Realizing Persistent Zero Area Compressibility over a Wide Pressure Range in Cu2 GeO4 by Microscopic Orthogonal-Braiding Strategy

Zero area compressibility (ZAC) is an extremely rare mechanical response that exhibits an invariant two-dimensional size under hydrostatic pressure. All known ZAC materials are constructed from units in two dimensions as a whole. Here, we propose another strategy to obtain the ZAC by microscopically orthogonal-braiding one-dimensional zero compressibility strips. Accordingly, ZAC is identified in a copper-based compound with a planar [CuO4 ] unit, Cu2 GeO4 , that possesses an area compressibility as low as 1.58(26) TPa-1 over a wide pressure range from ≈0 GPa to 21.22 GPa. Based on our structural analysis, the subtle counterbalance between the shrinkage of [CuO4 ] and the expansion effect from the increase in the [CuO4 ]-[CuO4 ] dihedral angle attributes to the ZAC response. High-pressure Raman spectroscopy, in combination with first-principles calculations, shows that the electron transfer from in-plane bonding dx 2 -y 2 to out-of-plane nonbonding dz 2 orbitals within copper atoms causes the counterintuitive extension of the [CuO4 ]-[CuO4 ] dihedral angle under pressure. Our study provides an understanding on the pressure-induced structural evolution of copper-based oxides at an electronic level and facilitates a new avenue for the exploration of high-dimensional anomalous mechanical materials.

High-Pressure Fabrication of Binary Organic Solar Cells with High Molecular Weight D18 Yields Record 19.65 % Efficiency

In this work, inspired by the principles of a pressure cooker, we utilized a high-pressure method to address the processing challenges associated with high molecular weight polymers. Through this approach, we successfully dissolved high molecular weight D18 in chloroform at 100 °C within a pressure-tight vial. The increased steam pressure raised the boiling point and dissolving capacity of chloroform, enabling the creation of a hybrid film with superior properties, including more ordered molecular arrangement, increased crystallinity, extended exciton diffusion length, and improved phase morphology. Organic solar cells (OSCs) based on D18 : L8-BO prepared using this high-pressure method achieved an outstanding power conversion efficiency of 19.65 %, setting a new record for binary devices to date. Furthermore, this high-pressure method was successfully applied to fabricate OSCs based on other common systems, leading to significant enhancements in device performance. In summary, this research introduces a universal method for processing high molecular weight D18 materials, ultimately resulting in the highest performance reported for binary organic solar cells.

On the Electride Nature of Na-hP4

Early quantum mechanical models suggested that pressure drives solids towards free-electron metal behavior where the ions are locked into simple close-packed structures. The prediction and subsequent discovery of high-pressure electrides (HPEs), compounds assuming open structures where the valence electrons are localized in interstitial voids, required a paradigm shift. Our quantum chemical calculations on the iconic insulating Na-hP4 HPE show that increasing density causes a 3s→3pd electronic transition due to Pauli repulsion between the 1s2s and 3s states, and orthogonality of the 3pd states to the core. The large lobes of the resulting Na-pd hybrid orbitals point towards the center of an 11-membered penta-capped trigonal prism and overlap constructively, forming multicentered bonds, which are responsible for the emergence of the interstitial charge localization in Na-hP4. These multicentered bonds facilitate the increased density of this phase, which is key for its stabilization under pressure.

Stabilization Of The CN3 5- Anion In Recoverable High-pressure Ln3 O2 (CN3 ) (Ln=La, Eu, Gd, Tb, Ho, Yb) Oxoguanidinates

A series of isostructural Ln3 O2 (CN3 ) (Ln=La, Eu, Gd, Tb, Ho, Yb) oxoguanidinates was synthesized under high-pressure (25-54 GPa) high-temperature (2000-3000 K) conditions in laser-heated diamond anvil cells. The crystal structure of this novel class of compounds was determined via synchrotron single-crystal X-ray diffraction (SCXRD) as well as corroborated by X-ray absorption near edge structure (XANES) measurements and density functional theory (DFT) calculations. The Ln3 O2 (CN3 ) solids are composed of the hitherto unknown CN3 5- guanidinate anion-deprotonated guanidine. Changes in unit cell volumes and compressibility of Ln3 O2 (CN3 ) (Ln=La, Eu, Gd, Tb, Ho, Yb) compounds are found to be dictated by the lanthanide contraction phenomenon. Decompression experiments show that Ln3 O2 (CN3 ) compounds are recoverable to ambient conditions. The stabilization of the CN3 5- guanidinate anion at ambient conditions provides new opportunities in inorganic and organic synthetic chemistry.

Anomalous Charge Transfer from Organic Ligands to Metal Halides in Zero-Dimensional [(C6 H5 )4 P]2 SbCl5 Enabled by Pressure-Induced Lone Pair-π Interaction

Low-dimensional (low-D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low-D OMHHs, especially the zero-D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near-unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C6 H5 )4 P]2 SbCl5 . In situ experimental characterizations and theoretical simulations reveal that the pressure-induced electronic coupling between the lone-pair electrons of Sb3+ and the π electrons of benzene ring (lp-π interaction) serves as an unexpected "bridge" for the charge transfer. Our work opens a versatile strategy for the new materials design by manipulating the lp-π interactions in organic-inorganic hybrid systems.

Synthesis and Post-Processing of Chemically Homogeneous Nanothreads from 2,5-Furandicarboxylic Acid

Compared with conventional, solution-phase approaches, solid-state reaction methods can provide unique access to novel synthetic targets. Nanothreads-one-dimensional diamondoid polymers formed through the compression of small molecules-represent a new class of materials produced via solid-state reactions, however, the formation of chemically homogeneous products with targeted functionalization represents a persistent challenge. Through careful consideration of molecular precursor stacking geometry and functionalization, we report here the scalable synthesis of chemically homogeneous, functionalized nanothreads through the solid-state polymerization of 2,5-furandicarboxylic acid. The resulting product possesses high-density, pendant carboxyl functionalization along both sides of the backbone, enabling new opportunities for the post-synthetic processing and chemical modification of nanothread materials applicable to a broad range of potential applications.

Superconductivity in an Orbital-Reoriented SnAs Square Lattice: A Case Study of Li0.6 Sn2 As2 and NaSnAs

Searching for functional square lattices in layered superconductor systems offers an explicit clue to modify the electron behavior and find exotic properties. The trigonal SnAs₃ structural units in SnAs-based systems are relatively conformable to distortion, which provides the possibility to achieve structurally topological transformation and higher superconducting transition temperatures. In the present work, the functional As square lattice was realized and activated in Li_0.6 Sn₂ As₂ and NaSnAs through a topotactic structural transformation of trigonal SnAs₃ to square SnAs₄ under pressure, resulting in a record-high T_c among all synthesized SnAs-based compounds. Meanwhile, the conductive channel transfers from the out-of-plane p_z orbital to the in-plane p_x +p_y orbitals, facilitating electron hopping within the square 2D lattice and boosting the superconductivity. The reorientation of p-orbital following a directed local structure transformation provides an effective strategy to modify layered superconducting systems.

Hydrophobization of Cellulose Sheets by Gas Grafting of Palmitoyl Chloride by Using Hot Press

The purpose of this study was to investigate the improvement in the hydrophobicity of cellulose through gas grafting treatment with long chain fatty acid chloride using high pressure during pressing at high temperature. To do this, the gas grafting treatment was performed on the cellulose sheet using a hot pressing method, and then the hydrophobization effect was analyzed. It was found that the gas grafting treatment by hot pressing using high pressure during pressing at high temperature produced cellulose sheets of high hydrophobicity. Especially, it was notable that the hydrophobization efficiency enhanced with an increase of the pressing pressure. In addition, the gas grafting efficiency was improved when polyvinyl alcohol (PVA) was coated to obtain high resistance to air permeability. These results indicate that protecting the loss of fatty acid gas by coating of polyvinyl alcohol (PVA) on the cellulose sheet surface contributed to the improvement of gas grafting efficiency.

Raman Spectra and Bulk Modulus of Nanodiamond in a Size Interval of 2-5 nm

Nanodiamond in a 2-5-nm size interval (which is typical for an appearance of quantum confinement effect) show Raman spectra composed of 3 bands at 1325, 1600, and 1500 cm^-1 (at the 458-nm laser excitation) which shifts to 1630 cm^-1 at the 257-nm laser excitation. Contrary to sp²-bonded carbon, relative intensities of the bands do not depend on the 458- and 257-nm excitation wavelengths, and a halfwidth and the intensity of the 1600 cm^-1 band does not change visibly under pressure at least up to 50 GPa. Bulk modulus of the 2-5-nm nanodiamond determined from the high-pressure study is around 560 GPa. Studied 2-5-nm nanodiamond was purified from contamination layers and dispersed in Si or NaCl.

Evaluation of Assays to Quantify Infectious Human Norovirus for Heat and High-Pressure Inactivation Studies Using Tulane Virus

We compared the heat and high hydrostatic pressure (HHP) inactivation results of Tulane virus (TV), a human norovirus (HuNoV) surrogate, obtained by plaque assay, direct quantitative reverse transcription PCR (RT-qPCR), porcine gastric mucin magnetic beads (PGM-MBs) binding assay followed by RT-qPCR (PGM/PCR), and propidium monoazide (PMA) assay followed by RT-qPCR (PMA/PCR). Heat and HHP inactivation of a HuNoV genotype I.1 (GI.1) strain and a genotype II.4 (GII.4) strain was also evaluated using those molecular assays. Viruses were heat treated at 50-90 °C for 2 min and HHP treated at 100-550 MPa at initial temperatures of 4 or 21 °C for 2 min. For heat treatment, the three molecular methods significantly underestimated the inactivation of TV. It could be logically concluded that the PGM/PCR assay was better than the PMA/PCR and direct RT-qPCR assays in estimating the inactivation of HuNoV GI.1. The three molecular methods were comparable in estimating the heat inactivation of GII.4. For HHP treatment, both PGM/PCR and PMA/PCR assays were able to estimate inactivation of TV at ≤~2-log reduction levels, but significantly underestimated its inactivation at >~2-log reduction levels. The direct RT-qPCR assay was the worst method for estimating HHP inactivation of TV. It could be logically concluded that the PGM/PCR and PMA/PCR assays were comparable in estimating the HHP inactivation of GI.1 and both were significantly better than the direct RT-qPCR assay. Among the three molecular methods, the PGM/PCR assay was the best in estimating the HHP inactivation of GII.4. These results demonstrated that the PGM/PCR assay was probably the method of choice in estimating the inactivation of HuNoV GI.1 and GII.4 for heat and HHP treatments, but this method would likely result in underestimation of HuNoV inactivation.

Combined effects of high pressure processing and addition of soy sauce and olive oil on safety and quality characteristics of chicken breast meat

This study was conducted to evaluate the combined effect of high pressure (HP) with the addition of soy sauce and/or olive oil on the quality and safety of chicken breast meats. Samples were cut into 100 g pieces and 10% (w/w) of soy sauce (SS), 10% (w/w) of olive oil (OO), and a mixture of both 5% of soy sauce and 5% olive oil (w/w) (SO) were pressurized into meat with high pressure at 300 or 600 MPa. Cooking loss was lower in OO samples than SS samples. With increased pressure to 600 MPa, the oleic acid content of OO samples increased. The total unsaturated fatty acids were the highest in SO and OO 600 MPa samples. Lipid oxidation was retarded by addition of olive oil combined with HP. The addition of olive oil and soy sauce followed by HP decreased the amount of volatile basic nitrogen during storage and reduced the population of pathogens. Sensory evaluation indicated that the addition of olive oil enhanced the overall acceptance and willingness to buy. In conclusion, the combination of HP with the addition of soy sauce and/or olive oil is an effective technology that can improve chemical, health, sensory qualities and safety of chicken breast.