Microfluidic-derived docosahexaenoic acid liposomes for glioblastoma therapy

Glioblastoma (GBM) is the most prevalent malignant primary brain tumor and currently lacks an effective treatment. In this study, we utilized a microfluidic system to synthesize docosahexaenoic acid (DHA) liposomes for GBM therapy. DHA is an omega-3 (ω3) polyunsaturated fatty acid commonly found in human dietary consumption that has demonstrated potential in mitigating cancer development. The microfluidic device employed allowed for precise fine-tuning of the physicochemical properties of liposomes by adjusting the flow rate ratios, flow rates, and lipid concentrations. Three distinct-sized liposomes, ranging from 80 nm and 130 nm, were successfully internalized by GBM cells, and demonstrated the ability to reduce the viability of these cells. Furthermore, DHA liposomes proved significantly more efficient in triggering apoptotic pathways, through caspase-3-dependent mechanisms, in comparison to free DHA. Thus, the nanomedicine platform established in this study presents new opportunities in the development of liposome formulations incorporating ω3 fatty acids for cancer therapy.

Macrophage cell membrane infused biomimetic liposomes for glioblastoma targeted therapy

Glioblastoma (GBM) is a highly aggressive malignant brain tumor currently without an effective treatment. Inspired by the recent advances in cell membrane biomimetic nanocarriers and by the key role of macrophages in GBM pathology, we developed macrophage membrane liposomes (MML) for GBM targeting. For the first time, it was assessed the role of macrophage polarization states in the effectiveness of these drug delivery systems. Interestingly, we observed that MML derived from M2 macrophages (M2 MML) presents higher uptake and increased delivery of the anticarcinogenic drug doxorubicin compared to M1 macrophage-derived nanocarriers (M1 MML) and control liposomes (CL). Moreover, the lowest uptake by macrophages of MML reveals promising immune escaping properties. Notably, M2 macrophages unveiled a higher expression of integrin CD49d, a crucial protein involved in the bilateral communication of macrophages with tumor cells. Therefore, our findings suggest the potential of using M2 macrophage membranes to develop novel nanocarriers targeting GBM.

Biomimetic surface topography as a potential modulator of macrophages inflammatory response to biomaterials

The implantation of biomaterial devices can negatively impact the local microenvironment through several processes including the injury incurred during the implantation process and the associated host inflammatory response. Immune cell responses to implantable biomaterial devices mediate host-material interactions. Indeed, the immune system plays a central role in several biological processes required for the integration of biomaterials such as wound healing, tissue integration, inflammation, and foreign body reactions. The implant physicochemical properties such as size, shape, surface area, topography, and chemistry have been shown to provide cues to the immune system. Its induced immune-modulatory responses towards inflammatory or wound healing phenotypes can determine the success of the implant. In this work, we aim to evaluate the impact of some biomimetic surface topographies on macrophages' acute inflammatory response. For that, we selected 4 different biological surfaces to replicate through soft lithography on spin casting PCL membranes. Those topographies were: the surface of E. coli, S.eppidermidis and L929 cells cultured in polystyrene tissue culture disks, and an Eggshell membrane. We selected a model based on THP-1-derived macrophages to study the analysis of the expression of both pro-inflammatory and anti-inflammatory markers. Our results revealed that depending on the surface where these cells are seeded, they present different phenotypes. Macrophages present a M1-like phenotype when they are cultured on top of PCL membranes with the surface topography of E. coli and S. epidermidis. When cultured on membranes with L929 monolayers or Eggshell membrane surface topography, the macrophages present a M2-like phenotype. These results can be a significant advance in the development of new implantable biomaterial devices since they can help to modulate the inflammatory responses to implanted biomaterials by controlling their surface topography.

Erythrocyte-derived liposomes for the treatment of inflammatory diseases

Effective and safe therapies to counteract persistent inflammation are necessary. We developed erythrocyte-derived liposomes (EDLs) with intrinsic anti-inflammatory activity. The EDLs were prepared using lipids extracted from erythrocyte membranes, which are rich in omega-3 fatty acids with several health benefits. Diclofenac, a widely used anti-inflammatory drug, was incorporated into EDLs in relevant therapeutic concentrations. The EDLs were also functionalized with folic acid to allow their active targeting of M1 macrophages, which are key players in inflammatory processes. In the presence of lipopolysaccharide (LPS)-stimulated macrophages, empty EDLs and EDLs incorporating diclofenac were able to reduce the levels of important pro-inflammatory cytokines, namely interleukin-6 (IL-6; ≈85% and 77%, respectively) and tumor necrosis factor-alpha (TNF-α; ≈64% and 72%, respectively). Strikingly, cytocompatible concentrations of EDLs presented similar effects to dexamethasone, a potent anti-inflammatory drug, in reducing IL-6 and TNF-α concentrations, demonstrating the EDLs potential to be used as bioactive carriers in the treatment of inflammatory diseases.

Microfluidicmixing system for precise PLGA-PEG nanoparticles size control

In this study, a microfluidic device was employed to produce polymeric nanoparticles (NPs) with well-controlled sizes. The influence of several parameters in the synthesis process, namely, polymer concentration, flow rate and flow rate ratio between the aqueous and organic solutions was investigated. To evaluate the NPs size effect, three diameters were selected (30, 50 and 70nm). Their cytocompatibility was demonstrated on endothelial cells and macrophages. Additionally, their efficacy to act as drug carriers was assessed in an in vitro inflammatory scenario. NPs loaded and released diclofenac (DCF) in a size-dependent profile (smaller sizes presented lower DCF content and higher release rate). Moreover, 30nm NPs were the most effective in reducing prostaglandin E₂ concentration. Therefore, this study demonstrates that microfluidics can generate stable NPs with controlled sizes, high monodispersity and enhanced batch-to-batch reproducibility. Indeed, NPs size is a crucial parameter for drug encapsulation, release and overall biological efficacy.

Fabrication of biomimetic patterned PCL membranes mimicking the complexity of Rubus fruticosus leaves surface

The development of bioresponsive interfaces that can induce a beneficial impact on cell mechanisms, such as adhesion, proliferation, migration and differentiation are of utmost relevance in Tissue engineering (TE) approaches. The surface topography is a captivating property that contribute to interesting cell responses, being inspired by several cues found in nature. Therefore, the study herein presented reports the fabrication of a surface topography using the Rubus fruticosus leaf on spin casting polycaprolactone (PCL) membranes. The topography was replicated by replica molding rapid fabrication technique and nanoimprint lithography (NIL). The biomimetic patterned PCL membranes (bpM) were successfully produced revealing high detail due to the complexity of the leaf's surface ranging from the stroma structures to nerves structures. The thermal evaluation revealed a slight increase of crystallinity of the bpM compared with the other tested conditions. However, did not induce significant effects on the melting and recrystallization temperatures. The mechanical properties revealed that the young modulus increase from 3.2 MPa to 4.4 MPa during the imprinting process. However, bpM presents a lowest elongation capacity than bare membrane (bM) (1076 to 444 %, respectively) due to the heterogeneous thickness induced by the topography. The selected topography revealed to promote a positive bioresponse, depicted by the improvement of the cellular behaviour and different organization. This promising strategy revealed that circumventing the traditional topographies by nature mimetic topographies is fundamental for the development of innovative bioresponsive substrates that can tune cellular behaviour in TE strategies.

In vitro chondrogenic commitment of human Wharton's jelly stem cells by co-culture with human articular chondrocytes

Wharton's jelly stem cells (WJSCs) are a potential source of transplantable stem cells in cartilage-regenerative strategies, due to their highly proliferative and multilineage differentiation capacity. We hypothesized that a non-direct co-culture system with human articular chondrocytes (hACs) could enhance the potential chondrogenic phenotype of hWJSCs during the expansion phase compared to those expanded in monoculture conditions. Primary hWJSCs were cultured in the bottom of a multiwell plate separated by a porous transwell membrane insert seeded with hACs. No statistically significant differences in hWJSCs duplication number were observed under either of the culture conditions during the expansion phase. hWJSCs under co-culture conditions show upregulations of collagen type I and II, COMP, TGFβ1 and aggrecan, as well as of the main cartilage transcription factor, SOX9, when compared to those cultured in the absence of chondrocytes. Chondrogenic differentiation of hWJSCs, previously expanded in co-culture and monoculture conditions, was evaluated for each cellular passage using the micromass culture model. Cells expanded in co-culture showed higher accumulation of glycosaminoglycans (GAGs) compared to cells in monoculture, and immunohistochemistry for localization of collagen type I revealed a strong detection signal when hWJSCs were expanded under monoculture conditions. In contrast, type II collagen was detected when cells were expanded under co-culture conditions, where numerous round-shaped cell clusters were observed. Using a micromass differentiation model, hWJSCs, previously exposed to soluble factors secreted by hACs, were able to express higher levels of chondrogenic genes with deposition of cartilage extracellular matrix components, suggesting their use as an alternative cell source for treating degenerated cartilage. Copyright © 2015 John Wiley & Sons, Ltd.

Unveiling the effects of the secretome of mesenchymal progenitors from the umbilical cord in different neuronal cell populations

It has been previously shown that the secretome of Human Umbilical Cord Perivascular Cells (HUCPVCs), known for their mesenchymal like stem cell character, is able to increase the metabolic viability and hippocampal neuronal cell densities. However, due to the different micro-environments of the distinct brain regions it is important to study if neurons isolated from different areas have similar, or opposite, reactions when in the presence of HUCPVCs secretome (in the form of conditioned media-CM). In this work we: 1) studied how cortical and cerebellar neuronal primary cultures behaved when incubated with HUCPVCs CM and 2) characterized the differences between CM collected at two different conditioning time points. Primary cultures of cerebellar and cortical neurons were incubated with HUCPVCs CM (obtained 24 and 96 h after three days of culturing). HUCPVCs CM had a higher impact on the metabolic viability and proliferation of cortical cultures, than the cerebellar ones. Regarding neuronal cell densities it was observed that with 24 h CM condition there were higher number MAP-2 positive cells, a marker for fully differentiated neurons; this was, once again, more evident in cortical cultures. In an attempt to characterize the differences between the two conditioning time points a proteomics approach was followed, based on 2D Gel analysis followed by the identification of selected spots by tandem mass spectrometry. Results revealed important differences in proteins that have been previously related with phenomena such as neurl cell viability, proliferation and differentiation, namely 14-3-3, UCHL1, hsp70 and peroxiredoxin-6. In summary, we demonstrated differences on how neurons isolated from different brain regions react to HUCPVCs secretome and we have identified different proteins (14-3-3 and hsp70) in HUCPVCs CM that may explain the above-referred results.

Chitosan-poly(butylene succinate) scaffolds and human bone marrow stromal cells induce bone repair in a mouse calvaria model

Tissue engineering sustains the need of a three-dimensional (3D) scaffold to promote the regeneration of tissues in volume. Usually, scaffolds are seeded with an adequate cell population, allowing their growth and maturation upon implantation in vivo. Previous studies obtained by our group evidenced significant growth patterns and osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) when seeded and cultured on melt-based porous chitosan fibre mesh scaffolds (cell constructs). Therefore, it is crucial to test the in vivo performance of these in vitro 3D cell constructs. In this study, chitosan-based scaffolds were seeded and cultured in vitro with hBMSCs for 3 weeks under osteogenic stimulation conditions and analysed for cell adhesion, proliferation and differentiation. Implantation of 2 weeks precultured cell constructs in osteogenic culture conditions was performed into critical cranial size defects in nude mice. The objective of this study was to verify the scaffold integration and new bone formation. At 8 weeks of implantation, scaffolds were harvested and prepared for micro-computed tomography (µCT) analysis. Retrieved implants showed good integration with the surrounding tissue and significant bone formation, more evident for the scaffolds cultured and implanted with human cells. The results of this work demonstrated that chitosan-based scaffolds, besides supporting in vitro proliferation and osteogenic differentiation of hBMSCs, induced bone formation in vivo. Thus, their osteogenic potential in orthotopic location in immunodeficient mice was validated, evidencing good prospects for their use in bone tissue-engineering therapies.

Osteogenic differentiation of two distinct subpopulations of human adipose-derived stem cells: an in vitro and in vivo study

The first stem cells considered for the reconstruction of bone were bone marrow mesenchymal stem cells (BMSCs). Subsequently, cells with similar marker expression panel and differentiation potential were found in new sources of cells, such as adipose tissue. This source of stem cells has a promising future in tissue-engineering applications, considering the abundance of this tissue in the human body, the easy harvesting and the high number of stem cells that are available from such a small amount of tissue. The isolation of the adipose stem cells is generally performed by means of enzymatic digestion of the tissues, followed by a natural selection of the stem cells based on their capacity to adhere to the culture flasks, leading to a quite heterogeneous population. This constitutes a major drawback for the use of these cells, since the heterogeneity of the cell culture obtained can compromise their proliferation and differentiation potential. In the present study we have analysed the in vitro and in vivo behaviour of two selected subpopulations with high osteogenic potential. For this purpose, ASCs(CD29+) and ASCs (STRO-1+)subpopulations were isolated and in vitro cultured onto a biodegradable polymeric scaffold, using osteogenic medium, before implantation in a nude mice model. The biodegradable polymeric scaffold used is a fibre-mesh structure based on a blend of starch and polycaprolatone (SPCL) that has been successfully used in several bone tissue-engineering studies. The implanted ASCs-scaffold constructs promoted the formation of new bone tissue in nude mice. However, the results obtained show differences in the behaviour of the two ASCs subpopulations under study, particularly regarding their potential to differentiate into the osteogenic lineage, and allowed the indentification of ASCs (STRO-1+) as the best subpopulation for bone tissue-engineering applications.

Chondrogenic differentiation of human bone marrow mesenchymal stem cells in chitosan-based scaffolds using a flow-perfusion bioreactor

Native articular cartilage is subjected to synovial fluid flow during normal joint function. Thus, it is believed that the morphogenesis of articular cartilage may be positively regulated by the application of similar stimulation in vitro. In the present study, the effect of fluid flow over the chondrogenic differentiation of human bone marrow-derived mesenchymal stem cells (hBM-MSCs) was investigated. We intended to find out whether the shear stress caused by perfusion of the medium through the constructs was capable of augmenting the differentiation process. Human BMSCs were isolated from bone marrow aspirates and were characterized by flow cytometry. After expansion, hBM-MSCs were seeded statically onto fibre mesh scaffolds, consisting of a blend of 50:50 chitosan:poly(butylene terephthalate adipate) (CPBTA). Constructs were cultured in a flow-perfusion bioreactor for 28 days, using complete medium for chondrogenesis supplemented by TGFβ3. An enhanced ECM deposition and collagen type II production was observed in the bioreactor samples when compared to the static controls. Moreover, it was observed that hBM-MSCs, in static cultures, take longer to differentiate. ECM accumulation in these samples is lower than in the bioreactor sections, and there is a significant difference in the expression of collagen type I. We found that the flow-induced shear stress has a beneficial effect on the chondrogenic differentiation of hMSCs.

Cartilage tissue engineering using electrospun PCL nanofiber meshes and MSCs

Mesenchymal stem cells (MSCs) have been recognized for their ability to differentiate into cells of different tissues such as bone, cartilage, or adipose tissue, and therefore are of great interest for potential therapeutic strategies. Adherent, colony-forming, fibroblastic cells were isolated from human bone marrow aspirates, from patients undergoing knee arthroplasties, and the MSCs phenotype characterized by flow cytometry. Afterward, cells were seeded onto electrospun polycaprolactone nanofiber meshes and cultured in a multichamber flow perfusion bioreactor to determine their ability to produce cartilagineous extracellular matrix. Results indicate that the flow perfusion bioreactor increased the chondrogenic differentiation of hBM-MSCs, as confirmed either by morphological and RT-PCR analysis. Cartilage-related genes such as aggrecan, collagen type II, and Sox9 were expressed. ECM deposition was also detected by histological procedures. Collagen type II was present in the samples, as well as collagen type I. Despite no statistically significant values being obtained for gene expression, the other results support the choice of the bioreactor for this type of culture.

Biodegradable nanomats produced by electrospinning: expanding multifunctionality and potential for tissue engineering

With increasing interest in nanotechnology, development of nanofibers (n-fibers) by using the technique of electrospinning is gaining new momentum. Among important potential applications of n-fiber-based structures, scaffolds for tissue-engineering represent an advancing front. Nanoscaffolds (n-scaffolds) are closer to natural extracellular matrix (ECM) and its nanoscale fibrous structure. Although the technique of electrospinning is relatively old, various improvements have been made in the last decades to explore the spinning of submicron fibers from biodegradable polymers and to develop also multifunctional drug-releasing and bioactive scaffolds. Various factors can affect the properties of resulting nanostructures that can be classified into three main categories, namely: (1) Substrate related, (2) Apparatus related, and (3) Environment related factors. Developed n-scaffolds were tested for their cytocompatibility using different cell models and were seeded with cells for to develop tissue engineering constructs. Most importantly, studies have looked at the potential of using n-scaffolds for the development of blood vessels. There is a large area ahead for further applications and development of the field. For instance, multifunctional scaffolds that can be used as controlled delivery system do have a potential and have yet to be investigated for engineering of various tissues. So far, in vivo data on n-scaffolds are scarce, but in future reports are expected to emerge. With the convergence of the fields of nanotechnology, drug release and tissue engineering, new solutions could be found for the current limitations of tissue engineering scaffolds, which may enhance their functionality upon in vivo implantation. In this paper electrospinning process, factors affecting it, used polymers, developed n-scaffolds and their characterization are reviewed with focus on application in tissue engineering.

Entrapment ability and release profile of corticosteroids from starch-based microparticles

We previously described the synthesis of starch-based microparticles that were shown to be bioactive (when combined with Bioactive Glass 45S5) and noncytotoxic. To further assess their potential for biomedical applications such as controlled release, three corticosteroids with a similar basic structure-dexamethasone (DEX), 16alpha-methylprednisonole (MP), and 16alpha-methylprednisolone acetate (MPA)-were used as models for the entrapment and release of bioactive agents. DEX, MP, and MPA were entrapped into starch-based microparticles at 10% wt/wt of the starch-based polymer and the loading efficiencies, as well as the release profiles, were evaluated. Differences were found for the loading efficiencies of the three corticosteroids, with DEX and MPA being the most successfully loaded (82 and 84%, respectively), followed by MP (51%). These differences might be explained based on the differential distribution of the molecules within the matrix of the microparticles. Furthermore, a differential burst release was observed in the first 24 h for all corticosteroids with DEX and MP being more pronounced (around 25%), whereas only 12% of MPA was released during the same time period. Whereas the water uptake profile can account for this first stage burst release, the subsequent slower release stage was mainly attributed to degradation of the microparticle network. Differences in the release profiles can be explained based on the structure of the molecule, because MPA, a more bulky and hydrophobic molecule, is released at a slower rate compared with DEX and MP. In this work, it is shown that these carriers were able to sustain a controlled release of the entrapped corticosteroids over 30 days, which confirms the potential of these systems to be used as carriers for the delivery of bioactive agents.

Epidemiological aspects of toxoplasmosis in schoolchildren residing in localities with urban or rural characteristics within the city of Rio de Janeiro, Brazil

Immunofluorescence tests (IF) for toxoplasmosis were performed on a total of 608 schoolchildren in elementary and junior high grades. 166 being in the Bonsucesso district (an urban region of Rio de Janeiro) and 442 children from locations within the lowlands of Jacarepaguá (with rural characteristics). All the IF-IgM were nonreactive, whilst 416 schoolchildren (68.4%) were IF-IgG serum-reactive (greater than or equal to 1:16). The percentages of serum-reactives in Jacarepaguá were significantly higher than in Bonsucesso, both as regards the total number of schoolchildren (p less than 0.001), as also when subdivided according to the age-grades from six to eight years (p less than 0.001) or from twelve to fourteen (p less than 0.05). Both in Jacarepaguá and in Bonsucesso, the prevalence of reactions in the 12 to 14 year age-grade was significantly greater than in the 6 to 8 year age-grade (p less than 0.001 in both cases). Expressively larger prevalences of serum reactions were found in Jacarepaguá among schoolchildren who preferred eating raw or undercooked meat, as well as among those having cats as pets; this occurred equally in the 6 to 8 year and in the 12 to 14 year age-grades. In Bonsucesso, the only significant difference was in the 6 to 8 year age-grades that had cats as pets. Thus, it has been verified that the risk of infection is greater and more precocious in localities with rural characteristics than in urban regions.