[Determination of Allyl Isothiocyanate in Mustard and Horseradish Extracts by Single Reference GC and HPLC Based on Relative Molar Sensitivities]

The main component of the Mustard and Horseradish extracts, which are used as natural food additives in Japan, is allyl isothiocyanate (AITC). The determination of AITC using GC-FID is the official method employed in the quality control assessments for these products. In this method, a commercially available AITC reagent is used as a calibrant. However, ¹H-quantitative NMR (qNMR) analysis revealed that the AITC reagents contain impurity. Therefore, we examined the GC-FID and HPLC-refractive index detector (LC-RID) method based on relative molar sensitivities (RMSs) to high-purity single reference (SR). The RMSs of AITC/SR under the GC-FID and LC-RID conditions were accurately determined using qNMR. The AITC in two types of food additives was quantified using qNMR, SR GC-FID, and SR LC-RID methods. Both SR GC-FID and SR LC-RID showed good agreement within 2% with the AITC content determined by direct qNMR.

Quantitative proton nuclear magnetic resonance method for simultaneous analysis of fluticasone propionate and azelastine hydrochloride in nasal spray formulation

A facile, rapid, accurate and selective quantitative proton nuclear magnetic resonance (¹H-qNMR) method was developed for the simultaneous determination of fluticasone propionate (FLP) and azelastine hydrochloride (AZH) in pharmaceutical nasal spray for the first time. The ¹H-qNMR analysis of the studied analytes was performed using inositol as the internal standard and dimethyl sulfoxide-d₆ (DMSO-d₆) as the solvent. The quantitative selective proton signal of FLP was doublet of doublet at 6.290, 6.294, 6.316 and 6.319 ppm, while that of AZH was doublet at 8.292 and 8.310 ppm. The internal standard (inositol) produced a doublet signal at 3.70 and 3.71 ppm. The method was rectilinear over the concentration ranges of 0.25-20.0 and 0.2-15.0 mg ml^-1 for FLP and AZH, respectively. No labelling or pretreatment steps were required for NMR analysis of the studied analytes. The proposed ¹H-qNMR method was validated efficiently according to the International Council on Harmonisation guidelines in terms of linearity, limit of detection, limit of quantification, accuracy, precision, specificity and stability. Moreover, the method was applied to assay the analytes in their combined nasal spray formulation. The results ensured the linearity (r ² > 0.999), precision (% RSD < 1.5), stability, specificity and selectivity of the developed method.

Graphene Assisted in the Analysis of Coumarins in Angelicae Pubescentis Radix by Dispersive Liquid-Liquid Microextraction Combined with 1H-qNMR

The content of active components in traditional Chinese medicine is relatively small, and it is difficult to detect some trace components with modern analytical instruments, so good pretreatment and extraction are very important in the experiment. Graphene was introduced by a dispersive liquid–liquid microextraction method based on solidification of floating organic drop (DLLME-SFO) with graphene/1-dodecyl alcohol used as the extractant, and this method, combined with quantitative proton nuclear magnetic resonance spectroscopy (¹H-qNMR), was used to simultaneously qualitative and quantitative osthole, columbianadin and isoimperatorin in Angelicae Pubescentis Radix. In this experiment, a magnetic stirrer was used for extraction, all NMR spectra were recorded on a Bruker Advance III 600 MHz spectrometer with dimethyl sulfoxide-d₆ (DMSO-d₆) as deuterated solvent and pyrazine as the internal standard. The influencing factors and NMR parameters in the extraction process were investigated and optimized. In addition, the methodology of the established method was also examined. The quantitative signals of osthole, columbianadin and isoimperatorin were at a chemical shift of δ6.25–δ6.26 ppm, δ6.83–δ6.85 ppm, and δ6.31–δ6.32 ppm. The linear ranges of osthole, columbianadin and isoimperatorin were all 0.0455–2.2727 mg/mL, and R² were 0.9994, 0.9994 and 0.9995, respectively. The limits of detection of osthole, columbianadin and isoimperatorin were 0.0660, 0.0720, 0.0620 mg, and the limits of quantification of osthole, columbianadin and isoimperatorin were 0.2201, 0.2401, 0.2066 mg/mL. The solution had good stability and repeatability within 24 h. The recoveries of osthole, columbianadin and isoimperatorin were 102.26%, 99.89%, 103.28%, respectively. The established method is simple and easy to operate, which greatly reduces the cumbersome pretreatment of samples and has high extraction efficiency.

[Quantitative Analysis of Piperine and the Derivatives in Long Pepper Extract by HPLC Using Relative Molar Sensitivity]

A novel method was developed for quantification of five major piperine derivatives (piperanine, piperine, chavicine, isopiperine, and isochavicine) in a hot water extract of long pepper fruit (LPE) using the relative molar sensitivity (RMS) based on the combination of HPLC/UV and ¹H- quantitative NMR (¹H-qNMR). The RMSs of piperanine, chavicine, isopiperine, and isochavicine to piperine of which the absolute purity was determined by ¹H-qNMR were calculated to be 0.3693, 1.138, 0.9164, and 1.277, respectively. The total amount of piperine derivatives in LPE was quantified by both ¹H-qNMR and HPLC/UV based on the RMS using piperine as a single-reference material (RMS method). The relative difference in quantitation values of ¹H-qNMR and calibration curve method from the RMS method was 2.01% or less. The relative difference of the total cis-trans piperine isomers content between before and after photoirradiation in piperine solution was quantified to be 2.84% by the RMS method. In addition, the interlaboratory difference of the RMS method was confirmed in the range of 0.600 to 4.00 μg/g when analysis was performed on piperine derivatives in LPE containing tablets, while the total amount of piperine derivatives in the tablets was quantified at 606 μg/g. Our proposed method is a reliable tool for determining the contents of piperine and the derivatives in LPE and processed foods containing LPE.

Determination of perillaldehyde in perilla herbs using relative molar sensitivity to single-reference diphenyl sulfone

Perillaldehyde (PRL) is one of the essential oil components derived from perilla plants (Perilla frutescens Britton) and is a characteristic compound of the traditional medicine "perilla herb ()" listed in the The Japanese Pharmacopoeia, 17th edition (JP17). HPLC using an analytical standard of PRL has been used to quantitatively determine the PRL content in perilla herb. However, PRL reagents have been reported to decompose easily. In this study, we utilized an alternative quantitative method using on a single reference with relative molar sensitivity (RMS) based on the results of experiments performed in two laboratories. It was possible to calculate the exact RMS using an offline combination of ¹H-quantitative NMR spectroscopy (¹H-qNMR) and an HPLC/photodiode array (PDA) detector (or an HPLC/variable-wavelength detector [VWD]). Using the RMS of PRL to the single-reference compound diphenyl sulfone (DFS), which is an inexpensive and stable compound, the PRL content in the perilla herb could be determined using HPLC/PDA or HPLC/VWD without the need for the analytical standard of PRL. There was no significant difference between the PRL contents of perilla herb determined using the method employing the single-reference DFS with RMS and using the JP17 assay, the calibration curve of which was generated using the analytical standard of PRL with adjusted purity measured by ¹H-qNMR. These results demonstrate that our proposed method using a single reference with RMS is suitable for quantitative assays of perilla herb and can be an alternative method for the current assay method defined in the JP17.

Application of a quantitative 1H-NMR (1H-qNMR) method for the determination of geniposidic acid and acteoside in Plantaginis semen

A quantitative ¹H-NMR method (¹H-qNMR) was developed to determine the concentration of acteoside and geniposidic acid in Plantaginis semen, which is an important crude drug for diuretic purposes. The purity of geniposidic acid and acteoside was determined by the ratio of the intensity of the H-3 signal at δ 7.51 ppm or the H-7″ signal at δ 7.58 ppm in methanol-d ₄ to that of a hexamethyldisilane (HMD) signal at 0.04 ppm, respectively. The concentration of HMD was corrected with the International System of Units traceability using potassium hydrogen phthalate of certified reference material grade. The geniposidic acid content in two batches of Plantaginis semen as determined by ¹H-qNMR was found to be 0.84 and 1.00 %, and the acteoside content was determined to be 0.80 and 0.93 %. We demonstrated that this method is useful for the quantitative analysis of geniposidic acid and acteoside in Plantainis semen.

(1) H-NMR quantification of major saccharides in açaí raw materials: a comparison of the internal standard methodology with the absolute intensity qNMR method

INTRODUCTION

While the use of internal standard methodology for qNMR is a proven and reliable form of quantification, simplified alternative approaches are needed. Agilent's absolute intensity qNMR utility software is a valuable alternative that has not yet been subjected to validation in the peer-reviewed literature.

OBJECTIVE

To provide validation of Agilent's absolute intensity qNMR method with a specific application to natural product quantification by measuring saccharide content in açaí materials.

METHODS

In order to validate the method, calibration test samples of ibuprofen were prepared in DMSO-d6 at nine different concentrations and measured with (1) H-NMR. A minimum of 40 spectra were collected for each sample, and the absolute intensity utility was used for quantification. The same methodology was then applied to the açaí materials, creating triplicates for each of the materials and using 3-(trimethylsilyl)-1-propanesulphonic acid sodium salt in water-d2 as both the solvent and internal standard. (1) H-NMR spectra were collected, and the amounts of glucose, sucrose and fructose were determined using both the internal standard approach and the absolute intensity qNMR method.

RESULTS

Applying the absolute intensity utility to the ibuprofen samples demonstrated a linear response (R(2)  = 0.99943). For the açaí investigations, results obtained from the absolute intensity method were comparable to those obtained from the internal standard approach, with percentage differences ranging from 0.5-6.2%.

CONCLUSION

This study demonstrates the accuracy, precision and reliability of Agilent's absolute intensity qNMR method. In addition, practical information is provided for assessing the saccharide contents of açaí materials.