Sustainable management of campus fallen leaves through low-temperature pyrolysis and application in Pb immobilization

Realizing campus sustainability requires the environmental-friendly and economical treatment of tremendous fallen leaves. Producing fallen leaf biochar at a low temperature is a candidate approach. In this study, six common types of fallen leaves on the campus were pyrolyzed at 300 °C. The obtained biochars were characterized and the adsorption mechanisms of lead (Pb) by the fallen leaf biochars were investigated. The adsorption capacity of leaf biochar for Pb was relatively high, up to 209 mg/g (Yulania denudata leaf biochar). Adsorption of Pb onto active sites was the rate-limiting step for most leaf biochars. But for Platanus leaf biochar, intraparticle diffusion of Pb2+ dominated owing to the lowest adsorption capacity. However, the highest exchangeable Pb fraction (27%) indicated its potential for removing aqueous Pb2+. Ginkgo and Prunus cerasifera leaf biochar immobilized Pb by surface complexation and precipitation as lead oxalate. Hence, they were suitable for soil heavy metal remediation. This study shed the light on the sustainable utilization of campus fallen leaves and the application of fallen leaf biochars in heavy metal remediation.

Production of medium-chain fatty acids by co-fermentation of antibiotic fermentation residue with fallen Ginkgo leaves

The co-fermentation of antibiotic fermentation residues (AFRs) and fallen Ginkgo leaves at C/N ratios of 10-60 was conducted for medium-chain fatty acids (MCFA) production. It was found that a proper C/N ratio could largely promote the MCFA accumulation. Group with C/N ratio of 50 exhibited highest MCFA production of 133.14 mmol C/L, which was 42 %-121 % higher than the other groups. Through the co-fermentation, substrate condition was optimized with rich micro-nutrients in AFRs and abundant polysaccharides in Ginkgo leaves, the hydrolysis of leaves was promoted by the active microbes in AFRs, and the predominance of CE microbes was also stimulated with the dilution of AFRs. The increased C/N ratio significantly affected the SCFA producers like genus Escherichia Shigella and Proteiniphilum, and enriched CE microbes like genus Romboutsia, Eubacterium and Clostridium_sensu_stricto_12. Functional enzymes analysis showed that both reverse β oxidation and fatty acid biosynthesis pathways were strengthened with the increased C/N ratio.

Biohydrogen production by co-fermentation of antibiotic fermentation residue and fallen leaves: Insights into the microbial community and functional genes

This investigation explored the co-fermentation of antibiotic fermentation residue (AFR) and fallen leaves for enhancing biohydrogen production, and analyzed the mechanism from the aspects of microbial activity, microbial community and functional genes. The results showed that the optimal mixing ratio of AFR to leaves was 25:75 (VS basis), which balanced the substrate condition and synergistically enhanced the biohydrogen productivity, and the hydrogen yield was 37.45 mL/g-VS_added, which was 438.8% and 9.2% higher compared to the sole AFR fermentation and the sole leaves fermentation, respectively. The co-fermentation also improved the organics utilization and induced a more effective metabolic pathway. Further microbiology analysis found that the co-fermentation promoted the microbial activity, enriched more hydrogen-producing bacteria (Clostridium sensu stricto 1), and enhanced the expression of hydrogen-producing functional genes (e.g. genes encoding ferredoxin hydrogenase (EC 1.12.7.2) and pyruvate-ferredoxin oxidoreductase (EC 1.2.7.1)), which were fundamentally responsible for the synergistic biohydrogen fermentation.

Biohydrogen production from co-fermentation of fallen leaves and sewage sludge

The co-fermentation of fallen leaves and sewage sludge was performed for the production of hydrogen at different mixing ratios. The experimental results indicated that the optimal mixing ratio of sludge to leaves was 20:80 (volatile solids (VS) basis), and the co-fermentation process showed a synergistic effect on biohydrogen production at this mixing ratio. The biohydorgen yield reached 37.8 mL/g-VS_added at the mixing ratio of 20:80, which was higher compared to the mono-fermentation of sludge (10.3 mL/g-VS_added) or the leaves (30.5 mL/g-VS_added). The VS removal was also highest (15.7%) at the mixing ratio of 20:80, which was higher compared to sludge mono-fermentation (6.2%) or leaves mono-fermentation (12.8%). Meanwhile, the co-fermentation process enhanced the biohydrogen production rate and led to a more efficient fermentation pathway. Microbial community analysis showed that the co-fermentation system enriched much more Clostridium, Bacillus and Rummeliibacillus genera, which was responsible for the synergistic effect on biohydrogen production.

Evaluation of a method for removing cesium and reducing the volume of leaf litter from broad-leaved trees contaminated by the Fukushima Daiichi nuclear accident during the Great East Japan Earthquake

The town of Marumori in southern Miyagi Prefecture borders on Fukushima Prefecture, and following the accident at the Fukushima Daiichi nuclear power plant, there were concerns about cesium deposition in forested areas. One of the authors of this paper has continually surveyed leaf litter from the forested areas. As leaf litter may be a source of cesium contamination from the forest to downstream areas, we considered a simplified version of wet oxidation, a method previously presented by one of the authors of this study, as a technology to reduce leaf litter weight and cesium concentration, separating radioactive nuclides from non-radioactive ones, in leaf litter. We tested our method in three experiments. Experiment 1 used new leaf litter (232 Bq/kg) from the surface of a small stream at the forest edge nearby an area with air dose level higher than the national standard threshold of 0.23 μSv/h for the implementation of governmental decontamination works. Experiment 2 applied wet oxidation to older leaf litter (705 Bq/kg) harvested from a pasture nearby the stream mentioned above. We also used the same leaf litter in experiment 3 for a cesium release tests using pure water. In experiment 1 and 2 we treated leaf litter with a sodium hypochlorite solution, optimizing sodium hypochlorite concentration and reaction temperature. We measured a 50-60% decrease in the leaf litter weight and a 60% decrease in the cesium concentration. Moreover, we also measured the amount of cesium washout. The cesium budget of experiment 1 showed no cesium gasification (wet oxidation avoids airborne cesium as this element is prone to be volatile at 600 °C), and that high sodium hypochlorite concentration and high temperature had a strong positive effect on leaf litter volume reduction and cesium decontamination. Experiment 2 confirmed the reproducibility of these results in leaves with different cesium concentration and harvested in different conditions. We could also explain the mechanism behind leaf litter weight and cesium concentration reduction. Experiment 3 helped us to investigate the effects of the matter present on the surface of the water and the contribution of water soluble cesium. Concurrent experiments on changes in leaf litter chemical composition confirmed that our modified wet oxidation method had an effect on the removal of acid-insoluble lignin. Removal of lignin, a refractory component, might allow for a better utilization of the residue left after implementation of the proposed simplified wet oxidation. Thus, real wastes could be smaller than the residues. Together with the observed smaller cesium concentration in the residue, the proposed method in this study is expected to contribute to mitigate the risk due to the fallen leaves containing cesium.