have a protective effect against myocardial ischemia-reperfusion by producing antioxidant effects.

Sensitivity of actuation dynamics on normal and lateral Casimir forces: Interaction of phase change and topological insulator materials

We investigated here the influence of the lateral and normal Casimir force on the actuation dynamics between sinusoidal corrugated surfaces undergoing both normal and lateral displacements. The calculations were performed for topological insulators and phase change materials that are of high interest for device applications. The results show that the lateral Casimir force becomes stronger by increasing the material conductivity and the corrugations toward similar sizes producing wider normal separation changes during lateral motion. In a conservative system, bifurcation and Poincaré portrait analysis shows that larger but similar in size corrugations and/or higher material conductivity favor stable motion along the lateral direction. However, in the normal direction, the system shows higher sensitivity on the optical properties for similar in size corrugations leading to reduced stable operation for higher material conductivity. Furthermore, in non-conservative systems, the Melnikov function with the Poincaré portrait analysis was combined to probe the possible occurrence of chaotic motion. During lateral actuation, systems with more conductive materials and/or the same but high corrugations exhibit lower possibility for chaotic motion. By contrast, during normal motion, chaotic behavior leading to stiction of the moving components is more likely to occur for systems with more conductive materials and similar in magnitude corrugations.

Staphylococcal enterotoxins as good candidates for cancer immunotherapy: a systematic review

BACKGROUND

Cancer is considered as one of the leading causes of death today. The wrong lifestyles have led to an increase in the incidence rate of this deadly disease. There are many complications associated with common treatments of this disease. Immunotherapy is one of the new approaches taken recently. The purpose of this systematic review was to evaluate the studies on Staphylococcus aureus enterotoxins as a treatment of cancer worldwide.

STUDY DESIGN

We conducted a systematic review of articles published in PubMed, Cochrane, Scopus and Google scholar databases from 1995 to 2016 to evaluate the effects of Staphylococci enterotoxins on cancer.

METHODS

Eligible studies were evaluated qualitatively based on a checklist prepared by two independent reviewers, and they were subsequently matched.

RESULTS

Our review identified 97 records through searching PubMed and Cochrane database and 1306 records through searching Google scholar and Scopus. Forty six studies were excluded from PubMed and Cochrane database and 1281 studies were excluded from Google scholar and Scopus after screening abstracts and titles. Therefore, our systematic review was based on 51 publications on PubMed and Cochrane, and 25 publications on Google scholar and Scopus, which met our criteria. Staphylococcal enterotoxin A was the most commonly used toxin in these studies. The side effects of using this toxin in immunotherapy have been reported to be low and all studies have identified this toxin as a suitable option for immunotherapy.

CONCLUSIONS

The data obtained from these studies showed that due to the low rates of complications, Staphylococcal enterotoxins have the potential to induce immune system against various cancers as super-antigens. Therefore, they can be considered as a suitable candidate for immunotherapy of cancer.

A system architecture for parallel analysis of flux-balanced metabolic pathways

Elementary flux mode (EFM) analysis is a well-studied method in constraint-based modeling of metabolic networks. In EFM analysis, a network is decomposed into minimal functional pathways based on the assumption of balanced metabolic fluxes. In this paper, a system architecture is proposed that approximately models the functionality of metabolic networks. The AND/OR graph model is used to represent the metabolic network and each processing element in the system emulates the functionality of a metabolite. The system is implemented on a graphics processing unit (GPU) as the hardware platform using CUDA environment. The proposed architecture takes advantage of the inherent parallelism in the network structure in terms of both pathway and metabolite traversal. The function of each element is defined such that it can find flux-balanced pathways. Pathways in both small and large metabolic networks are applied to the proposed architecture and the results are discussed.

Chaotic motion due to lateral Casimir forces during nonlinear actuation dynamics

We investigated here the influence of the lateral Casimir force on the dynamical actuation of devices with interacting materials covering a broad range of optical properties ranging from poor to good conductors, such as, for example, nitrogen doped SiC and Au, respectively. The conservative actuating system shows a central heteroclinic orbit surrounded by a finite number of homoclinic orbits, because at higher periods, an increased lateral Casimir force will be necessary to counterbalance the restoring force. As a result, the conservative system reaches stable operation sooner for the higher conductivity materials (Au-Au), indicating the significant impact of the material optical properties on the lateral Casimir force. Furthermore, for the non-conservative driven systems, the decrement of the Melnikov parameter α leads to a faster disappearance of the satellite homoclinic orbits in the Poincaré portraits, followed by a strong shrinkage of the central heteroclinic orbit toward unstable chaotic motion. The latter is more pronounced for the lower conductivity materials since comparison shows the Au-Au system to be significantly more stable than the SiC-SiC system. Therefore, in actuating systems where the lateral Casimir force could play a significant role, the higher conductivity materials appear to be a better choice to ensure stable operation against a chaotic motion.

Sensitivity of nonequilibrium Casimir forces on low frequency optical properties toward chaotic motion of microsystems: Drude vs plasma model

Here, we investigate the sensitivity of nonequilibrium Casimir forces to optical properties at low frequencies via the Drude and plasma models and the associated effects on the actuation of microelectromechanical systems. The stability and chaotic motion for both autonomous conservative and nonconservative driven systems were explored assuming good, e.g., Au, and poor, e.g., doped SiC, interacting conductors having large static conductivity differences. For both material systems, we used the Drude and plasma methods to model the optical properties at low frequencies, where measurements are not feasible. In fact, for the conservative actuating system, bifurcation and phase space analysis show that the system motion is strongly influenced by the thermal nonequilibrium effects depending on the modeling of the optical properties at low frequencies, where also the presence of residual electrostatic forces can also drastically alter the actuating state of the system, depending strongly on the material conductivity. For nonconservative systems, the Melnikov function approach is used to explore the presence of chaotic motion rendering predictions of stable actuation or malfunction due to stiction on a long-term time scale rather impossible. In fact, the thermal effects produce the opposite effect for the emerging chaotic behavior for the Au-Au and SiC-SiC systems if the Drude model is used to model the low optical frequencies. However, using the plasma model, only for the poor conducting SiC-SiC system, the chance of chaotic motion is enhanced, while for the good conducting Au-Au system, the chaotic behavior will remain unaffected at relatively short separations (<2 μm).

Predicting degradation rate of genipin cross-linked gelatin scaffolds with machine learning

Genipin can improve weak mechanical properties and control high degradation rate of gelatin, as a cross-linker of gelatin which is widely used in tissue engineering. In this study, genipin cross-linked gelatin biodegradable porous scaffolds with different weight percentages of gelatin and genipin were prepared for tissue regeneration and measurement of their various properties including morphological characteristics, mechanical properties, swelling, degree of crosslinking and degradation rate. Results indicated that the sample containing the highest amount of gelatin and genipin had the highest degree of crosslinking and increasing the percentage of genipin from 0.125% to 0.5% enhances ultimate tensile strength (UTS) up to 113% and 92%, for samples with 2.5% and 10% gelatin, respectively. For these samples, increasing the percentage of genipin, reduce their degradation rate significantly with an average value of 124%. Furthermore, experimental data are used to develop a machine learning model, which compares artificial neural networks (ANN) and kernel ridge regression (KRR) to predict degradation rate of genipin-cross-linked gelatin scaffolds as a property of interest. The predicted degradation rate demonstrates that the ANN, with mean squared error (MSE) of 2.68%, outperforms the KRR with MSE = 4.78% in terms of accuracy. These results suggest that machine learning models offer an excellent prediction accuracy to estimate the degradation rate which will significantly help reducing experimental costs needed to carry out scaffold design.

Sensitivity of chaotic behavior to low optical frequencies of a double-beam torsional actuator

We investigate here how the optical properties at low frequencies affect the actuation dynamics and emerging chaotic behavior in a double-beam torsion actuator at nanoscale separations (<200nm), where the Casimir forces and torques play a major role. In fact, we take into account differences of the Casimir force due to alternative modeling of optical properties at low frequencies, where measurements are not feasible, via the Drude and plasma models, and repercussions by different material preparation conditions. For conservative autonomous actuation, bifurcation and phase portrait analysis indicate that both factors affect the stability of an actuating device in such a way that stronger Casimir forces and torques will favor increased unstable behavior. The latter will be enhanced by unbalanced application of electrostatic voltages in double-beam actuating systems. For the case of a time-periodic driving force, we use a Melnikov function and a phase plane analysis to study the emerging chaotic behavior with respect to the Drude and plasma modeling and material preparation conditions. We find indications that any factor that leads to stronger Casimir interactions will aid chaotic behavior and prevent long term prediction of the actuating dynamics. Moreover, in a double-beam actuator chaoticity will be amplified by the application of unbalanced electrostatic voltages. Therefore, the details of modeling of optical properties and the material preparations conditions must be carefully considered in the design of actuating devices at nanoscale because here Casimir forces are omnipresent and broadband type interactions.

Dependence of non-equilibrium Casimir forces on material optical properties toward chaotic motion during device actuation

The sensitivity of nonequilibrium Casimir forces on material optical properties can have strong impact on the actuation of devices. For this purpose, we considered nonequilibrium Casimir interactions between good and poor conductors, for example, gold (Au) and highly doped silicon carbide (SiC), respectively. Indeed, for autonomous conservative systems, the bifurcation and phase portrait analysis have shown that the nonequilibrium Casimir forces can have significant impact on the stable and unstable operating regimes depending on the material optical properties. At a few micrometer separations, for systems with high conductivity materials, an increasing temperature difference between the actuating components can enhance the stable operation range due to the reduction of the Casimir force, while for the poor conductive materials, the opposite takes place. For periodically driven dissipative systems, the Melnikov function and Poincare portrait analysis have shown that for poor conductive systems, the nonequilibrium Casimir forces lead to an increased possibility for chaotic behavior and stiction with an increasing temperature difference between the actuating components. However, for good conducting systems, the thermal contribution to Casimir forces reduces the possibility for chaotic behavior with increasing temperature, as comparison with systems without thermal fluctuations shows. Nevertheless, the positive benefit of good conductors toward increased actuation stability and reduced the chaotic behavior under nonequilibrium conditions can be easily compromised by any voltage application. Therefore, thermal, nonequilibrium Casimir forces can influence the actuation of devices toward unstable and chaotic behavior in strong correlation with their optical properties, and associated conduction state, as well as applied electrostatic potentials.

Differentiation of Brucella abortus and B. melitensis biovars using PCR-RFLP and REP-PCR

Brucellosis is one of the most common zoonotic diseases of animal and human beings. This study aimed to differentiate the Brucella spp. and determines the patterns of biovars by using repetitive element palindromic (REP)-PCR and PCR restriction fragment length polymorphism (RFLP) methods. A total of 100 blood specimens suspected of harbouring brucellosis were collected. Conventional culture methods and multiplex PCR were used for the detection of Brucella genus and species; and REP-PCR was used for Brucella spp. differentiation and polymorphisms sequence analysis. In addition, to identify the biovar patterns of REP-PCR, PCR-RFLP was used. Eighty-three samples were identified as harbouring Brucella spp. by the implementation of multiplex PCR, 72 of which were detected as Brucella melitensis and 11 as B. abortus. Also, through analysing the results of PCR-RFLP, it was found that of 72 B. melitensis samples, 69 were B. melitensis biovar 1 and three species were from other biovars. In addition, the obtained patterns for all of the B. abortus samples were from biovars 3, 5, 6 and 9. This study also optimized a test for the detection of Brucella biovar with the REP-PCR method such that Brucella spp. and biovars could be separated in the shortest possible time.

Dependence of chaotic behavior on optical properties and electrostatic effects in double-beam torsional Casimir actuation

We investigate the influence of Casimir and electrostatic torques on double-beam torsional microelectromechanical systems with materials covering a broad range of conductivities of more than three orders of magnitude. For the frictionless autonomous systems, bifurcation and phase space analysis shows a significant difference between stable and unstable operating regimes for equal and unequal applied voltages on both sides of the double torsional system giving rise to heteroclinic and homoclinic orbits, respectively. For equal applied voltages, only the position of a symmetric unstable saddle equilibrium point is dependent on the material optical properties and electrostatic effects, while in any other case stable and unstable equilibrium points are dependent on both factors. For the periodically driven system, a Melnikov function approach is used to show the presence of chaotic motion rendering predictions of whether stiction or stable actuation will take place over long times impossible. Chaotic behavior introduces significant risk for stiction, and it is more likely to occur for the more conductive systems that experience stronger Casimir forces and torques. Indeed, when unequal voltages are applied, the sensitive dependence of chaotic motion on electrostatics is more pronounced for the highest conductivity systems.

Chaotic behavior in Casimir oscillators: A case study for phase-change materials

Casimir forces between material surfaces at close proximity of less than 200 nm can lead to increased chaotic behavior of actuating devices depending on the strength of the Casimir interaction. We investigate these phenomena for phase-change materials in torsional oscillators, where the amorphous to crystalline phase transitions lead to transitions between high and low Casimir force and torque states, respectively, without material compositions. For a conservative system bifurcation curve and Poincare maps analysis show the absence of chaotic behavior but with the crystalline phase (high force-torque state) favoring more unstable behavior and stiction. However, for a nonconservative system chaotic behavior can take place introducing significant risk for stiction, which is again more pronounced for the crystalline phase. The latter illustrates the more general scenario that stronger Casimir forces and torques increase the possibility for chaotic behavior. The latter is making it impossible to predict whether stiction or stable actuation will occur on a long-term basis, and it is setting limitations in the design of micronano devices operating at short-range nanoscale separations.

A graph-based approach to analyze flux-balanced pathways in metabolic networks

An elementary flux mode (EFM) is a pathway with minimum set of reactions that are functional in steady-state constrained space. Due to the high computational complexity of calculating EFMs, different approaches have been proposed to find these flux-balanced pathways. In this paper, an approach to find a subset of EFMs is proposed based on a graph data model. The given metabolic network is mapped to the graph model and decisions for reaction inclusion can be made based on metabolites and their associated reactions. This notion makes the approach more convenient to categorize the output pathways. Implications of the proposed method on metabolic networks are discussed.

Optimization of sulfate removal from wastewater using magnetic multi-walled carbon nanotubes by response surface methodology

This paper reports a facile method for removal of sulfate from wastewater by magnetic multi-walled carbon nanotubes (MMWCNTs). Multi-walled carbon nanotubes and MMWCNTs were characterized by X-ray diffraction, Raman, transmission electron microscopy, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. The results of the analysis indicated that MMWCNTs were synthesized successfully. The MMWCNTs can be easily manipulated in a magnetic field for the desired separation, leading to the removal of sulfate from wastewater. Response surface methodology (RSM) coupled with central composite design was applied to evaluate the effects of D/C (adsorbent dosage per initial concentration of pollutant (mg_adsorbent/(mg/l)_initial)) and pH on sulfate removal (%). Using RSM methodology, a quadratic polynomial equation was obtained, for removal of sulfate, by multiple regression analysis. The optimum combination for maximum sulfate removal of 93.28% was pH = 5.96 and D/C = 24.35. The experimental data were evaluated by the Langmuir and Freundlich adsorption models. The adsorption capacity of sulfate in the studied concentration range was 56.94 (mg/g). It was found out that the MMWCNTs could be considered as a promising adsorbent for the removal of sulfate from wastewater.

High pressure gas flow, storage, and displacement in fractured rock-Experimental setup development and application

This paper presents the design, development, and application of a laboratory setup for the experimental investigations of gas flow and reactions in a fractured rock. The laboratory facility comprises (i) a high pressure manometric sorption apparatus, where equilibrium and kinetic phenomena of adsorption and desorption can be examined, (ii) a high pressure triaxial core flooding system where the chemical reactive transport properties or processes can be explored, and (iii) an ancillary system including pure and mixed gas supply and analysis units. Underground conditions, in terms of pore pressure, confining pressure, and temperature, can be replicated using the triaxial core flooding system developed for depths up to 2 km. Core flooding experiments can be conducted under a range of gas injection pressures up to 20 MPa and temperatures up to 338 K. Details of the design considerations and the specification for the critical measuring instruments are described. The newly developed laboratory facility has been applied to study the adsorption of N₂, CH₄, and CO₂ relevant to applications in carbon sequestration in coal and enhanced coalbed methane recovery. Under a wide range of pressures, the flow of helium in a core sample was studied and the evolution of absolute permeability at different effective stress conditions has been investigated. A comprehensive set of high resolution data has been produced on anthracite coal samples from the South Wales coalfield, using the developed apparatus. The results of the applications provide improved insight into the high pressure flow and reaction of various gas species in the coal samples from the South Wales coalfield.

Capillary-force measurement on SiC surfaces

Capillary forces have been measured by atomic force microscopy in the sphere-plate geometry, in a controlled humidity environment, between smooth silicon carbide and borosilicate glass spheres. The force measurements were performed as a function of the rms surface roughness ∼4-14 nm mainly due to sphere morphology, the relative humidity (RH) ∼0%-40%, the applied load on the cantilever, and the contact time. The pull-off force was found to decrease by nearly two orders of magnitude with increasing rms roughness from 8 to 14 nm due to formation of a few capillary menisci for the roughest surfaces, while it remained unchanged for rms roughness <8 nm implying fully wetted surface features leading to a single meniscus. The latter reached a steady state in less than 5 s for the smoothest surfaces, as force measurements versus contact time indicated for increased RH∼40%. Finally, the pull-off force increases and reaches a maximum with applied load, which is associated with plastic deformation of surface asperities, and decreases at higher loads.

Influence of materials' optical response on actuation dynamics by Casimir forces

The dependence of the Casimir force on the frequency-dependent dielectric functions of interacting materials makes it possible to tailor the actuation dynamics of microactuators. The Casimir force is largest for metallic interacting systems due to the high absorption of conduction electrons in the far-infrared range. For less conductive systems, such as phase change materials or conductive silicon carbide, the reduced force offers the advantage of increased stable operation of MEMS devices against pull-in instabilities that lead to unwanted stiction. Bifurcation analysis with phase portraits has been used to compare the sensitivity of a model actuator when the optical properties are altered.

Thorough investigation of varying template combinations on SAPO-34 synthesis, catalytic activity and stability in the methanol conversion to light olefin

Crystals of SAPO-34 molecular sieves were synthesized under hydrothermal conditions by using tetraethylammonium hydroxide, morpholine and a mixture of them as structure-directing agents.

Involvement of ligninolytic enzymes of Phanerochaete chrysosporium in treating the textile effluent containing Astrazon Red FBL in a packed-bed bioreactor

The effect of Tween80, Mn(II) and veratryl alcohol (VA) on the production of ligninolytic enzymes of Phanerochaete chrysosporium in a packed-bed bioreactor using small pieces of Kissiris as carrier, was investigated. The results of the enzyme activities were noticeable in terms of decolorization and COD removal of the textile effluent containing an azo dye (Astrazon Red FBL). No dilution was made on the tested textile effluent and it was not sterilized, also. Maximum decolorization of the dye (87%) and COD removal (42%), both occurred when only Tween80 (0.05%, w/v) was added to the effluent. The maximum activities of lignin peroxidase (LiP) and manganese peroxidase (MnP) were (U/l): 17 and 52, respectively. The role of MnP was pronounced in the dye decolorization process, while the influence of LiP was noticeable on COD removal. The reusability of the original biomass was examined by replacing undiluted textile effluent (i.e., five times). The cellular performance of the original biomass in repeated-batch operations was promising.

Prevalence of Mental Health Patient Hospitalized in Medical Wards in Beheshti Hospital in 2007

Mental disorders are one of the most problems in the world and influence on medical disease thus this study investigated the prevalence of mental disorders in medical wards of Beheshti hospital.

Method and materials:

This study was a descriptive research in 260 patients hospitalized in medical wards of Beheshti hospital. Data was collected in two groups:

1.

Result:

54.2% suffered from mental disorder include: mood disorder (34.2%), anxiety disorder (9.6%), somatoform disorder (1.5%) and psychosis (0.4%). The rate of illness in female was 56.9% versus 42.7% in male. Prevalence of psychotic disorder is more than findings of Higashi and Yashiro (27 to 39%) and Koeng in Duke university (36.5% MDD).

Conclusion:

Mental disorders are common in general hospital and consult with psychiatrist and liasion psychiatry is very important.