The effect of denosumab and alendronate on trabecular plate and rod microstructure at the distal tibia and radius: A post-hoc HR-pQCT study

BACKGROUND

Age-related trabecular microstructural deterioration and conversion from plate-like trabeculae to rod-like trabeculae occur because of unbalanced rapid remodeling. As denosumab achieves greater remodeling suppression and lower cortical porosity than alendronate, we hypothesized that denosumab might also preserve trabecular plate microstructure, bone stiffness and strength more effectively than alendronate.

METHODS

In this post hoc analysis of a phase 2 study, postmenopausal women randomized to placebo (P, n = 74), denosumab (D, n = 72), or alendronate (A, n = 68). HR-pQCT scans of the distal radius and tibia were performed at baseline and Month-12 (M12). Trabecular compartment was subjected to Individual Trabecula Segmentation while finite element analysis was performed to estimate stiffness and strength. Percent change from baseline at M12 of each parameter was compared between patient groups.

RESULTS

At the distal tibia, in the placebo group, plate surface area (pTb.S, -1.3%) decreased while rod bone volume fraction (rBV/TV, +4.5%) and number (rTb.N, +2.1%) increased. These changes were prevented by denosumab but persisted despite alendronate therapy (pTb.S: -1.7%; rBV/TV: +6.9%; rTb.N: +3.0%). Both treatments improved whole bone stiffness (D: +3.1%; A: +1.8%) and failure load (D: +3.0%; A: +2.2%); improvements using denosumab was significant compared to placebo (stiffness: p = 0.004; failure load: p = 0.003). At the distal radius, denosumab increased total trabecular bone volume fraction (BV/TV, +3.4%) and whole bone failure load (+4.0%), significantly different from placebo (BV/TV: p = 0.044; failure load: p = 0.046). Significantly different effects of either drug on plate and rod microstructure were not detected.

CONCLUSIONS

Denosumab preserved trabecular plate microstructure. Alendronate did not. However, estimated strength did not differ between denosumab and alendronate treated groups.

Different subchondral trabecular bone microstructure and biomechanical properties between developmental dysplasia of the hip and primary osteoarthritis

Objective

Developmental dysplasia of the hip (DDH) is recognized as a frequent cause of secondary osteoarthritis (OA). The purpose in this study was to compare structural and biomechanical properties of subchondral trabecular bone ​and its relationship with cartilage damage between patients with DDH and patients with primary hip OA.

Methods

Forty-three femoral head specimens obtained from patients who underwent total hip arthroplasty [DDH, n ​= ​17; primary OA, n ​= ​16; and normal control (NC), n ​= ​10] were scanned by microcomputed tomography and analyzed by individual trabecula segmentation to obtain the microstructural types of subchondral trabecular bone. The biomechanical properties were analyzed by micro-finite element analysis, and cartilage damage was evaluated by histology. The linear regression analysis was used to indicate the association between microstructures, biomechanical property, and articular cartilage.

Results

The DDH group showed the lowest total bone volume fractions (BV/TV) and plate BV/TV in the three groups (p ​< ​0.05). There were also different discrepancies between the three groups in plate/rod trabecular number, plate/rod trabecular thickness, trabecular plate surface area/trabecular rod length, and junction density with different modes (plate-plate, rod-rod, and plate-rod junction density). The micro-finite element analysis, histology, and linear regression revealed that the subchondral trabecular bone in the DDH group had inferior biomechanical properties ​and cartilage damage of patients with DDH was more serious with different subchondral trabecular bone microstructures.

Conclusion

Our findings detected deteriorating subchondral trabecular bone microstructures in patients with DDH. The mass and type of subchondral trabecular bone play a key role in mechanical properties in DDH, which might be related to cartilage damage.

The translational potential of this article

Our findings suggested that changes of subchondral trabecular bone play a critical role ​in DDH progression and that the improvement on subchondral trabecular bone may be a sensitive and promising way in treatment of DDH.

Differences in bone quality and strength between Asian and Caucasian young men

This is a cross-sectional study to assess differences in bone quality in young Asian and Caucasian (n = 30/group) men between 25 and 35 years. We found that Asians had smaller bones, thicker and denser cortices, and more plate-like trabeculae, but stiffness did not differ between groups.

INTRODUCTION

We conducted a cross-sectional study to assess differences in bone quality in young Asian and Caucasian (n = 30/group) men between 25 and 35 years.

METHODS

We measured bone mineral density (BMD) at the spine, total hip (TH), femoral neck (FN), and forearm by dual energy X-ray absorptiometry (DXA), and bone geometry, density, microarchitecture, and mechanical competence at the radius and tibia by high-resolution peripheral quantitative computed tomography (HR-pQCT) with application of individual trabecula segmentation (ITS) and trabecular and whole bone finite element analysis (FEA). We measured load-to-strength ratio to account for differences in bone size and height, respectively. We used Wilcoxon rank sum and generalized linear models adjusted for height, weight, and their interaction for comparisons.

RESULTS

Asians were 3.9 % shorter and weighed 6.5 % less than Caucasians. In adjusted models: by DXA, there were no significant race-based differences in areal BMD; by HR-pQCT, at the radius, Asians had smaller total and trabecular area (p = 0.003 for both), and denser (p = 0.01) and thicker (p = 0.04) cortices at the radius; by ITS, at the radius Asians, had more plate-like than rod-like trabeculae (PR ratio p = 0.01), greater plate trabecular surface (p = 0.009) and longer rod length (p = 0.002). There were no significant race-based differences in FEA or the load-to-strength ratio.

CONCLUSIONS

Asians had smaller bones, thicker and denser cortices, and more plate-like trabeculae, but biomechanical estimates of bone strength did not differ between groups. Studies are needed to determine whether these differences persist later in life.

Young adults with cystic fibrosis have altered trabecular microstructure by ITS-based morphological analysis

Young adults with cystic fibrosis have compromised plate-like trabecular microstructure, altered axial alignment of trabeculae, and reduced connectivity between trabeculae that may contribute to the reduced bone strength and increased fracture risk observed in this patient population.

INTRODUCTION

The risk of fracture is increased in patients with cystic fibrosis (CF). Individual trabecular segmentation (ITS)-based morphological analysis of high-resolution peripheral quantitative computed tomography (HR-pQCT) images segments trabecular bone into individual plates and rods of different alignment and connectivity, which are important determinants of trabecular bone strength. We sought to determine whether alterations in ITS variables are present in patients with CF and may help explain their increased fracture risk.

METHODS

Thirty patients with CF ages 18-40 years underwent DXA scans of the hip and spine and HR-pQCT scans of the radius and tibia with further assessment of trabecular microstructure by ITS. These CF patients were compared with 60 healthy controls matched for age (±2 years), race, and gender.

RESULTS

Plate volume fraction, thickness, and density as well as plate-plate and plate-rod connectivity were reduced, and axial alignment of trabeculae was lower in subjects with CF at both the radius and the tibia (p < 0.05 for all). At the radius, adjustment for BMI eliminated most of these differences. At the tibia, however, reductions in plate volume fraction and number, axially aligned trabeculae, and plate-plate connectivity remained significant after adjustment for BMI alone and for BMI and aBMD (p < 0.05 for all).

CONCLUSIONS

Young adults with CF have compromised plate-like and axially aligned trabecular morphology and reduced connectivity between trabeculae. ITS analysis provides unique information about bone integrity, and these trabecular deficits may help explain the increased fracture risk in adults with CF not accounted for by BMD and/or traditional bone microarchitecture measurements.

Deterioration of trabecular plate-rod and cortical microarchitecture and reduced bone stiffness at distal radius and tibia in postmenopausal women with vertebral fractures

Postmenopausal women with vertebral fractures have abnormal bone microarchitecture at the distal radius and tibia by HR-pQCT, independent of areal BMD. However, whether trabecular plate and rod microarchitecture is altered in women with vertebral fractures is unknown. This study aims to characterize the abnormalities of trabecular plate and rod microarchitecture, cortex, and bone stiffness in postmenopausal women with vertebral fractures. HR-pQCT images of distal radius and tibia were acquired from 45 women with vertebral fractures and 45 control subjects without fractures. Trabecular and cortical compartments were separated by an automatic segmentation algorithm and subjected to individual trabecula segmentation (ITS) analysis for measuring trabecular plate and rod morphology and cortical bone evaluation for measuring cortical thickness and porosity, respectively. Whole bone and trabecular bone stiffness were estimated by finite element analysis. Fracture and control subjects did not differ according to age, race, body mass index, osteoporosis risk factors, or medication use. Women with vertebral fractures had thinner cortices, and larger trabecular area compared to the control group. By ITS analysis, fracture subjects had fewer trabecular plates, less axially aligned trabeculae and less trabecular connectivity at both the radius and the tibia. Fewer trabecular rods were observed at the radius. Whole bone stiffness and trabecular bone stiffness were 18% and 22% lower in women with vertebral fractures at the radius, and 19% and 16% lower at the tibia, compared with controls. The estimated failure load of the radius and tibia were also reduced in the fracture subjects by 13% and 14%, respectively. In summary, postmenopausal women with vertebral fractures had both trabecular and cortical microstructural deterioration at the peripheral skeleton, with a preferential loss of trabecular plates and cortical thinning. These microstructural deficits translated into lower whole bone and trabecular bone stiffness at the radius and tibia. Our results suggest that abnormalities in trabecular plate and rod microstructure may be important mechanisms of vertebral fracture in postmenopausal women.

Trabecular plates and rods determine elastic modulus and yield strength of human trabecular bone

The microstructure of trabecular bone is usually perceived as a collection of plate-like and rod-like trabeculae, which can be determined from the emerging high-resolution skeletal imaging modalities such as micro-computed tomography (μCT) or clinical high-resolution peripheral quantitative CT (HR-pQCT) using the individual trabecula segmentation (ITS) technique. It has been shown that the ITS-based plate and rod parameters are highly correlated with elastic modulus and yield strength of human trabecular bone. In the current study, plate-rod (PR) finite element (FE) models were constructed completely based on ITS-identified individual trabecular plates and rods. We hypothesized that PR FE can accurately and efficiently predict elastic modulus and yield strength of human trabecular bone. Human trabecular bone cores from proximal tibia (PT), femoral neck (FN) and greater trochanter (GT) were scanned by μCT. Specimen-specific ITS-based PR FE models were generated for each μCT image and corresponding voxel-based FE models were also generated in comparison. Both types of specimen-specific models were subjected to nonlinear FE analysis to predict the apparent elastic modulus and yield strength using the same trabecular bone tissue properties. Then, mechanical tests were performed to experimentally measure the apparent modulus and yield strength. Strong linear correlations for both elastic modulus (r(2) = 0.97) and yield strength (r(2) = 0.96) were found between the PR FE model predictions and experimental measures, suggesting that trabecular plate and rod morphology adequately captures three-dimensional (3D) microarchitecture of human trabecular bone. In addition, the PR FE model predictions in both elastic modulus and yield strength were highly correlated with the voxel-based FE models (r(2) = 0.99, r(2) = 0.98, respectively), resulted from the original 3D images without the PR segmentation. In conclusion, the ITS-based PR models predicted accurately both elastic modulus and yield strength determined experimentally across three distinct anatomic sites. Trabecular plates and rods accurately determine elastic modulus and yield strength of human trabecular bone.

Dependence of mechanical properties of trabecular bone on plate-rod microstructure determined by individual trabecula segmentation (ITS)

Individual trabecula segmentation (ITS) technique can decompose the trabecular bone network into individual trabecular plates and rods and is capable of quantifying the plate/rod-related microstructural characteristics of trabecular bone. This novel technique has been shown to be able to provide in-depth insights into micromechanics and failure mechanisms of human trabecular bone, as well as to distinguish the fracture status independent of area bone mineral density in clinical applications. However, the plate/rod microstructural parameters from ITS have never been correlated to experimentally determined mechanical properties of human trabecular bone. In this study, on-axis cylindrical trabecular bone samples from human proximal tibia (n=22), vertebral body (n=10), and proximal femur (n=21) were harvested, prepared, scanned using micro computed-tomography (µCT), analyzed with ITS and mechanically tested. Regression analyses showed that the plate bone volume fraction (pBV/TV) and axial bone volume fraction (aBV/TV) calculated by ITS analysis correlated the best with elastic modulus (R(2)=0.96-0.97) and yield strength (R(2)=0.95-0.96). Trabecular plate-related microstructural parameters correlated highly with elastic modulus and yield strength, while most rod-related parameters were found inversely and only moderately correlated with the mechanical properties. In addition, ITS analysis also identified that trabecular bone at human femoral neck had the highest trabecular plate-related parameters while the other sites were similar with each other in terms of plate-rod microstructure.