Imaging and characterization of optical emission fromex vivotissue during conventional and UHDR PBS proton therapy

Objective. Imaging of optical photons emitted from tissue during radiotherapy is a promising technique for real-time visualization of treatment delivery, offering applications in dose verification, treatment monitoring, and retrospective treatment plan comparison. This research aims to explore the feasibility of intensified imaging of tissue luminescence during proton therapy (PT), under both conventional and ultra-high dose rate (UHDR) conditions.Approach. Conventional and UHDR pencil beam scanning (PBS) PT irradiation of freshex vivoporcine tissue and tissue-mimicking plastic phantom was imaged using intensified complementary metal-oxide-semiconductor(CMOS) cameras. The optical emission from tissue was characterized during conventional irradiation using both blue and red-sensitive intensifiers to ensure adequate spectral coverage. Spectral characterization was performed using bandpass filters between the lens and sensor. Imaging of conventional proton fields (240 MeV, 10 nA) was performed at 100 Hz frame rate, while UHDR PBS proton delivery (250 MeV, 99 nA) was recorded at 1 kHz frame rate. Dependence of optical emission yield on proton energy was studied using an optical tissue-mimicking plastic phantom and a range shifter. Finally, we demonstrated fast beam tracking capability of fast camera towardsin vivomonitoring of FLASH PT.Main results. Under conventional treatment dose rates optical emission was imaged with single spot resolution. Spot profiles were found to agree with the treatment planning system calculation within >90% for all spectral bands and spot intensity was found to vary with spectral filtration. The resultant polychromatic emission presented a maximum intensity at 650 nm and decreasing signal at lower wavelengths, which is consistent with expected attenuation patterns of high fat and muscle tissue. For UHDR beam imaging, optical yield increased with higher proton energy. Imaging at 1 kHz allowed continuous monitoring of delivery during porcine tissue irradiation, with clear identification of individual dwell positions. The number of dwell positions matched the treatment plan in total and per row showing adequate temporal capability of iCMOS imaging.Significance. For the first time, this study characterizes optical emission from tissue during PT and demonstrates our capability of fast optical tracking of pencil proton beam on the tissue anatomy in both conventional and UHDR setting. Similar to the Cherenkov imaging in radiotherapy, this imaging modality could enable a seamless, independent validation of PT treatments.

Feasibility of 4D HDR brachytherapy source tracking using x-ray tomosynthesis: Monte Carlo investigation

PURPOSE

High dose rate (HDR) brachytherapy rapidly delivers dose to targets with steep dose gradients. This treatment method must adhere to prescribed treatment plans with high spatiotemporal accuracy and precision, as failure to do so may degrade clinical outcomes. One approach to achieving this goal is to develop imaging techniques to track HDR sources in vivo in reference to surrounding anatomy. This work investigates the feasibility of using an isocentric C-arm x-ray imager and tomosynthesis methods to track Ir-192 HDR brachytherapy sources in vivo over time (4D).

METHODS

A tomosynthesis imaging workflow was proposed and its achievable source detectability, localization accuracy, and spatiotemporal resolution were investigated in silico. An anthropomorphic female XCAT phantom was modified to include a vaginal cylinder applicator and Ir-192 HDR source (0.5 × 0.5 × 5.0 mm3 ), and the workflow was carried out using the MC-GPU Monte Carlo image simulation platform. Source detectability was characterized using the reconstructed source signal-difference-to-noise-ratio (SDNR), localization accuracy by the absolute 3D error in its measured centroid location, and spatiotemporal resolution by the full-width-at-half-maximum (FWHM) of line profiles through the source in each spatial dimension considering a maximum C-arm angular velocity of 30° per second. The dependence of these parameters on acquisition angular range (θtot = 0°-90°), number of views, angular increment between views (Δθ = 0°-15°), and volumetric constraints imposed in reconstruction was evaluated. Organ voxel doses were tallied to derive the workflow's attributable effective dose.

RESULTS

The HDR source was readily detected and its centroid was accurately localized with the proposed workflow and method (SDNR: 10-40, 3D error: 0-0.144 mm). Tradeoffs were demonstrated for various combinations of image acquisition parameters; namely, increasing the tomosynthesis acquisition angular range improved resolution in the depth-encoded direction, for example from 2.5 mm to 1.2 mm between θtot = 30o and θtot = 90o , at the cost of increasing acquisition time from 1 to 3 s. The best-performing acquisition parameters (θtot = 90o , Δθ = 1°) yielded no centroid localization error, and achieved submillimeter source resolution (0.57 × 1.21 × 5.04 mm3 apparent source dimensions, FWHM). The total effective dose for the workflow was 263 µSv for its required pre-treatment imaging component and 7.59 µSv per mid-treatment acquisition thereafter, which is comparable to common diagnostic radiology exams.

CONCLUSIONS

A system and method for tracking HDR brachytherapy sources in vivo using C-arm tomosynthesis was proposed and its performance investigated in silico. Tradeoffs in source conspicuity, localization accuracy, spatiotemporal resolution, and dose were determined. The results suggest this approach is feasible for localizing an Ir-192 HDR source in vivo with submillimeter spatial resolution, 1-3 second temporal resolution and minimal additional dose burden.