A Novel Approach to Differentiating Erosive and Reticular Lichen Planus Based on the Percentage of Dental Surfaces With Metal Restorations

Introduction Oral lichen planus (OLP) and oral lichenoid reaction (OLR) constitute clinical entities with strong but unclear etiologic relation to dental materials. The aim of this study was to evaluate a correlation between the clinical form of OLP/OLR and the number of dental metal restorations in the oral cavity thus utilizing an exposure to metal (EM) index.  Material and methods The study type is experimental, and the study design is characterized as semiquantitative research that belongs to the branch of experimental research. Twenty-nine patients were chosen based on clinical (either reticular or erosive clinical forms) and histologic findings suggestive of OLP/OLR. The files of patients were retrieved from the archives of the Department of Oral Medicine/Pathology, School of Dentistry, Aristotle University of Thessaloniki, Greece, during the period 2009-2019. The medical history of the patients did not include any disorder or medication associated with lichenoid lesions and the measurements took place concurrently with the establishment of the diagnosis, thus no treatment for the lichen planus had been administered prior to the measurements. Quantitative measurement of the percentage of dental surfaces restored through metal restorations and correlation with the clinical and histologic findings of OLP/OLR was evaluated. The EM index was evaluated on a scale of 1-3, which corresponds to the percentage of dental surfaces restored through metal restorations. The statistical analysis was performed with the Pearson chi-square test and the significance level was set at p≤0.05. Results The EM index was measured by dividing each tooth into five surfaces (occlusal, mesial, distal, buccal, lingual), subsequently multiplying the number of available teeth with the number 5 to calculate the total number of surfaces, and then counting the number of surfaces with metal restorations - both fillings and crowns (in case of metal-ceramic crowns, the respective dental surface is taken into account only in case of macroscopically exposed metal), dividing the number of surfaces with metal restorations with the total number of surfaces and multiply by 100 so that the results take the form of percentages (%) and finally classifying the percentages into three groups: 1: 0% metal restorations, 2: 1-25% metal restorations, 3: >26% metal restorations). The percentage in female patients ranged from 0% to 100%, whereas it ranged from 0% to 60% in male patients. According to the clinical form of the lichenoid lesion, the percentage ranged from 0% to 60% in reticular lichen planus cases and from 0% to 100% in erosive lichen planus cases. There was no statistical difference between lichen planus cases, in total, and in normal oral epithelium. However, the levels of EM were marginally similar between the reticular lichen planus and the erosive lichen planus (Fisher's exact test, p = 0.056). Therefore, it may be the case that the EM index is higher in erosive lichenoid lesions. Conclusion In our study, the EM index was higher in female patients and in erosive lichenoid lesions. These findings should be tested and supported by larger samples of patients since the aforementioned Fisher's Exact Test, p = 0.056 could fall below the threshold of 0.05 if more patients were included. This is the first attempt to establish a novel approach to differentiating erosive and reticular lichen planus based on the percentage of dental surfaces with metal restorations.

Cancer Stem Cells' Biomarker ALDH1&2 Increased Expression in Erosive Oral Lichen Planus Compared to Oral Leukoplakia

INTRODUCTION

ALDH1&2 has been considered an oral cancer stem cell (CSC) marker. Oral carcinogenesis is a process that usually passes through oral potentially malignant disorders (OPMD). Oral lichen planus (OLP) consists of immune-related chronic disorders that have been included in the OPMDs due to their possible transformation into oral cancer. The aim of this study was to investigate the early presence of ALDH1&2 in OLP compared to early oral leukoplakias (OL), especially mildly and non-dysplastic OL.

MATERIALS AND METHODS

The study type is experimental, and the study design is characterized as semiquantitative research which belongs to the branch of experimental research. The study sample consisted of paraffin-embedded OLP biopsy samples from the archives of the Department of Oral Medicine/Pathology, School of Dentistry, Aristotle University of Thessaloniki, Greece, during the period 2009-2019. The study sample contained 24 cases of OLP (14 erosive and 10 reticular) and 30 cases of OL (16 cases of moderately and severely dysplastic OL and 14 cases of mildly and non-dysplastic OL). The CSC-related biomarker ALDH1&2 was examined using semiquantitative immunohistochemistry (monoclonal antibody sc-166362, Santa Cruz Biotechnology, Dallas, Texas, USA, 1:100). ALDH1&2 expression was evaluated through a scale of 1 to 3 depending on the percentage of positive epithelial cells and was compared to normal epithelium as well as cases of OL (the most prominent OPMD). The statistical analysis was performed with the Pearson chi-square test and the significance level was set at p≤0.05.

RESULTS

The cytoplasmic staining of ALDH1&2 was observed mostly in the epithelial cells of the basal layer of the epithelium of OLP. Overall, this expression was significantly increased compared to normal epithelium. In addition, statistically significantly higher expression of ALDH1&2 was observed in the erosive form of OLP. Interestingly, this OLP positivity was higher compared to mild and non-dysplastic leukoplakias (p<0.001).

CONCLUSIONS

ALDH1&2 is a confirmed CSC marker that was found to be clearly increased in OLP and characteristically in erosive OLP epithelium for the first time. Noteworthy, it was more prominent in erosive OLP rather than in mildly and non-dysplastic OL. Whether this pattern of expression raises the red flag of an early epithelial "CSC" phenotype in OLP or that ALDH1&2 expression indicates a response to the OLP inflammatory process requires further investigation.

Impact of different types of dental prostheses on oral-health-related quality of life: a prospective bicenter study of definitive and interim restorations

PURPOSE

To assess the impact of different types of dental prostheses, including definitive and interim restorations, on oral health-related quality of life (OHRQoL) before and after prosthetic treatment.

MATERIALS AND METHODS

A total of 151 patients received prosthetic treatment at one of two German departments of prosthetic dentistry. The patients' OHRQoL was assessed using the German version of the Oral Health Impact Profile (OHIP-G53) at baseline (T0) and at 1 week (T1) and 3 months (T2) after treatment. Patients were divided into 10 subgroups according to their pre- and posttreatment status. The effect of the type (no prosthesis; fixed prosthesis; removable prosthesis) and duration of wear (definitive; interim) of the restorations was evaluated. Results were analyzed using Kolmogorov-Smirnov, Kruskal-Wallis, and Mann-Whitney U tests with a significance level of P = .05.

RESULTS

The highest OHRQoL was recorded for patients with fixed restorations, as indicated by the fact that their OHIP scores were lowest. A significant improvement in OHRQoL (P ≤ .034) was observed for patients who needed prostheses and were then treated with removable or fixed restorations. The OHIP score was affected by a change in restoration type. Rehabilitation with definitive prostheses had a significant effect on posttreatment OHRQoL (P ≤ .006).

CONCLUSION

In general, prosthetic rehabilitation by use of fixed or removable prostheses resulted in an improvement in OHRQoL. The use of the same type of restoration before and after treatment had a positive effect on OHRQoL. If possible, a change of restoration type should be avoided. For patients who require permanent prostheses, the use of fixed and removable restorations is recommended. For oral rehabilitation, fixed restorations should be preferred in order to achieve best possible improvement of OHIP score.

Are researchers paying too much for attending dental meetings?

Dental meetings are important venues for sharing knowledge and experiences among researchers and clinicians. The costs for participating in such events, however, are high and have increased over the years. This opinion paper discusses the fairness of such a policy, with high costs for researchers presenting their findings, as well as some suggestions to reduce the economic burden of participants actively involved in presenting their research findings.

Co-contraction behaviour of masticatory and neck muscles during tooth grinding

The objective of this study was to analyse the co-contraction behaviour of jaw and neck muscles during force-controlled experimental grinding in the supine position. Twelve symptom-free subjects were enrolled in the experimental study. Electromyographic (EMG) activity of semispinalis capitis, splenius capitis and levator scapulae muscles was recorded bilaterally with intramuscular fine-wire electrodes, whereas that of sternocleidomastoideus, infrahyoidal, suprahyoidal, masseter and anterior temporalis muscles were registered with surface electrodes. EMG and force measurements were performed during tasks simulating tooth grinding on custom-made intraoral metal splints. The mean EMG activity normalised by maximum voluntary contraction (% MVC) of each of the neck muscles studied during grinding was analysed and compared with previous data from jaw clenching at identical force (100 N) and (supine) position. The occurrence of low-level, long-lasting tonic activation (LLTA) of motor units was also documented. The mean three-dimensional force vector of the grinding forces was 106 ± 74 N. In the frontal plane, the incline to the midsagittal plane ranged between 10° and 15°. In the midsagittal plane, the incline to the frontal plane was negligibly small. Posterior neck muscle activity during grinding ranged between 4.5% and 12% MVC and during clenching with 100 N between 1.8% and 9.9% MVC. Masticatory muscle activity during grinding ranged between 17% and 21% MVC for contralateral masseter and ipsilateral temporalis and between 4% and 6.5% for ipsilateral masseter and contralateral temporalis. LLTA had an average duration of 195 ± 10 seconds. The findings from this study do not support pathophysiological muscle chain theories postulating simple biomechanical coupling of neck and jaw muscles. Co-contractions of neck and masticatory muscles may instead occur as a result of complex neurophysiological interactions.

Comparison of three different options for immediate treatment of painful temporomandibular disorders: a randomized, controlled pilot trial

OBJECTIVE

The purpose of this study was to compare the short-term effectiveness of three different types of immediate, non-pharmacological intervention for alleviation of the painful symptoms of temporomandibular disorders (TMD).

MATERIAL AND METHODS

Thirty-six patients (mean age 41.6 ± 16.7 years, 25 females) diagnosed with non-dysfunctional painful TMD received counselling and subsequently were randomly allocated to three treatment groups: patients in Group A received prefabricated oral splints with water-filled elastic pads (Aqualizer(®)), those in Group B were provided with vacuum-formed co-polyester oral splints and those in Group C were given appointments to receive Michigan-type hard splints. Clinical examination was conducted, at baseline and after 2 weeks, by use of the RDC/TMD. Current pain intensity was determined by evaluation of graded chronic pain status (GCPS) on a numerical rating scale (NRS). Active maximum mouth opening without pain (AMMOP) was also measured. Paired sample t-tests and one-way analysis of variance with a significance level of p ≤ 0.05 were conducted.

RESULTS

After 2 weeks, overall mean current pain was reduced by 41.95% (p < 0.001). Current pain reduction was significant for Group B (66.6%, p < 0.001) but not for Groups A (37.88%, p = 0.56) and C (22.29%, p = 0.26). After 2 weeks, current pain level for Group B was significantly lower than that for Group C (p = 0.041). Overall, there was a statistically significant increase of AMMOP (p = 0.01).

CONCLUSION

All therapeutic options were pain-reducing. The results from this study suggest that cost-effective and time-effective intervention of counselling combined with use of a vacuum-formed splint is a favourable option for initial, short-term treatment of painful TMD.

Small vertical changes in jaw relation affect motor unit recruitment in the masseter

Strategies for recruitment of masseter muscle motor units (MUs), provoked by constant bite force, for different vertical jaw relations have not previously been investigated. The objective of this study was to analyse the effect of small changes in vertical jaw relation on MU recruitment behaviour in different regions of the masseter during feedback-controlled submaximum biting tasks. Twenty healthy subjects (mean age: 24·6 ± 2·4 years) were involved in the investigation. Intra-muscular electromyographic (EMG) activity of the right masseter was recorded in different regions of the muscle. MUs were identified by the use of decomposition software, and root-mean-square (RMS) values were calculated for each experimental condition. Six hundred and eleven decomposed MUs with significantly (P < 0·001) different jaw relation-specific recruitment behaviour were organised into localised MU task groups. MUs with different task specificity in seven examined tasks were observed. The RMS EMG values obtained from the different recording sites were also significantly (P < 0·01) different between tasks. Overall MU recruitment was significantly (P < 0·05) greater in the deep masseter than in the superficial muscle. The number of recruited MUs and the RMS EMG values decreased significantly (P < 0·01) with increasing jaw separation. This investigation revealed differential MU recruitment behaviour in discrete subvolumes of the masseter in response to small changes in vertical jaw relations. These fine-motor skills might be responsible for its excellent functional adaptability and might also explain the successful management of temporomandibular disorder patients by somatic intervention, in particular by the use of oral splints.

Static balancing behaviour of the mandible

The objective of this study was to investigate the mechanisms of physiological control of the craniomandibular system during force-controlled biting: in intercuspation, restricted by predetermined anatomic-geometrical conditions [i.e. biting in intercuspation (BIC)]; and on a hydrostatic system [i.e. auto-balanced static equilibrium of the mandible (BAL)], in which the mandible is balanced under unrestricted occlusal conditions. For 20 healthy subjects, the spatial positions of the condyles, the lower molars, and the incisal point were measured, and the electromyographic (EMG) activity of the musculus masseter and musculus temporalis anterior were recorded bilaterally, during force-controlled biting (50, 75, 100 N) on a hydrostatic device. The results were compared with those obtained during BIC. During BAL, the neuromuscular system stabilizes one condyle, so it behaves as a virtual fulcrum, and all available biomechanical degrees of freedom of the opposite side are used to achieve a bilaterally equal vertical distance between the upper and lower dental arches. The variability of the positions of the molars was significantly smaller than for the condyles. The EMG co-contraction ratios calculated for homonymous muscle regions revealed significant differences between BIC and BAL, specifically, greater symmetry during BAL with substantial asymmetry of approximately 25% remaining. In conclusion, the results revealed precise neuromuscular control of the position of the lower dental arch; this information might form the basis for interference-free tracking of the mandible in intercuspation under different conditions.

Precision of jaw-closing movements for different jaw gaps

Jaw-closing movements are basic components of physiological motor actions precisely achieving intercuspation without significant interference. The main purpose of this study was to test the hypothesis that, despite an imperfect intercuspal position, the precision of jaw-closing movements fluctuates within the range of physiological closing movements indispensable for meeting intercuspation without significant interference. For 35 healthy subjects, condylar and incisal point positions for fast and slow jaw-closing, interrupted at different jaw gaps by the use of frontal occlusal plateaus, were compared with uninterrupted physiological jaw closing, with identical jaw gaps, using a telemetric system for measuring jaw position. Examiner-guided centric relation served as a clinically relevant reference position. For jaw gaps ≤4 mm, no significant horizontal or vertical displacement differences were observed for the incisal or condylar points among physiological, fast, and slow jaw-closing. However, the jaw positions under these three closing conditions differed significantly from guided centric relation for nearly all experimental jaw gaps. The findings provide evidence of stringent neuromuscular control of jaw-closing movements in the vicinity of intercuspation. These results might be of clinical relevance to occlusal intervention with different objectives.

Co-activation of jaw and neck muscles during submaximum clenching in the supine position

OBJECTIVE

The purpose of this study was to test the hypothesis that jaw clenching induces co-contraction and low-level long-lasting tonic activation (LLTA) of neck muscles in the supine position.

DESIGN

Ten healthy subjects developed various feedback-controlled submaximum bite forces in different bite-force directions in supine position. The electromyographic (EMG) activity of the semispinalis capitis, semispinalis cervicis, multifidi, splenius capitis, levator scapulae, trapezius, sternocleidomastoideus, masseter and infra/supra-hyoidal muscles was recorded. For normalization of EMG data, maximum-effort tasks of the neck muscles were performed.

RESULTS

Co-contractions of the posterior neck muscles varied between 2% and 11% of their maximum voluntary contraction. Different bite forces and bite-force directions resulted in significant (p<.05) activity differences between the co-contraction levels of the neck muscles. In addition, LLTA of specific neck muscles, provoked by the jaw clenching tasks, was observed.

CONCLUSIONS

This study demonstrated for the first time moderate co-contractions of jaw and neck muscles in the supine position under controlled submaximum jaw clenching forces. LLTA of most neck muscles was observed, outlasting clenching episodes and indicating an additional neuromuscular interaction between the two muscle groups.

Reporting adverse events in randomized controlled trials in periodontology: a systematic review

BACKGROUND/AIMS

Reporting of adverse events is of paramount importance in randomized controlled trials (RCTs) to guide the implementation of new therapeutic approaches in clinical practice. The aim of this study was to assess the quality of adverse events reporting in RCTs published in the periodontal literature.

MATERIALS AND METHODS

Two authors (CMF and NNG) searched the PubMed and LILACS electronic databases independently and in duplicate to identify RCTs published in periodontology from 2002 to 2003 and from 2011 to 2012. Reporting quality in RCTs was assessed with reference to the 2004 CONSORT Extension for Harms checklist. Differences in adverse events reporting between industry- and non-industry-funded RCTs were also determined. Cohen's kappa statistic was used to determine the extent of inter-reviewer agreement. Fischer's exact test was used to assess differences in reporting between the two samples.

RESULTS

The analysis included 246 publications. One hundred twenty-four of 990 (13%) items and 223 of 1460 (15%) items were adequately reported in publications from 2002 to 2003 and from 2011 to 2012 respectively. Three checklist topics were significantly better reported in the 2011-2012 sample; two recommendations were better reported in non-industry-funded trials in publications from both periods.

CONCLUSION

Improvement and standardization of adverse events reporting in periodontology are needed.

Temporomandibular joint (TMJ) disc position in patients with TMJ pain assessed by coronal MRI

OBJECTIVES

To assess the position of the temporomandibular joint (TMJ) disc in patients with TMJ pain and compare it with equivalent published data of asymptomatic volunteers.

METHODS

The oblique coronal closed- and open-jaw MR images from 66 patients with TMJ pain were evaluated. Clinical examination followed the research diagnostic criteria for temporomandibular disorders. In all coronal images, the transverse condylar axis and the medial and lateral edges of the disc were determined using special software. Inter-rater agreement was calculated [two raters; inter-rater correlation coefficient (ICC)]. The presence of osteoarthrosis (OA) was determined by two independent raters. The influence of OA was estimated in patients (generalized estimation equation model). The results were compared with those of healthy volunteers (t-test). Differences between closed and open jaw in patients were analysed with the Wilcoxon matched-pair test.

RESULTS

The ICC was good for the transverse condylar axis (0.987) and the medial edge of the disc (0.799) and fair for the lateral edge (0.355). On average, the disc projected 5.5% to the medial side; laterally, the condyle was partially uncovered by the disc (-16.6%). In the open-jaw position, both the medial and the lateral edges shifted medially (to 17.6% vs -23.6%, Wilcoxon matched-pair test, p < 0.001). OA had no significant influence (generalized estimation equation model, p = 0.952). The disc position differed significantly from asymptomatic individuals (t-test, p < 0.001) who showed a medial disc position and full coverage of the condyle.

CONCLUSIONS

In patients with TMJ pain, the disc seems to be smaller and located less medially than in healthy volunteers. The extent of the medial shift on opening was similar.

Comparison of particle-size distributions determined by optical scanning and by sieving in the assessment of masticatory performance

Aim of this study was to introduce a feasible and valid technique for the assessment of masticatory performance that is comparable to the standard sieving method. Twenty-one chewing samples (Optosil) comminuted by healthy dentate adults were analysed with a sieving and scanning method. Scanning was performed using a conventional flatbed scanner (1200dpi). All scanned images underwent image analysis (ImageJ), which yielded descriptive parameters such as area, best-fitting ellipse for each particle. Of the 2D-image, a volume was estimated for each particle, which was converted into a weight. To receive a discrete distribution of particle sizes comparable to sieving, five chewing samples were used to calculate a size-dependent area-volume-conversion factor. The sieving procedure was carried out with a stack of 10 sieves, and the retained particles per sieve were weighed. The cumulated weights yielded by either method were curve-fitted with the Rosin-Rammler distribution to determine the median particle size x(50) . The Rosin-Rammler distributions for sieving and scanning resemble each other. The distributions show a high correlation (0·919-1·0, n= 21, P<0·01, Pearson's correlation coefficient). The median particle sizes vary between 3·83 and 4·77mm (mean: 4·31) for scanning and 3·53 and 4·55mm (mean: 4·21) for sieving. On average, scanning overestimates the x(50) values by 2·4%. A modified Bland-Altman plot reveals that 95% of the x(50) values fall within 10% of the average x(50) . The scanning method is a valid, simple and feasible method to determine masticatory performance.

The methodological quality of systematic reviews of animal studies in dentistry

Systematic reviews and meta-analyses of animal studies are important for improving estimates of the effects of treatment and for guiding future clinical studies on humans. The purpose of this systematic review was to assess the methodological quality of systematic reviews and meta-analyses of animal studies in dentistry through using a validated checklist. A literature search was conducted independently and in duplicate in the PubMed and LILACS databases. References in selected systematic reviews were assessed to identify other studies not captured by the electronic searches. The methodological quality of studies was assessed independently and in duplicate by using the AMSTAR checklist; the quality was scored as low, moderate, or high. The reviewers were calibrated before the assessment and agreement between them was assessed using Cohen's Kappa statistic. Of 444 studies retrieved, 54 systematic reviews were selected after full-text assessment. Agreement between the reviewers was regarded as excellent. Only two studies were scored as high quality; 17 and 35 studies were scored as medium and low quality, respectively. There is room for improvement of the methodological quality of systematic reviews of animal studies in dentistry. Checklists, such as AMSTAR, can guide researchers in planning and executing systematic reviews and meta-analyses. For determining the need for additional investigations in animals and in order to provide good data for potential application in human, such reviews should be based on animal experiments performed according to sound methodological principles.

Analysis of quality and feasibility of an objective structured clinical examination (OSCE) in preclinical dental education

INTRODUCTION

An objective structured clinical examination (OSCE) has been implemented in preclinical dentistry. It was taken at an early stage (propaedeutics course). The objectives of this study were to evaluate the reliability, validity, and feasibility of the examination, and the effect of circuit number on OSCE score.

METHODS

The OSCE was designed by an expert committee on the basis of pre-reviewed blueprints and checklists. Eleven stations formed an interdisciplinary circuit. Six groups of students (n = 62) passed sequentially round the same circuit. Statistical analysis was performed by using SPSS. Reliability was determined by measurement of internal consistency (Cronbach's α, Guttman's λ(2) ), standard error of measurement (SEM) (comprising generalisability index α, dependability index ϕ and pass 150;fail reliability p(c) ), consistency coefficient κ, item 150;scale correlation (Pearson correlation), and, because the unidimensionality of the stations could not be assumed, factor analysis including varimax rotation. Convergent validity (Pearson correlation, t-test), and predictive validity for future preclinical courses and the final preclinical examination were assessed by analysis of variance (ANOVA). The effect of the circuit number on score improvement was calculated, including a correction for the general competence of the students (ANOVA). Cost was calculated on the basis of the time invested.

RESULTS

Fifty-three out of sixty-two students passed the OSCE (mean score: 67%, SD 7.7, range, 47-81). Scores for each station correlated significantly with total scores (r = 0.35-0.54, P < 0.01). For internal consistency, α = 0.75 (relative SEM 3.8) and λ(2) = 0.766. The dependability index was ϕ = 0.694 (absolute SEM 4.4), p(c) = 0.89 and κ = 0.61. Factor analysis yielded two components: dental-materials-oriented stations and all other stations (explained variance 43%). Scores correlated significantly with success in passing practical tests (i.e. performing dental procedures under examination conditions) (known group validity, P < 0.01) and with scores for subsequent courses and the final preclinical examination (Physikum) (predictive validity, P < 0.001). Later groups performed 4% better on average (CI 95%: 1.2-6.8%; P < 0.01). The cost was 181 Euro per student.

CONCLUSIONS

The OSCE is reliable and valid in the context of preclinical dentistry. The cost is substantial. The problem of improvement of students' results with ascending circuit number has to be addressed.