Boosting Zinc Storage Performance of Li3 VO4 Cathode Material for Aqueous Zinc Ion Batteries via Carbon-Incorporation: A Study Combining Theory and Experiment

In the search for sustainable cathode materials for aqueous zinc ion batteries (AZIBs), vanadium (V)-based materials have garnered interest, primarily due to their abundance and multiple oxidation states. Among the contenders, Li3 VO4 (LiVO) stands out for its affordability, high specific capacity, and elevated ionic conductivity. However, its limited electrical conductivity results in significant resistance polarization, limiting its rate capability, especially under high currents. Through density functional theory (DFT) calculations, this study evaluates the electrochemical implications of carbon (C) incorporation within the LiVO matrix. The findings indicate that C integration significantly ameliorates the conductivity of LiVO. Moreover, C serves as a barrier, mitigating direct interactions between Zn2+ and LiVO, which in turn expedites Zn2+ diffusion. When considering various C materials for this role, glucose is emerged as the optimal candidate. The LiVO/C-glucose composite (LiVO/C-G) is observed to undergo dual phase transitions during charge-discharge cycles, resulting in an amorphous vanadium-oxygen (VO) derivative, paving the way for subsequent electrochemical reactions. Collectively, the insights pave a promising avenue for refining AZIB cathode design and performance.

Surface Modification of Li3VO4 with PEDOT:PSS Conductive Polymer as an Anode Material for Li-Ion Capacitors

Li₃VO₄ (LVO) is a highly promising anode material for lithium-ion batteries, owing to its high capacity and stable discharge plateau. However, LVO faces a significant challenge due to its poor rate capability, which is mainly attributed to its low electronic conductivity. To enhance the kinetics of lithium ion insertion and extraction in LVO anode materials, a conductive polymer called poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is applied to coat the surface of LVO. This uniform coating of PEDOT:PSS improves the electronic conductivity of LVO, thereby enhancing the corresponding electrochemical properties of the resulting PEDOT:PSS-decorated LVO (P-LVO) half-cell. The charge/discharge curves between 0.2 and 3.0 V (vs. Li⁺/Li) indicate that the P-LVO electrode displays a capacity of 191.9 mAh/g at 8 C, while the LVO only delivers a capacity of 111.3 mAh/g at the same current density. To evaluate the practical application of P-LVO, lithium-ion capacitors (LICs) are constructed with P-LVO composite as the negative electrode and active carbon (AC) as the positive electrode. The P-LVO//AC LIC demonstrates an energy density of 107.0 Wh/kg at a power density of 125 W/kg, along with superior cycling stability and 97.4% retention after 2000 cycles. These results highlight the great potential of P-LVO for energy storage applications.

In/Ce Co-doped Li3VO4 and Nitrogen-modified Carbon Nanofiber Composites as Advanced Anode Materials for Lithium-ion Batteries

Li₃VO₄ (LVO) is considered as a novel alternative anode material for lithium-ion batteries (LIBs) due to its high capacity and good safety. However, the inferior electronic conductivity impedes its further application. Here, nanofibers (nLICVO/NC) with In/Ce co-doped Li₃VO₄ strengthened by nitrogen-modified carbon are prepared. Density functional theory calculations demonstrate that In/Ce co-doping can substantially reduce the LVO band gap and achieve orders of magnitude increase (from 2.79 × 10^-4 to 1.38 × 10^-2 S cm^-1) in the electronic conductivity of LVO. Moreover, the carbon-based nanofibers incorporated with 5LICVO nanoparticles can not only buffer the structural strain but also form a good framework for electron transport. This 5LICVO/NC material delivers high reversible capacities of 386.3 and 277.9 mA h g^-1 at 0.1 and 5 A g^-1, respectively. Furthermore, high discharge capacities of 335 and 259.5 mA h g^-1 can be retained after 1200 and 4000 cycles at 0.5 and 1.6 A g^-1, respectively (with the corresponding capacity retention of 98.4 and 78.7%, respectively). When the 5LICVO/NC anode assembles with commercial LiNi_1/3Co_1/3Mn_1/3O₂ (NCM111) into a full cell, a high discharge capacity of 191.9 mA h g^-1 can be retained after 600 cycles at 1 A g^-1, implying an inspiring potential for practical application in high-efficiency LIBs.

Novel Li3 VO4 Nanostructures Grown in Highly Efficient Microwave Irradiation Strategy and Their In-Situ Lithium Storage Mechanism

The investigation of novel growth mechanisms for electrodes and the understanding of their in situ energy storage mechanisms remains major challenges in rechargeable lithium-ion batteries. Herein, a novel mechanism for the growth of high-purity diversified Li3 VO4 nanostructures (including hollow nanospheres, uniform nanoflowers, dispersed hollow nanocubes, and ultrafine nanowires) has been developed via a microwave irradiation strategy. In situ synchrotron X-ray diffraction and in situ transmission electron microscope observations are applied to gain deep insight into the intermediate Li3+ x VO4 and Li3+ y VO4 phases during the lithiation/delithiation mechanism. The first-principle calculations show that lithium ions migrate into the nanosphere wall rapidly along the (100) plane. Furthermore, the Li3 VO4 hollow nanospheres deliver an outstanding reversible capacity (299.6 mAh g-1 after 100 cycles) and excellent cycling stability (a capacity retention of 99.0% after 500 cycles) at 200 mA g-1 . The unique nanostructure offers a high specific surface area and short diffusion path, leading to fast thermal/kinetic reaction behavior, and preventing undesirable volume expansion during long-term cycling.

Boosting the Deep Discharging/Charging Lithium Storage Performances of Li3VO4 through Double-Carbon Decoration

With high theoretical capacity, good ionic conductivity, and suitable working plateaus, Li₃VO₄ has emerged as an eye-catching intercalation anode material for lithium storage. However, Li₃VO₄ suffers from poor electrical conductivity and 20% volume variation under deep discharging/charging conditions. Herein, we present a "double-carbon decoration" strategy to tackle both issues. Deflated balloon-like Li₃VO₄/C/reduced graphene oxide (LVO/C/rGO) microspheres with continuous electron transport pathways and sufficient free space for volume change accommodation are fabricated through a facile spray-drying method. Under deep discharging/charging conditions (0.02-3.0 V), LVO/C/rGO achieves a high intercalation capacity of 591 mA h g^-1. With high capacity and outstanding stability, LVO/C/rGO outperforms other intercalation anode materials (such as graphite, Li₄Ti₅O₁₂, and TiO₂). In situ X-ray diffraction measurement reveals that the lithium storage is realized through both solid-solution reaction and two-phase reaction mechanisms. A LVO/C/rGO//LiNi_0.8Co_0.15Al_0.05O₂ lithium-ion full cell is also assembled. In such full cell, LVO/C/rGO also demonstrates high specific capacity and excellent cycling stability. The above results manifest that the LVO/C/rGO anode has the potential to be applied in the next-generation high-performance lithium-ion batteries.

Mo6+ Doping in Li3VO4 Anode for Li-Ion Batteries: Significantly Improve the Reversible Capacity and Rate Performance

Consider the almost insulator for pure Li₃VO₄ with a band gap of 3.77 eV, to significantly improve the electrical conductivity, the novel Li₃V_1-xMo_xO₄ (x = 0.00, 0.01, 0.02, 0.05, and 0.10) anode materials were prepared successfully by simple sol-gel method. Our calculations show that, by substitute Mo⁶⁺ for V⁵⁺, the extra electron occupied the V 3p empty orbital and caused the Fermi level shift up into the conduction band, where the Mo-doped Li₃VO₄ presents electrical conductor. The V/I curve measurements show that, by Mo doping in V site, the electronic conductivity of the Li₃VO₄ was increased by 5 orders of magnitude. And thence the polarization was obviously reduced. EIS measurement results indicated that by Mo-doping a higher lithium diffusion coefficient can be obtained. The significantly increased electronic conductivity combined the higher lithium diffusion coefficient leads to an obvious improvement in reversible capacity and rate performance for the Mo-doped Li₃VO₄. The resulting Li₃V_1-xMo_xO₄ (x = 0.01) material exhibited the excellent rate capability. At a high rate 5 C, a big discharge capacity of the initial discharge capacity 439 mAh/g can be obtained, which is higher than that of pure Li₃VO₄ (only 166 mAh/g), and after 100 cycles the mean capacity fade is only 0.06% per cycle.

Enhanced Electrochemical Performance of Ultracentrifugation-Derived nc-Li3VO4/MWCNT Composites for Hybrid Supercapacitors

Nanocrystalline Li3VO4 dispersed within multiwalled carbon nanotubes (MWCNTs) was prepared using an ultracentrifugation (uc) process and electrochemically characterized in Li-containing electrolyte. When charged and discharged down to 0.1 V vs Li, the material reached 330 mAh g(-1) (per composite) at an average voltage of about 1.0 V vs Li, with more than 50% capacity retention at a high current density of 20 A g(-1). This current corresponds to a nearly 500C rate (7.2 s) for a porous carbon electrode normally used in electric double-layer capacitor devices (1C = 40 mA g(-1) per activated carbon). The irreversible structure transformation during the first lithiation, assimilated as an activation process, was elucidated by careful investigation of in operando X-ray diffraction and X-ray absorption fine structure measurements. The activation process switches the reaction mechanism from a slow "two-phase" to a fast "solid-solution" in a limited voltage range (2.5-0.76 V vs Li), still keeping the capacity as high as 115 mAh g(-1) (per composite). The uc-Li3VO4 composite operated in this potential range after the activation process allows fast Li(+) intercalation/deintercalation with a small voltage hysteresis, leading to higher energy efficiency. It offers a promising alternative to replace high-rate Li4Ti5O12 electrodes in hybrid supercapacitor applications.

Hollow-Cuboid Li3VO4/C as High-Performance Anodes for Lithium-Ion Batteries

Li3VO4 has been demonstrated to be a promising anode material for lithium-ion batteries with a low, safe voltage and large capacity. However, its poor electronic conductivity hinders its practical application particularly at a high rate. This work reports that Li3VO4 coated with carbon was synthesized by a one-pot, two-step method with F127 ((PEO)100-(PPO)65-(PEO)100) as both template and carbon source, yielding a microcuboid structure. The resulting Li3VO4/C cuboid shows a stable capacity of 415 mAh g(-1) at 0.5 C and excellent capacity stability at high rates (e.g., 92% capacity retention after 1000 cycles at 10 C = 4 A g(-1)). The lithiation/delithiation process of Li3VO4/C was studied by ex situ X-ray diffraction and Raman spectroscopy, which confirmed that Li3VO4/C underwent a reversible intercalation reaction during discharge/charge processes. The excellent electrochemical performance is attributed largely to the unique microhollow structure. The voids inside hollow structure can not only provide more space to accommodate volume change during discharge/charge processes but also allow the lithium ions insertion and extraction from both outside and inside the hollow structure with a much larger surface area or more reaction sites and shorten the lithium ions diffusion distance, which leads to smaller overpotential and faster reaction kinetics. Carbon derived from F127 through pyrolysis coats Li3VO4 conformably and thus offers good electrical conduction. The results in this work provide convincing evidence that the significant potential of hollow-cuboid Li3VO4/C for high-power batteries.

Mesoporous Li3VO4/C Submicron-Ellipsoids Supported on Reduced Graphene Oxide as Practical Anode for High-Power Lithium-Ion Batteries

Despite the enormous efforts devoted to high-performance lithium-ion batteries (LIBs), the present state-of-the-art LIBs cannot meet the ever-increasing demands. With high theoretical capacity, fast ionic conductivity, and suitable charge/discharge plateaus, Li3VO4 shows great potential as the anode material for LIBs. However, it suffers from poor electronic conductivity. In this work, we present a novel composite material with mesoporous Li3VO4/C submicron-ellipsoids supported on rGO (LVO/C/rGO). The synthesized LVO/C/rGO exhibits a high reversible capacity (410 mAh g-1 at 0.25 C), excellent rate capability (230 mAh g-1 at 125 C), and outstanding long-cycle performance (82.5% capacity retention for 5000 cycles at 10 C). The impressive electrochemical performance reveals the great potential of the mesoporous LVO/C/rGO as a practical anode for high-power LIBs.

Constructing Highly Graphitized Carbon-Wrapped Li3VO4 Nanoparticles with Hierarchically Porous Structure as a Long Life and High Capacity Anode for Lithium-Ion Batteries

Li3VO4 nanoparticles (NPs) embedded in a continuous, highly graphitized carbon network with an interconnected hierarchically porous structure (HP-Li3VO4/C) were prepared using a facile, green freeze-drying method followed by in situ carbonizing. Because of its unique microstructure, the resultant HP-Li3VO4/C exhibits excellent lithium storage performance in terms of specific capacity, cycling stability, and rate capability when used as an anode material in lithium-ion batteries (LIBs). Specifically, it delivers an extremely high capacity of 381 mAh g(-1) for up to 300 cycles at 0.2 A g(-1), and even at a rate as high as 4 A g(-1), a high reversible capacity of 275 mAh g(-1) can be retained after testing for 500 cycles. This excellent electrochemical performance can be attributed to Li3VO4 NPs wrapped with highly graphitized carbon conductive framework and hierarchically porous structure. This work may offer a new methodology for the preparation of other electrode materials for LIBs.

Surface-Amorphous and Oxygen-Deficient Li3VO4-δ as a Promising Anode Material for Lithium-Ion Batteries

Surface-amorphous and oxygen-deficient Li₃VO_4-δsynthesized by simple annealing of Li₃VO₄ powders in a vacuum shows great enhancements in both reversible capacity and coulombic efficiency for the first discharge/charge without delicate size control and carbon coating. The results are associated with the improved charge-transfer kinetics caused by the amorphous surface of Li₃VO_4-δ .