A micro-transducer matrix design for the detection of flexural guided waves

In this paper, a new approach is proposed for the detection of ultrasonic guided waves using a LiNbO₃ single crystal-based micro-transducer matrix. This matrix was designed, manufactured, and then used to detect Lamb and Pochhammer-Chree guided waves in plate- and cylinder-like structures. This study highlights the identification of the first flexural mode F(1,1) in cylinders at low frequencies. A network analyser and a laser Doppler vibrometer (LDV) were used to characterise and study the behaviour of the micro-transducer matrix. An experimental device was designed and used to acquire electrical measurements of the micro-transducer vibrations. Then, an original experimental device was developed to generate a selected flexural guided mode in a solid aluminium cylinder. The emitter comprised two semicircular piezoelectric transducers excited with only one phased signal thanks to the inverse position of polarisation. Finally, the results prove that the flexural mode F(1,1) is selected and generated by the emitter, then detected and identified by the micro-transducer matrix.

Pump-probe localization technique of varying solid contacts

A baseline-free defect localization method in thin plates is proposed and tested. In this proof-of-concept work, a steel ball pressed against an aluminum plate is used to mimic a surface contact defect. The technique takes benefit of a repetitive nonlinear pump-probe interaction with a backpropagation imaging algorithm. High-frequency probe waves are periodically emitted by a piezoelectric patch transducer glued to the plate. Propagated flexural waves are recorded using a distributed array of transducers. At the same time, a continuous low-frequency pump vibration provided by a shaker fixed to the plate modulates the contact state. By combining multiple probe signals, the contact can be successfully localized. Contrast of the localization images is finally improved by a factor of 3 to 5 by implementing a modified version based on synchronous detection of the imaging algorithm.

Local damage detection by nonlinear coda wave interferometry combined with time reversal

Coda wave interferometry (CWI) is a sensitive ultrasound method for the detection of weak and local changes in complex inhomogeneous media. In a nonlinear modification of the method discussed here, a high-frequency probe coda is compared to its replica obtained in the presence of low-frequency pumping. If, after the filtering-out of low frequencies, the coda signals are different, this is attributed to nonlinear pump-probe interaction induced by contact acoustical nonlinearity in the damaged zone. Actually, the CWI methods are used for global inspection of complex media, such as for example, concrete structures. In this work, a step forward is made; it consists in combining the CWI with the time-reversal (TR) technique in order to allow one to focus the pump wave on a selected area in the structure and to detect and localize a flaw. Time-reverse pump is possible only in pulsed mode due to the spatio-temporal wave compression. By this reason, the particularities of coda wave mixing in conventionally used continuous and pulsed pump mode are considered. It has been experimentally observed that an aftereffect of a pulsed pump provides a nonlinear interaction between pump and probe waves of a sufficient overall level for defect detection with TR. Finally, it was shown that a TR focusing even with the minimal available quality i.e., with only one transducer produces a sufficient contrast allowing to distinguish intact and damaged zones with nonlinear CWI.

An autonomous low-power management system for energy harvesting from a miniaturized spherical piezoelectric transducer

A new spherical vibrational energy harvesting device with an additional low power management circuit for optimizing the power transfer from the mechanical vibrations to a storage capacitor is presented. The device is devoted to underwater wireless sensor network applications due to its broadband vibrational energy harvesting, sensing, and communicating facilities. The sensing node container consists of two acrylic glass (PMMA) half-spherical shells and a Pz26 piezoelectric ring clamped between the shells. The energy harvesting, the management circuit, and communication electronics were fitted within the hollow portion of the sphere. A simulation model of the energy extraction and management system using spice has been developed. This simulation shows the feasibility and efficiency of the low power extraction circuit; a level of the necessary stored voltage was set at 3 V. The numerical model was validated by underwater experimental measurements; a voltage of 3 V was obtained at the terminals of a storage capacitor (47 µF) which was sufficient to supply the communication electronics. Power harvesting performances were measured relative to the transmitter/sensor distance and the incident acoustical field excitation voltage. Finally, 175 µW of harvested power has been measured with an excitation voltage of 8 Vpp at 5 cm distance from the emitter.