Removal of perfluoroalkyl acids and common drinking water contaminants by weak-base anion exchange resins: Impacts of solution pH and resin properties

The underlying chemistry of weak-base (WB) anion exchange resins (AERs) for contaminant removal from water is not well documented in the literature. To address this, batch adsorption experiments were conducted at pH 4, 7, and 10 using two representative WB-AERs (polyacrylic IRA67 and polystyrene IRA96) and two representative strong-base (SB) AERs (polyacrylic IRA458 and polystyrene A520E), of differing polymer composition, for the removal of nitrate, sulfate, 3-phenylpropionic acid (3-PPA) as surrogate for natural organic matter, and six perfluoroalkyl acids (PFAAs). Under acidic (pH 4) and neutral (pH 7) conditions, the selectivity of AERs for each contaminant was predominantly influenced by polymer composition followed by the size of the resin functional group. This result reflected the WB-AERs being fully protonated and functioning identical to SB-AERs. Isotherm model parameters revealed WB-AER had higher capacity than SB-AER with analogous polymer composition and porosity regardless of resin selectivity for each contaminant. Under basic conditions (≥ pH 10), contaminant removal by WB-AERs declined due to deprotonation of the tertiary amine functional groups. Removal of PFAAs by the more hydrophobic polystyrene WB-AER (IRA96) remained approximately constant with changing pH, which was possibly due to electrostatic interactions with remaining protonated amine functional groups on the resin.

Comparative removal of Suwannee River natural organic matter and perfluoroalkyl acids by anion exchange: Impact of polymer composition and mobile counterion

Anion exchange resin (AER) adsorption is an established technology for water treatment and groundwater remediation. Two contaminants amenable to AER treatment are natural organic matter (NOM) and per- and polyfluoroalkyl substances (PFAS), specifically anionic perfluoroalkyl acids (PFAAs) such as perfluorooctanoate (PFOA) and perfluorooctane sulfonate (PFOS). NOM is ubiquitous in natural waters and is often targeted for removal. PFAS occurrence in water resources is a human health concern. Accordingly, the goal of this research was to provide new insights on the use of AER for water treatment considering separate and combined removal of NOM and PFAAs. Batch experiments were conducted comparing polystyrene and polyacrylic AER in both chloride- and sulfate-forms using natural groundwater spiked with Suwannee River natural organic matter (SRNOM) and/or six PFAAs. The polymer composition of the AER had a significant impact on contaminant removal with polystyrene resin more effective for PFAA removal and polyacrylic resin more effective for SRNOM removal. Both resins had type I quaternary ammonium functional groups; however, the polyacrylic resin had trimethyl ammonium whereas the polystyrene resin had triethyl ammonium. Therefore, the influence of polymer composition could not be isolated conclusively from functional group chemistry. Polystyrene AER showed greater removal of PFAAs with sulfonate than carboxylate head group and 8-carbon than 4-carbon chain length. Removal of SRNOM and PFAAs by both resin polymer compositions were greater when sulfate was the mobile counterion ion than chloride. The results of this research have important implications for using AER for water treatment and remediation. Foremost, polymer composition and mobile counterion form of the resin can be selected to target specific contaminants and maximize contaminant removal. When contaminants have unique interactions with AER such as SRNOM and polyacrylic resin and PFAAs and polystyrene resin, the presence of one contaminant does not impact removal of the other contaminant.