Method for fabricating self-powered cement sensors based on gold nanoparticles

Nowadays, cement industry researchers are working hard to develop cement sensors based on nanocomposites because they can be used to develop intelligent and sustainable civil structures, self-powered, self-healing, or self-monitoring. In this light, this paper shows a methodology to obtain piezoelectric cement sensors, which produce enough energy not to require an external power source in sensing-strain applications. Mainly, two proposed experimental procedures increased the piezoelectric properties of these cement-based composites: add gold nanoparticles in the proper concentrations and apply a constant electric field during the curing stage. Firstly, the gold nanoparticles were obtained through a pulsed laser ablation system, and their particle size distribution was measured with a particle analyzer Litesizer 500 from Anton Paar, and their morphology was corroborated using a scanning electron microscope. Two concentrations (442 ppm and 658 ppm) of gold nanoparticles were obtained by changing the total ablation time. Next, we fabricated the cement sensors as described by ASTM standards C39-C39M. Hence, the cement was hand mixed with a water-to-cement ratio (w/c) of 0.47 for then poured on cylindrical molds saving the proportions recommended by the ASTM standard; in this stage, the gold nanoparticles were already part of the water ratio. Then, the cement sensors were cured under an external electric field and dried for 24 hours more in an oven to be finally ready for electromechanical characterization. Meanwhile, the electric response in altern current and the piezoelectric behavior were corroborated through electrical impedance spectroscopy and open circuit potential measurements, respectively. The piezoelectric behavior was obtained when a compressive strength was applied to the sensor, and the generated voltage was simultaneously measured. Finally, the electrical and mechanical characterization measurements were processed and analyzed using Python scripts.•The particle size and the families amount of Au NPs are affected by the ablation time.•The correct proportion of Au NPs increases the inherent piezoelectricity of cement paste.•The piezoelectric response can be addressed by coupling electric and mechanical tests.

Nanogap-tailored Au nanoparticles fabricated by pulsed laser ablation for surface-enhanced Raman scattering

Herein, gold nanoparticles (Au NPs) were synthesized by pulsed laser ablation (PLA) in a mixed-phase solvent of acetonitrile and water. The size of Au NPs and the number of graphitic carbon (GC) layers were controlled by varying the ratio of the solvent mixture. The surface-enhanced Raman scattering (SERS) of the Au NPs was investigated using 10^-3 M 4-aminobenzenethiol and 10^-4 M 4-nitrobenzenethiol as probe molecules. The SERS activity strongly depended on the nanogaps between particles owing to the formation of hot spots. In the present work, the nanogaps were controlled by changing the amount of GC layers. No GC layers were produced in water, resulting low SERS intensity. In contrast, Au NPs prepared in 30 vol% of acetonitrile showed significant SERS enhancement, which was attributed to the optimal size of the GC-coated NPs and a reasonable gap between them. The obtained results revealed that Au NPs produced by PLA in liquid could be applied in SERS-based microsensors.

Enhanced photocatalytic degradation of lindane using metal-semiconductor Zn@ZnO and ZnO/Ag nanostructures

To achieve enhanced photocatalytic activity for the degradation of lindane, we prepared metal-semiconductor composite nanoparticles (NPs). Zn@ZnO core-shell (CS) nanocomposites, calcined ZnO, and Ag-doped ZnO (ZnO/Ag) nanostructures were prepared using pulsed laser ablation in liquid, calcination, and photodeposition methods, respectively, without using surfactants or catalysts. The as-prepared catalysts were characterized by using X-ray diffraction (XRD), field-emission scanning electron microscopy, high-resolution transmission electron microscopy, ultraviolet-visible (UV-vis) spectroscopy, and photoluminescence spectroscopy. In addition, elemental analysis was performed by energy dispersive X-ray spectroscopy. The obtained XRD and morphology results indicated good dispersion of Zn and Ag NPs on the surface of the ZnO nanostructures. Investigation of the photocatalytic degradation of lindane under UV-vis irradiation showed that Zn@ZnO CS nanocomposites exhibit higher photocatalytic activity than the other prepared samples. The maximum degradation rate of lindane was 99.5% in 40min using Zn@ZnO CS nanocomposites. The radical trapping experiments verified that the hydroxyl radical (·OH) was the main reactive species for the degradation of lindane.