Cyclic olefin copolymer (COC) as a promising biomaterial for affecting bacterial colonization: investigation on Vibrio campbellii

Cyclic olefin copolymer (COC) has emerged as an interesting biocompatible material for Organ-on-a-Chip (OoC) devices monitoring growth, viability, and metabolism of cells. Despite ISO 10993 approval, systematic investigation of bacteria grown onto COC is a still not documented issue. This study discusses biofilm formations of the canonical wild type BB120 Vibrio campbellii strain on a native COC substrate and addresses the impact of the physico-chemical properties of COC compared to conventional hydroxyapatite (HA) and poly(dimethylsiloxane) (PDMS) surfaces. An interdisciplinary approach combining bacterial colony counting, light microscopy imaging and advanced digital image processing remarks interesting results. First, COC can reduce biomass adhesion with respect to common biopolymers, that is suitable for tuning biofilm formations in the biological and medical areas. Second, remarkably different biofilm morphology (dendritic complex patterns only in the case of COC) was observed among the examined substrates. Third, the observed biofilm morphogenesis was related to the interaction of COC with the conditioning layer of the planktonic biological medium. Fourth, Level Co-occurrence Matrix (CGLM)-based analysis enabled quantitative assessment of the biomass textural fractal development under different coverage conditions. All of this is of key practical relevance in searching innovative biocompatible materials for pharmaceutical, implantable and medical products.

Zwitterionic surfactant as an additive for efficient electrophoretic separation of easily absorbed rhodamine dyes on plastic microchips

Plastic microchips possess the advantages of easy fabrication and low-cost, but their surface properties are frequently incompatible with electrophoretic separation without proper surface modification. Meanwhile, the separation microchannels on typical microchips are usually only a few centimeters long, the pressurized flow may significantly affect the electrophoretic separation if their inner diameters (id) are relatively larger (approximately > 50 μm), viscous separation medium is therefore required for efficient separation. Herein, a zwitterionic surfactant, N-hexadecyl-N,N-dimethyl-3-ammonio-1-propane sulfonate (HDAPS), was used as a multifunctional additive to inhibit the analyte adsorption, improve the surface status, control Joule heating and modulate the resolution on cyclic olefin copolymer microchips with 80 μm id, 5 cm long separation microchannels, eliminating the necessity of viscous polymeric additives. The effectiveness of HDAPS was compared with an ionic polymeric additive, poly(diallydimethylammonium chloride). The streaming potential and electroosmotic flow measurements indicated an effective inhibition of the adsorption of rhodamine B and a stable negative surface charge with zwitterionic HDAPS. Using 15 mmol/L HDAPS, 40% (v/v) methanol, and 10 mmol/L boric acid (pH 3.2) as the running buffer, rapid separation of four rhodamines was achieved within 90 s under a separation electric field of 520 V/cm. The theoretical plate numbers were in a range of 5.0×10⁵-6.9×10⁵/m. The relative standard deviations were no more than 0.9% for retention time and 1.5% for peak area. The proposed system was verified by the determination of rhodamines in eyeshadow and wolfberry, with standard recoveries in a range of 98.2%-101.4%.

Device Fabrication and Fluorescent Labeling of Preterm Birth Biomarkers for Microchip Electrophoresis

An unmet need exists for a clinical diagnostic to determine preterm birth (PTB) risk. Such an assessment is possible with high sensitivity and specificity using a panel of nine biomarkers. An integrated microfluidic analysis system for these biomarkers is being developed which includes microchip electrophoresis (μCE) separation. A t-shaped microchip device can be used to test the μCE portion of this integrated system to find appropriate separation conditions. These t-shaped microchips can be fabricated using photolithographically patterned Si templates and hot embossing. PTB biomarkers can be fluorescently labeled using an amine-reactive dye prior to μCE. The μCE conditions established using this t-shaped device should be useful in developing a complete integrated microfluidic system for PTB risk assessment.

Extractables characterization for five materials of construction representative of packaging systems used for parenteral and ophthalmic drug products

Polymeric and elastomeric materials are commonly encountered in medical devices and packaging systems used to manufacture, store, deliver, and/or administer drug products. Characterizing extractables from such materials is a necessary step in establishing their suitability for use in these applications. In this study, five individual materials representative of polymers and elastomers commonly used in packaging systems and devices were extracted under conditions and with solvents that are relevant to parenteral and ophthalmic drug products (PODPs). Extraction methods included elevated temperature sealed vessel extraction, sonication, refluxing, and Soxhlet extraction. Extraction solvents included a low-pH (pH = 2.5) salt mixture, a high-pH (pH = 9.5) phosphate buffer, a 1/1 isopropanol/water mixture, isopropanol, and hexane. The resulting extracts were chemically characterized via spectroscopic and chromatographic means to establish the metal/trace element and organic extractables profiles. Additionally, the test articles themselves were tested for volatile organic substances. The results of this testing established the extractables profiles of the test articles, which are reported herein. Trends in the extractables, and their estimated concentrations, as a function of the extraction and testing methodologies are considered in the context of the use of the test article in medical applications and with respect to establishing best demonstrated practices for extractables profiling of materials used in PODP-related packaging systems and devices.

LAY ABSTRACT

Plastic and rubber materials are commonly encountered in medical devices and packaging/delivery systems for drug products. Characterizing the extractables from these materials is an important part of determining that they are suitable for use. In this study, five materials representative of plastics and rubbers used in packaging and medical devices were extracted by several means, and the extracts were analytically characterized to establish each material's profile of extracted organic compounds and trace element/metals. This information was utilized to make generalizations about the appropriateness of the test methods and the appropriate use of the test materials.