Structural analyses of supernatant fractions in TEMPO-oxidized pulp/water reaction mixtures separated by centrifugation and dialysis

Side reactions occurring on cellulose during 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TMEPO)-catalyzed oxidation have not been considered to be significant. Then, TEMPO-oxidized hardwood and softwood bleached kraft pulps (HBKP and SBKP) were prepared with an excess NaOCl·5H2O. Supernatant fractions (SFs) were obtained in the aqueous reaction mixtures of TEMPO-oxidized pulps by centrifugation and dialysis. The SFs with carboxyl contents of 5.0 and 4.2 mmol/g were obtained in the yields of 19 % and 30 % from HBKP and SBKP, respectively. These carboxy contents are much higher than those (2.6-2.7 mmol/g) of the precipitate fractions in the TEMPO-oxidized pulps. Solid-state 13C NMR spectra and other analyses revealed that the water-soluble β-(1 → 4)-polyglucuronic acids were predominantly present in the SFs. In addition, water-insoluble TEMPO-oxidized cellulose nanocrystals were present in the SFs, but they constituted less than ~10 % of the SFs. The mass-average degrees of polymerization (DPw) of the SFs obtained from HBKP and SBKP were 166 and 155, respectively, whereas the original HBKP and SBKP had DPw values of 1990 and 2140, respectively. These substantial depolymerization and formation of the water-soluble β-(1 → 4)-polyglucuronic acids occur on cellulose and oxidized cellulose molecules as side reactions during TEMPO-catalyzed oxidation, which should be considered for structural analyses of TEMPO-oxidized products.

Highly Stable Aqueous/Organic Hybrid Zinc-Ion Batteries Based on a Synergistic Cathode/Anode Interface Engineering

Zn-ion batteries (ZIBs) are developing rapidly due to their advantages of safety, moderate energy density, and abundant Zn-metal reserves. However, the dendritic growth and side reactions at the Zn-based anode and the dissolution of metallic elements at transition metal-based cathodes destabilize the electrode/electrolyte interface, which ultimately reduces the electrochemical performance of ZIBs. Herein, an aqueous/organic hybrid electrolyte that endows synergistic cathode/anode interfacial layers is proposed. On the anode, the ZnF2/Zn3(PO4)2-rich film induces the Zn nucleation, enabling a dendrite-free and corrosion-free electrode morphology. On the cathode, in contrast to Zn deposition anomalously on the cathode surface due to underpotential deposition during cycling in the unmodified electrolyte, the obtained interfacial film using the hybrid electrolyte inhibits the dissolution of metallic elements and avoids Zn deposition on the transition metal-based cathode. As a result, a pouch cell with a metallic Zn anode and a LiMn2O4 cathode (depth of discharge: 40%) based on the modified electrolyte maintains a capacity of 92 mAh g-1 after 235 cycles with a stable and clean cathode/anode interface. This research presents insight into the construction of a stable cathode/anode interface for long-cycling ZIBs.

Shielding polysulfides enabled by a biomimetic artificial protective layer in lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries are widely considered to be next-generation storage technologies due to their high energy density, low cost and non-toxicity. However, the soluble lithium polysulfides (LiPS) migrating to the anode side inevitably causes side reactions with the Li anode, resulting in severe corrosion of the Li anode, loss of active materials, and rapid battery failure. Therefore, it is necessary to develop effective strategies to avoid LiPS exposure to Li anodes. Herein, a stable UiO-66-ClO₄/PDMS (PDUO-Cl) biomimetic protective layer is rationally constructed by the drip coating method. The PDUO-Cl protective layer can effectively suppress the side reaction of Li metal with LiPSs/electrolyte and homogenize the Li⁺ flux, thus avoiding corrosion of the Li metal anode. As a result, the symmetric cell with the PDUO-Cl protective layer delivers a stable cycle performance greater than 1400 h under a current density of 0.5 mA cm^-2. The Li-S batteries with a PDUO-Cl protective layer still show relatively better rate performance and cycling stability (69% after 100 cycles at 0.1 C). This work provides new insights into the design of protective strategies for Li anodes in Li-S batteries.

A multifunctional protective layer with biomimetic ionic channel suppressing dendrite and side reactions on zinc metal anodes

A multifunctional graphitic carbon nitride (GCN) protective layer with bionic ion channels and high stability is prepared to inhibit dendrite growth and side reactions on zinc (Zn) metal anodes. The high electronegativity of the nitrogen-containing organic groups (NOGs) in the GCN layer can effectively promote the dissociation of solvated Zn²⁺ and its rapid transportation in bionic ion channels via a hopping mechanism. In addition, this GCN layer exhibits excellent mechanical strength to suppress the growth of Zn dendrites and the volume expansion of Zn metal anodes during the plating process. Consequently, the electrodeposited Zn presents a uniform and densely packed morphology with negligible side-product accumulation. As a result, the half-cell composed of the Cu-GCN anode can deliver a remarkable long-term cycling performance of 1000 h at 0.5 mA cm^-2 and 0.25 mAh cm^-2. A full cell assembled with MnO₂ cathode also displays improved long-term cycling performance (150 cycles at 200 mA g^-1) when the Cu-GCN@Zn composite anode is applied. This work deepens our understanding of the kinetics of ion migration in the interface layer and paves the way for next-generation high energy-density Zn-metal batteries (ZMBs).

Evaluation of three adjuvants with respect to both adverse effects and the efficacy of antibody production to the Bm86 protein

Cattle tick infestations remain an important burden for farmers in tropical area like in New Caledonia. With the development of acaricide resistance, tick vaccines should be an attractive alternative to control ticks but their efficacy needs to be improved. In this study three adjuvants were studied in an experimental tick vaccine with a Bm86 protein to assess their performance in terms of antibody productions and adverse reactions following vaccinations. The water-in-oil adjuvant ISA 61 VG led to higher antibody titers compared to a water-in-oil-in-water adjuvant ISA 201 VG and an aqueous polymeric adjuvant Montanide Gel 01. Vaccinations with these three adjuvants did not produce severe general reaction but an increase in skin thickness was observed especially with both oil-based emulsions. These results indicated that the water-in-oil adjuvant is the most interesting to use for this vaccine but local adverse reactions remain an issue.