Two-dimensional photonic crystal sensor enabled by hydrophobic hydrogen-bonded organic Frameworks@Metal-Organic frameworks for trace nerve agents detection

The development of fast and accurate sensors for nerve agents holds immense significance for homeland security and public health. However, the humidity interference from ambient environments and poor sensitivity for trace nerve agents are largely unsolved problems. To overcome the problems, a humidity-independent two-dimensional photonic crystal (2-D PC) sensor is developed by exploiting UiO-66-NH2 2-D PC with excellent sensitivity coupled to a hydrophobic hydrogen-bonded organic framework (HOFs) for detection sarin simulant dimethyl methyl phosphonate (DMMP). Selective sensing results show that the HOFs@UiO-66-NH2 2-D PC sensor presents the outstanding DMMP specificity, and the limit of detection (LOD) for DMMP response of the sensor can reach 508 ± 68 ppb at room temperature. Water-resistant experiments demonstrate that the HOFs@UiO-66-NH2 2-D PC sensor shows excellent stability even under 80% relative humidity (RH). Moreover, the sensor also exhibits a rapid response/recovery time of 1 s/3 s and can maintain excellent sensing performance under heat-treatment of 200 °C and in the long-term storage (30 days). The adsorption kinetics and the hydrogen bond interaction are conducted to elucidate the mechanism of enhanced sensing DMMP properties. These results indicate the potential application of the sensor in the trace nerve agent's detection, especially in humidity environment.

Food and environmental safety monitoring platform based on Tb(III) functionalized HOF hybrids for ultrafast detection of thiabendazole and 2-chlorophenol

Development of efficient and intelligent method for detecting harmful agrochemicals in resource-limited settings remains an urgent need to ensure food and environmental safety. Herein, a novel dual-emitting Tb3+-modified hydrogen-bonded organic framework (Tb@TBTC, TBTC is the ligand of HOF-TBTC.) with visible green fluorescence has been prepared through coordination post-synthetic modification. Tb@TBTC can be designed as a fluorescence sensor for the identification of two harmful carcinogenic pesticides, thiabendazole (TBZ) and 2-chlorophenol (2-CP) with high sensitivity, high efficiency and excellent selectivity. Tb@TBTC can also adsorb 2-CP with high adsorption rate. In realistic fruit juice and river water samples, the detection limits of Tb@TBTC toward TBZ and 2-CP are as low as 2.73 μM and 2.18 μM, respectively, demonstrating the feasibility in practical application. Furthermore, an intelligent real-time and on-site monitoring platform for 2-CP detection is constructed based on Tb@TBTC-agarose hydrogel films with the assistance of back propagation neural network, which can efficiently and accurately determine the concentration of 2-CP from fluorescence images through human-machine interaction. This work presents a facile pathway to prepare Tb@HOF fluorescent sensor for food and ecological environment safety, which is highly promising for preventing human disease and improving global public health.

Enhanced performance of enzymes confined in biocatalytic hydrogen-bonded organic frameworks for sensing of glutamate in the central nervous system

Glutamate (Glu) is a key excitatory neurotransmitter associated with various neurological disorders in the central nervous system, so its measurement is vital to both basic research and biomedical application. In this work, we propose the first example of using biocatalytic hydrogen-bonded organic frameworks (HOFs) as the hosting matrix to encapsulate glutamate oxidase (GLOD) via a de novo approach, fabricating a cascaded-enzyme nanoreactor for Glu biosensing. In this design, the ferriporphyrin ligands can assemble to form Fe-HOFs with high catalase-like activity, while offering a scaffold for the in-situ immobilization of GLOD. Moreover, the formed GLOD@Fe-HOFs are favorable for the efficient diffusion of Glu into the active sites of GLOD via the porous channels, accelerating the cascade reaction with neighboring Fe-HOFs. Consequently, the constructed nanoreactor can offer superior activity and operational stability in the catalytic cascade for Glu biosensing. More importantly, rapid and selective detection can be achieved in the cerebrospinal fluid (CSF) collected from mice in a low sample consumption. Therefore, the successful fabrication of enzyme@HOFs may offer promise to develop high-performance biosensor for further biomedical applications.

Integrating Levels of Hierarchical Organization in Porous Organic Molecular Materials

Porous organic molecular materials (POMMs) are an emergent class of molecular-based materials characterized by the formation of extended porous frameworks, mainly held by non-covalent interactions. POMMs represent a variety of chemical families, such as hydrogen-bonded organic frameworks, porous organic salts, porous organic cages, C - H⋅⋅⋅π microporous crystals, supramolecular organic frameworks, π-organic frameworks, halogen-bonded organic framework, and intrinsically porous molecular materials. In some porous materials such as zeolites and metal organic frameworks, the integration of multiscale has been adopted to build materials with multifunctionality and optimized properties. Therefore, considering the significant role of hierarchy in porous materials and the growing importance of POMMs in the realm of synthetic porous materials, we consider it appropriate to dedicate for the first time a critical review covering both topics. Herein, we will provide a summary of literature examples showcasing hierarchical POMMs, with a focus on their main synthetic approaches, applications, and the advantages brought forth by introducing hierarchy.

Carbonic anhydrase-embedded Hydrogen-bonded Organic Frameworks Coating for Facilitated Offshore CO2 Fixation

Exhausted emission of carbon dioxide (CO2) from ships or offshore platforms has become one of the major contributors to global carbon emissions. Enzymes such as carbonic anhydrase (CA) have been widely used for CO2 mineralization because of their high catalytic rate. However, CA in seawater is easy to inactivate and difficult to reuse. Immobilization would be a feasible solution to address the stability issue, which, however, may cause the increase of internal diffusion resistance and the reduced catalytic activity. In this regard, design of high-performance biocatalysts for acquiring high catalytic activity and stability of CA is highly desirable. Herein, a monolithic catalyst of Filler-CA@Lys-HOF-1 (FCLH) was prepared by chemical sorption of CA on the surface of the Filler followed by the coating of Lys-HOF-1. The highest catalytic activity of FCLH was obtained by regulating the amount of HOF-1 monomer added. Due to the protection of Lys-HOF-1, the FCLH showed good tolerance against acidity and salinity, which could retain about 80.2% of the original activity after 9 h incubation in simulated seawater. The catalytic activity of FCLH could retain 85.4% of the initial activity after 10 cycles.

Thermally Conductive Self-Healing Nanoporous Materials Based on Hydrogen-Bonded Organic Frameworks

Hydrogen-bonded organic frameworks (HOFs) are a class of nanoporous crystalline materials formed by the assembly of organic building blocks that are held together by a network of hydrogen-bonding interactions. Herein, we show that the dynamic and responsive nature of these hydrogen-bonding interactions endows HOFs with a host of unique physical properties that combine ultraflexibility, high thermal conductivities, and the ability to "self-heal". Our systematic atomistic simulations reveal that their unique mechanical properties arise from the ability of the hydrogen-bond arrays to absorb and dissipate energy during deformation. Moreover, we also show that these materials demonstrate relatively high thermal conductivities for porous crystals with low mass densities due to their extended periodic framework structure that is comprised of light atoms. Our results reveal that HOFs mark a new regime of material design combining multifunctional properties that make them ideal candidates for gas storage and separation, flexible electronics, and thermal switching applications.

Chiral hydrogen-bonded organic frameworks used as a chiral stationary phase for chiral separation in gas chromatography

Hydrogen-bonded organic frameworks (HOFs) are two dimensional (2D) or three dimensional (3D) porous crystalline materials constructed by Hydrogen bond interaction. In recent years, a variety of functional HOF materials have been successfully synthesized and used in structural identification, environmental pollutant removal, chiral resolution, drug delivery, fluorescence sensing, etc. Here, we first reported that a HOF to coated capillary column for high-resolution gas chromatographic separation of a wide range of analytes, including n-alkanes, n-alcohols, polycyclic aromatic hydrocarbons, and positional isomers, especially for racemates, the HOFs column showed excellent separation repeatability and reproducibility. The relative standard deviation (RSD) values for the retention times were in the range of 0.37-2.43% for run to run (n = 3), 0.38-2.51% for day-to-day (n = 3), and 0.31-2.54% for column-to-column (n = 3), respectively. Moreover, we applied density-functional theory to calculate the adsorption of enantiomers in HOF structures. This work proved that the HOFs had great application prospects as stationary phase in gas chromatography.

Metallization-Prompted Robust Porphyrin-Based Hydrogen-Bonded Organic Frameworks for Photocatalytic CO2 Reduction

Under topological guidance, the self-assembly process based on a tetratopic porphyrin synthon results in a hydrogen-bonded organic framework (HOF) with the predicted square layers topology (sql) but unsatisfied stability. Strikingly, simply introducing a transition metal in the porphyrin center does not change the network topology but drastically causes noticeable change on noncovalent interaction, orbital overlap, and molecular geometry, therefore ultimately giving rise to a series of metalloporphyrinic HOFs with high surface area, and excellent stability (intact after being soaked in boiling water, concentrated HCl, and heated to 270 °C). On integrating both photosensitizers and catalytic sites into robust backbones, this series of HOFs can effectively catalyze the photoreduction of CO₂ to CO, and their catalytic performances greatly depend on the chelated metal species in the porphyrin centers. This work enriches the library of stable functional HOFs and expands their applications in photocatalytic CO₂ reduction.

Crystal Structure Transformation in Hydrogen-bonded Organic Frameworks via Ion Exchange

Hydrogen-bonded organic frameworks (HOFs) have emerged as rapidly growing porous materials while established permanent porosities are very fragile and difficult to stabilize due to weak hydrogen-bonding interactions among building units. Herein, we report a stable hydrogen-bonded metallotecton framework (termed as HOF-ZJU-102) that was constructed through hydrogen-bonding networks between cationic metal-organic complexes [Cu₂ (Hade)₄ (H₂ O)₂ ]⁴⁺ (Hade=adenine) and GeF₆ ^2- anions. The framework not only shows permanent porosity, but also exhibits efficient separation performance of C₂ H₂ /C₂ H₄ at room temperature. More interestingly, its crystal structure could be irreversibly transformed into isostructural counterpart HOF-ZJU-101 by ion exchange in the SiF₆ ^2- containing solution, evidenced by multiple characterization techniques including gas sorption measurements, ¹⁹ F NMR spectra, FTIR and EDS. Utilizing such an ion exchange mechanism, the collapsed HOF-ZJU-102 could be restored into HOF-ZJU-101 by simply soaking in the salt solution.