Nitrogen- and fluorine-doped bimetallic carbide as active and stable oxygen reduction reaction electrocatalyst

Nitrogen- and fluorine-doped bimetallic carbide composites with graphite matrix (abbreviated as C19Cr7Mo24/NG and C19Cr7Mo24/FG) are synthesized through carbonization at 1300 °C. The C19Cr7Mo24/NG displays an initial half-wave potential (E1/2) of 0.873 V and suffers merely 3 mV decrease in E1/2 within 60,000 CV cycles for oxygen reduction reaction (ORR) in alkaline media. A H2/O2 fuel cell testing system using the C19Cr7Mo24/NG as cathode maintains 95.9% of the initial peak power density (1.08 W cm-2) within 60,000 cycles. The C19Cr7Mo24/FG shows higher ORR activity than the C19Cr7Mo24/NG. The positive and negative charge centers caused by the N or F dopants are the critical reasons to their high activities. While F and bimetallic carbide more favor electron transfer respectively than the N and monometallic carbide. Their excellent stabilities originate from interactions among atoms due to electron transfer and the intrinsic chemical inertness of graphite and bimetallic carbides.

Recent advances in cellulose-based sustainable materials for wastewater treatment: An overview

Water pollution presents a significant challenge, impacting ecosystems and human health. The necessity for solutions to address water pollution arises from the critical need to preserve and protect the quality of water resources. Effective solutions are crucial to safeguarding ecosystems, human health, and ensuring sustainable access to clean water for current and future generations. Generally, cellulose and its derivatives are considered potential substrates for wastewater treatment. The various cellulose processing methods including acid, alkali, organic & inorganic components treatment, chemical treatment and spinning methods are highlighted. Additionally, we reviewed effective use of the cellulose derivatives (CD), including cellulose nanocrystals (CNCs), cellulose nano-fibrils (CNFs), CNPs, and bacterial nano-cellulose (BNC) on waste water (WW) treatment. The various cellulose processing methods, including spinning, mechanical, chemical, and biological approaches are also highlighted. Additionally, cellulose-based materials, including adsorbents, membranes and hydrogels are critically discussed. The review also highlighted the mechanism of adsorption, kinetics, thermodynamics, and sorption isotherm studies of adsorbents. The review concluded that the cellulose-derived materials are effective substrates for removing heavy metals, dyes, pathogenic microorganisms, and other pollutants from WW. Similarly, cellulose based materials are used for flocculants and water filtration membranes. Cellulose composites are widely used in the separation of oil and water emulsions as well as in removing dyes from wastewater. Cellulose's natural hydrophilicity makes it easier for it to interact with water molecules, making it appropriate for use in water treatment processes. Furthermore, the materials derived from cellulose have wider application in WW treatment due to their inexhaustible sources, low energy consumption, cost-effectiveness, sustainability, and renewable nature.

Nanofibers of chitosan-polycaprolactone blends as active support for photocatalytic nanoparticles: Outstanding role of chitosan in the degradation of an organic dye in water

Hybrid nanofibers of a chitosan-polycaprolactone blend containing titanium dioxide nanoparticles TiO2NPs, were prepared through electrospinning to study their adsorption and photocatalytic degradation capabilities of the model organic water pollutants, rhodamine B, RhB. To obtain uniform and bead-free nanofibers, an optimization of the electrospinning parameters was performed. The optimization was carried out by systematically adjusting the solution conditions (solvent, concentration, and polymer ratio) and instrumental parameters (voltage, needle tip-collector distance, and flow). The obtained materials were characterized by FT-IR, TGA, DSC, SEM, TEM, mechanical tensile test, and water contact angle. The photoactivity was investigated using a batch-type system by following UV-Vis absorbance and fluorescence of RhB. TiO2NPs were incorporated ex-situ into the polymer matrix, contributing to good mechanical properties and higher hydrophilicity of the material. The results showed that the presence of chitosan in the nanofibers significantly increased the adsorption of RhB and its photocatalytic degradation by TiO2NPs (5, 55 and 80 % of RhB degradation with NFs of PCL, TiO2/PCL and TiO2/CS-PCL, after 30 h of light irradiation, respectively), evidencing a synergistic effect between them. The results are attributed to an attraction of RhB by chitosan to the vicinity of TiO2NPs, favouring initial adsorption and degradation, phenomenon known as "bait-and-hook-and-destruct" effect.

Resultant effect of two different methods of incorporating metals in the hydroxyapatite structure on its mechanical properties

Metal deficiencies in synthetic hydroxyapatite (Hap), is one factor among others behind its poor mechanical reliability. Hence, compensating these deficiencies has been suggested as a possible way to improve these properties. Several studies have shown that the incorporation of metals or metal oxides appear to increase the fracture toughness and lower the brittleness of synthetic Hap. In this study, we examined the resultant effect of two different methods of incorporating metals into the Hap structure on its mechanical properties. The first method consisted of incorporating metals by replacing some calcium in the Hap structure via substitution. The second method consisted of modifying Hap by preparing (metal oxide)/Hap composites. Thus Nano powders of pure Hap, substituted Hap (Ca_10-xM_x(PO₄)₆(OH)₂), and (MO)_x /Hap composites (M = Mg, Zn) with x = 0.0, 0.1, and 0.3 were prepared by a simple low temperature technique. The (ZnO)_x/Hap nanocomposites were prepared by precipitating Zinc oxide nanoparticles in a nano Hap slurry, while the (MgO)_x/Hap composites were prepared by precipitating Hap nanoparticles in a diluted nano MgO slurry. XRD, FTIR, and SEM analysis of all prepared materials identified Hap as the only crystalline phase present, exhibiting a uniform morphology with particles in the 40-100 nm size range. EDAX analysis clearly shows the presence of Ca, P, and O in pure hydroxyapatite, Ca, P, O, Mg and Zn in both substituted Hap and (MO)_x/Hap composites. The mechanical testing consisted of evaluating Breaking force, work of fracture, and brittleness/ductility of Hap, substituted Hap, and (MO)_x/Hap composites. Our study clearly shows that the mechanical properties of Hap are much more improved by modifying Hap with metal oxides than by calcium substitution for the same quantity and type of incorporated metal. Optimum mechanical strength was obtained for the (MO)_x/Hap composites with a 0.1:1.0 MO:Hap mole ratio (M = Mg, Zn).

Improving Cyclability of Lithium Metal Anode via Constructing Atomic Interlamellar Ion Channel for Lithium Sulfur Battery

Uniform migration of lithium (Li) ions between the separator and the lithium anode is critical for achieving good quality Li deposition, which is of much significance for lithium metal battery operation, especially for Li-sulfur (Li-S) batteries. Commercial separators such as polypropylene or polyethylene can be prepared by wet or dry processes, but they can indeed cause plentiful porosities, resulting in the uneven Li ion stripping/plating and finally the formation of Li dendrites. Thence, we constructed an atomic interlamellar ion channel by introducing the layered montmorillonite on the surface of the separator to guide Li ion flux and achieved stable Li deposition. The atomic interlamellar ion channel with a spacing of 1.4 nm showed strong absorption capacity for electrolytes and reserved capacity for Li ions, thus promoting rapid transfer of Li ions and resulting in even Li ion deposition at the anode. When assembled with the proposed separator, the Coulombic efficiency of Li||Cu batteries was 98.2% after 200 cycles and stable plating/stripping even after 800 h was achieved for the Li||Li symmetric batteries. Importantly, the proposed separator allows 140% specific capacity increase after 190 cycles as employing the Li-S batteries.

Synthesis of multifunctional activated carbon nanocomposite comprising biocompatible flake nano hydroxyapatite and natural turmeric extract for the removal of bacteria and lead ions from aqueous solution

Clean water, which is free from pathogens and toxic chemicals, is vital to human health. The blue planet is encountering remarkable challenges in meeting the ever-increasing demands of clean water. The intention of this research study was to develop a water filter material that is capable of removing bacterial contaminants and heavy metals from fresh water using cost effective and easily fabricated biocompatible filter material. For this purpose, granular activated carbon (GAC) was coated with both hydroxyapatite (HAP) nanoflakes and turmeric extract (TE) (HAP/TE/GAC) which had been extracted from natural turmeric powder. In addition, GAC was coated only with HAP nanoflakes to synthesize HAP coated GAC (HAP/GAC) composite. Prepared HAP/GAC and HAP/TE/GAC were characterized using Fourier-transform infrared spectroscopy, X-ray diffractometry, scanning electron microscopy and UV–visible spectrophotometry. Antibacterial effect of the prepared nanocomposites, HAP/GAC and HAP/TE/GAC was compared with neat GAC using Gram-negative bacteria Escherichia coli. Results showed that antibacterial studies of the synthesized nanocomposites exhibit effective antibacterial activity against E. coli compared with neat GAC alone. However, the composite HAP/TE/GAC revealed better activity than HAP/GAC. Heavy metal adsorption ability of the synthesized composites was carried out using Pb²⁺ ions at room temperature at different time intervals and different pH levels. The equilibrium adsorption data were assessed via Langmuir and Freundlich adsorption isotherm models for neat GAC, HAP/GAC and HAP/TE/GAC at pH 6. The equilibrium adsorption data for GAC, HAP/GAC and HAP/TE/GAC were well fitted with both Freundlich and Langmuir isotherm models in the given Pb²⁺ concentrations. The HAP/TE/GAC composite is capable of maintaining the natural function of GAC in addition to removal of bacterial contaminants and heavy metals, which can be used as a point-of-use water filter material.

Facile modulation of cell adhesion to a poly(ethylene glycol) diacrylate film with incorporation of polystyrene nano-spheres

Poly(ethylene glycol) diacrylate (PEGDA) is a common hydrogel that has been actively investigated for various tissue engineering applications owing to its biocompatibility and excellent mechanical properties. However, the native PEGDA films are known for their bio-inertness which can hinder cell adhesion, thereby limiting their applications in tissue engineering and biomedicine. Recently, nano composite technology has become a particularly hot topic, and has led to the development of new methods for delivering desired properties to nanomaterials. In this study, we added polystyrene nano-spheres (PS) into a PEGDA solution to synthesize a nano-composite film and evaluated its characteristics. The experimental results showed that addition of the nanospheres to the PEGDA film not only resulted in modification of the mechanical properties and surface morphology but further improved the adhesion of cells on the film. The tensile modulus showed clear dependence on the addition of PS, which enhanced the mechanical properties of the PEGDA-PS film. We attribute the high stiffness of the hybrid hydrogel to the formation of additional cross-links between polymeric chains and the nano-sphere surface in the network. The effect of PS on cell adhesion and proliferation was evaluated in L929 mouse fibroblast cells that were seeded on the surface of various PEGDA-PS films. Cells density increased with a larger PS concentration, and the cells displayed a spreading morphology on the hybrid films, which promoted cell proliferation. Impressively, cellular stiffness could also be modulated simply by tuning the concentration of nano-spheres. Our results indicate that the addition of PS can effectively tailor the physical and biological properties of PEGDA as well as the mechanical properties of cells, with benefits for biomedical and biotechnological applications.

Evaluation of surface roughness of different restorative composites after polishing using atomic force microscopy

INTRODUCTION

Resin based composites are widely used aesthetic restorative materials in clinical restorative dentistry. The filler size and the percentage of fillers affects smooth surface, clinical durability, aesthetics, better optical properties, compatibility with natural enamel tissue, surface gloss, and preventing the discoloration of the restoration. The finishing and polishing of tooth-coloured restorations are necessary clinical steps for better aesthetics and longevity of restored teeth.

AIM

In this study nano composites were chosen, because these contain nano particles which provide better overall composites features, including the quality of polished surface. The aim of this study was to evaluate the surface roughness of different newer posterior composites.

MATERIAL AND METHOD

Five commercially available posterior restorative composite were tested in this study. All the specimens were polished with shofu multi step polishing system. After polishing the samples were all analyzed by atomic force microscopy which is used to study surface topography and surface morphology of materials.

RESULTS

The values of surface roughness of each specimen were statistically analyzed using Kruskal Wallis ANOVA, and Pair wise comparisons by Mann-Whitney U test setting the statistical significance at p ≤ 0.05.

CONCLUSION

Tetric Evo Ceram, Z350 exhibited less surface roughness compared to Ever X, Clearfil Majesty and Sure fil SDR. There was no statistical difference between groups regarding surface rough ness between groups.

Poly (γ-glutamic acid)/beta-TCP nanocomposites via in situ copolymerization: Preparation and characterization

A series biodegradable poly (γ-glutamic acid)/beta-tricalcium phosphate (γ-PGA/TCP) nanocomposites were prepared which were composed of poly-γ-glutamic acid polymerized in situ with β-tricalcium phosphate and physiochemically characterized as bone graft substitutes. The particle size via dynamic light scattering, the direct morphological characterization via transmission electron microscopy and field emission scanning electron microscope, which showed that γ-PGA and β-TCP were combined compactly at 80℃, and the γ-PGA/TCP nanocomposites had homogenous and nano-sized grains with narrow particle size distributions. The water uptake and retention abilities, in vitro degradation properties, cytotoxicity in the simulated medium, and protein release of these novel γ-PGA/TCP composites were investigated. Cell proliferation in composites was nearly twice than β-TCP when checked in vitro using MC3T3 cell line. We also envision the potential use of γ-PGA/TCP systems in bone growth factor or orthopedic drug delivery applications in future bone tissue engineering applications. These observations suggest that the γ-PGA/TCP are novel nanocomposites with great potential for application in the field of bone tissue engineering.

Synthesis and characterization of a chitosan based nanocomposite injectable hydrogel

The aim of the current study was to enhance the mechanical property of chitosan/β-glycerophosphate disodium salt (CS/GP) injectable hydrogels. A novel nanocomposite injectable hydrogel was prepared by introducing attapulgite (ATP) nano particles into the CS/GP hydrogels. The mechanical properties of the composite hydrogels with two different water contents were characterized by tensile test, the results shown that the tensile strength and elongation at break of composite hydrogels both increased obviously with increasing of ATP content. And, in our testing range, the maximum values of tensile strength and elongation at break were both more than 5 times larger than that of neat CS/GP hydrogel. We discussed this enhancement effect in detail by Scanning electron microscope observations (SEM) and Fourier transform infrared spectroscopy testing (FT-IR). The SEM images of composite hydrogels shown quite different from the neat CS/GP hydrogel, where the pores were more tightly and with some uniform and smaller holes dispersed on the wall. FT-IR test results revealed that the introduction of ATP increased the cross-link density because of the hydrogen bonds formation between ATP nanoparticles and CS molecules. Also, we studied the impact of ATP introduction on gelation speed through tracking the dynamic process of the sol-gel transition by means of rheological measurement, and the results shown that the reaction rate increased significantly with the increase of ATP concentration.