[Determination of cobalt and tungsten in human urine by inductively coupled plasma mass spectrometry]

Objective: To establish a inductively coupled plasma mass spectrometry method for the determination of trace cobalt and tungsten in human urine. Methods: The authors used 1% nitric acid solution as diluent in October-December 2021, the sample dilution factor and internal standard element were optimized by single factor rotation experiment, and the difference between the working curve and the standard curve was compared. Results: The method uses working curve to determine cobalt and tungsten in urine, the linear range of this method was 0.0~10.0 μg/L, the correlation coefficient was 0.999 9, the detection limits respectively were 0.005 μg/L (cobalt) and 0.09 μg/L (tungsten), the recoveries of samples respectively were 87.0%~100.2% (cobalt) and 89.4%~104.8% (tungsten), the relative standard deviations respectively were 0.4%~4.4% (cobalt) and 0.6%~3.8% (tungsten) . Conclusion: A simple and rapid method for determination of cobalt and tungsten in urine has been established. This method has the advantages of simple operation, high sensitivity, low detection limit and good stability. It is suitable for determination of cobalt and tungsten in urine of all kinds of people.

[Optimizing experimental conditions of graphite furnace atomic absorption spectrometer using orthogonal design for determination of cobalt in urine]

Objective: To select and optimize the conditions of urine cobalt determination by graphite furnace atomic absorption spectroscopy and establish a method for urine cobalt determination. Methods: In April 2020, the matrix modifier and spectrum wavelength were selected by mathematical statistics method, the heating procedure of graphite furnace was optimized, the variance of orthogonal test results was analyzed, and the working curve was quantified by external standard method. Results: The results showed that the diammonium hydrogen phosphate was a matrix modifier with a wavelength of 240.7 nm, and the optimized graphite furnace heating procedure showed a good linear relationship at 5-80 μg/L. The correlation coefficient was 0.9991. The detection limit was 0.9 μg/L, the lowest detection concentration was 1.8 μg/L. The recovery was 94.0%-101.4%, and the precision was 2.6%-5.8%. Conclusion: The orthogonal design method can efficiently and scientifically optimize the optimal combination of the various factor levels of graphite furnace atomic absorption spectrometry. The determination method established based on this has high precision and good accuracy, and can be applied to the determination of cobalt in urine.

[Application of an occupational health risk assessment method in dioctyl phthalate producing enterprise]

Objective: To find the risk assessment model of [di (2-ethylhexyl) phthalate, DEHP] fitting well for producing companies. Methods: The Cluster Sampling method was used in selecting a DEHP producing company in the occupational health and workplace environment monitoring study conducted between July and August in 2017. Data was collected by site evaluating and workplace environment monitoring. According to GBZ/T 298-2017《Technical Guidelines for Occupational Health Risk Assessment of Chemical Hazards in the Workplace》, a qualitative assessment method and a semi-quantitative comprehensive index method were chosen as the models and were compared. Results: The occupational health risk of the two methods rated 4 (high risk) and 2 (negligible risk) . Conclusion: The semi-quantitative comprehensive index method is more comprehensive and accurate when used to assess the occupational health risk caused by DEHP.

[Determination of nitrogen oxides in the air of workplace by ion chromatography]

Objective: Improvement the method of nitrogen oxide sampling, analysis and detection in workplace air. Methods: Absorption and collection with sodium carbonate-sodium bicarbonate buffer solution, analysised by ion chromatography, anion column AS23, column temperature 30 ℃. Results: The linearity of the nitrite ion in the corresponding mass concentration range 0~90.0 μg/ml was good (Nitrogen dioxide in 0~120.0 mg/m(3)) , correlation coefficient>0.999 5. The detection limit was 0.16 μg/ml, The minimum detection concentration was 0.11 mg/m(3) with the sampling volume 7.5 L. Conclusion: The method has good accuracy, high sensitivity, with directing injection and no pre-treatment, and can popularize in general laboratories, and can satisfy the determination of nitrogen oxides in the air of workplace.

[Determination of p-Anisidine in workplace air by HPLC]

Objective: To establish an HPLC method for determining p-Anisidine in workplace air. Methods: An C(18) capillary column was used with the detection wavelength of 240 nm, the methanol solution (v/v=62:38) as mobile phase, the flow rate was 0.9 ml/min, and the injection volume was 20 μl. Results: The linear range (μg/ml) for p-Anisidine was 0~100; correlation coefficient was 0.999 7; the detection limit was 0.15 μg/ml; the average precision of RSD was 4.4%. The sampling efficiency was more than 95% using silicone tube as sampling filter. Sample can be stored at room temperature for more than 7 d. Conclusion: the method appered to be accurate, simple, sensitive and reliable, also have a high sampling efficiency, and can be usd to determine p-anisidine in workplace air simultaneously.

[The application of combining low dose naloxone with ropivacaine in supraclavicular brachial plexus block]

Objective: To observe the effect of low dose naloxone combinewith ropivacaine for supraclavicular brachial plexus block. Methods: Seventy patients undergoing elective upper limb surgery were randomly divided into two groups, ropivacaine group (Group R, n=35) and naloxone group (Group N, n=35). An ultrasound guided technique was used in both two groups.The onset and duration time of sensory and motor blockade, visual analog score(VAS)of 3, 6, 12, 18, 24 h postoperatively, time of first request fordezocine, total amount of dezocine needed, incidence of nausea and vomiting postoperatively(PONV) and patients' satisfaction score for analgesia in 24 h after surgery were measured.At the same time, blood samples were taken before anesthesia, 6 h, 24 h after operation for inspecting the concentration of β-endorphin(β-EP)in plasma. Results: The duration of sensory and motor blockade, time of first request for dezocine in Group N were 736.0(713.5, 836.5), 514.5(491.3, 572.8), 708.5(683.2, 877.0)min, which were all prolonged compared to Group R(522.0(469.5, 606.5), 401.0(370.0, 458.5), 570.0(435.0, 618.5)min)(Z=-6.844, -6.758, -6.700, all P<0.01). The 6, 12, 18 h postoperatively VAS of Group N were 0, 5.0(3.0, 5.8), 5.0(5.0, 6.0)point. Among which the 6, 12 h postoperatively VAS of Group N were lower than that of Group R(1.0(1.0, 3.5), 6.0(6.0, 7.0)point)(Z=-6.596, -4.864, all P<0.01), while the 18 h postoperatively VAS was higher than that of Group R (5.0(4.0, 5.0)point)(Z=-2.603, P<0.01). Total amount of dezocine needed in Group N in 24 h after surgery was 7.5(5.0, 10.0)mg, which was lower than that of Group R(10.0(10.0, 15.0)mg)(Z=-3.449, P<0.01). The incidence of PONV after surgery in Group N was 21.9%, which was lower than that of Group R(45.5%)(χ(2)=4.034, P<0.05). Ptients' satisfaction score for analgesia in 24 h after surgery in Group N was 8.0(7.0, 8.0)point, which was higher than that of Group R(7.0(6.0, 7.0)point)(Z=-3.509, P<0.01). At 6 h postoperatively , the concentration of plasma β-EP in Group N was(113.34±12.36)μg/L, lower than that of Group R((147.14±11.65)μg/L)(t=-7.694, P<0.01). Conclusion: Low dose naloxone combine with ropivacaine for supraclavicular brachial plexus block, prolong the duration of sensory and motor blockade without affecting the onset time.

[Determination of 1-hydroxy-2-butanone in urine by gas chromatography]

Objective: To establish a method for the determination of 1-hydroxy-2-butanone in urine by gas chromatography. Methods: Urine samples were acidified with hydrochloric acid, and then stored in the refrigerator . After thawing under natural conditions, urine volume of 2.0 ml was extracted by C₁₈ solid phase, using methanol volume of 2.0 ml elution, detected by gas chromatography with FID detector and quantified by external standard method. Results: The measurement range of method is 0.986 ~32.88 μg/ml, correlation coefficient (r) =0.999 7, detection limit is 0.13 μg/ml; The recovery is 88.1% ~92.2% ; The precision is 1.4% ~3.2%. Conclusion: This method has a high sensitivity and simple processing. All technical indicators can meet the requirements of the determination method.

Some altered concentrations of elements in semen of workers exposed to trinitrotoluene

OBJECTIVES

A cross sectional study was performed to find the concentrations of elements contained in the semen of workers exposed to trinitrotoluene (TNT).

SUBJECTS AND METHODS

Semen of exposed workers in two TNT plants located in He-Nan Province in 1992 were examined.

RESULTS

The average TNT concentrations in the workplace, except the packing site, were found to have exceeded the maximal allowable concentration (MAC, 1 mg/m3); skin contaminations of male workers exposed to TNT were higher after a shift than in controls, and correlated with the total blood concentrations of TNT, 4-amino-2, 6-dinitrotoluene (4A), and 2-amino-4, 6-dinitrotoluene (2A). Cu, Zn, Na, Mg, and Se concentrations were significantly decreased, but K, Ca, Co, Mn and Li contents were not significantly changed in the semen of workers exposed to TNT. Compared with the control group, the percentage of liquifying time of semen, the sperm malformation incidence, and viability in the men exposed to TNT were all significantly changed.

CONCLUSIONS

Men exposed to TNT have decreased concentrations of some elements is semen and altered semen physiology.