Fabrication of p-type 2D single-crystalline transistor arrays with Fermi-level-tuned van der Waals semimetal electrodes

High-performance p-type two-dimensional (2D) transistors are fundamental for 2D nanoelectronics. However, the lack of a reliable method for creating high-quality, large-scale p-type 2D semiconductors and a suitable metallization process represents important challenges that need to be addressed for future developments of the field. Here, we report the fabrication of scalable p-type 2D single-crystalline 2H-MoTe2 transistor arrays with Fermi-level-tuned 1T'-phase semimetal contact electrodes. By transforming polycrystalline 1T'-MoTe2 to 2H polymorph via abnormal grain growth, we fabricated 4-inch 2H-MoTe2 wafers with ultra-large single-crystalline domains and spatially-controlled single-crystalline arrays at a low temperature (~500 °C). Furthermore, we demonstrate on-chip transistors by lithographic patterning and layer-by-layer integration of 1T' semimetals and 2H semiconductors. Work function modulation of 1T'-MoTe2 electrodes was achieved by depositing 3D metal (Au) pads, resulting in minimal contact resistance (~0.7 kΩ·μm) and near-zero Schottky barrier height (~14 meV) of the junction interface, and leading to high on-state current (~7.8 μA/μm) and on/off current ratio (~105) in the 2H-MoTe2 transistors.

Laser-Induced Phase Transition and Patterning of hBN-Encapsulated MoTe2

Transition metal dichalcogenides exhibit phase transitions through atomic migration when triggered by various stimuli, such as strain, doping, and annealing. However, since atomically thin 2D materials are easily damaged and evaporated from these strategies, studies on the crystal structure and composition of transformed 2D phases are limited. Here, the phase and composition change behavior of laser-irradiated molybdenum ditelluride (MoTe₂ ) in various stacked geometry are investigated, and the stable laser-induced phase patterning in hexagonal boron nitride (hBN)-encapsulated MoTe₂ is demonstrated. When air-exposed or single-side passivated 2H-MoTe₂ are irradiated by a laser, MoTe₂ is transformed into Te or Mo₃ Te₄ due to the highly accumulated heat and atomic evaporation. Conversely, hBN-encapsulated 2H-MoTe₂ transformed into a 1T' phase without evaporation or structural degradation, enabling stable phase transitions in desired regions. The laser-induced phase transition shows layer number dependence; thinner MoTe₂ has a higher phase transition temperature. From the stable phase patterning method, the low contact resistivity of 1.13 kΩ µm in 2H-MoTe₂ field-effect transistors with 1T' contacts from the seamless heterophase junction geometry is achieved. This study paves an effective way to fabricate monolithic 2D electronic devices with laterally stitched phases and provides insights into phase and compositional changes in 2D materials.

Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC

DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6  ×  6  ×  6 m 3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties.

Structural Phase Transition and Interlayer Coupling in Few-Layer 1T' and Td MoTe2

We performed polarized Raman spectroscopy on mechanically exfoliated few-layer MoTe₂ samples and observed both 1T' and T_d phases at room temperature. Few-layer 1T' and T_d MoTe₂ exhibited a significant difference especially in interlayer vibration modes, from which the interlayer coupling strengths were extracted using the linear chain model: strong in-plane anisotropy was observed in both phases. Furthermore, temperature-dependent Raman measurements revealed a peculiar phase transition behavior in few-layer 1T' MoTe₂. In contrast to bulk 1T' MoTe₂ crystals, where the phase transition to the T_d phase occurs at ∼250 K, the temperature-driven phase transition to the T_d phase is increasingly suppressed as the thickness is reduced, and the transition and the critical temperature varied dramatically from sample to sample even for the same thickness. Raman spectra of intermediate phases that correspond to neither 1T' nor T_d phase with different interlayer vibration modes were observed, which suggests that several metastable phases exist with similar total energies.